Renovation- Interior fit out Works at office space of SIDBI in Morbi and Rajkot, Gujarat

Total Amount with GST 11,763,615.00

11 Total Amount with GST 5,722,927.00

GRAND TOTAL 818709.43 368065.00

DSR NO DESCRIPTION TOTAL AMOUNT TOTAL AMOUNT

DSR NO DESCRIPTION TOTAL AMOUNT TOTAL AMOUNT

DSR NO DESCRIPTION TOTAL AMOUNT TOTAL AMOUNT

GRAND TOTAL (A+B+C+D+E) 90236.00 174420.00

S NO DESCRIPTION UNIT QUANTITY RATE TOTAL AMOUNT TOTAL AMOUNT

2022/ DESCRIPTION OF ITEM UNIT QTY RATES

NO. AMOUNT(RS.) Amount

7 1 Providing, laying, testing & commissioning of 'C' class heavy

duty MS pipe conforming to IS 3589/IS 1239 including

Welding, fittings like elbows, tees, flanges, tapers, nuts bolts,

gaskets etc. and fixing the pipe on the wall/ceiling with

suitable clamp/support frame and painting with two or more

coats of synthetic enamel paint of required shade complete

21 2 Providing, fixing, testing & commissioning of 15mm dia

quartzoid bulb type sprinklers of rating 68 degree centigrade

with required accessories : 0 - -

21.1 Pendent Sprinkler/Upright Sprinkler Each 0 522.00 -

16.11.1 3 BUTTERFLY VALVE (MANUAL) with C I body SS disc nitrile

sheet & O - ring & PN 16 pressure rating as specified.

18.25 4 Supplying, installation, testing & commissioning of sprinkler

flexible pipe (UL Listed) of stainless steel complete with 15

NPT on reducer thread with maximum working pressure of

175 PSI test pressure of 875 PSI (Burst) with branch line

(Inlet) 25mm NPT male thread to sprinkler head (Outlet)

15mm NPT female thread with reducer, nipple, 2 side

brackets, center bracket, stockbar of following sizes

complete as required

5 Providing and fixing ISI Marked of approved make Fire

Extinguishers complete with all accessories as per

manufacturer's specifications.

MR a ABC dry powder stored pressure type 2 kg capacity

Digitally signed by AMIT

2022/ DESCRIPTION OF ITEM UNIT QTY RATES

NO. AMOUNT(RS.) Amount

MR b ABC dry powder stored pressure type 1 kg capacity

SUB TOTAL(A) - -

Digitally signed by AMIT

Sr.no Specification Qty Unit Rate

3 seater Dimension : (L)1650mm X (D)750mm X (H)710mm 3 nos 46800 140,400

2 seater Dimension(L)1390mm X (D)750mm X (H)710mm 0 nos 37800 0

Supplying, and placing in position of sofa with premium Leatherette upholstery adds class to the

soft cushioned backrest and seating. Material & subtype:Premium Leatherette, Colour & Colour

Family:as per requirement, Seating Height:16.14" ,Legs:Stainless Steel, Finish:Matte, Size:Compact,

Style:Modern, Texture:Two Tone. steam beech solid wood have used for framing construction of

sofa .The seat cushion is made of multi layered foam of density 32-35 kg/m3. The seating cushion

have 2.75 & 1.75 inches of elastic webbing. The thread used is nylon bonded to provide lasting

stitch strength . The backrest has a foam of 28kg/m3 with polyster polyfill outer layer of 200 gsm.

2 DGM High Back Chair 1 nos 14500 14,500

Supplying and placing in position of 360 degrees revolving high back chair . The chair of Size :-

(W)590mm X (D)505mm X (H)1180mm - 1280mm. The chair shall be ergonomically design contour

lumbar back design made of 12mm thick BWR plywood (IS Grade - 303 for seat and back)

upholstered with leatheritte and cut foam. The chrome plated loop armrest with padded upholstery is

provided for extra comfort. The chair shall be provided with pneumatic height adjustment which shall

have stroke of 10.0 +/- 0.3 cm . Five star chrome base with nylon castors . Chair seat has foam of

density 30-35 (+/-2kg /m3) Dimensions The backrest has a foam of 28kg/m3.

