REPAIR REPLACEMENT TO JOINERY SANITARY FITTINGS WALL FLOORING SWR PIPES REPAIR TO SUNKEN FLOORS CEILING ROOF TREATEMENT SHAFTS AND OTHER MISC REPAIRS MAINT WORKS TO Md OTM ACCN IN SECTOR I TO IV AT SMA RAMESHWARAM

Amount

Demolition of cement concrete of any description and in any position not otherwise specifically provided for

Removal of existing detoriated decayed tarfelt or any other treatment, loose surface & removing the debris to a distance n.exc 50m depositing where directed complete all as specified

M&L for cutting out cracks to V-section in existing roofs or terracing, cleaning out, wetting, grouting with cement and sand slurry 1:3 , all as specified and as directed.

M&L for water proofing treatment by applying oil based bituminous primer @ 0.25 kg/Sqm, applying a coat of blown grade hot bitumen 85/25 @ 1.2 Kg/ Sqm and laying 4 mm thick APP modified water proofing membrane weighing not less than 4 Kg / Sqm, reinforced with non woven polyster matt weighing not less than 160 gm /Sqm having softening point not less than 140 degree centigrade longitudinal tensile strength not less than 650 N/Sq cm, tearing strength of 180 N incl minimum 10 cm side overlap & 15 cm end overlap, and application of torch at overlap portion and finishing surface with solar reflective bituminious aluminium paint @ 100gm/Sqm,complete all as specified and as directed

Dismantling single layer Mangalore pattern or similar tiles in roofing in small patches all as directed.

M&L for roof tiles, Mangalore pattern, interlocking at side joints, laid dry, all as specified and as directed.

M&L for ridge or hip tiles to suit Mangalore pattern of roofing tiles, bedded and jointed in lime mortar 1:3 or cement mortar 1:6, all as specified and as directed.

M&L for rendering 10mm thick in CM 1:3 on fair faces of brick work or concrete surfaces finished even & smooth without using extra cement & using liquid water proofing compound on roof top, all as specified and as directed.

M&L for plain cement concrete (1:2:4) type B0, (12.5mm graded stone agg) as in filling under undulation of roof top/chajjas complete all as specified and as directed

Demolition of cement concrete(unreinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level) all as directed.

M&L for Hydraulically pressed burnt clay tile plain of size 200x200x19/20mm machine made laid over & including cement mortar screed 15mm thick in CM 1:6 mixed with water proofing compound and jointed pointed in CM 1:3 mixed with 5% crude oil by weight of cement , all as specified and as directed. (NOTE - WPC shall be measured and paid seperately)

M&L for 40mm thick cement concrete type B-1, 1:2:4 (20mm graded aggregate as in flooring and making surface even and smooth without using extra cement, all as specified and as directed.

M&L for providing precast cement concrete, type B0, 1:2:4 (12.5mm graded aggregate) set in CM 1:4 as in louvers and jallies, 40mm thick (measured solid), including all mouldings & frame , all as specified and as directed.

M& L for mild steel round bars 6mm dia, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, all as specified and as directed.

M&L rendering 15mm thick cement plaster in CM 1:3 on sunken floor RCC slab including sides to full extent of sunken portion in upper floor with WPC as per manufacturers instructions and finished even & smooth without using extra cement, applying a uniform coat of blown grade bitumen 85/25 @ 1.2 kg/Sqm over a coat of primer @ 0.71 kg/Sqm over plastered surfaces and laying 3mm thick APP membrane wt not less than 3.6 kg/Sqm with torch application & apply a uniform coat of blown grade bitumen 85/25 @ 1.2 kg/Sqm over it complete all as specified and as directed.

M&L Cement concrete, 1:5:10, type E2, using 40mm graded stone aggregate as in filling under sunken floors , all as specified and as directed.

M&L 40 mm thick PCC 1:2:4, type B1, using 20 mm graded stone aggregate as padding concrete in Sunken floor finished even and smooth without using extra cement , all as specified and as directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding, removing rubbish off the premises

M&L for rectified joint less non - skid ceramic coloured designer tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set & jointed in neat cement slurry over 15mm thick screed bed in CM 1:6 and pointed in white or coloured epoxy joint filler, 3mm wide to match, all as specified and as directed.

