REPAIR / RECANNING AND POLISHING TO WOODEN FURNITURE AND UPHOLSTERING OF SOFA SETS AT VARIOUS LOCATIONS OF OKHA AND PORBANDAR UNDER GE NAVY PORBANDAR

Amount

Repairs to Chair dining JCOs/OR FD-279, 228, FD/MAP/II/05

Removing the following U/S components chair dining and providing new components of size and shape shown in Drg Polishing all exposed parts of chair dining after repairs / replacement of Parts.:-

Rear leg made of size 30x55x890mm IInd class Hard wood

Front leg made of size 30 x 55 x 460 mm IInd class Hard wood

Stiffener made out of 20 x 25 x 440 mm 2nd class Hardwood

Seat stiffener duly holed for canning made out of IInd class Hardwood of size 440x65x30mm

S&F of PVC Shoe

Removing of UNSV /Broken PVC seat of chair dining JCO/Ors and providing new seat 4mm thick with 4x10mm thick Ribs moulded alongwith seat in single piece & screwed with frame Make Amko. All as specified in drg and as directed by Engr-in charge.

S&F of supporter under PVC seat made of size 30 x 65 x 356 mm 2nd class Hardwood all as specified by Engr-in-Charge.

S&F new GI 'L' shaped bracket of size 50mm x 50mm x 3mm with suitable screws to tighten the wooden frame of Chairs as required and as directed by Engineer-In-Charge.

Repairs to Chair dining offrs FD/MAP/II/04

Removing the following U/S components chair dining and providing new components of size and shape shown in Drg Polishing all exposed parts of chair dining after repairs / replacement of Parts.:-

Rear leg made of size 35x50x 950 mm IInd class Hard wood

Front leg made of size 35 x 50 x 450 mm IInd class Hard wood

Stiffener made out of 20 x 25 x 440 mm 2nd class Hardwood

S&F of PVC Shoe

Removing of existing old UNSV tapestry cloth from cushion and S&F New tapestry cloth. Cost of tapestry cloth should be not less than Rs 250 per meter size of cushion 450x450x75mm thick

Removing of old existing cushion's and replacing with new cushions of size 450x450x75mm thick 32 mm density of Make : Sleep well /Kurlon/MM Foam approved by GE and covering with existing old tapestry cloth all as specified.

S&F new GI 'L' shaped bracket of size 50mm x 50mm x 3mm with suitable screws to tighten the wooden frame of Chairs as required and as directed by Engineer-In-Charge.

Repairs to Table bed side FD/E6/MAP/15®

Removing U/S top and S&F new top made of 19mm thick pre laminated particle board of BWR gde confirming to IS:303 all as shown in drg and directed by Engr-in- Charge

Removing of U/s handle mm long and S&F new handle 100mm long powder coated non ferrous metal alloy all as per drg and as specified.

Removing the u/s Telescopic Channel &S&F new Telescopic Channel duly powder coated and 1.6mm thick

S&F of PVC Shoe

Repairs to Bed hard with Plywood Top FD-246/247

Removing U/S plywood from Bed hard & supply & fix new plywood of size 6'.3"x3' of 12 mm thick ply BWR Gde of Make KITPLY/CENTURYPLY/ARCHIDPLY as shown in drg

Removing of U/s legs supply and fix new legs of size 50 x 50 mm at top and 30 x 30 mm at bottom of Ist class Hard wood (Teakwood) of shape and size all as per drg and as specified.

Removing the u/s long rails supply and fix new long rail of size 1980 x 100 x 40 mm of Ist class Hard wood

Removing the u/s Short rails supply and fix new long rail of size 900 x 100 x 40 mm of Ist class Hard wood

S&F 4 mm thick veneered phenol bonded ply wood one side teak face on both sides of head rest of the bed and provision of 4 mm thick teak wood beading all round all as per drg.

Repairs to Table centre (size 900x450mm ) FD-274

Removing the following existing U/S components of Table centre and providing new components of size and shape shown in Drg and polishing all exposed parts of Table centre after repairs / replacement of parts .

Top 18 mm thick PFT (Post Forming Top) pre laminated particle board exterior grade, Lamination (teak Shade) extended upto minimum 50mm from the bottom edge fixed in position all as specified and directed.

Legs made of IInd class Hard wood

Top battern stiffener short made of IInd class Hard wood

Top batten stiffener long made of IInd class Hard wood

Repairs to PEG TABLE FD-277, FD-384

Removing the following existing U/s components of table Peg and providing new components of size and shape shown in drg and polishing all exposed surface of item after repairs / replacement of part:-

Top 18 mm thick PFT (Post Forming Top) pre laminated particle board exterior grade, Lamination (teak Shade) extended upto minimum 50mm from the bottom edge fixed in position all as specified and directed.

