Widening and strengthening work of Km 94 to 103 of Nighasan Palia Dhanaraghat Puranpur (M.D.R. No. 002-C) under the State Road Fund in the financial year 2023-24. in district Pilibhit (length-10 km)

Amount

Scarifying the existing bituminous surface to a depth of 50 mm and disposal of scarified material with in all lifts and leads upto 1000 metres as per MORTH Specification section 300, 500 etc. complete in all respects.

Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, up to a lead of 1000 metres including removal and disposal of top organic soil not exceeding 150 mm in thicknessas per MORTH Specification section 200 complete in all respects.

Excavation for roadwork in soil with hydraulic excavator including cutting and loading in tippers, trimming bottom and side slopes, in accordance with requirements of lines, grades and cross sections, and transporting to the embankment location within all lifts and lead upto 1000m

Construction of embankment with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacting to meet requirement of table 300-2 of MORTH specifications, as per MORTH Specifications section 300 complete in all respects.

Construction of embankment with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacting to meet requirement of table 300-2. (Carted Upto 3.00 Km) As per MORTH Specification. Clause 305 (3.16)

Construction of sub-grade and earthen shoulders with approved material obtained from borrow pits with all lifts & leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of table No. 300-2 of MORTH specifications, as per MORTH Specifications section 300 complete in all respects.

Construction of sub-grade and earthen shoulders with approved material obtained from borrow pits with all lifts & leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of MORTH Specifications Section 300, table No. 300-2 of MORTH specifications section 300 complete in all respects. (Carted Upto 3.00 Km)

Construction of granular sub-base Grading 1 by providing close graded Material, mixing in a mechanical mix plant at OMC, carriage of mixed Material to work site, spreading in uniform layers with motor grader on prepared surface and compacting with vibratory power roller to achieve the desired density, as per section 400 of MORTH specifications complete in all respects.

Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Material by tipper to site, laying With 1% OPC grade cement and 3.5% Emulsion (Hincol) in uniform Single layers with paver in sub- base / base course on well prepared surface and compacting with vibratory roller to achieve the desired density, as per MORTH Specification section 400, 500, relevant IRC Codes and UP PWD Circulars issued from time to time, complete in all respects.

Providing and laying dense graded bituminous macadam Grading 2 with 80 - 100 TPH capacity batch type HMP using crushed aggregates of specified grading, premixed with bituminous binder VG-30 (IOC/HPCL) @ 4.5 per cent, mini., by weight of total mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MoRTH specification section 500 complete in all respects.

Providing and applying tack coat with VG-10 (IOC/HPCL) using bitumen pressure distributor at the rate of 0.20 kg per sqm on the prepared bituminous surface cleaned with mechanical broom as per MORTH Specifications section 500 / relevant IRC codes complete in all respects.

Providing and laying bituminous concrete Grading 2 with higher capacity batch type hot mix plant using crushed aggregates of specified grading, premixed with bituminous binder VG-30 (IOC/HPCL) @ 5.4 per cent, mini., of mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MORTH specifications 500 complete in all respects.

Earth work in excavation of foundation of structures as per drawing and technical specification, including setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom and backfilling with approved materialas per MORTH Specification section 200, 300 complete in all respects.

PCC Grade M15 Using Batching Plant complete in all respects as per MORTH specifications Section 1700, 1000, 2100, 2200, 2300

Sand Filling in Foundation Trenches as per Drawing & Technical Specification section 300 complete in all respects.

Brick Masonry Work in Cement Mortar 1:3 in Foundation complete excluding Pointing and Plastering, as per Drawing and Technical Specifications section 1300 complete in all respects.

Cement concrete with 2 cm. gauge approved stone, ballast, approved coarse sand and cement in the proportion of 3:1.5:1 including supply of all materials, labour and T&P etc. required for proper completion of the work. SOR 279(ii)

Supplying and Laying of Compacted 40 mm gauge brick ballast around and below Hume Pipe comlete in all respects as per specifications section 2800, 2900 etc. complete in all respects.

Providing and Laying of 1000 mm dia RCC Hume Pipe NP-3 Class etc. Complete in all respects as per Technical specifications section 2900, 2800 etc.

Pointing with cement mortar (1:3) on brick work in substructure as per Technical Specifications Section 1300 & 2200 etc.

Reinforced Cement Concrete grade M-25, complete in all respects as per Drawings and MORTH Technical Specifications Section 1700, 1000, 2100, 2200, 2300 etc. using Batching Plant.

Supplying, Fitting and Placing un-coated HYSD bar Reinforcement (Sail/Tata/JSPL) in Foundation complete as per Drawing and Technical Specifications section 1600 complete in all respects.

Providing and laying of 80 mm thick Interlocking cement concrete tiles (strength 300 mpa) including leveling and dressing of 25 mm sand bed, surface to required level and slope, filling joints with local sand including the cost of material, labour T&P etc.required for proper completion of work as directed by Engineer-in-Charge conforming to MORTH specifications section 400 and relevant IRC codes complete in all respects.

Providing and laying Filter material underneath pitching in slopes complete as per drawing and Technical specification. Clause No. 15.5 (2504).

Providing and laying boulders apron on river bed for protection against scour with stone boulders weighing not less than 40 kg each complete as per drawing and Technical specification. Clause No. 15.1 (2503).

MAHENDRA SINGH

M/s Raj Laxmi Enterprises