M&L for Non-skid ceramic coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding .11 sqm, in floors etc. set and jointed in neat cement slurry over 15mm thick screed bed in CM 1:6 and pointed in white/coloured cement to match the shade, all as specified and as directed.

M & L for 300 x 200 x 6 to7 mm thick glazed coloured ceramic tiles on vertical surface of wall set and jointed in neat cement slurry over 10 mm thick screed bed in CM 1:3 and pointed in white/coloured cement to match the shade, all as specified and as directed.

M&L for machine cut kota stone slab flooring 20mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror/beeswax polishing complete including screed bed or bedding layer of mortar 15 mm thick for laying floor finishes in CM 1:4, all as specified and as directed.

M&L for machine cut kota stone 20mm thick as in riser of steps in single piece, skirting, dado and pillar including 10mm thick in CM 1:3 on fair faces of brick work or concrete surfaces to receive wall tiles, all as specified and as directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for

S & F collapsible steel gates, top hung, consisting of channel pickets, pivoted flat bars, top and bottom runners, brass handles etc., as specified, erected in position and securing runners with holdfasts and brackets, complete, all as specified and as directed.

Taking down unserviceable rolling shutter of any type of area exceeding 5 sqm but not exceeding 10 sqm including hood cover, servicing components such as shaft, Spring, ball bearing, lathe, locking plate, guide channel, etc. ensuring smooth functioning and refixing the shutter in the same opening after servicing the components including greasing to all components complete , all as specified and as directed.

Taking down cement or cement lime plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc. all as directed.

M & L for rendering 10mm thick in CM 1:6 finished even & smooth without using extra cement , all as specified and as directed.

M & L for rendering 5mm thick in CM 1:3 on fair faces of brick work or concrete surfaces finished even & smooth without using extra cement., all as specified and as directed.

M & L for rendering 8mm thick in CM 1:4 using liquid WPC over 12mm thick rendering in CM 1:6 on fair faces of brick work or concrete surfaces finished even & fair without using extra cement at any floor complete , all as specified and as directed. Note: Water proofing compound shall be paid separately.

Supply only liquid water proofing compound all as specified and as directed

M & L for preparing newly plastered surfaces of ceiling & applying three coats of white wash on ceiling , all as specified and as directed.

M & L for preparing newly plastered surfaces of wall & applying two coats of acrylic distemper over a coat of priming coat , all as specified and as directed.

M & L for applying a coat of acrylic primer & two coats of antifungal exterior emulsion paint complete as specified and directed upto any height, all as specified and as directed.

Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fittings and accessories) all as directed.

S & F 110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls, all as specified and as directed.

S & F 75mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls, all as specified and as directed.

S & F 110mm bore PVC (SWR) junction single, (Single T) equal or unequal, all as specified and as directed.

S & F 75mm bore PVC (SWR) junction single, (Single T) equal or unequal, all as specified and as directed.

S & F 110mm bore PVC (SWR) branch piece, single (single Y) equal or unequal, all as specified and as directed.

S & F 75mm bore PVC (SWR) branch piece, single (single Y) equal or unequal, all as specified and as directed.

S & F 110mm bore PVC (SWR) bends any radius, all as specified and as directed.

S & F 75mm bore PVC (SWR) bends any radius, all as specified and as directed.

S & F bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required & hold fasts confirming to Fe-290 Grade-E-165, all as specified and as directed.

S & F 110mm bore PVC (SWR) vent cowl, all as specified and as directed.

S & F 75mm bore PVC (SWR) vent cowl, all as specified and as directed.

S & F in repair 75mm PVC (SWR) floor trap, with CP grating including jointing to waste pipe fixed in cement concrete type B-1(1:2:4), all as specified and as directed.

S & F in repair but 100mm PVC (SWR) nahani trap, with CP grating including jointing to waste pipe fixed in cement concrete type B-1(1:2:4), all as specified and as directed.

S & F in repairs vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm or nearest available size as approved, white, with integral foot rests (excluding flushing cistern and flush pipe) including provision of cement concrete bedding, all as specified and as directed.

S & F in repairs Vitreous China wash down water closet pan (pedestal pattern), white including 'P' trap 100mm dia(excluding fixing bolts, flushing cistern and flush pipe) , all as specified and as directed.

S & F in repair vitreous China wash basin, white, flat back, size 550x400mm or nearest available size as approved including taps, waste coupling, chain and plug and including brackets/ fixing with bolts etc. as per manufactures instructions, all as specified and as directed.

S&F in repairs 32mm bore waste coupling of PTMT (half or full threaded) (Minimum weight 5gms/40mm-60 gms), all as specified and as directed.

S & F in repairs plastic water closet seat, black or white, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device, all as specified and as directed.

S & F in repairs 10 litres capacity PVC valve less, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets & flush pipe, all as specified and as directed.

S&F Stainless steel Kitchen Plate Rack in repairs of size 600 mm x 600 mm x 250 mm of 0.5mm thick fixed with plugs screws, washers and waster, including necessary Chipping/drilling holes to fix on wall suitable size in wall as per IS specification complete all as per specified and directed.

S&F in repairs sinks made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes; including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm, all as specified and as directed.

S & F in repair 40mm bore unplasticised PVC pipes of pressure rating 10 kg/cm2 fixed complete to walls as in wash hand basin & sink drain pipes, all as specified and as directed.

S & F in repairs 15mm bore dia fancy type pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed, all as specified and as directed.

S & F in repairs PVC connections 15mm size with PTMT nuts of length 450mm, all as specified and as directed.

S&F in repairs 32mm bore bottle trap of PTMT having minimum water seal of 25mm (minimum weight 32mm-260 gms/40mm-270 gms), all as specified and as directed.

Dismantling of plain steel sheeting, any gauge, thickness of any description as in cladding / construction joints , all as directed .

Cleaning of expansion joints and filling the joints with poly sulphate sealant including primer and backup rod (20-25mm wide) as per manufacturer's instructions ,all as specified and as directed.

S & F Plain, aluminium sheeting, 0.56mm thick, Alloy 31000 H4 in ridges, hips, valley gutter, drip and straight flashing/ cladding in construction joints(length and girth as fixed) including all necessary fittings, all as specified and as directed.

Taking down chowkhat with shutter (without taking off shutters from the frames) not exc 1.5 sqm each all as directed.

Taking down chowkhat with shutter (without taking off shutters from the frames) exc 1.5 sqm each all as directed.

S & F 2nd class hard wood, plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed , all as specified and as directed.

S & F second class hard wood 35mm thick plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers: supplied and fitted to chowkats, all as specified and as directed. Note : Necessary preservation to timber shall be carried out all as specified and the rate quoted is inclusive of this preservation

S & F second class hard wood 30mm thick glazed and skeleton shutters, open rebated and prepared to receive glass,gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats but divided into squares, with plain, chamfered or rounded, mitred and rebated sash bars, any numbers, all as specified and as directed .Note : Necessary preservation to timber shall be carried out all as specified and the rate quoted is inclusive of this preservation

S&F pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete as specified. (Size of the frame is 105x60mm), all as specified and as directed.

S&F pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete as specified. (Size of the frame is 125x60mm), all as specified and as directed.

S & F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, supplying & fixing in opening as per specification & drawing , all as specified and as directed.

S & F Anodised aluminium frame for doors windows with one or more rebates including joining cleat for fixing & locking arrangement for window shutter etc. , all as specified and as directed.

S & F standard aluminium deco grills including making arrangement for opening window.(wt not less than 3 kg per Sqm) grill shall be fixed with suitable clip beading /clamps, all as specified and as directed.

S & F Anodised aluminium casement window / ventilator shutter, side hung type/sliding type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays, all as specified and as directed. 150mm long (1 No.). hinges type B-21100mm long (2 Nos.) suitable handle (1No.) , all as specified and as directed.

S & F in repairs MS framed work such as window grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165, all as specified and as directed.

S & F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specification & drawing.

S & F Factory made solid wire gauzed PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; wire gauzed in panel will be of wire gauze in lieu of pvc sheet panel to be fitted to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specification & drawing. The wire gauze shall be wrapped on an additional square 8mm M.S. Solid tube and this tube shall be welded to M.S. tubes. The wire gauge shall be stretched to tighten firmly, all as specified and as directed. NOTE : wire gauze will be measured and paid seperately.

S & F Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples, all as specified and as directed.

S & F Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples but in repairs, all as specified and as directed.

