REPAIRS REPLACEMENT OF DOORS AND WINDOWS OF JCO OR MD ACCN AT NORTH SOUTH OF MISSAMARI UNDER GE MISSAMARI

Amount

Taking down Chowkats or frames not exceeding 1.5 Sq. M each (Without taking off shutters from the frames) complete all as specified and directed.

Taking down Chowkats or frames exceeding 1.5 Sq. M but not exceeding 4 Sq. M each (Without taking off shutters from the frame) complete all as specified and directed.

Taking down shutters of any description exceeding 1 Sq. M but not exceeding 2 Sq. M each complete all as specified and directed.

Taking down shutters of any description n.exc 1 sqm each complete all as specified and directed.

Taking down wooden shutters exc 1 sqm but not exc 2 sqm and resecuring or easing & adjusting and refixing in same opening complete all as specified and directed.

Dismantling fillets, rails, posts, rafters, purlins etc. under 40 Sq. Cm in section complete all as specified and directed.

S&F second class hard wood plain fillets in rectangular or triangular in section, clean swan secured with screws or beads sectional area exc.13sq cm but n.exc.25 sq cm complete all as specified and as directed.

Dismantling of timber boarding of any description fixed in any position with nails complete all as specified and directed.

S&F 50 mm thick second class hard wood boarding with butt joints clean sawn fixed with nails in any situation (except flooring and skirting) complete all as specified and directed.

All as per item No 9 above but 20 mm thick planed both sides.

S & F facroty made Second class hard wood kiln seasoned and chemically pressure treated plain, solid, straight chowkats and frames, wrought, framed, rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and directed.

S&F 35 mm thick Flush shutters, solid core construction, with particle board core and plywood face panels, commercial type on both sides complete all as specified and directed.

S & F 35 mm thick factory made Second class hard wood kiln seasoned and chemically pressure treated Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc., (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut mitred beads for securing glass etc. complete all as specified and directed.

S&F for 2nd class hard wood 30mm thick glazed and skeleton shutter open rebated and prepared to receive glass gauge etc divided into square with rebated sash bars any number edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, gauge etc (size of members of shutters as specified in SSR Par –I section 8 Clause 8:24 (b) complete all as specified and directed.

S & F Solid pvc Door Frame of size 100mmx45 mm made out of 5mm wood grain colour PVC Sheet reinforced with MS Square etc complete all as specified and directed.

Supplying and fixing in frame at site, factory made solid panel pvc moulded door shutter 28 to 30 mm thick (style) with 2,4,or 6 raised panel design with 2 mm thick moulded PVC sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing complete all as specified and directed.

S&F for anodised Alum three track sliding window and ventiletor frame Side/Top made up 123.45 mm /44 mm 1.5 mm thick bottom 128.00 mm/ 39.15 mm / 1.63 mm aluminium section & shutter made up 69 mm / 25.40 mm/1.63 mm and 50.80 mm / 25.40 mm/ 1.63 mm thick without sash bar alum section including all necessary joining cleats,hold fast ,rubber gasket anodised snap beading,anodised alumn fittings,suitable alumn handle and locking arrangment , two track for glass and one track for aluminium wire mesh etc as directed by engr in charge. incu power coating of any colour(thick of power coating not less than 50 micron) & provision of AC hole complete all as specified and directed.

M&L fixed in repairs for 18/19 mm thick pre laminated particle board, interior grade prelaminated one side with decorative choice lamination &other side balancing white lamination fixed in screws to timber frame work complete all as specified and directed.

M&L fixed in repairs for 12 mm thick pre laminated particle board, interior grade prelaminated one side with decorative choice lamination &other side balancing white lamination fixed in screws to timber frame work complete all as specified and directed.

S&F framed work such as grills, gratings, etc with ends of bars shouldered and/or revited, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work confirming to Fe.290. Gde-E-165 complete all as specified and directed.

Taking down/Dismantlinig wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.

