SPECIAL REPAIRS TO IN LIVING ACCOMMODATION BLOCK (BLDG NO P - 164) AT NAVAL BASE KOCHI

Amount

Demolition of Concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) and removal of debries not exceeding 100 m all as specified and as directed.

M & L PCC1:3:6 type C1 using 20mm graded stone aggregate, 75mm thick, as in plinth protection,floor etc as specified and as directed.

Taking down cement or cement lime plaster, any description, on brick or stone walls etc including raking out joints, hacking for key, scrubbing down with water etc complete as specified and as directed.

M&L for rendering 15 mm thick in cement mortar 1:3 with 3% WPC on fair faces of brick work or concrete surfaces of water tank, finished even & smooth, etc complete as specified and as directed.

M&L for rendering 10 mm thick in cement mortar 1:6 on fair faces of brick work or concrete surfaces, finished even & smooth etc complete as specified and as directed .

M&L for rendering 15 mm thick in cement mortar 1:4 on fair faces of brick work or concrete surfaces, finished even & smooth etc complete as specified and as directed .

M&L for rendering 5mm thick in cement mortar 1:3 on concrete surfaces in ceiling, finished even & smooth etc complete as specified and as directed .

Demolition of brick work built in cement mortar or cement lime mortar, including disposal of debries all as specified and as directed.

M&L Brick work built in CM 1:6 with sub class 'B' bricks straight or curved on plan exc 6 M mean radius using old size bricks all as specified and as directed.

M&L for Complete removal of existing treatment by brushing, rubbing down with water including scrapping and preparing of old treated surfaces of external walls and applying 2 coat of Apex Ultima Protek system of Asian paint or equivalent of Berger/Nerolac/Dulux over a coat of antifungal primer duly applied through company authorised applicator or under company supervision using modern tools and techniques all as specified and as directed Note :- contractor shall submit performance Guarantee for period of five years complete all as specified.

Preparation of new plastered surfaces of external wall and applying 2 coat of Apex Ultima Protek system of Asian paint or equivalent of Berger/Nerolac/ Dulux over a coat of antifungal primer duly applied through company authorised applicator or under company supervision using modern tools and techniques all as specified and as directed . Note :- contractor shall submit performance Guarantee for period of five years complete all as specified.

M&L for preparation of new plastered or unplastered surfaces of ceiling and applying three coats of whitewash all as specified and as directed .

M&L for preparation of old decorated plastered or unplastered surfaces of ceiling and applying one coat of whitewash complete all as specified and as directed .

M&L for preparation of old decorated plastered or unplastered surfaces of walls and applying one coat of whitewash complete all as specified and as directed .

M&L for preparation of newely plastered surface of wall and applying 1 mm thick wall care putty as preparatory to distempering and applying two coats of oil emulsion distemper ( Asian paint Royale or equivalent of other make as given in the list of make ) over a coat of alkali resistant primer all as specified and as directed. Note :- Painting shall be done through authorised applicator of paint paint manufacturer.

M&L for complete removal of existing treatment of old surface of wall and applying 1 mm thick wall care putty as preparatory to distempering and applying two coats of oil emulsion distemper (Asian paint Royale or equivalent of other make as given in the list of make ) over a coat of alkali resistant primer all as specified and as directed. Note :- Painting shall be done through authorised applicator of paint paint

M&L for preparation of old wooden surfaces of any description and applying one coat of synthetic enamel paint complete all as specified and as directed . (Make: Asian/ Berger/ Dulex)

M&L for preparation of new steel surfaces of any description and applying two coats of synthetic enamel paint over a coat of redoxide primer complete.(Make: Asian/ Berger/ Dulex)

S&F stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples complete all as specified & directed .

Dismantling wrought iron or mild steel work of any description not otherwise provided for guard bars and handrail etc complete all as specified and as directed.

S&F Framed work such as grills, gratings, etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe Fe 290 Gde E-165 etc complete all as specified and as directed.

S & F PVC connection 15mm bore 45cm long with brass coupling complete,all as specified and as directed.

Taking down chowkats with shutter n.exc 1.5 Sqm each with or with out guard bars (without taking off shutters from the frame) complete,all as specified and as directed .

Taking down chowkats with shutter exc 1.5 Sqm but n.exc 4 Sqm each (without taking off shutters from the frame) complete,all as specified and as directed .