3 DGM Visitor Back Chair 3 nos 7000 21,000

Digitally signed by AMIT

Sr.no Specification Qty Unit Rate

Supplying and placing in position of medium back cantilever chair of size: (W)610mm X (D)505mm

X (H)990mm.A contemporary design with an all black finish, . Material & subtype:Premium

Leatherette, Colour & Colour Family:Black, Dimension(W)610mm X (D)505mm X (H)990mm, Back

Type:Cantilever, Base:Cantilever Frame, Base Type:Cantilever, Maximum Seating Height:19".The

Seat & back are made up of 12mm thk hot pressed plywood upholstered with PVC with polyurethane

foam, chair seat has foam of density 32-35 kg/m3. The backrest has a foam of 28kg/m3.

4 Conference Medium Back Chair 1 nos 8500 8,500

Supplying and placing in position of 360 degrees revolving medium back chair . The Craze chair of

Size :-(W)590mm X (D)505mm X (H)1005mm - 1115mm. The chair shall be ergonomically design

contour lumbar back design made of 12mm thick BWR plywood (IS Grade - 303 for seat and back)

upholstered with leatheritte and cut foam. The chair shall be provided with pneumatic height

adjustment which shall have stroke of 10.0 +/- 0.3 cm . Five star chrome base with nylon castors .

Chair seat has foam of density 30-35 (+/-2kg /m3) The backrest has a foam of 28kg/m3.

5 AGM High Back Chair 2 nos 13500 27,000

Digitally signed by AMIT

Sr.no Specification Qty Unit Rate

Supplying and placing in position of 360 degrees revolving high back chair of size: 660mm (L) x

490mm(D) x 1315mm(H). The seat cushion to be upholstered on 10-12mm thick water proof

plywood and moulded foam. The seat to be made with 12 mm thick hot pressed BWR plywood (IS

grade - 303) upholsetered with Polyurethane foam and mesh fabric over it. The chair shall be

provided with self tension single locking mechanism and pneumatic height adjustment which shall

have stroke of 10.0 +/- 0.3 cm .The black .The pneumatic height adjustment shall have adjustment

stroke of 100 mm and shall be operated at 30kgs extension force.The Seat & back are made up of

12mm thk hot pressed plywood upholstered with PVC with polyurethane foam, chair seat has foam

of density 32-35 kg/m3. The backrest has a foam of 28kg/m3. adjustable arm rest and head rest

6 Medium Back Chair (work station & conference room) 29 nos 7500 217,500

Supplying and placing in position of 360 degrees revolving medium back chair. The breathable mesh

back chair with cushioned fabric seat shall be ergonomically design with adjustable lumbar back

support . The chair shall be provisioned with adjustable armrest (Up-Down) with PP padding and

Adjustable Headrest(Can Adjust Movement). The chair shall be provided with self tension single

locking mechanism and pneumatic height adjustment which shall have stroke of 10.0 +/- 0.3 cm .The

pneumatic height adjustment shall have adjustment stroke of 100 mm and shall be operated at

30kgs extension force.The Seat are made up of 12mm thk hot pressed plywood upholstered with

PVC with polyurethane foam, chair seat has foam of density 32-35 kg/m3.

7 AGM Visitor Chair & conference room side chairs 12 nos 7000 84,000

Digitally signed by AMIT

Sr.no Specification Qty Unit Rate

Supplying and placing in position of Fix cantilever chair,the chair made of full mesh in black colour..

use of ply: 12 mm thick hot pressed bwr plywood (is grade - 303 for seat).Seat: 40 ± 2 mm thick

polyurethane foam with density 32 (±3) kg per cu meter for best quality cushioning in seat, back:

frame of design shall be curved made of two pieces injection moulded frame cover with mesh

.backrest support adjustable lumbar support. Only seat size is 500mm(l)x 500mm(d)x 470mm(h) &

the back size is 465mm(l)x 550mm(h) ,Seat max height is @ 470mm .Fixed cantilever chair .base:

chrome plated tubular frame of cantilever type..The Seat are made up of 12mm thk hot pressed

plywood upholstered with PVC with polyurethane foam, chair seat has foam of density 32-35 kg/m3.

