Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹39.9 LAccepted-AOC 18 837 KILIYARAA HOUSE PERUMPADAPPU PALLURUTHY PO KOCHI 682 006 | KOCHI | ERNAKULAM | KERALA | 682006 | L1 | Accepted-AOC Being L1 and Reasonable | |
| 2 | L2₹40.6 L+₹70,355.10 (1.76%)Rejected-Finance | L2 | Rejected-Finance Other than lowest bidder | |
| 3 | L3₹40.8 L+₹92,705.26 (2.33%)Rejected-Finance CHOORAKULATH NEAR GOVT HOSPITAL KUMBALANGHI KOCHI 682 007 | KOCHI | ERNAKULAM | KERALA | 682007 | L3 | Rejected-Finance Other than lowest bidder | |
| 4 | L4₹42.5 L+₹2.7 L (6.69%)Rejected-Finance MUNICIPAL BUILDING NEHRU PARK AVENUE BANK JUNCTION ALUVA ERNAKULAM ERNAKULAM KERALA 690573 | KOLLAM | KERALA | 690573 | L4 | Rejected-Finance Other than lowest bidder | |
| 5 | L5₹46.3 L+₹6.4 L (16.0%)Rejected-Finance | L5 | Rejected-Finance Other than lowest bidder |
Tender Value
₹43.4 L
EMD Value
₹86,800
Closing Date
27 Apr 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE(NW)KOCHI
GARRISON ENGINEER (NW) MILITARY ENGINEER SERVICES NAVAL BASE POST -682 004
AS PER BOQ AND TENDER DOCUMENT
2024_MES_648893_1
8330_GE_NW
Open Tender
Civil Works
Item Rate
180 days
KOCHI
AS PER TENDER DOCUMENT
7 documents required · 7 mandatory
₹500
GE(NW)KOCHI
₹86,800
Yes
26 Nov 2024
1 Apr 2024
29 Apr 2024
1 Apr 2024
27 Apr 2024
15 Apr 2024
1 Apr 2024 - 20 Apr 2024
Amount
Surface excavation in soft and lose soil n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out complete all as specified and directed
Removal of excavated material (Soil) n. exc. 50 mtr and deposting where directed at level n.exc. 1.50 mtr above starting point complete all as specified and directed
Material and labour for PCC 1:4:8 type D2 in foundations, filling and mass concrete complete all as specified and directed
Supply and fix steel work in tubular trusses including special shaped washer etc complete using ERW or induction butt welded tubes conforming to IS 1161-1979 grade St-240 complete all as specified and directed.
Supply and fix prepainted galvalume zinc coating GI based plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall fixed with self tapping screws complete all as specified and as directed.
Supply and fix prepainted galvalume zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall fixed with self tapping screws complete all as specified and as directed.
Supply, Providing and fixing suspended false ceiling consisiting of 12mm thick Gypsum seamless board suspended on GI frame work with staggered joints, GI frame work to consist GI perimeter channel 25mm x20mm of 22 gauge along perimeter of false ceiling. Channel section of 50x25mm of 22 gauge and at 300mm C/C throughout one way fixed with Screw/nut bolt and other direction 40 x 15mm x 22 gauge channel provided for interlocking with GI cleat and expansion fasteners including hangers 6mm dia G.I. fixed to roof truss, Boards are to be joined and finished so as to have a flush look which includes finishing the tapered and square edges of the gypsum board with joining compound paper tape and two coat plastic emulsion paint over one coats of primer & one layer putty 1.5mm thick suitable for gypsum board including necessary scaffolding and shuttering complete all as specified and as directed.
Material and labour for preparation of new Surfaces of any description, over 10cm in width or girth,not otherwise described and applying two coats of anti corrosive Epoxy paint over a coat of Epoxy primer complete all as specified and as directed.
Supply and fix 220mm wide rectangular UPVC heavy duty ready made eaves gutter of pressure rating 6 Kg/cm2 of approved make including necessary fitting like centre drop, centre joint, End cap , end drop, elbow drop and clap etc complete all as specified and as directed.
Material and labour for Damp proof course to horizontal or vertical surfaces including necessary formwork, 40 mm thick, in Cement concrete 1:2:4 type B0 (using 12.50mm graded stone aggregate) complete all as specified and as directed.
Material and labour for applying evenly a tack coat of bitumen 85/25 at the rate of 1.2Kg/sq.m. including cleaning surfaces complete all as specified and as directed.