S&F powder coated aluminium sections of various sizes required for frame and shutters of doors, sliding /fixed/hung windows, ventilators and partition with one or more rebates etc.including necessary joining cleats, glazing clips, beading,rubber packing, screws and all other fittings like locking arrangement for shutters etc. all as specified and directed ( Factory prefabricated of Make JINDAL/INDAL/HINDALCO)

S & F sheet glasses,plain 4.80mm thick glazing all with aluminum beading, glazing pin etc exc 0.5 sqm in each pane complete,all as specified and as directed . (Make: Modiguard / Saint Gobian / Swastik)

S & F sheet glasses,opaque / frosted on one side 4mm thick glazing all with aluminum beading, glazing pin etc, or with oil putty in suare n exc .5 sqm in each complete,all as specified and as directed . Make :- Modiguard / Saint Gobian / Swastik

S & F 12mm prelaminated particle board, interior grade,prelaminated oneside with decorative choice lamination & other side balancing white lamination,fixed with screws to aluminium frame work complete,all as specified and as directed . Make: Eco Board Industries/Kitply/Green Ply

S&F solar control film 50 mic reflective type sticked to glass panes as per instructions of manufacturers(Make: Gareware/Saint Gobin/Modiguard)

S&F door closer hydraulically regulated, designation No. 2, universal type, suitable for door shutters of 701 to 850 mm in width and of weight between 36 to 60 kg with Aluminium (Die cast) body complete,all as specified and as directed . (Make: Everite/Universal/Dyana)

S&F powder coated aluminium door shutters,aluminium section weighing 0.55 kg/m including necessary joining cleats,glazing clips, ruber neoprene packing,handles 2 Nos in each door, hinges,anodised aluminum snap beading screws etc.with complete all as specified and directed . Note:- (i) Glazing/panel/wiremesh shall be measured and paid separately. (ii) Item shall be paid as per the weight of Aluminium section however the rate quoted shall be inclusive of the cost of neoprene beading glazing pins, screws, handle etc which shall not be measured for arriving the weight.( Factory prefabricated of Make JINDAL/INDAL/HINDALCO)

S&F powder coated 3 track sliding window shutter with frame, aluminium section weighing 0.55kg/m including necessary joining cleats, glazing clips, rubber packing, aluminium anodized snap beading, screw etc. including two shutter with 4mm thick one side frosted glass glazing and one shutter with stainless wiremesh 0.45mm nominal dia .complete all as specified( Factory prefabricated of Make JINDAL/INDAL/HINDALCO)

S&F powder coated aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips,rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21,100mm long (2 no.) suitable handle (1no.) with complete all as specified and directed . ( Factory prefabricated of Make JINDAL/INDAL/HINDALCO) Note:- (i) Item shall be paid as per the weight of Aluminium section however the rate quoted shall be inclusive of the cost of neoprene beading glazing pins, screws, handle etc which shall not be measured for arriving the weight.

S & F Aluminium anodised barrel tower bolts 200mm long of extruded section all as specified and as directed. ( Make:Crown / Jyothi / Argent )

S & F Aluminium anodised barrel tower bolts 150mm long of extruded section all as specified and as directed. ( Make:Crown / Jyothi / Argent )

S&F in repairs Butt hinges,100mm size medium weight, cold rolled mild steel, all as specified and as directed. ( Make:Crown / Jyothi / Argent )

S & F150mm Aluminium handles, cast type, anodised, all as specified and as directed. ( Make:Crown / Jyothi / Argent )

M/L FRP door frame of size 100 x 60mm with inner core of treated and seasonal rubber wood and outer core of average 2mm thick FRP with gel coat finish weighing an average 4kg/RM with flat iron hold fast 25 x 3mm x 200mm long 6 Nos per each frame all as specified and as directed. (Factory made of Make:Festel Tanks Pvt Ltd / Rogins Fibre Glass /Poly cast Industries Ltd)

M/L FRP door shutters 30mm thick made with unsaturated polyster resin moulded to 3mm FRP laminate for forming hollow rails and styles filled inside with suitably treated and seasonal rubber wood at required places for fixing of fittings, cast monolithically with 5mm thick FRP laminate for panels with gel coat finish with average weight of 8Kg/Sqm(Factory made of Make:Festel Tanks Pvt Ltd / Rogins Fibre Glass /Poly cast Industries Ltd) .

Dismantling floor hearth or wall tiling including cement mortar bedding, removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed.

M&L glazed ceramic coloured tiles (600mm x 300mm) x 7 to 8mm thick in dado/skirting etc set & jointed in neat cement slurry & pointed in coloured cement to match on vertical surfaces including backing coat with cement mortor 1:4,10mm thick ,all as specified and as directed. (Make: Somany/ HR Johnson/ Kajaria)

M&L aluminium angle section 40x40x3.5mm thick on edges of wall tiling ,all as specified and as directed

M&L for coloured non skid ceramic coloured tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floorsset and jointed in neat cement slurry and pointed in white or coloured cement to match including screed bed with cement mortor 1:6,15 mm thick ,complete all as specified and directed. (Make: Somany/ HR Johnson/ Kajaria)

Demolition of stone slab and tiles of any description or thickness on cooking platform, floors, apron etc, laid bedded and pointed any mortar complete all as specified and directed.

M&L for 20mm thick Granite(of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite, including screed bed with cement mortor 1:6, 20 mm thick complete all as specified and directed.

Demolition of reinforced Concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed.

M&L RCC1:2:4 Type B1 (2omm graded stone Agg) as in slab supported on walls,beams and columns deck slabs and in shlves and the like etc complete all as specified and as directed..

Use and waste of form work for soffits of slabs rough finished flat surface of concrete etc complete all as specified and as directed.

S&F TMT bars as in reinforcement 10mm dia and over cut to length, bent to shape required incl binding with and including MS wire not less than 0.9 mm dia or securing with clips etc complete all as specified and as directed.

S&F in repairs oval type wash basin vitreous China coloured of size 550x440mm and including brackets / fixed on platform etc complete all as specified and as directed. (Make: Cera/ Parryware/ Jaguar)

M&L for machine cut kota stone slab flooring 20-25mm thick(single piece for steps treads including nozing) over and including cement screed base with cement mortor 1:6,20 mm thick laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and as directed.

M&L for machine cut kota stone slab flooring 20-25mm thick over and including cement screed base with cement mortor 1:6,20 mm thick, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and as directed.

M&L for kota stone slab 20-25mm thick as in skirting, dado and pillar laid over cement screed including 20mm backing coat of CM 1:6 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and as directed.

M&L 20 mm thick Marble strip laid over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing complete all as spcified as boarder to kota stone flooring complete all as specified and as directed.

S&F in repairs low level flushing cistern of 10 ltrs capacity PVC valveless, syphonic action type white with inlet ball valve float and handle complete all as specified and as directed. (Make: Cera/ Parryware/ Jaguar)

S&F in repairs Cast iron floor trap with grating including jointing to waste pipe in cement joint, dia of outlet 100mm complete all as specified and as directed.

S&F PVC Nahani trap 75 mm(SWR), plain with grating including Jointing with solvent or cement complete all as specified and as directed.

S & F in repairs Pillar tap 15mm bore fancy type, cast copper alloy with capstan heads chromium plated screwed down high pressure with long screws shanks and fly nuts screwed for iron pipes . (Make: Soma /Zolota /Leader )

S & F in repairs curtain rod 20 mm dia, anodised aluminium alloy complete all as specified and as directed.

S & F in repairs bracket for fixing curtain rods, anodised aluminium alloy complete all as specified and as directed.

S & F Tubular towel rail stainless steel, 70cm long with brackets, 'D' type 20mm dia , complete all as specified and as directed

S & F in repairs Soap dish vitreous china coloured appx size 160 x 160x90mm recessed type fixed to plugs with CP brass screws, complete all as specified and as directed. (Make: Cera/ Parryware/ Hindware)

S&F 6mm thick frame plain looking mirror with 6mm plywood backing fitted with powder coated aluminium angle frame incl fixing with nuts and bolts on walls all as specified and as directed .

S & F in repairs Vitreous China Urinal, Half stall type, white (excluding flushing cistern, flush pipe and waste pipe) all as specified and as directed . (Make: Cera/ Parryware/ Hindware )

S&F in repair Vitreous China wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) with Plastic water closet seat, black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specified and as directed. (Make: Cera/ Parryware/Hindware)

S&F Stainless steel pipe 50mm dia 1.5mm thick grade 304 for railing post and fixed in floor with suitable base plate complete all as specified and as directed.

S&F Stainless steel pipe 40mm dia 1.5mm thick grade 304 for railing post and fixed in floor with suitable base plate complete all as specified and as directed..

S&F Stainless steel pipe 25mm dia 1.5mm thick grade 304 for railing post and fixed in floor with suitable base plate complete all as specified and as directed .