8 Modular Workstation

Dimesnion: 1500mm(L) x 1500mm(L) x 600mm(D) x 1200mm(H) 12 nos 29925 359,100

Modular Workstation With Side Top with 3 drawer Pedestal Size 1500W x 600D x

750/1200H.Partition NI-60mm Partition Ht. 1200mm, Double Raceway systems Skirting label and

below the table top . lower tile both side laminated and upper tile inside side fabric, White

Board and white Tinted Glass . With Side Top Size 900W x 400D x 750H 25mm thick Gabel end

18mm thick MDF board., and 3Drawer top supported Pedestal unit Size 400W x 400D x 725H made

in 18mm thick..Complete Made in MDF Board.. Laminate 1-Frosty White, Laminate2 For drawer

Facia-Honkong Blue, Fabric-F 161 Dolphin Blue, Powder Coating-Munshel Gray. and White Tinted

9 Linear Workstation

Dimension: 1200mm(L) X 600mm(D) x 1050mm(H) 4 nos 21735 86,940

Digitally signed by AMIT

Sr.no Specification Qty Unit Rate

Supplying, and placing in position of linear workstation as per Image.The worktop made out of 25mm

thk. Prelam Particle board with 2 mm thk PVC edge banding.The Table top supported on Mild Steel

of size 50mm x50mm Slanted Leg and 50mm x 25mm Horizontal connectors with Powder coting of

50 Micron.Middle Leg :- 0.8 mm thk Metal panel fixed on both side of the "T" leg for Vertical wire

carrying purpose.(Sharing Workstation). 0.8 mm thk Single/Double metal powder coated raceway

with Powder coting of 50 Micron below top for wiring.Vertical wire carrying pole with powder coating

50 micron below top for wiring( Non- sharing workstation ). Also having a provision of ms perfoated

sheet hanging modesty. provision of glass divider rest on the "D" brackets on the table top between

opposite seatings. All working or non working edges shall be provided with machine pressed 2mm

thick PVC edging using special hot melt glue at hot temperature. Provision of pullout PVC keyboard

tray and CPU trolley for each seating. Also a provision of Pedestal Unit (size:- L-400mm x D-450mm

x H-600mm) with a combination of 2 drawer & one filing drawer. The pedestal storage unit shall be

made of 18 mm thick prelaminated Particle board with provision of handles & Locking arrangement

Main Table Dimension (L) 1650mm x (D) 750mm x (H) 750mm 80000

Side Runer Dimension (L) 1050mm X (D) 450mm X (H) 750mm

Supplying, and placing in position of main Table as per Image/ drawing.The Table top are made out

of 25mm thk prelam particle board with 2mm thk pvc edge banding & side panel & modesty panel

made up of 18mm thick pre-laminated particle board .The working edges shall be provided with

machine pressed 2mm thick PVC edging using special hot melt glue at hot temperature. The table

have a provision of free standing Side Storage of size 1050mm L x 450mm D x 750mm Ht., Storage

Top made out of 25mm thick pre laminated particle board and rest all storage to be made out of 18

mm thick prelaminated particle board . All exposed edges shall be provided with machine pressed 2

mm thick PVC lipping glued with hot melt EVA glue. Storage having a provision of 3 drawer unit, two

openable shutter with D shape handle & central locking arrangement.

Main Table Dimension (L)1800mm X (D) 900mm X (H)750mm

overall Side Runer Dimension (L)1800mm X (D) 450mm X (H) 675mm

Digitally signed by AMIT

Sr.no Specification Qty Unit Rate

Supplying and placing in position of main table as per photograph/drawing .The table shall be made

out of 25mm thick pre -laminated particle board of approved shade. The working and non working

edges shall be finished with machine pressed with 2mm PVC egdge banding. The table top shall be

supported with MS powder coated "C" shape leg of size 50mm x 50mm with connectors of size

40mm x 40mm. The front modesty are made out of 18mm thick prelaminated particle board with

2mm thk pvc edge banding. The table shall be provisioned with Side unit of overall size:

1800mm(L) x 450mm(D) x 675mm(H) . Side storage having a provision for three equal drawer unit

and two openable shutter & one open storage with shelf in it. The Side unit top shall be made out

of 18mm thick pre laminated particle board and rest all storage to be made out of 18mm thick pre

laminated particle board. Provision of Junction box, wire raceway and 6 module fliptop box for wire

passing or as per site requirement.