Material and labour for polythene film, 150 micron thick, laid over a coat of bitumen primer complete all as specified and as directed. (Note- bitumen primer shall be measured and paid seperately)
Material and labour for precast cement concrete block masonary with solid blocks exceeding 10 cm width type C1 1:3:6 using 20mm graded stone aggregate set in CM 1:6, complete all as specified and directed
Material and labour for cement plaster 10 mm thick in cement mortar 1:6 finished even and smooth without using extra cement complete all as specified and directed.
Material and labour for rendering 20 mm thick in two layer, back coat 12mm thick in cement mortar 1:6 and subsequent coat of 8mm thick in cement mortar 1:4 mixed with water proofing compound 3% by weight of cement on fair faces of brick work or concrete surfaces finished even and fair without using extra cement complete all as specified and directed (Note- water proofing compound shall be measured and paid seperately)
Supply only Integral waterproofing compound.
Material and labour for preparation of newly plastered external wall surfaces and applying two coats of weather proof paint over a coat of suitable primer over a coat of sealent base coat, complete all as specified and as directed
Material and labour for preparation of newly plastered wall surfaces and applying two coats of oil bound distemper white or tinted over a coat of primer complete all as specified and as directed
Material and labour for Moorum/red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled and rammed including watering complete all as specified.
Material and labour for hardcore of broken stone or boulders gauge n exc. 63 mm, deposited, spread and levelled in layers n exc.15 cm thick, watered and rammed to a true surface complete all as specified and as directed
Material and labour for 100mm thk PCC 1:2:4 Type B-2 using 40 mm graded stone aggregate as in floor/ paving/ hard standings and similar works complete all as specified and as directed
Material and labour for light shade vitrified cermaic tiles 10mm thick square area of each tile exc. 0.36 Sqm but n, exc 0.42 sqm in floors etc set and joint in neat cement slurry 3mm wide joints shall be maintained with spacers which is to be filled with epoxy grout using masking tape and the masking tape is to removed after filling the epoxy grout including15 mm thick screed in CM 1:6 complete all as specified and as directed Note: Quoted rate shall be inclusive of screed bed
All as per item No:8 here-in-before but on vertical surfaces as skirting over and including 10mm thick rendering in cement mortar 1:4 complete all as specified and as directed. Note: Quoted rate shall be inclusive of backing coat
Material and labour for Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry 3mm wide joints shall be maintained with spacers which is to be filled with epoxy grout using masking tape and the masking tape is to removed after filling the epoxy grout over and including15mm thick screed bed of CM 1:6 all as specified and as directed. Note: Quoted rate shall be inclusive of screed bed
Material and labour for glazed coloured ceramic tiles in vertical surfaces 600x300x7 mm thick in vertical surface set and joint in neat cement slurry and pointed in white cement or coloured cement to match the shade over and ioncluding 10 mm thick rendering CM 1:4 complete all as specified and as directed. Note: Quoted rate shall be inclusive of backing coat
Material and labour for 75 mm thick PCC type C-2 1:3:6 using 40 mm stone aggregate as in plinth protection complete all as specified and as directed..
Material and labour for forming Construction joint 30mm deep x 10mm wide filled with sealing compound 'A' grade complete all as specified and directed.
Supply and fix 2nd class hard wood solid striaght chowkhats & door frames, rebated on the solid, rounded or chamferred put together with glue pinned at joints complete all as specified and directed.
Supply and fix 2nd class hard wood, 35mm thick factory made door shutters plain framed, panelled shutter with lock rail and panel of 12mm thick veneered water proof particle board the size of rails and stile as per IS -1003 complete all as specified and directed.
Material and labour for preparation of two coats of synthetic enamel paint over a coat of pink primer on new wooden surfaces of any description, not otherwise described, over 10cm width or girth complete all as specified and directed.
Supply and fix solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S Square tube, supplying & fixing in opening as per specification & drawing complete all as specified and directed
Supply and fix factory made Solid PVC Moulded Door Shutters 28 to 30 mm thick (stile:) with wood free EPS, with 2,4 or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front Face & 2mm Plan colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing complete all as specified and directed
Supply and fix extruded aluminium alloy handle 150 mm fabricated type anodised complete all as specified and directed
Supply and fix 100 mm size, butt hinges medium weight (cold rolled mild steel) stainless steel complete all as specified and directed
Supply and fix 200mm long aluminium anodized barrel tower bolt of extruded section complete all as specified and directed
Supply and fix 250 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed
Supply and fix powder coated aluminium frame for doors, windows, ventilators & aluminium partition with one or more rebates including joining cleat for fixing etc. complete all as specified and directed . Note:Glazing and aluminum hard ware shall be measured & paid separately
Supply and fix powder coated aluminium window and ventilator shutters, top hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 nos.) suitable handle (1 no.) complete all as specified and directed
Supply and fix Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed.
