CERTAIN REPAIR TO BOUNDARY WALL SECURITY FENCING, PATH AND OTHER MISC WORK CAMOUFLAGE AND EXTERNAL PAINTING TO CERTAIN BUILDING AND WATER TANKS AND PERIODCAL SERVICES TO CERTAIN BUILDINGS AT AF STN JODHPUR AND AF STN MANDORE

Amount

Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc.

M&L for Rendering 15mm thick on fair faces of stone work in CM 1:4 finished even and smooth without using exctra cement.

M&L for preparation of new plaster or unplastered surface of walls, applying two coat of cement base paint over a coat of cement primer complete all as specified and directed.

M&L for Rendering 15mm thick on fair faces of stone work in CM 1:6 finished even and smooth without using exctra cement complete all as specified and directed..

M&L for preparation of new plaster or unplastered surface of walls, applying two coat ofdistemper oil emulsion over a coat of primer complete all as specified and directed.

Demolition of concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and directed.

M&L for Pre-cast cement concrete factory made kerb stone with 1:3:6 type C1 (20mm graded Stone aggragate) solid blocks, exc. 10 cm in width and setting in mortar,CM 1:6 complete all as specified and directed.

M&L Preparation of new or previously untreated stone/concrete surfaces of any description, over 10cm in width or grith, not otherwise described and applying two coat of synthetic enamel paint of any colour/pattern, over a coat of priming paints plaster coat complete all as specified and directed.

M&L for machine pressed precast conctete interlocking paver block any shape and size confirming to IS 15658-2006 of 80 mm thickness M-40 Grade made in rubber moulds/rubrised type with scratch proof lacquer coating on top surface with gray cement and pigment complete all as specified and directed.

M&L for machine pressed precast conctete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness M-35 Grade made in rubber moulds/rubrised type with scratch proof lacquer coating on top surface with gray cement and pigment complete all as specified and directed.

M&L sand filling under floors or in foundations including watering and consolidation complete all as specified and directed.

M&L for pre polished chemically treated rubber moulded chequered cement concrete coloured tiles 30cm x30cm x 20 to 25mm thick set, jointed and pointed with grey cement and pigments in neat cement slurry laid over 20mm thick screed bed in CM 1:6. in floors and path complete all as specified and as directed.

M&L 50mm thick PCC (1:2:4) type B1 (using 20mm graded stone aggregate) as in floor, finished surface even and fair without using extra cement complete all as specified and directed.

M&L Glass dividing strips, 38mm wide, 3mm thick and inserted in portion to confirm to design complete all as specified and directed.

M&L 50mm thick PCC (1:3:6) type C2 (using 40mm graded stone aggregate) as in plinth protection finished surface even and fair without using extra cement complete all as specified and directed.

M&L 75mm thick PCC (1:2:4) type B1 (using 20mm graded stone aggregate) as in floor, finished surface even and fair without using extra cement all as specified.

M&L for Squared rubble walling Jodhpur type, regular coursed, well bonded, bedded and solidly hearted, built, built in CM 1:6 complete all as specified and directed.

ditto as per item No 18 above but except stone complete all as specified and directed.

Extra over items as above for hammer dressing to face stones with maximum depression on face from a straight edge not exc 20mm and dressing face beds and joints as specified to squared rubble walling, Jodhpur type, brought upto courses complete all as specified and as directed.

M&L for keyed pointing, to squared rubble, coursed or uncoursed in CM 1:4 complete all as specified and as directed.

Dismantling posts or struts (wood, steel or R.C.C.) embedded in concrete, brick work , masonry etc any section, including taking out embedded portion and making good disturbed ground complete all as specified and directed.

Excavating in post holes (or similar holes) each n exc 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm, watering, and removing surplus soil to a distance n exc 50 m and making good surface in any type of soil complete all as specified and directed.

S&F post and struts in fencing including cutting tops to shape as directed, drilling holes notching for wire, etc. flat iron fillets ( for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc. and similar work conforming to Fe-290 Gde E-165 Complete all as specified and directed.

M&L cement concrete 1:2:4 type B1 (using 20mm graded stone aggragate) in bands, plinth courses, string courses, lacing courses, parapets and railings any height, kneelers, apex stones, bed plates, including necessry form work and moulds complete all as specified and as directed.

Dismantling fencing wire mesh, of any type complete all as specified and directed.

S&F Galvanised. 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails strain- ing bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured) Complete all as specified and directed.

