SITC of 10-inch diameter 60 hp capacity Borewell

Amount

Drilling of perfectly vertical bore hole of 20 inch/500mm diameter suitable to receive 10 inch/250 mm nominal diameter MS casing pipe, up to desired depth below ground level including all works pertaining to drilling such as transportation, installation and removal of drilling machine, mud etc. complete in all respect, in all type of collapsible strata consisting of soils, clays, sand, moorum, gravel, boulders, rocks etc.

Up to 30 mtr depth from the ground.

From 31 to 60 mtr depth.

From 61 to 90 mtr depth.

From 91 to 120 mtr depth.

From 121 to 150 mtr depth.

From 151 to 180 mtr depth.

From 181 to 210 mtr depth.

From 211 to 240 mtr depth.

From 241 to 270 mtr depth.

Providing and installing 250mm dia MS Class-C (heavy duty) 6.00mm thick (MSERW Casing Pipe) housing pipe with ISI make V-wire LCG 1.5mm screen pipe approximately 100 mtr length by hydraulic rotary method as specified. (Approved make-Jindal/TATA/Johnson). Welding charges and providing and fixing top cap, clamps, reducers, boil plug etc. complete in all respect is included in the item.

Up to 30 mtr depth from the ground

From 31 to 90 mtr depth.

From 91 to 120 mtr depth.

From 120 to 150 mtr depth.

From 201 to 240 mtr depth.

From 241 to 270 mtr depth.

Extra for providing and installating slotted/perforated MS strainer pipe 250 mm dia. & fitting it with casing pipes at all depths as directed and specified, including all transportaion and labour cost. (Make-same as above).

Providing and laying well graded gravel of size 8mm-12mm as specified and directed for packing.

Providing and fixing of well cap on top of the tube well for protection M.S.Caps 250 mm dia.

Construction of concrete block over the borewell for protection & sealing, of suitable size (Approx 3 Feet X 3 Feet) in M-25 cement concrete mix.

Providing and fixing Dia-5inch/125 mm/as suitable dia UPVC Heavy duty pipes (Aashirvad/Nihir/Precision) with complete fittings i.e. Socket, bend, tee, flange etc.for bore well. Upto the water level in the bore and draw down.

Providing and fixing gun metal non-return valve of approved quality (screwed end) 5inch /suitable size nominal bore for horizontal work.

Providing and fixing suitable analog flowmeter for daily water consumption record suitable for the above mentioned UPVC pipe. (Make-Kranti or equivalent).

Development & washing of bore well using air compressor of required pressure & rating for required number of hrs including fuel etc. complete as per the requirement.

Electrical Item

Supply of 60HP, 10 stage/suitable stage three phase submersible pump motor set suitable for 5inch/6inch UPVC Pipe, Head- minimum 200 Mtrs & as per water level requirement (Make - Kirloskar/KSB/Grundfos only). Pump model, dia, LPM discharge to be specified & approved by engineer incharge.

Installation, testing,commissioning of above rating submerssible pump set along with UPVC Pipe in the bore well.

Supplying, laying, connecting, making end terminations of 3.5CX95 Sq.mm. size 1100 volts grade armoured XLPE insulated PVC sheathed aluminium conductor armoured cable as per IS 1554 complete in wall & ground at suitable depth including excavation, boring, core cut, sand cushioning, protective covering/hume pipe and refilling etc complete as required (Make - Finolex/Havells/ KEI).

Supplying ,installation ,connecting and testing PVC insulated, PVC sheathed flat submersible of 3C x 35 sq mm copper conductor cable suitable for above pump, providing suitable PVC cable tie in the bore & up to pump panel as required.(Make Finolex/Polycab/ RR Kable)

SITC of control VSD (Variable speed drive) starter panel consisting of suitable VSD drive for 60 hp pump of make-Schindler/ABB including digital VM, AM, Single Phasing Preventor, Dry run protection, power factor correction capacitor, overload relay with indicator lamps in MS Sheet box enclosure with hinged double doors & locking arrangements complete with grouting on fabricated iron legs and required size of RCC foundation suitable for outdoor mounting incomer MCCB & neccsary electrical protection as per IS standard.

SITC of Junction Box with suitable connectors for connection of armoured cable & flexible cable near to the borewell.

Supply & making of maintenance free Earthing station with the use of 19/21mm dia copper Rod, 3M long with 50kg- grounding material (back fill compound with moisture capture capacity and reuse soil) resistivity - scope includes supply of electrode/ back fill compund / labour charges of bore of 300- 3.5 mtrs depth/making earth chember with 450 mm x 450 mm x CI / FRP cover Installation detail - making 3.5 m depth bore - 100 mm fill with chemical compund paste / put electrode in centre of bore / fill up balance space of bore with chemical compund / balck cotton soil ( if avilable ) paste - carefull for no air gap in paste. Final acceptable resistance value to be achieved-LESS THEN 1 OHM.

Supply installation of hot dip GI perforated cable tray (Size-100X25mm, Thickness-2mm) with all accessories like coupler, GI nut bolts, bend tee, reducer etc.

Shivdip Builders PVT.LTD. (BID ID -3180716)

Nilkanth Tubewell Corporation (BID ID -3180861)