Supply and fix 3mm thick Figured glass, pin head type and glazing with oil putty in squares n exc 0.5 sq. m in each pane complete all as specified and directed.
Supply and fix 4.0mm thick Sheet glass, ordinary quality and glazing with oil putty in square exc 0.5 Sqm in each pane complete all as specified and directed.
Material and labour for 18/19 mm thick Pre-laminated particle board, exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work complete all as specified and directed.
Supply and fix aluminium anodised grill, having mesh size 50mm x 50mm (hexagonal shape) made out of 6 mm wide 3 mm thick aluminium section including U clips and all necessary fixing arrangements, complete all as specified and as directed .
Supply and fix 4mm thick coloured/wooden grain aluminium composite panel (as approved) cladding to PVC rainwater pipe/RCC column etc and including aluminium framing complete all as specified and directed.
Supply and fix Aluminium(Die cast) body Door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified and directed
Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams, soffit of slab and similar work; vertical or to batter complete all as specified and directed
Material and labour for TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends, including stirrups and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed
Material and labour for RCC M-30 Design mix concrete using 20 mm graded stone aggregate as in footings, foundation beams; plinth beams; bases for columns,etc.complete all as specified and directed.
Supply and fix 20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like over and including 15mm thick screed bed in CM (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite .complete all as specified and directed. Note: Quoted rate shall be inclusive of screed bed
Material and labour for providing and fixing stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts hinges complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement complete all as specified and directed.
Supply and fix Welded steel wire fabric to wood or steel members Weight N exc 4 kg per square metre complete all as specified and directed.
Supply and fix Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc. complete drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete Fe410W Gde E2 50 quality B complete all as specified and directed.
Supply and fix Vitreous China wash basin, white, flat back, size 630x450mm including 15 mm bore CP Pillar cock with capstan head screwed high pressure with or W/O lettered hot or cold with long screwed shank and fly nuts and PVC connections 15mm size with PTMT nuts of length 600 mm, waste chain and plug and porcelain stopper but including brackets complete all as specified and directed.
Supply and fix brass chromium plated bottle trap with inlet or outlet screwed for pipe for connection including necessary packing, union and cap (32 mm bore) complete all as specified and directed.
Supply and fix Liquid soap container of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats. (Minimum weight 105gms) complete all as specified and directed.
Supply and fix brass chromium plated towel rail 20mm dia D type, 60cm long between flanges complete all as specified and directed.
Supply and fix viterous China wash down water closet pan (pedestal pattern), white including plastic water closet seat, black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device, fixing bolts, PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets, PVC connections 15mm size with PTMT nuts of length 600 mm and Flush pipe of polyethylene of low or high density or PVC. 32 mm dia, for low level cistern complete all as specified and directed. Note: Quoted rate shall be inclusive of low level flushing cistern, PVC connections,flush pipe etc
Supply and fix Vitreous China urinals, half stall type, coloured complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; grating and Union for discharge pipe complete all as specified and directed.
Supply and fix Chinaware partition for urinal of size 310x700mm, white complete all as specified and directed.
Supply and fix Push tap high pressure suitable for urinals complete all as specified and directed.
Supply and fix CP urinal spreader for 15 mm bore fixed with urinal including CP pipe complete all as specified and directed.
Supply and fix PVC (SWR) pipes 110 mm dia single socketed in any length , with rubber rings joints fixed to wall complete all as specified and directed.
Supply and fix PVC (SWR) pipes 110 mm dia single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed.
Supply and fix PVC (SWR) pipes 75 mm dia single socketed in any length , with rubber rings joints fixed to wall complete all as specified and directed.
Supply and fix PVC (SWR) pipes 75 mm dia single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed.
Supply and fix PVC (SWR) bends 110 mm dia with access door complete all as specified and directed.
Supply and fix PVC (SWR) bends 75 mm dia with access door complete all as specified and directed.
Supply and fix PVC (SWR) 110 mm dia vent cowl complete all as specified and directed.
Supply and fix PVC (SWR) 75mm dia vent cowl complete all as specified and directed.
Supply and fix PVC Nahani floorTrap 75mm (SWR) , plain with grating including jointing with solvent or cement complete all as specified and directed.
Supply and fix for rolled mild steel in Plates Fe-410-W (grade E-250) quality A (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment complete all as specified and directed.