Legs made of IInd class Hard wood

S&F new GI 'L' shaped bracket of size 25mm x 25mm x 3mm with suitable screws to tighten the wooden frame of Table as required and as directed by Engineer-In-Charge.

Repairs to chair writing: FD - 280

Removing the following unserviceable components of chair writing and providing new components of size and shape shown in Drg and polishing all exposed parts of chair writing after repairs / replacement of Parts.:-

Rear leg made of IInd class Hard wood of size 890x55x30mm

Front leg made of IInd class Hard wood of size 675x55x30mm

Stiffener made of IInd class Hardwood of size 535x65x30mm

Arm rest made of IInd class Hardwood of size 500x60x25mm

S&F new GI 'L' shaped bracket of size 50mm x 50mm x 3mm with suitable screws to tighten the wooden frame of Chairs as required and as directed by Engineer-In_Charge.

Repairs to Chair Easy FD-229 ,201,17

Removing the following U/S components chair easy and providing new components of size and shape shown in Drg and Polishing all exposed parts of chair easy after repairs / replacement of Parts.:-

Rear leg made out of 50 x25 x 890mm size IInd class Hard wood.

Front leg made of size 50x25 x 545 mm IInd class Hard wood.

Batten rail under seat frame made out of 50 x 25 mm IInd class Hard wood

Hand rest / arm rest made out of 610x65x25 mm IInd class Hard wood all as specified

Re-caning of Wooden Chairs and Chair Verandah:

Re Canning of chairs except chair verandah. Taking down existing u/s old cane from chairs and other furniture like stool dressing, bin soiled linen etc. Cleaning to cane holes. Supply and fix new plastic cane of 2 mm wide, 0.5 mm thick, 1/2 round, approved quality of "GODREJ PATTERN" using minimum weight of cane mentioned in drg including removal of existing polishing from the wooden surface and repolishing with french polish 4 mm wide 1/2 round cane to be used as border al around all as shown in drg (Make Maharastra plastic industris or equivalent) FD-280, 279, 229, 75(M), 244, 250, 252

Taking down unserviceable plastic cane or nylon newar from chair verandah by supply and fix new plastic cane of 4 mm wide 0.5 mm thick white colour half round. Weaving shall be matt pattern and cane shall be Maharashtra plastic , Industries or Equivalent Matt pattern complete all as specified and as directed by Engineer - in - Charge. FD-256, FD-359,

Repairs to Teapoy, 600 mm X 450 mm X 540 mm: FD– 382, 278

Removing the following U/S components of Teapoy and providing new components of size and shape shown in Drg and polishing all exposed parts of Teapoy after repairs / replacement of parts:-

Top 18 mm thick PFT (Post Forming Top) pre laminated particle board exterior grade, Lamination (teak Shade) extended upto minimum 50mm from the bottom edge fixed in position all as specified and directed.

Legs made of IInd class Hard wood

Top batten stiffener short made of IInd class Hard wood

Top batten stiffener long made of IInd class Hard wood

S&F new GI 'L' shaped bracket of size 50mm x 50mm x 3mm with suitable screws to tighten the wooden frame of Table as required and as directed by Engineer-In-Charge.

Repairs to table writing,: FD - 275, 249

S & F of following u/s components and polishing after repairs :-

Top 18 mm thick PFT (Post Forming Top) pre laminated particle board exterior grade, Lamination (teak Shade) extended upto minimum 50mm from the bottom edge fixed in position all as specified and directed.

Removing u/s legs , supply and fix new legs of 1st class Hard wood as per existing pattern

Removing u/s drawer and replacing with new drawer made with 12 mm plywood BWR Gde as per existing pattern

Replacement of doors with 18 mm pre -laminated board on one side nature Teak face of Make ACTION TESA with 4 mm thick teak wood beading and piano hinges screwed and new knob all as shown in drg

Dismantling the old unserviceable lock and S&F new brass lock 6 lever make: Harison/Godrej as the existing one, complete all as specified and shown on drawing.

Removing the u/s Telescopic Channel & S&F new Telescopic Channel duly powder coated and 1.6mm thick

Removing the u/s knob & S&F new knobs of aluminium anodized dark brown in shade as per existing one, complete all as specified and shown on drawing.

Repairs to table dining 6/8 persons: FD - 239,273,376, 165

Removing the US table top supply and fix new top of size 1500x900mm of 18 mm thick pre laminated particle board top one side natural Teak face of Make:ACTION TESA / ARCHIDPLY / ASSOCIATE duly provided with 4 mm thick teak wood edging all around

Removing the US table top supply and fix new top of size 1800x900mm of 18 mm thick pre laminated particle board top one side natural Teak face duly of Make:ACTION TESA / ARCHIDPLY / ASSOCIATE provided with 4 mm thick teak wood edging all around

Removing the u/s legs supply and fix new legs of size 60 x 60 x 750 mm of 1st class Hard wood (Teakwood)

S&F new GI 'L' shaped bracket of size 50mm x 50mm x 3mm with suitable screws to tighten the wooden frame of Table as required and as directed by Engineer-In-Charge.

