REPAIRS TO ROADS AND ROAD FURNITURES AT NAGTALAO UNDER GE BANAR

Amount

M&L for preparing black top surfaces of roads by brushing with wire brush for removing cracked mud etc., sweeping with brooms and finally fanning the cleaned surfaces with gunny bags to remove all loose dirt etc. complete all as specified and directed.

M&L for laying 30mm consolidated thick bituminous premix semi dense asphaltic concrete with 5.5% binder content by weight of total mix using VG-40 paving bitumen, rolled and consolidated to required gradient and camber using vibromax power roller of 8 to 12 tonne capacity complete all as specified and directed

Repair to potholes, any depth not exceeding 1.0 sqm each, any depth exceeding 30mm, including sweeping free from dust & mud or water, scoring sunken surfaces in roads, paths, etc. cutting around edges to at least 25mm in depth, making good by filling in screened & graded road metal, watering and well rammed (including supply of road metal) and inspected and approved before laying the premix carpet complete all as specified and directed.

M&L for preparing bituminous road surfaces and marking/painting lines, dashes, arrows, letters etc. on roads, pavements and the like not exceeding 10cm wide, 2mm thick with retro reflective Thermoplastic road marking Paint of approved colour, all as per BS-3262-1989 specifications, with 8% glass beads laid in 160 degree centigrade by special applicator machine complete all as per manufacturer's instructions and as directed.

S&F in repair solar cat eyes (studs) made of aluminum daicasted body, 100% water proofing design according to 65, both side reflectors of size 125mm x 125mm x 25mm (shank not less than 66mm), of high efficiency mono crystalline solar panel 2.5V/ 0.3 watt one Ni-Mh or Ni-ed rechargeable battery (1.2V/ 1600MA) consisting of six super bright LED with 10,000 to 18,000 mcd, view distance upto 1000 meters and flush road bearing capacity 10 MT, fixed in road by drilling hole and epoxy hardener etc, as per manufactures instructions complete all as specified and directed

S&F in Cat eye, reflective type of metal body alloy of size 120mm x 110mm x 24mm with PAMA stripes reflector of fixed with and including MS studs of suitable size as per manufactures instructions complete all as specified and directed

S&F metal tubular solar delineator made out of ABS round body fitted with 2 Nos of 65mm dia highly reflective reflectors made of PMMA and mounted on 45'50mm dia MS Pipe medium weight of 600mm height, duly powdered coated and thermoplastic elastomer 3 bands of green, red and yellow reflector, radium tape of 25mm wide strips with anti theft metal net for reflector protection, including embedded in PCC 1:2:4, type B1 using 20mm graded stone aggregate foundation of size 150 x 150 x 300mm complete all as specified and directed

Surface excavation not exceeding 30 cm deep and averaging 15 cm deep in hard/dense soil for repair road side berms complete all as specified and directed.

Removing excavated soil and depositing at a distance not exceeding 50m and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and directed.

M&L for red bajri/ Moorum filling, laid in layers not exceeding 15cm thick, spread, rolled and consolidated to required gradient alongside paved roads as in berms including watering & rolling complete all as specified and directed

M&L for applying evenly a priming/tack coat with bituminous primer of paving bitumen VG-10 grade @ 5 Kg per 10 Sqm over bituminous surfaces complete all as specified.

MOHIT ENTERPRISES

D DEV COMPANY

ABHOG INFRASTRUCTURE PRIVATE LIMITED