Supply and fix mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, length of bolt exc 15cm but not exc 22.50cm long, diameter of neck 5 to 10mm complete all as specified and as directed
Excavation in trenches n exc 1.5 m wide and n exc 1.5 m deep and getting out in loose/soft soil complete all as specified and as directed
Returning filling in including spreading levelling watering and well ramming in layers not exc 15cm thick complete all as specified and as directed
Material and labour for precast cement concrete cover slab for man hole, in type B-1 (1:2:4) using 20 mm graded stone aggregate set in cement mortar 1:6 complete all as specified and as directed (Note: Reinforcement shall be measured and paid seperately)
Material and labour for TMT bars 6mm to 8mmdia cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends, including stirrups and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed
Material and labour for 15 mm dia thick rendering on fair faces of brick or concrete surfaces in cement and sand mortar 1:4 finished even and smooth without using extra cement complete all as specified and directed
Material and labour for plain cement concrete 1:3:6 type C2 (using 40mm graded agg) as in bed to drain pipe, 110mm bore including packing under and haunching against the sides of pipes after they are laid and tested including necessary shuttering and supports to concrete complete all as specified and as directed
Material and labour for provn of RCC hume pipe septic tank for 50 users including necessary excavation in any type of soil, PCC 1:3:6 below foundation, vent shaft, connection, RFR and removal of surplus soil and with accessories like AC vent pipe, cowl, manhole cover etc including connecting to the sewer line complete all as shown in drg No.TD/A/57 sheet 1/1 complete all as specified and as directed.
Material and labour for 100 mm thick PCC 1:4:8, Type D-2 using 40 mm graded stone aggregate complete all as specified and directed.
Material and labour for Machine pressed precast concrete interlocking paver block any shape and size as approved confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade with grey cement and pigment,over and including 30mm thick coarse aggregate for granolithic floors graded from 12.5mm to 4.75mm Spreading and levelling in layers n exc. 25cm thick Add for well ramming including watering as required complete all as specified and as directed.
Material and labour for providing cement concrete Type B0, 1:2:4 (using 12.5mm graded stone aggregate) as in kerbs water troughs and the like including weathering, slightly rounded or chamfered angles and throating complete all as specified and as directed.
Material and labour for Reinforced concrete pipes class NP 2 of 150 mm dia laid and jointed complete with collarsall as specified and as directed
Material and labour for plain cement concrete 1:3:6 type C2 (using 40mm graded agg) as in bed to drain pipe, 150mm bore including packing under and haunching against the sides of pipes after they are laid and tested including necessary shuttering and supports to concrete complete all as specified and as directed
Supply and fixing 15 mm angle valve, half turn with flange, with flange type chromium plated for fixing accessories for for CPVC pipe complete specified and as directed (Make : Model No: F2008201 of Cera or equivalent make from the list of makes)
Supply and fix concealed stop cock regular body,half turn with adjustable wall flange chromium plated with CP cup fancy type of size 15mm complete all as specified and as directed
Supply and fixing of Bib cock, CP with flange and areator, fancy type long body with wall flange cast copper alloy with crutch or butterfly handle screwed for GI/ CPVC pipe of size 15 mm complete all as specified and as directed
Supply and fixing PVC connection pipe 15 mm dia ,450mm long cold water complete with brass union on both sides to suit 15mm GI/CPVC pipe complete all as specified and directed
Supply and fix on wall/ ceiling/ laying in floors or concealed on wall, high pressure CPVC pipes SDR-11 & plain CPVC SDR 11 fittings of dia 25mm including all necessay fittings, solvents complete all as specified and directed
Supply and fix on wall/ ceiling/ laying in floors or concealed on wall, high pressure CPVC pipes SDR-11 & plain CPVC SDR 11 fittings of dia 20mm including all necessay fittings, solvents complete all as specified and directed
Supply and fixing of swivel overhead shower (minimum weight 40 grams) of PTMT any colour with shower arm (minimum weight 40 grams) 15mm size, 195 mm long with bend of 45 degree with flange for fixing with CPVC pipe complete and all as specified and as directed (Make : Model No: F7020108AB of Cera or equivalent make from the list of makes)
Supply and fixing health faucet ABS body with wall hook and 1 metre SS braided rubber hose pipe , complete all as specified and directed (Make : Model No: F8030108AB of Cera or equivalent make from the list of makes)
Supply and fix Ball valves 25mm dia high pressure of PTMT with epoxy coated Aluminium rod &highdensity plastic ball screwed for iron pipe and fixed complete all specified and directed
Supply and fix Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top),3 layered, white colour, hoisted & fixed in position of capacity 1000 litres complete all as specified and as directed
Material and labour for point wiring with 1.5 Sqmm PVC insulated unsheathed with proper colour coding FRLSH multistranded single core copper conductor cable in PVC concealed conduit rigid non metallic medium grade with suitable size concealed in wall /roof except beam, colum and RCC roof including chases cutting including making good the wall surfaces matching with existing surfaces and with 1.6 mm thick MS sheet pressed terminal box (recessed) with 3 mm thick PVC laminated sheet top cover for accomading switches socket regulators etc including 1.5 Sqmm PVC insulated copper conductor as earth continuity wire for one light point controlled one ,one way switch complete all as specified and as directed
All as per item No:8 here-in-before but One fan point controlled by one ,one way switch complete all as specified and as directed
All as per item No:8 here-in-before but one 5 pin 5 amps socket outlet on independent board complete all as specified and as directed
All as per item No:8 here-in-before but for one 5 pin 5 amps socket outlet on the same board
All as per item No. 1 here in before but using with 2.5 sqmm copper conductor cables multistranded (FRLSH) PVC insulated, unsheathed cable and including 2.5 Sqmm copper conductor cable multistranded (FRLSH) PVC insulated and unsheathed cable as earth continuity wire and connecting to common earth dolly for one 6 pin 15 Amp socket outlet point on independent board complete all as specified and directed.