Repairs to table dining 4 persons: FD/MAP-II/03

Removing the US table top supply and fix new top of size 1200x900mm of 18 mm thick pre laminated particle board top one side natural Teak face of Make:ACTION TESA / ARCHIDPLY / ASSOCIATE duly provided with 4 mm thick teak wood edging all around

Removing the u/s legs supply and fix new legs of size 60 x 60 x 750 mm of 1st class Hard wood (Teakwood)

S&F new GI 'L' shaped bracket of size 50mm x 50mm x 3mm with suitable screws to tighten the wooden frame of Table as required and as directed by Engineer-In-Charge.

Repairs to TABLE DRESSING GENTS FD/E6/MAP/16

M&L after removing the existing U/s parts from Table dressing Gents, repairing including S&F new parts of Table dressing gents and all as specified and shown in Drg and directed by Engr-in-charge and polishing to table dressing gents with one coat of spirit polish after preparation of surface

Mirror shall be of 5.5 mm thick, Backed by 12mm thick BWR Gde plywood as per IS:303, covered by decorative mould.

Removing broken /UNSV glass shelves and S&F new Glass shelves of 8mm thick all as per drg

Removing broken / UNSV Glass Holder and S&F new Glass Holder all as specified and shown in Drg.

Removing broken / UNSV Magnet Catch and S&F new Magnet Catch all as specified and shown in Drg.

Repairs to Table 900 x 600 mm with drawers and with outdrawers. FD -283, 284

Removing broken legs and replacing with new legs made out of IInd class Hard wood of size 740x50x55mm and as specified in Drg.

Top 18 mm thick PFT (Post Forming Top) pre laminated particle board exterior grade, Lamination (teak Shade) extended upto minimum 50mm from the bottom edge fixed in position all as specified and directed.

Removing broken drawer from table with drawers and replaced new drawer made of IInd class Hard wood and fixed with 6 mm ply wood bottom BWR grade of Make ACTION TESA / ARCHIDPLY / ASSOCIATE all as per drg

Removing the u/s Telescopic Channel & S&F new Telescopic Channel duly powder coated and 1.6mm thick

S&F new GI 'L' shaped bracket of size 50mm x 50mm x 3mm with suitable screws to tighten the wooden frame of Table as required and as directed by Engineer-In-Charge.

Upholstering of Sofa Set Five Seater/Sofa Chairs: FD-281, 373,258

Removing of existing old UNSV tapestry cloth from cushion and S&F New tapestry cloth duly provided by Zip. Cost of tapestry cloth should be not less than Rs 250 per meter size of cushion 560x520x100mm thick

Replacement of old cushions of Sofa Set Five Seater/Sofa Chairs with newones: FD-281, 373,258

Removing of old existing cushion's and replacing with new cushions of size 560 x 520x100mm thick 32 mm density of Make : Sleep well /Kurlon/MM Foam approved by GE and covering with existing old tapestry cloth all as specified.

Repairs to TABLE DRESSING LADIES WITH STOOL FD/MAP-II/07

M&L after removing the existing U/s parts from Table dressing ladies repairing including S&F new parts of Table dressing ladies and all as specified and shown in Drg and directed by Engr-in-charge and polishing to table dressing ladies with one coat of spirit polish after preparation of surface

Mirror shall be of 5.5 mm thick, Make ' MODIGUARD ' duly Teak wood 6 mm thick frame and 6 mm thick plywood BWR Gde 6 mm thick on back side of the frame

Top 18 mm thick pre laminated particle board one side Teak finish and one side veneered of Make Action Tesa with 4mm thick Teak wood edging around.

Removing broken Handles, S&F new 75mm long D shaped stainless steel handle as specified.

Removing of existing old UNSV tapestry cloth from cushion and S&F New tapestry cloth duly provided by Zip. Cost of tapestry cloth should be not less than Rs 350 per meter size of cushion 440x350x75mm thick

Removing of old existing cushion's and replacing with new cushions of size 440 x 350x75mm thick 32 mm density of Make : Sleep well /Kurlon/MM Foam approved by GE and covering with existing old tapestry cloth all as specified.

Removing the u/s Telescopic Channel &S&F new Telescopic Channel duly powder coated and 1.6mm thick

Removing broken / UNSV Magnet Catch and S&F new Magnet Catch all as specified and shown in Drg.