S & F 4mm thick sheet/ float glass, ordinary quality and glazing fixed in aluminium window shutters area of each pane n exc .5 sq. m in each pane , all as specified and as directed.

S & F 4mm thick sheet/ float glass, ordinary quality and glazing fixed in repairs wooden window shutters area of each pane n exc .5 sq. m in each pane in repairs, all as specified and as directed.

S & F 4mm thick figured sheet/ float glass, ordinary quality and glazing fixed in aluminium window shutters area of each pane n exc .5 sq. m in each pane , all as specified and as directed.

M & L for preparing the surfaces & treating ends of posts, backs of chowkats, etc. with tar or coal tar black paint, area tarred exc 0.1 sq. m but n exc 0.5 sq. m each, all as specified and as directed.

M&L treating small articles such as stop, covers, gully gratings, holdfasts, ends of posts, backs of chowkats, etc., area n exc 0.1 sq. m each, all as specified and as directed.

M&L providing cement concrete type B-1 (1:2:4) using 20mm graded aggregate as in hold fast bed block, filling in pressed steel frame, window cills, all as specified and as directed.

Taking down shutters of any description exc 1 sq. m and n exc 2 sq. m each all as directed.

Dismantling boarding, any description, fixed in any position with nails/ screws all as directed.

S & F anodised aluminium cupboard shutters, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, 01 handle in each shutter, hinges/ rollers, anodised aluminum snap beading screws etc, all as specified and as directed.

S&F medium density fibre board, exterior grade, fixed to aluminium frame with necessary fittings , all as specified and as directed.

S & F 17.5mm thick Solid plain PVC Sheet suitably fixed as in shelves & partitions in cupboards with stainless steel screws & glue , all as specified and as directed.

S&F in repairs continuous hinges (Piano) hinges,30mm brass, bright finish or electro galvanised , all as specified and as directed.

S & F in repair 100mm aluminium anodised, barrel tower bolts of extruded section and fixed, all as specified and as directed.

S & F 150mm aluminium anodised, barrel tower bolts of extruded section and fixed, all as specified and as directed.

S & F 150mm aluminium anodised, barrel tower bolts of extruded section and fixed, but in repairs, all as specified and as directed.

S & F 200mm aluminium anodised, barrel tower bolts of extruded section and fixed, all as specified and as directed.

S & F 200mm aluminium anodised, barrel tower bolts of extruded section and fixed, but in repairs, all as specified and as directed.

S & F 300mm size aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed, all as specified and as directed.

S & F 300mm size aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed but in repairs, all as specified and as directed.

S & F in repair 200mm size PVC sliding door bolt with hasp, staple (bolt type) and fixing clips of PVC and fixing bolts suitable for PVC door shutters , all as specified and as directed.

S & F in repair 125mm size PVC door handle suitable for PVC door shutters, all as specified and as directed.

S & F 100mm butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-21, all as specified and as directed.

S & F 100mm butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-21 but in repairs, all as specified and as directed.

S & F in repairs 75mm size butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised, type C-21, all as specified and as directed.

S & F 200mm, mild steel ordinary rat tail rod pattern springs including roller and roller plate , all as specified and as directed.

S & F 200mm, mild steel ordinary rat tail rod pattern springs including roller and roller plate but in repairs, all as specified and as directed.

S & F 150mm aluminium handles, cast type, anodised, all as specified and as directed.

S & F 150mm aluminium handles, cast type, anodised but in repairs, all as specified and as directed.

S & F in repair aluminium hat and coat hooks, solid body, 175mm to 250 mm, all as specified and as directed.

S & F 2 lever mild steel mortise lock, vertical type, size 65 mm size, all as specified and as directed.

S & F 2 lever mild steel mortise lock, vertical type, size 65 mm size, but in repairs, all as specified and as directed.

S & F in repairs aluminium plate type-II gate and shutter, hooks and eyes 150mm , all as specified and as directed.

S & F 2nd class hard wood small fittings such as brackets of any type, latch and hinge blocks, shaped door and window stops and the like, including all necessary' labours; articles n exc 200 cu. cm each, all as specified and as directed.

S & F 2nd class hard wood small fittings such as brackets of any type, latch and hinge blocks, shaped door and window stops and the like, including all necessary' labours; articles n exc 200 cu. cm each but in repairs, all as specified and as directed.