Supply and fix switch socket combination 5 pin 5 Amps flush type complete all as specified and as directed
Supply and fix switch socket combination 6 pin 15 Amps flush type multi purpose complete all as specified and as directed
Supply and fix switch piano flush type 5 Amps one way all as specified and directed.
Supply and fix ceiling rose surface bakelite 65 x 20 mm 3 terminals complete all as specified and as directed
Supply and fix fan regulator electronic step type 100 W, 250 Volts complete all as specified and as directed.
Supply & fix Regal Batten for LED tube lights, both side connection type and LED tube rod 1 x 20 Watt, both side connection complete all as specified and as directed. Make : Havells Cat Part No. REGALBATTENT8 upto 1x22W SSBSWH for Regal Batten & CRYSTAL 1213T8DSTL20W LED 8655 GLASS for tube rod or equivalent make from the list of makes
Supply & fix 07 W LED type mirror light fitting with tube and provided with high output diffuser including all electrical connection complete all as specified and as directed Make :Cat part no LCL-07-CDL of crompton or equivalent make from the list of makes
Supply and fix ceiling fans of 230V SP 1200mm sweep with blades, five star rated ,suitable down rods,electronic regulator with minimum air delivery 210 CFM with service value 6.00 BEE with brushless direct current motor (BLDC) complete with all accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size complete all as specified and as directed Make :Havells Cat part no - Efficiencia Neo (BLDC,26 W) of or equivalent make from the list of makes
Supply & fix exhaust fans PVC body AC single phase 230/ 240 V of size 250 mm sweep with louver complete all as specified and as directed
Supply and fix MCB SPN 6 to 32 Amp ,240 Volts,10 KA complete all as specified and as directed Make :Legrand Cat part No- 408617 or equivalent make from the list of makes
Supply and fix MCB SP 6 to 32 Amp ,240 Volts,10 KA complete all as specified and as directed Make :Legrand Cat part No- 408595 or equivalent make from the list of makes
Supply and lay cable XLPE Insulated screened PVC bedded, galvanized steel strip or wire armored, electric power cables heavy duty)1100 Volts grade with stranded aluminium conductor of size 2 core 10 sqmm laid in trenches/ ducts/ wall or through pipe etc with suitable lugs and cable glands complete all as specified and as directed
Material and labour for earthing complete with galvanized steel earth plate electrode 600 mm x 600 mmx6 mm thick burried directly in ground(earth pit not less than 2.25 metrs deep below ground level) with top edge of the plate not less than 1.5 mtrs below ground level connected to galvanized iron strip 25x4mm as earth lead by means of bolts, nuts, check nuts and washers of galvanized iron steel all shown in electric plate No 3 ( of SSR Part-i connected to earthing test pit all as specified or indicated including provn of necessery excavation and earth work in any type of soil, PCC pit ,RCC cover and frame, 20 mm bore medium grade watering pipe , water funnel, 40 mm bore GI medium grade protection pipe , common salt, charcol dust,returning, filling in of soil, removal of soil to a distance not exceding 50 mtr etc including testing on completion complete all as specified and as directed
Supply and fix Sheet metal enclosure SPN DB when MCB's to be used 12way with 200 amps bus bar double door complete all as specified and as directed
Supply and fixing LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and as directed
ARCHITRAVE CONSTRUCTIONS
Classic Builders
Omkar Manpower Consultancy
AMRITH ENGINEERS
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .