Contruction of Compound wall at Kandala

Amount

Providing and getting Sanction from Local Authority of Government for the construction (If required) including satuatory documents like layout, key plan and other relavant certificates. All as per Rules and Specification.

Clearing the Site with dismantling/removing existing fencing and disposing the debris upto a lead of 100 mtr as directed by EIC

Earth excavation for Foundation trenches in all kinds of soil including dressing of sides, compaction of base, disposing the surplus excavated materials within a distance of 100m and lift 1.50m complete as per specifications. (Disposed soil to be levelled by breaking clods if any and neatly dressed).

Earth filling with earth brough from outside upto plinth and in flooring, watering, consolidating and levelling to the required depth as per direction.

Providing and laying PCC(1:3:6) in foundation and plinth using 20mm nominal size graded hard granite stone aggregate including compaction, finishing top surface to level, inclusive of shuttering rate etc; complete all as per specifications.

Providing and constructing RR Masonry in foundation and plinth using hard granite in 1:6 cement mortar with bond stones at every 0.50 sqm of wall surface in cement mortar in mixes stipulated below without pinning on face, but including raking out joints and pointing flush in same mortar including curing, etc; complete as per specifications.

Providing and laying in position RCC (1:2:4) thick for flooring using 20mm nominal size aggregate obtained from approved quarry including mechanical mixing, vibrating, compaction, finishing, curing, etc in in water level as per site consition; complete all as per specifications. The rate shall include the cost of shuttering.

Providing and constructing Block masonry with solid blocks with size of 40x20x15 cm in CM 1:4 for side walls upto 1.8M height as per the site condition and technical specifications directed by EIC

Plastering (1:6) 12mm thick with cement mortar using well graded M-sand specified below, curing, etc; complete all as per specifications upto 3.5 M above G.L.

White washing with lime (fat lime class-C) three or more coats to give an even shade to walls and ceilings including charges for scaffolding, cleaning the surface, cost of lime powder and gum, etc; complete all as per specifications.

Steel reinforcement using TMT bars for all R.C.C items including decoiling, cutting, hooking, bending, cranking, fabricating to required shape, placing in position and tying the system with soft drawn annealed binding wire of diameter not less than 1.00mm with 2 strands etc complete

Supply and fixing of MS Flat bar having size 16mm × 8mm including two coats of Synthetic Enamel paint over one coat of primer at required height as per direction of Engineer-in-charge including cost of materials, conveyance, labour charges and hire charges for scaffolding etc. complete

M BASHEER KANNU

Bijukumar