M&L for demolition of cement concrete (unreinforced) in any position and filling of any description not otherwise specifically provided for sunken floors including disposal of debries all as specified and as directed.

M&L for rendering 15mm thick in CM 1:3 or concrete surface or brick surface finished fair and even without using extra cement to sunken floor with and including WPC as per manufacturers instructions all as specified and as directed

M&L for two coat of bitumen grade 85/25 applied hot to concrete surface at rate of 1.2 kg per sqm( one coat over the screed and one over APP sheet) all as specified and as directed

M&L APP based polymeric membrance minimum weighing 3.6 Kg/ Sqm & minimum 3 mm thickness reinforced with polyster non woven fabric (wt not less than 150 gms/ sqm) laid on primed surface by forced application ,as in sunken floor complete all as specified and as directed . (Make: BASF/Fosroc/IWL/ STP Ltd)

M & L Cement concrete type B-1, 1:2:4 (20mm graded stone aggregate) 50mm thick in sunken floor of toilet/bathroom finished even and smooth with out extra cement complete all as specified and as directed.

S&F Aluminum deco-grill (mesh size 10 x 5.2 mm) 10 mm thick 104 to windows with necessary U/F/H channel etc complete all as specified and as directed.

S&F PVC ( SWR ) bends 110 mm dia with access door complete all as specified and as directed.

S&F PVC ( SWR ) bends 75 mm dia with access door complete all as specified and as directed.

S&F PVC ( SWR ) vent cowl 110 mm dia complete all as specified and as directed.

S&F PVC ( SWR ) vent cowl 75 mm dia complete all as specified and as directed.

S&F PVC ( SWR ) T junction (single) 110 mm dia with access door complete all as specified and as directed.

S&F PVC ( SWR ) T junction (single) 75 mm dia with access door complete all as specified and as directed.

S&F PVC ( SWR ) branch piece single (single 'Y') 75 mm dia equal or un equal complete all as specified and as directed.

Dismantling CI work of any discription and in any position complete all as specified and as directed.

S&F PVC (SWR) pipes 75 mm dia single socket in any length laid in trenches or in floors etc complete , all as specified and as directed .

S&F PVC (SWR) pipes 110 mm dia single socket in any length ,fixed to walls etc complete , all as specified and as directed .

S&F Bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required; hooks (stay), heavy, for large gates; hook and pintle hinges; large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe 290 Gde E-165 etc complete,all as specified and as directed .

S&F CI spun pipe 100mm bore laid in trenches or in floorsetc complete, all as specified and as directed . (Make: NECO/Kesoram/Kapilansh)

M&L for PCC type E2 1:5:10(40mm stone aggregate) in sunken floor of toilet/bathroom finished fair and even complete, all as specified and as directed.

Supply only integral water proofing compound all as specified and as directed. (Make: Pidilite/ BASF/ IWL)

M & L for cutting out cracks to 'V' section in existing roofs or terracing, cleaning out, and filling solidly with a hot mixture of bitumen and clean dry sand 1:1 (by weight) complete, all as specified and as directed.

Dismantling of existing roof treatment consisting of screed bed , tarfeits etc and removal of dismantled materials complete all site all as specified and directed

M&L preparing the surface and applying oil bound bitumen primer @ 0.25 kg/Sqm, and blown grade bitumen 85/25, 1.20 Kg/Sqm providing and laying 4 mm thick APP modified water proofing membrane, weighing not less than 4.00 kg/sqm reinforced with non woven polyster mat weighing not less than 160 gm/sqm having softening point not less than 140 degree centigrade longitudinal tensile strength not less than 650 N/5 cm tearing strength of 180N min by torch application including miniumum 10 cm side overlap and 15 cm end lap applying a coat of blown grade hot bitumen 85/25 over the membrane @ 1.20 Kg/Sqm.Applying solar reflective aluminium paint @ 0.1Kg/sqm complete all site all as specified and directed (Make: BASF/Fosroc/IWL/ STP Ltd).

Treating crumple joints with necessary treatment etc complete by racking out joints, clearing of loose particles, providing polysterene film / filling to achieve a uniform depth of 15 mm and filling up the joints with polysulphyde sealant throughout the width of joints incl fixing aluminium sheets of 1mm thickness and 150mm width to with brass screws / washers all as speicified.(Make: BASF/Fosroc/IWL/ STP Ltd)

M&L provide 50 mm dia UPVC pipe of pressure rate 10kgf/cm2 as water spout in sunken floor complete all as specified and directed.(Make:Prince/Supreme/Finolex).

Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting exc 10 cm bt n exe 20cm girth.

Material and labour for point wiring for one light/fan point with 1.5 sqmm PVC insulated (FRLSH) unsheathed copper conductor multistranded 1100 volts grade controlled by one way switch including 1.5 sqmm PVC (FRLSH) insulated unsheathed copper cable multistrand conductor 1100 volts grade for continuity conductor including connected to common earth dolly drawn through and including rigid PVC Conduit medium grade ISI marked concealed of suitable size with all accessories and sunken box of 1.6 mm thick and 60 mm depth pressed steel box factory made for including hylam sheet ISI marked ,3 mm thickmounting of switch, socket and fan regulator with covers including chase cutting and making good to the disturbed surface and matching to the existing finishes specifications complete all as specified and as directed by the Engr-in-Charge.

All as per item No 88 here in before but for one 5 pin 5 Amp socket outlet point on independent board complete all as specified and directed.

All as per item No 88 here in before but for one 5 pin 5 Amp socket outlet point on the same board complete all as specified and directed.

All as per item No 88 here in before but using with 2.5 Sqmm copper conductor cables multistranded (FRLSH) PVC insulated , unsheated cable and including 2.5 Sqmm copper conductor cable multistranded(FRLSH) PVC insulated and unsheated cable as earth continity wire and connecting to common earth dolly for one 6 pin 15 Amp socket outlet point on independent board complete all as specified and directed.

Supply and fix in replacement ceiling rose surface bakelite 65 x 50mm 3 terminals 240 Volt 50 Hz Complete all as specified and directed.

S&F switch piano flush type 5A one way all as specified and directed

S&F switch socket combination 5 Pin 5 Amp flush type all as specified and directed .

S&F switch socket combination 6 Pin 5 amp /16 Amp all as specified and directed.

Supply and fix LED Tubelight fitting 1 x10 w ,extruded aluminium batten available in 2ft suitable for surface including all connection all as specified and as directed.Cat part no BN 021 LED10S-6500 PSU GR S1 of Philips,LDL-10-WW of Crompton ,112408 of Bajaj .

Supply and fix LED Tubelight fitting 1 x20 w ,high efficiency and robust industrial batten suitable for surface,wall including all connection all as specified and as directed.Cat part no BN308C LED20S-6500 L60 PSU WH of Philips,CIS-305-40-57-SL-DP-NWH Of Crompton,LPRD01X020XC OF Jaguar .

Taking down exhaust fan ,dismantling blades and removing fan and blades to store for painting of exhaust fans with synthetic enamel paint one coat by spray painting (white ) with glossy finish including preparation of surfaces by removing old paint,filling cavities with filler and writing fan No. / MES No. etc with black paint etc. and rehanging in original position and connecting up including provision of cable from ceiling rose or connector to fan complete all as specified and as directed.

Taking down ceiling fan ,dismantling blades and removing fan and blades to store for painting of ceiling fans with synthetic enamel paint one coat by spray painting (white ) with glossy finish including preparation of surfaces by removing old paint,filling cavities with filler and writing fan No. / MES No. etc with black paint etc. and rehanging in original position and connecting up including provision of cable from ceiling rose or connector to fan complete all as specified and as directed.

S&F Stepped type electonic fan regulator flush type 100 watt , 240 volt , 50 HZ all as specified and directed . Make :-cat part no -5734 16 of legrand ,SLV0300301/02 of Polycab,OR21W01 of L&T

Material and labour for submain wiring with 2 runs 4 Sqmm single core,PVC insulated, unsheathed, multistranded copper conductor FRLSH cable 1100 volts medium grade not less then 25 mm dia drawn through PVC concealed conduit with all accessories , one run of 4 Sqmm cable single core PVC insulated, unsheathed, ,1100 Volts grade multistranded copper conductor FRLSH cable as earth continuity conductor and connecting including cutting the chases etc and making good the disturbed surface to match with the existing complete including taking down old existing submain wiring all as specified and directed. Note:-Two runs of 4 Sqmm size PVC FRLSH copper conductor , One run of 4 Sqmm size PVC FRLSH copper Conductor and one run of PVC conduit shall be measured as one unit length.