M & L for welding in repairs n. exc 2.5cm in length to metal articles not exc 6mm thick, all as specified and as directed.

M & L for welding in repairs exc 2.5cm but n exc 5cm in length to metal articles not exc 6mm thick, all as specified and as directed.

M & L for preparation of new or previously untreated wood or wood based surfaces of any description, not otherwise descri-bed, over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer , all as specified and as directed.

S & F in repair curtain rods fancy type powder coated conduit not less than 18mm dia including Rings and Finial , all as specified and as directed.

S & F in repair fancy type powder coated bracket suitable for curtain rods fancy type powder coated conduit not less than 18mm dia including Rings and finial , all as specified and as directed.

S & F in repair tubular towel rail, aluminium anodised, 20mm dia, D type, 60cm long between flanges, all as specified and as directed.

Demolition of brick work built in cement mortar all as directed.

M & L Pre-cast cement concrete block masonry, 1:3:6, type C1 using 20mm graded stone aggregate solid blocks, exc. 10 cm in width and setting in mortar 1:6, all as specified and as directed.

M & L for preparation of new or previously untreated steel surfaces of any description, over 10cm in width or girth, not otherwise described applying with two coats of synthetic enamel paint over a coat of red oxide or zinc chrome primer , all as specified and as directed.

M & L weeding out plants / bushes including roots from the roof & walls of building to any height up to 12 th storey and applying weedicide, (Imazethapyr 10% SI or equivalent) around the roots & bushes removed and making good the disturbed surface if required, , all as specified and as directed.

S & F 20mm thick 1st class hardwood boarding as in floor and skirting planed one side and edges tongued and grooved or rebated fixed with screws and approved adhesives, prepared the exposed surface including polishing & apply two coats of polyurethane lacquer , all as specified and as directed.

M & L rendering 10mm thick with polymer modified mortar using CM 1:3 mixed with Dr Fixit Pedicrete URP/ or BASF by 10% of weight of cement on fair faces of concrete surfaces finished even & smooth with using extra cement complete all as specified and as directed. Note: Polymer Modified compound to be measured separately.

Supply only liquid Polymer Modifying Compound

Chip and remove all damaged and de bonded concrete and plaster from the RCC column, beam, flights, landing, railing and slabs by manually or mechanically so as to expose the corroded reinforcement bars including the rent of tools, scaffolding complete at any height and labour charges for dumping the debris within a radius of 100 meters,all as directed

Supply and application of rust remover/converter (Rebaklense RR of M/s Fosrock Chemicals India Ltd) or Amandur, (Manufactured by GK Technocom) over the corroded reinforcement bar where ever micro concreting is required and cleaning the same after application including the cost of all materials, rent of tools, scaffolding cost of brush etc , all as specified and as directed.

Supply & application of Nitozinc Primer (Manufactured by M/s Fosrock Chemicals India Ltd) over the exposed steel reinforcements after removing the rust scales from the exposed reinforcement rods in one square meter area including the cost of all materials rent of tools, scaffolding, cost of paint brush complete

Supply and application of Nitobond EP (Manufactured by M/s Fosrock Chemicals India Ltd) epoxy bonding agent over the old concrete surface including the cost of all materials, rent of tools, scaffolding and cost of painting brushes etc complete, all as specified and as directed.

Providing additional reinforcement bars in place of more than 1/3 corroded reinforcement bars incl the charges for cutting, bending, placing and fixing in position using Lok-Fix E-55(Manufactured by M/s Fosroc Chemicals India Ltd) including the cost of all materials rent of all accessories and tools, scaffolding and supporting materials, labour charges including the cost of steel bars complete , all as specified and as directed.

Supply & provisioning Renderoc RG non-shrink cementitious micro concrete (max 120 mm thick) (Manufactured by M/s Fosroc Chemicals India Ltd) to any thickness for beam and column. Fluid micro concrete shall be mixed with 6mm down coarse aggregate and specified quantity of water and mixed using a power operated slow speed stirrer and pouring inside the form work including the cost of all materials, rent for tools, scaffolding, and labour charges, water tight formwork etc. all as per manufacturer instructions complete , all as specified and as directed.

Anaswara Constructions