12 Medium Height Partition

Supplying and placing in position of sliding tile base modular Workstation as per photograph. Free

standing partition height 1200mm and should be minimum of 62-67mm thick. Partition inner frame is

1.0-1.2mm thick mild steel. Horizontal and vertical trims are made out of extruded aluminum of 1mm

thick. All Panels/trims shall be powder coated with 50 micron. Aluminum trims are elegantly fixed

with hidden connectors on the partition. The frame work shall be fitted with 9mm thick pre laminated

Particle tiles of approved shade. Partition shall have provision for pin up board with fabric/ white

marker/ laminated of approved shade. Partition framework shall have adequate provisions for the

movement of electric data cables at desired 2 levels; one at skirting and another above / below the

table top. The complete partitioning work shall be carried out as per the approved drawing. The

product should be as per above given specification under the guidance of project Engineer in charge.

13 Conference Table

Supplying and placing in position of conference table of required size as per image/drawing. The

work surface top should be of thickness 42mm top prelaminated particle board with 2mm thick PVC

edge banding. The side panel are made up of 36mm thick prelaminated particle & modesty panel

are made out of 25mm thick prelaminated particle board with 2mm thick PVC edge banding. The

wire carrier should be made from 0.6mm thick CRCA & powder coated 40-50 microns. Also having

a provision of 6 module flip top box & metal raceway for wire flow.

14 Pantry Table

Digitally signed by AMIT

Sr.no Specification Qty Unit Rate

Providing & Installation of Pantry table of size 1.83 m x 0.75m x 1.05m (ht) made out of 19mm thk.

Commercial Board finished in Recon veneer and DU Pont Coreanof approved shade as per design. nos. 1 25000.00 25000.00

The Recon surfaces to be white Duco painted. A glass top od width 0.2m on SS pegs to be provided

above table. One (1) number Drawer pedestal with 3 drawers to be provided under the table.

15 Providing & Installation of Pantry chairs of required dimension and as per instruction of EIC nos. 6 2200.00 13200.00

16 Openable Shutter storage

The storage top 25 mm thick, shutter and side panels are made of 18mm thick and back panel is

made of 09mm thick MDF of approved shade. All the edges of storage surface shall be provided with

machine pressed imported PVC lipping glued with hot melt EVA glue free from any VOC with free

groove handle and suitable lock. All exposed area PVC edge lipping

Net Total Amount In Rs = 1478915

Net Total Amount In Rs = 1478915

Digitally signed by AMIT

INTERIOR FIT-OUTS for the Proposed Office Space of SIDBI FFICE AT RAJKOT AREA , GUJRAT

S NO DESCRIPTION Cost of DSR Items Cost of Non DSR Items

2 ELECTRICAL & LIGHTING WORKS 694,912.00 679,855.54

5 FIRE FIGHTING 173,424.00 11,160.00

8 MULTIPLYING FACTOR FOR 18 % GST 1.0633

9 Total Including multiplying factor 2,800,378.84 3,044,282.54

11 Total Amount with GST 6,040,688.00

11 Total Amount with GST 6,040,688.00

Digitally signed by AMIT

SCHEDULE OF QUANTITIES-CIVIL

S NO DSR/ MR DESCRIPTION UNIT QUANTITY RATE DSR AMOUNT NON-DSR AMOUNT

2 FALSE CEILING WORKS

Providing and fixing false ceiling at all height including providing and fixing of

frame work made of special sections, power pressed from M.S. sheets and

galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277

and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of

27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling

with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flange of

cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts &

bolts of required size and other end of angle hanger fixed with intermediate G.I.

channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to

which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered

flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall

be fixed in a direction perpendicular to G.I. intermediate channel with connecting

clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction,

12.45 including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of

2.01 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the

help of rawl plugs at 450 mm centre, with 25mm long dry wall screws @ 230 mm

interval, including fixing of gypsum board to ceiling section and perimeter

channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c,

including jointing and finishing to a flush finish of tapered and square edges of

the board with recommended jointing compound , jointing tapes , finishing with

jointing compound in 3 layers covering upto 150 mm on both sides of joint and

two coats of primer suitable for board, all as per manufacturer's specification and

also including the cost of making openings for light fittings, grills, diffusers,

cutouts made with frame of perimeter channels suitably fixed, all complete as

per drawings, specification and direction of the Engineer in Charge but excluding

the cost of painting with

12.5 mm thick tapered edge gypsum plain board conforming to IS: 2095- (Part I)