HAT STAND WITH MIRROR. FD-233

Looking Mirror : M&L for removal of old unserviceable mirror and S&F Looking mirror of size 460x300mmx5mm of approved quality make Modi/ATUL duly fixed in the wooden frame made of teak wood and 6mm thick commercial ply wood finished with french polish of glossy shining to be provided shape and size all as specified by Engr-in-Charge.

Dismantling the old unserviceable Aluminum pegs and S&F new Aluminum pegs to shape and size as the existing one, complete all as specified and shown own drawing.

Dismantling the old UNSV wooden frame S&F new wooden frame made of teak wood shape and size all as specified by Engr-in-Charge

Side Board FD-1112

Dismantling the old unserviceable top of Side Board & S&F new top made from 18mm thick prelaminated exterior grade particle board, bonded with phenol formaldehyde conforming to IS 3087-1989, ISI marked,one side natural teak face shade and other side balancing white, edging all around with 4mm thick teak wood beading duly french polished including tightening the existing frame before fixing the top, shape and size all as specified and shown on drg and as directed by Engr-in-Charge.

Removing of U/s handle and S&F new handle 100mm long powder coated non ferrous metal alloy all as per drg and as specified.

Replacement of old unserviceable drawer with new drawer made as per specications shown on drg.

Removing of old unserviceable back ply of side board and supply and fixing the new back ply of same size made out of 06mm thick commercial plywood (ISI marked) all as shown in drawing and as directed.

TV TROLLY FD/E6/MAP/06®

M&L after removing the existing U/s parts from TV Trolly repairing including S&F new parts of TV Trolly and all as specified and shown in Drg and directed by Engr-in-charge.

Removing of UNSV Glass Shutter and S&F new Glass Shutter shall be of 5.5 mm thick, Make ' MODIGUARD ' all as specification and directed by Engr-in Charge.

Replacement of old UNSV Stainless Steel fitting for Glass Shutter with new fitting as per specications shown on drg and directed by Engr-in-Charge.

Replacement of old unserviceable drawer with new drawer made as per specications shown on drg.

Dismantling the old unserviceable top of TV Trolly & S&F new top made from 19mm thick prelaminated exterior grade particle board, bonded with phenol formaldehyde conforming to IS 3087-1989, ISI marked,one side natural teak face shade and other side balancing white, edging all around with 4mm thick teak wood beading duly french polished including tightening the existing frame before fixing the top, shape and size all as specified and shown on drg and as directed by Engr-in-Charge.

Removing of U/s handle and S&F new handle 100mm long powder coated non ferrous metal alloy all as per drg and as specified.

Removing the u/s Telescopic Channel &S&F new Telescopic Channel duly powder coated and 1.6mm thick

Removing the u/s Castors & S&F new Castors of 54mm dia fitted with suitable screw all as specified and directed by Engr-in-Charge.

Removing the u/s Magnet Catcher & S&F new Magnet Catcher all as specified and directed by Engr-in-Charge.

POLISHING TO WOODEN FURNITURE

(i) Material and Labour for scrapping the existing polished surface with proper/suitable sand paper, filling up the crevices and holes with proper wax to make surface even and smooth, preparation of surface and applying One coat of french polish to the following items complete all as specified and as directed. (ii) Work will be executed in BSO's store accn as well as where the furniture exists in different user unit in OTM/Md Accn of Navy at Porbandar & Okha under the jurisdiction of GE Navy Porbandar

Material and Labour for french polishing one or more coats on surfaces of any description, surfaces over 10cm width or girth including cleaning and preparing the surface including a coat of wood filler on old work complete all as specified and as directed by Engineer - in - Charge.

Bed hard (FD - 246, 21(M))

Chair dining Offrs (FD/E6/MAP/10(R))

Chair easy (FD - 17(M), 229)

Chair dining (FD – 16,228,279)

Chair writing (FD - 20(M), 280)

Hat stand with mirror (FD - 233, 362)

Peg table (FD - 25(M), 236,384)

Sofa chairs (Single) (FD - 373)

Sofa set 4 seater (FD - 373,281, 258)

Sofa set 5 seater (FD - 373,281, 258)

Table dressing Ladies (FD - 378, 32(M))

Table dining 8 persons (FD - 376, FD - 273)

Table dining 6 persons (FD - 376, FD - 273)

Table dining 4 persons (FD/MAP-II/03)

Table centre (FD - 29(M), 274)

Table writing (FD-33(M), 249, 275)

Table 3'x2' w/o drawer (FD-42(M),FD-284)

Table 3'x2' with drawer (FD-41(M), FD-283)

Teapoy (FD - 278, 232)

M/S Super Steel Works

JAY BHARAT METAL SUPPLIERS

Vinayak Distributors

S t modi

OM ENTERPRISE

shree chamunda enterprise

Dhangot Brothers

Harsh Infrastructure

BABUBHAI BHIMABHAI PANDAVADRA

SANVI ASSOCIATES