Material and labour for submain wiring with 2 runs 6 Sqmm single core,PVC insulated, unsheathed, multistranded copper conductor FRLSH cable 1100 volts medium grade not less then 25 mm dia drawn through PVC concealed conduit with all accessories , one run of 6 Sqmm cable single core PVC insulated, unsheathed, ,1100 Volts grade multistranded copper conductor FRLSH cable as earth continuity conductor and connecting including cutting the chases etc and making good the disturbed surface to match with the existing complete including taking down old existing submain wiring all as specified and directed. Note:-Two runs of 6 Sqmm size PVC FRLSH copper conductor , One run of 6 Sqmm size PVC FRLSH copper Conductor and one run of PVC conduit shall be measured as one unit length.

S & F in replacement sheet metal enclosure TPN for DB's when MCB's to be used 12 way with 200 amps,415 Volt ,50 Hz , bus bar and double door complete ,including taking down old TPN DB all as specified and directed.

S & F in replacement sheet metal enclosure TPN DB's when MCB's to be used 8 way with 200 amps,415 Volt ,50 Hz , bus bar and double door complete ,including taking down old TPN DB all as specified and directed.

Supply and fixing in repair Tripple pole MCB 63 Amp,B curve 50 Hz, 415 V with rupturing capacity 10 KA all as specified and directed . Make :- Cat part -AU10S30633B of L&T,CSMBS3B63 of C&S,811198 of indoasian

S & F in replacement MCB SP 6 to 32 Amps 240 Volts,10 KA, 'B' curve with all incoming/outgoing connections with proper size of lugs complete all as specified and directed. Cat part No - AU10S10063B of L&T,811008 to 811015 of indoasian ,1SYS271012R0065 to 1SYS271012R0325 of ABB

Materials and labour, earthing complete with galvanised iron earth plate electrode 600 mm x 600 mm x 6 mm thick, burried directly and preferably vertically in ground, earth pit not less than 2.25 m below ground level with top edge of the plate not less than 1.5 m below ground level connetced with galvanised wire 4 mm dia by means of nuts, bolts, check nuts and washers made of galvanised iron or steel earthing lead to be protected by galvanised iron pipe 15 mm bore (medium grade) and other end connected to earthing test point or lightening arrestor or main controlling switch all as shown in electrical plate No 3 of SSR Part-I 2009 including providing funnel with 20mm bore galvanised iron pipe (light grade), wire mesh, charcoal or coke and common salt in alternate layer of 15cm (compacted thickness) all round the earth electrode, concrete earth pit in PCC (1:3:6) type C-1 (with 20mm graded stone aggregate), 50mm thick precast RCC (1:2:4) type B-1 using 20mm graded stone aggregate cover slab (reinforced with 8mm dia TMT bar @ 15 cm C/C bothways and suitable handle made of 10mm dia), with 40x40x6mm MS angle iron frame including necessary earth work and testing on completion, complete all as specified and as directed.

S & F VTPN MCCB DB 8 way suitable for up to 250 amp MCCB with IP- 43 ,double door with and including 200 amp MCCB ,25 KA 4 pole, 415 volts ,50 Hz, adjustable thermal range,all connection with using suitable thimble ,including taking down old VTPN DB all as specified and directed . Make:- Cat part no -811895 and 830335 of indoasian, 5077 56 and 4202 18 of legrand ,CSDBMCCB250PDD04S and CS3B4c* of C&S

Material and labour for submain wiring with 4 runs 6 Sqmm single core,PVC insulated, unsheathed, multistranded copper conductor FRLSH cable 1100 volts medium grade not less then 25 mm dia drawn through PVC concealed conduit with all accessories , two run of 6 Sqmm cable single core PVC insulated, unsheathed, ,1100 Volts grade multistranded copper conductor FRLSH cable as earth continuity conductor and connecting including cutting the chases etc and making good the disturbed surface to match with the existing complete including taking down old existing submain wiring all as specified and directed. Note:-Four runs of 6 Sqmm size PVC FRLSH copper conductor , One run of 6 Sqmm size PVC FRLSH copper Conductor and two run of PVC conduit shall be measured as one unit length.

Material and labour for submain wiring with 4 runs 10 Sqmm single core,PVC insulated, unsheathed, multistranded copper conductor FRLSH cable 1100 volts medium grade not less then 25 mm dia drawn through PVC concealed conduit with all accessories , two run of 10 Sqmm cable single core PVC insulated, unsheathed, ,1100 Volts grade multistranded copper conductor FRLSH cable as earth continuity conductor and connecting including cutting the chases etc and making good the disturbed surface to match with the existing complete all as specified and directed. Note:-Four runs of 10 Sqmm size PVC FRLSH copper conductor , One run of 10 Sqmm size PVC FRLSH copper Conductor and two run of PVC conduit shall be measured as one unit length.