12.45.1 :2011 (Board with BIS certification marks) Sqm 30.00 1145.95 34378.50

Digitally signed by AMIT

S NO DSR/ MR DESCRIPTION UNIT QUANTITY RATE DSR AMOUNT NON-DSR AMOUNT

Providing and fixing mineral fibre false ceiling tiles at all heights of size

595X595mm of approved texture, design and pattern. The tiles should have

Humidity Resistance (RH) of 99%, Light Reflectance ? 85%, Thermal

Conductivity k = 0.052 - 0.057 w/m K, Fire Performance as per (BS 476 pt - 6

&7)in true horizontal level suspended on interlocking T-Grid of hot dipped all

round galvanized iron section of 0.33 mm thick (galvanized @120 gsm)

comprising of main T runners of 15x32 mm of length 3000 mm, cross T of size

15x32mm of length 1200 mm and secondary intermediate cross T of size 15x32

mm of length 600 mm to form grid module of size 600x600 mm suspended from

ceiling using galvanized mild steel item (galvanised@80gsm) 50 mm long 8mm

26.27 outer diameter M-6 dash fasteners, 6 mm diameter fully threaded hanger rod up

to 1000 mm length and L-shape level adjuster of size 85x25x2 mm, spaced at

1200 mm centre to centre along main ‘T’. The system should rest on periphery

walls /partitions with the help of GI perimeter wall angle of size24x24X3000 mm

made of 0.40 mm thick sheet, to be fixed to the wall with help of plastic rawl plug

at 450 mm centre to centre & 40 mm long dry wall S.S. screws. The exposed

bottom portion of all T-sections used in false ceiling support system shall be pre-

painted with polyester baked paint, for all heights. The work shall be carried out

as per specifications, drawings and as per directions of the engineer-in-charge

26.27.1 With 16 mm thick beveled tegular mineral fibre false ceiling tile (NRC 0.55 to 0.6 Sqm 150.00 2069.90 310485.00

Wall painting with premium acrylic emulsion paint of interior grade, having VOC

(Volatile Organic Compound ) content less than 50 grams/ litre of approved

13.83 brand and manufacture, including applying additional coats wherever required to

achieve even shade and colour.

3 WALL FINISHES WORKS

Providing wood work in frames of doors, windows, clerestory windows and other

frames, wrought framed and fixed in position with hold fast lugs or with dash

3.1 9.1 fasteners of required dia & length (hold fast lugs or dash fastener shall be paid

for separately).

Second class teak wood

Extra for providing lipping with 2nd class teak wood battens 25 mm minimum

depth on all edges of flush door shutters (over all area of door shutter to be

Providing and fixing 12mm thick frameless toughened glass door shutter of

approved brand and manufacture, including providing and fixing top & bottom

pivot, other fittings & double acting hydraulic floor spring type fixing arrangement

3.5 21.18 and making necessary holes etc. for fixing required door fittings, all complete as Sqm 14.00 4540.70 63569.80

per direction of Engineer-in-charge (Door handleto be paid separately).

Digitally signed by AMIT

S NO DSR/ MR DESCRIPTION UNIT QUANTITY RATE DSR AMOUNT NON-DSR AMOUNT

Providing & Fixing Frosted Translucent, cast PVC, self-adhesive vinyl, special

CRYSTAL-effect film to reproduce Sand-blasting effect on glass with customised

designs, thickness of 2 mil (0.05mm) without adhesive & 3mil (0.8)with adhesive

having minimum tensile strength of 3.5 pound/inch at 73 F(0.6 kg/cm at 23 C).

Adhesion after 24hrs of installation should be 4 pounds/inch (0.7 kg/cm) on

3.7 MR Acrylic, Glass Polycarbonate: MCS warranty of 3yrs (if exposed to direct Sqm 12.00 800.00 9600.00

sunlight) to 15yrs (indoors) . Contractors payment wouldn't be released until &

unless he/she produces orginal warranty certificate from the manufacturer.

Providing and fixing partition upto ceiling height consisting of G.I. frame and

required board, including providing and fixing of frame work made of special

section power pressed/ roll form G.I. sheet with zinc coating of 120

gms/sqm(both side inclusive), consisting of floor and ceiling channel 50mm wide

having equal flanges of 32 mm and 0.50 mm thick, fixed to the floor and ceiling

at the spacing of 610 mm centre to centre with dash fastener of 12.5 mm dia

meter 50 mm length or suitable anchor fastener or metal screws with nylon plugs

and the studs 48mm wide having one flange of 34 mm and other flange 36 mm

and 0.50 mm thick fixed vertically within flanges of floor and ceiling channel and

placed at a spacing of 610 mm centre to centre by 6 mm dia bolts and nuts,

including fixing of studs along both ends of partition fixed flush to wall with

suitable anchor fastener or metal screws with nylon plugs at spacing of 450mm

centre to centre, and fixing of boards to both side of frame work by 25mm long

dry wall screws on studs, floor and ceiling channels at the spacing of 300mm

centre to centre. The boards are to be fixed to the frame work with joints

staggered to avoid through cracks, M.S. fixing channel of 99mm width (0.9mm

thick having two flanges of 9.5mm each) to be provided at the horizontal joints of

two boards, fixed to the studs using metal to metal flat head screws, including

jointing and finishing to a flush finish with recommended jointing compound,

jointing tape, angle beads at corners (25mmx 25mmx0.5 mm), joint finisher and

two coats of primer suitable for board as per manufacturer's specification and

direction of engineer in charge all complete.

75mm overall thickness partition with 12.5mm thick double skin fire rated Glass

Reinforced Gypsum (GRG) plaster board conforming to IS: 2095: part 3 (Board

with BIS certification marks)

Digitally signed by AMIT

S NO DSR/ MR DESCRIPTION UNIT QUANTITY RATE DSR AMOUNT NON-DSR AMOUNT

Providing & supplying of Window Blinds as per the approved sample in required

shade and style consisting, of Roller Blindscomprising of optima screen Fabric

comprising of 22% polyester, 78% PVC, Fabric weight 460-480G weight per sq

m, Thickness 0.67 mm, Yarn count 18-19/cm, having fire resistance standard –

NFPA 701-89 small testing ISO-5659-2 .The tear resistance should be

complying to ISO4674 & breaking resistance – ISO 5081. The DRIVE UNIT shall

be of clutch for quick,easy and safe installation,moulded plastic with steel spring

support and inserted into the tube end. It shall be driven by a ball chain pulley

with ball chain and can be positioned at right side or left hand side of the Shade.

The Shade when lowering or raising, shall be automatically locked in position

upon release of the ball chain by means of a built in friction lock.Universal clutch

for left and right hand operation.Chain Gear Ratio of 1.75:1.The END PLUG

shall be molded of plastic witha steel location pin. The plug shall be inserted into

the tube end. (Opposite to the Drive Unit) for ease of installation. TheSUPPORT

BRACKETS shall be of coated steel & provided with covers and used in right

hand or left hand positions differentiated by the acceptance of the of the

rectangular drive unit support or the round idler plug pin.Can beinstalled (a) On

Face (b) Ceiling Mount (c) On Frame (d) in Recess. The Bracket should be

protruding outside maximum of80mm.The ROLLER TUBE shall be of extruded

aluminum with 37mm internal diameter & skin thickness of 1mm and shall

incorporate a key way integral with the tube to accommodate the spline. The

BOTTOM RAIL shall be a Flat Bottom made up of powder coated steel. The

BALLCHAIN shall be 2mm diameter cord with 4.5mm diameter acetal balls

moulded co-axially to it on 6mm pitch to form an endless ballchain.It is used for

raising or lowering action of the shades.

Providing and applying plaster of paris putty of 2 mm thickness over plastered

3.28 13.26 surface to prepare the surface even and smooth complete. Sqm 75.00 214.30 16072.50

Providing and fixing plain lining with necessary screws/ nuts & bolts/ nails,

9.140 including a coat of approved primer on one face, and fixed on wooden/ steel

3.29 frame work, complete as per direction of Engineer-in-Charge

9.140.1 12mm thick commercial ply conforming to IS : 1328 BWR type Sqm 50.00 1084.60 54230.00

Providing and fixing plain lining with necessary screws/ nuts & bolts/ nails,

including a coat of approved primer on one face, and fixed on wooden/ steel

3.30 MR frame work, complete as per direction of Engineer-in-Charge

4mm thick MDF Board Sqm 66.01 273.00 18020.00

Providing & Fixing decorative high pressure laminated sheet of plain / wood

grain in gloss / matt/ suede finish with high density protective surface layer and