S&F coincertina coil fencing with punch tape concertina coil 900mm dia 10M openable length ( total length 90M) having 50 number rounds per 6M length up to 3M height of wall with existing angle iron Y shaped placed 2.4 M /3 mrt apart and with horizontal RBT (reinforced barbed wire), stud tied with GI staples and GI clip to retain horizontal, including necessary bolts of GI barbed wire tied to angle iron all complete as per direction of engr-in Charge with reinforced barbed tape (RBT) /spring core (2.5mm thick) wire of high tensile strength of 165Kg/Sqm with tape (.25mm thick and wt 43.478 gm/M(cost of MS angle cement concrete block shall be paid seprately and complete all as specified and directed.

M&L for PCC (1:2:4) type B-1 (using 20mm graded stone aggregate) as in coping etc finished fair and even without using extra cement including necessry form work and moulds complete all as specified and as directed.

M&L Preparation of new steel Surfaces of any des-cription, over 10cm in width or grith, not otherwise described and applying two coat of synthetic enamel paint over a coat of red oxide complete all as specified and directed.

Supply only Chain link MS galvanised fencing, any size or type complete all as specified and directed.

Fixing only chain link fencing including line wire, any mesh, size and type to any type of standards, rails, straining bolts, etc including provission of binding wire. Complete all as specified and directed.

S&F mild steel screw bolts (machine made )100mm long, 12mmm dia with hexagonal or sqsuare head at one end and screw the other, or screwed bolt ends, each screw end to be fitted with washer and one hexagonal or square nut, exc 5cm but n.exc 10cm long.

Cleaning of EWCs, IWCs, bottle traps, nahani traps, gully traps, floor traps etc and CI/PVC pipes all types top to bottom including junctions etc, cleaning of sewage line upto GT (Md accn and all types of Accn) complete all as specified and directed.

Cleaning of 100 mm bore SGSW pipe lines in between two consecutive manholes including testing pipe line by pouring of water from manhole to manhole upto entire length where blockage is physically observed as specified and directed by Engineer-in-Charge. Note :- (i) Measurement for these items shall be recorded from inner face of walls between two consecutive manholes. (ii) If cleaning of sewage line is not feasible without removing sludge from the manhole. The sludge from the manholes shall be cleaned all as decided by the executive and shall be measured and paid separately under item No 36. (iii)If any blockage removed by the contractor will reoccur due to negligence in workmanship by the worker within ten days of cleaning, the same shall be recleaned without any extra cost to the Govt.

All as per Srl item No 35 above but 150/200 mm bore SGSW pipe.

Cleaning of manhole of any description, any size and depth including removing sludge and deposited outside MD land etc complete all as directed by Engineer-in- Charge. Note - (i) If any blockage removed by the contractor will reoccur due to negligence in workmanship by the worker within ten days of cleaning, the same shall be recleaned without any extra cost to the Govt.

Excavating in trenches in any type of soil, n.exc. 1.5m wide and n.exc 1.5 in depth, for foundation, etc. or for shafts, wells, cess pits, manholes, pier holes, etc n.exc. 10 sqm on plan and n.exc 1.5m in depth and getting out.

All as per item No 38 above but exc. 1.5 m but n.exc. 3.00 m in depth.

Demolition and breaking up drain pipes (Salt glazed stone ware, AC or Reinforced concrete) set in cement mortar complete all as specified and directed.

M&L for cement concrete 1:4:8 type D-2 using 40 mm graded stone aggregate as in bed to drain pipes of size 150 mm bore, including packing under & haunching against the sides of pipes after they are laid and tested complete all as specified and directed..

M&L for Salt-glazed stoneware drain pipes laid in trenches and jointed as specified of 150mm internal dia of pipe complete all as specified and directed..

Demolation of brickwork or stone/ boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed.

M&L for Cement concrete 1:4:8 type D2 (using 40mm graded stone aggragate) in foundations, filling and mass-concrete complete all as specified and directed.

M&L for pre-cast cement concrete 1:3:6 type C1 (20mm graded stone aggragate) in block masonry with solid blocks, exc. 10 cm in width and setting in cement mortar, 1:6 complete all as specified and directed.

M&L for Rendering 10mm thick on fair faces of brick work or concrete surfaces in CM 1:6 finished even and smooth without using exctra cement and complete all as specified and directed..

Supply only integral water proofing compound ISI marked.