Supply and fix in repairs curtain rods, mild steel, chromium plated fixed alongwith 2 Nos. of brackets, stops, rollers, Knobs etc, complete all as specified.

S & F 4 mm thick Sheet glass, ordinary quality and glazing with wooden beads in squares not exceeding 0.5 Sq. M in each pane complete all as specified and directed.

M&L for Plain Cement Concrete Type B1 1:2:4 (using 20 mm graded granite stone aggregate) as in hold fast complete all as specified and directed.

Supply and Fix mild steel flat iron as in holdfast including taming and sanding complete all as specified and as directed

Hacking out old broken glass ( any thick ness, size, quality or description) from metal frame including punching or drilling out old glazing pins/spring clips and providing and fixing new ones complete all as specified and directed.

S & F 3 mm thick Sheet glass, ordinary quality and glazing with wooden beads in squares not exceeding 0.5 Sq. M in each pane complete all as specified and directed.

Supply and fixed in repair stainless steel wire cloth with 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with aluminium stapple complete all as specified and directed.

Supply and fix stainless steel wire cloth with 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with aluminium stapple complete all as specified and directed.

S & F 100 mm long medium weight, cold rolled mild steel Butt hinges and fixed complete all as specified and directed.

S & F 75 mm long medium weight, cold rolled mild steel Butt hinges and fixed complete all as specified and directed.

S & F 100 mm long Extruded Aluminium alloy handles, fabricated type, anodised complete all as specified and directed.

S & F 150 mm long Extruded Aluminium alloy handles, fabricated type, anodised complete all as specified and directed.

S & F 100 mm long Aluminium, anodised, barrel tower bolts of extruded section complete all as specified and directed.

S & F 150 mm long Aluminium, anodised, barrel tower bolts of extruded section complete all as specified and directed.

S & F 300 mm long aluminium anodised sliding door bolt and fixing clips of sheet, cast or extruded sections and fixing bolts complete all as specified and directed.

Dismantling floor, hearth or wall tiling incuilding cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the permises complete all as specified and directed.

M & L for Glazed ceramic coloured tiles in vertical surfaces 450x 350x 7 mm thick set and jointed in neat cement slurry & painted in white or colour cement to match incl sreed bed 10 mm thick in CM 1:4 complete all as specified and directed.

Taking down cement plaster on brick or stone walls, etc., including raking out joints, hacking for key, scrubbing down with water, etc complete all as specified and directed.

M&L rendering 15mm thick on other than fair faces of brick or concrete Surfaces in cement mortar 1:6 finished even and smooth complete all as specified and directed.

Dismantling wall and ceiling boards (fibre, pulp, insulation etc.) any thickness, including cover fillets complete all as specified and directed.

S&F for Anodised aluminium/ GI snap grid power coated framed work of size main runner 32x24.70x0.80 mm, cross tee size 29.x24.70x0.80 mm, wall angle 22.2x22.2x0.65 mm and size of grid 605x605 mm for false ceiling all as specified with 4mm thick GI suspender complete all as specified and as directed.

M & L for 4m thick Non Asbestos designed Cement E board incl two coats of distempering in one side as approved by GE of size fixed 600mm x 600mm fixed in ceiling as specified and directed.

M&L for preparation of new plastered surfaces of walls and applying two coats of acrylic distemper including one coat of chalk whiting on plastered surface to prepara-tory to distempering complete all as specified and directed.

M&L for preparation of old surfaces of walls by brooming down or by steel wire brushing and applying one coat cement base paint complete all as specified and as directed.

M & L for preparation of new or previously treated wood surfaces of any description, over 10 cm width or girth, not otherwise described appling one coat of pink primer over applying two coat of synthetic enamel paint complete all as specified and as directed.

M & L for preparation of new or previously treated steel surfaces of any description, over 10 cm width or girth, not otherwise described appling one coat of Red Oxide, zinc chorme and applying two coat of synthetic enamel paint complete all as specified and as directed.

DHIRAJ SAHARIA

RC Madan

Markson