3.32 9.127.2 reverse side of adhesive bonding quality conforming to IS : 2046 Type S, Sqm 60.00 764.00 45840.00

including cost of adhesive of approved quality- 1.0 mm Thick

Digitally signed by AMIT

S NO DSR/ MR DESCRIPTION UNIT QUANTITY RATE DSR AMOUNT NON-DSR AMOUNT

Providing and fixing 4mm thick coir veneer board, ISI marked IS : 14842, plain

3.34 8.29 lining with necessary screws, priming coat on unexposed surface etc., complete. SQM 10.00 1549.45 15494.50

Polishing in high gloss/matt finish melamine clear polish on wood work in

required color/wooden shade texture with following process in the sequence

as detailed below:

1. The surface to be polished is rubbed with sand paper 80/120 no. and then

with sand paper of 160/180 nos.

2. Applying two coats of sealer with spray gun and allowing sufficient drying

time for 1st coat and 2nd coat is allowed to dry for 8 to 12 hrs.

3. On drying of sealer coat, wet rubbing with emery cloth of finer grading

with ample water to remove excess sealer layer and make the surface further

smooth after this wet rubbing, then surface is applied with special grade

melamine fillers to fill all the small and big holes/grooves etc. Filler coat to

be allowed to dry for 4 to 6 hrs on which again a light wet rubbing is done

this surface is further allowed to dry for 12 hrs.

4. On this, 1st coat of melamine polish is applied with spray gun using

melamine clear polish and melamine thinner in required proportion. This

1st coat is allowed to dry for 24 hrs then this dry surface is again fine wet

rubbed smooth, which is further allowed to dry for 12 hrs. The final

melamine polish is applied with compressor pressure spray gun using

melamine clear polish and melamine thinner mixed in required proportion

complete as per direction of Engineer-in-Charge. (Final coat to be done in

1 or 2 layers without gap of time.)

POP PUNNING (12mm-15mm) : Providing and fixing Average 12mm to

3.37 MR 15mm thick POP Punning over cement plaster in line & plumb finished SQM 35 385 13475

smooth to receive paint. (Internal surfaces of walls).

3.41 9.81 Providing and fixing bright finished brass handles with screws etc.

3.43 MR 35MM THICK LAMINATED SLIDING DOOR - 35mm thick flush Doors finished

using 1mm Thick Highland Pine Laminate on both sides panel of size upto

2400mm x 1050mm complete with Hardware including soft close sliding rail,

Lock with inbuilt key, Handle etc. including cost of teak lipping all around with Nos 1.00 27,525.00 27,525.00

melamine/ duco finish. The item to include installation of all kinds of latches as

per the requirement.

NS Providing and fixing of Glass door fittings i.e. Lock, Floor spring, Handle

10 complete in all respect. 1.00 37300 37300.00

4 MISCELLANEOUS WORKS

Providing and fixing sinages of SS-304 of 16"x 22" or required size asper the

4.01 direction of Engineer In charge Nos 6 2250.00 13500.00

Digitally signed by AMIT

S NO DSR/ MR DESCRIPTION UNIT QUANTITY RATE DSR AMOUNT NON-DSR AMOUNT

5 DISMANTLING WORKS

Dismantling cement asbestos or other hard board ceiling or partition walls

5.01 15.41 including stacking of serviceable materials and disposal of unserviceable Sqm 0 46.50 0.00

materials within 50 metres lead.

Dismantling tile work in floors and roofs laid in cement mortar including stacking

5.02 15.23 material within 50 metres lead.

For thickness of tiles 10 mm to 25 mm

GRAND TOTAL 778819.68 315840.00

GRAND TOTAL 778819.68 315840.00

Digitally signed by AMIT

SCHEDULE OF QUANTITIES - ELECTRICAL WORKS

DSR NO DESCRIPTION TOTAL AMOUNT TOTAL AMOUNT

DSR NO DESCRIPTION TOTAL AMOUNT TOTAL AMOUNT

S NO UNIT QUANTITY RATE

2022 DSR (INR) NON-DSR (INR)

A POINT WIRING

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC

insulated copper conductor single core cable in surface / recessed medium class PVC

1 1.10 conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5

sq.mm. FRLS PVC insulated copper conductor single core cable etc as required.