M&L Providing precast cement concrete 1:2:4 type B1 (ussing 20mm graded stone aggragate) as in manhole covers etc. and setting in mortar complete with joints to match ( reinforcement will be measured and paid seprately) and complete all as specified and directed.

M&L Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips and complete all as specified and directed.

M&L for Jodhpur stone roof slabs, self faced 7.5cm to 10 cm thick, 25 cm to 35 cm wide hoisted and set, jointed and grouted in cement mortar 1:6 and complete all as specified and directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm and complete all as specified and directed.

Removing excavated material n exc. 50 m and depositing where directed at a level n exc. 1.5 m above the starting point and complete all as specified and directed.

Cutting into existing manholes for connecting new drains of 150/200 mm internal dia, making good to pipe and rendering, cutting out existing benching for and forming branch channel ( ½ round or 3/4 Section) in cement concrete 1:2:4 type B-1 smooth finished and reforming benching as required and complete all as specified and directed..

S&F salt glazed stoneware gully traps of size 150 x 150 mm, square or rounded mouthed, type `P' fixed in CM 1:6 and cover with RCC cover slab of size 200 X 200 X 50mm and complete all as specified and directed.

M&L for cement concrete (1:2:4) type B1 using 20mm graded stone aggregate as in surface channels, drains (forming fair finished channel shall be measured and paid for separately) complete all as specified and directed..

Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete using extra cement including forms, moulds mitered/stopped ends, etc complete all as specified and directed.

PVC (SWR) pipes 110 mm dia single socketed, in any length with rubber ring joints laid in trenches or in floors complete all as specified and directed.

Preparing old surfaces plastered or unplastered surface of wall by brooming down or steel wire brushing scrapping down smoke spot moulds moss and efflorescent salts and treating oil and greasy spots washing rubbing down and stopping of previously untreated /painted surface and M&L for applying one coat of (finishing coat) of cement base paint in different tint/shade as approved by Engineer-in-charge

Preparing old painted surfaces of wall etc n.exc 0.1 sqm each including cutting in edges and appying one coat of synthatic enamel paint complete all as specified and directed.

M&L for writing letters or figures (Block, Roman, Italic or Indian) n.exc 30 cm high using synthetic enamel paint Ist quality complete all as specified and directed.

M&L for writing Stops, commas, short lines, dashes, hyphens brackets etc using synthetic enamel paint Ist quality complete all as specified and directed.

Preparing old painted surfaces of wood and wood based materials of any description over 10cm in width or girth and M&L for applying one coat of synthetic enamel paint complete all as specified and directed.

Preparing old painted steel & iron surfaces of any description over 10cm in width or girth and M&L for applying one coat of synthetic enamel paint complete all as specified and directed.

Preparing old plastered or unplastered surface of wall, complete removal of existing treatment by steel wire brushing/metal sheet including washing rubbing down and stopping of distempered and painted surface and applying two coats of exterior emulsion paint in different tint/shade,(camouflage pattern), as approved by Engineer-in-charge, over one coat of alkali resistant primer as per manufacture's instructiuons all as specified and directed.

M&L for preparation of old plastered or unplastered surfaces of walls and applying one coat of white wash.

M&L for preparation of old plastered or unplastered surfaces of ceiling and applying one coat of white wash.

M&L for complete removal of existing treatment from walls and applying two coat of oil emulsion distemper (OBD), over one coat of alkali resistant primer, over a thin layer of wall care putty complete all as directed.

M&L for preparation, removing/scrapping down existing surface where ever necessary of old plastered or unplastered surfaces of walls and applying one coat(finished coat) of oil emulsion distemper (OBD) white or tinted including removing existing nails, if any, any Nos and filling the disturbed /uneven surface, holes/voids with wall care putty where ever necessary to achive the smooth surface as directed.

M&L for preparation of old painted steel surfaces of any description, over 10 cm in width or girth, not otherwise described and applying one coat of synthetic enamel paint.

M&L for preparation of old painted wooden surfaces of any description, over 10 cm in width or girth, not otherwise described and applying one coat of synthetic enamel paint.

M&L for preparation, removing/scrapping down existing surface of old painted brick, stone, concrete, asbestos cement or plaster surfaces of any description, over 10 cm in width or girth not otherwise described and applying two coat of plastic emulsion paint over a coat of wall catre putty.

Bansal Enterprises

M/s Ankit Enterprises