Taking down carefully existing aluminium/copper point wiring on batten or any other description including earth wire etc (for light/ fan/ socket / power ) complete and making good the disturbed surfaces of walls, Floors, ceilings etc to match with existing all as specified and directed.

Supply and fix Single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB 20Amp inculding taking down old SPN enclosure all as specified and as dirrected.

S & F LED flood light Luminaire of 40/35 watts, aluminium die cast housing and frame with powder coating toghened glass with silicon gaskets for IP66 protection complete assembly with LED driver and accessories including all connection all as specified and as directed. Cat part no LF19-471-060-57-XX Of Wipro ,SLE FL 40W IP65 RFLOOD Surya BVP120 LED 35 CW FG S1 PSU GR of Philips .

M&L for supply and fixing CPVC pipes SDR-13.5 & plain CPVC SDR 11 fittings including complete whichever be required on wall/ceiling or laying in floor/concealed of size 20 mm outer dia of CPVC pipe complete all as specified and directed including taking down old one. Make: Supreme/Eurotech/Astral/SFMC

M&L for supply and fixing CPVC pipes SDR-13.5 & plain CPVC SDR 11 fittings including complete whichever be required on wall/ceiling or laying in floor/concealed of size 25 mm outer dia of CPVC pipe complete all as specified and directed including taking down old existing pipe all as specified and as directed . Make: Supreme/Eurotech/Astral/SFMC

M&L for supply and fixing CPVC pipes SDR-13.5 & plain CPVC SDR 11 fittings including complete whichever be required on wall/ceiling or laying in floor/concealed of size 40 mm outer dia of CPVC pipe complete all as specified and directed including taking down old existing pipe all as specified and as directed . . Make: Supreme/Eurotech/Astral/SFMC

M&L for supply and fixing of bib cock short body cast fancy type copper alloy chromium plated with flange and aerator or crutch/butterfly, handle, screwed down, screwed of size 15 mm dia and fixing with CPVC pipe outer dia 20 mm complete all as specified and directed at site including taking down old existing bib cock all as specified and as directed . Make: Cera/Prayag/Hindware/Jaquar

M&L for supply and fixing of angle valve/stop cock with sliding flange fancy type chromium plated of 15 mm dia and fixing with CPVC pipe outer dia 20 mm complete all as specified and directed at site including taking down old existing stop cock all as specified and as directed Make: Cera/Prayag/Hindware/Jaquar

M&L for supply and fixing of cocealed type 15 mm dia fancy type CP cast copper alloy screwed down high pressure screwed both ends complete all as specified and directed at site including taking down old existing cock all as specified and as directed. Make: Cera/Prayag/Hindware/Jaquar

M&L for supply and fixing of bib cock long body cast fancy type copper alloy chromium plated with flange and aerator or crutch/butterfly, handle, screwed down, screwed of size 15 mm dia and fixing with CPVC pipe outer dia 20 mm complete all as specified and directed at site including taking down old existing bib cock all as specified and as directed . Make: Cera/Prayag/Hindware/Jaquar

S&F in repairs health faucet ABS body with wall hook & 1Mtr SS braided flexible tube complete. (Make-CERA Cat No- Cera F 8030102 ) all as specified and directed .

S&F of shower rose with shower arm CP swivel type of bore face dia 125 mm complete all as specified and directed at site including taking down old shower rose all as specified and as dirrected. Make Cera/Prayag/Hindware/Hindware

S&F of low density polythene pipe 16 mm dia 450 mm long for cold water (PVC connections) complete with brass union on both sides suitable for fixing with angle valve of size 15 mm dia complete all as specified and directed at site including taking down old shower rose all as specified and as dirrected.

S&F brass valves of size 25 mm dia high pressure with polythene ball of size 6" dia and fly nut complete all as specified and directed at site including taking down old valve all as specified and as dirrected.

S&F ball valve of size 40 mm dia for CPVC pipe 40 mm (OD) complete all as specified and directed at site including taking down old valve all as specified and as dirrected. Make: Supreme/Eurotech/Astral/SFMC

Classic Builders

SHAIJAL T M