Wiring for group controlled (looped) light point/ fan point/call bell point (without independent

switch etc.) with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in

2 1.55 surface / recessed PVC conduit, and earthing the point with 1.5 sq.mm. FRLS PVC insulated

copper conductor single core cable etc as required.

Supplying and fixing following modular switch/ socket on the existing modular plate & switch

3 1.24 box including connections but excluding modular plate etc. as required.

1.24.4 3 pin 5/6 amp socket outlet Each 56 122.00 6832.00

1.24.5 6 pin 15/16 amp socket outlet Each 20 197.00 3940.00

Supplying and fixing modular blanking plate on the existing modular plate & switch box

4 1.26 excluding modular plate as required. Each 10 40.00 400.00

Supplying and fixing following size/module, GI box along with Modular base & cover plate on

5 1.27 existing modular metal boxes etc. as required.

B SUBMAIN AND CONTROL WIRING

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FR PVC

1 1.14 insulated copper conductor, single core cable in surface/ recessed steel conduit as required

1.14.1 2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire Metre 100 233.00 23300.00

1.14.3 2 X 4 sq. mm + 1 X 4 sq. mm earth wire Metre 250 334.00 83500.00

1.14.4 2 X 6 sq. mm + 1 X 6 sq. mm earth wire Metre 40 439.00 17560.00

1.14.10 4 X 10 sq. mm + 2 X 6 sq. mm earth wire Metre 40 1005.00 40200.00

1.14.11 4 X 16 sq. mm + 2 X 6 sq. mm earth wire Metre 20 1365.00 27300.00

Supplying and fixing single pole blanking plate in the existing MCB DB complete etc. as

Digitally signed by AMIT

DSR NO DESCRIPTION TOTAL AMOUNT TOTAL AMOUNT

DSR NO DESCRIPTION TOTAL AMOUNT TOTAL AMOUNT

S NO UNIT QUANTITY RATE

2022 DSR (INR) NON-DSR (INR)

Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve, miniature circuit

breaker suitable for inductive load of following poles in the existing MCB DB complete with

1 2.10 connections, testing and commissioning etc. as required.

2.10.15 TRIPLE POLE & NEUTRAL Each 4 1228.00 4912.00

Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB

distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral

3 2.4 bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as

required. (But without MCB/RCCB/Isolator)

E PROVISIONS FOR VOICE, DATA, SECURITY & TV SYSTEMS

Supply, installation, testing & Commissioning for Juntion box having power sockets, LAN

1 MR port, USB port, HDMI enabled etc. as per requirement Set 4 3971.00 15884.00

Supplying and fixing following modular switch / socket on the existing modular plate & switch

2 1.24 box including connections but excluding modular plate etc. as required.

1.24.7 TV socket outlet Set 6 148.00 888.00

Supplying and drawing following pair, 0.5 sq.mm FR PVC insulated copper conductor,

MR unarmoured telephone cable in the existing surface / recessed steel / PVC conduit as

Supply, Installation, Testing and Commisioning of Galavanized Iron (GI) Raceways along

MR with required suitable number of GI couplers for joining raceways and fixing GI brackets and

all accessories complete in all respect as per the directions of engineer in charge

MR Supply, Installation, Testing and Commisioning of Junction boxes for direct access to cables

4 (b) at the225

225x intersection of raceways supplied completely with base and cover plates, height Each 12 960.00 11520.00

Supplying and drawing co-axial TV cable RG-6 grade, 0.7 mm solid copper conductor PE

5 1.19 insulated, shielded with fine tinned copper braid and protected with PVC sheath in the Set 100 47.00 4700.00

exisitng surface/recessed steel/ PVC conduit as required

Supplying and fixing of following sizes medium class PVC conduit aong with accessories in

1.21 surface/ recess including cutting the wall and making good the same incase of recessed

6 conduit as required

Digitally signed by AMIT

DSR NO DESCRIPTION TOTAL AMOUNT TOTAL AMOUNT

DSR NO DESCRIPTION TOTAL AMOUNT TOTAL AMOUNT

S NO UNIT QUANTITY RATE

2022 DSR (INR) NON-DSR (INR)

Supplying and Installation of following size perforated of painting with powder coating M.S.

cable trays of perforation of not more than 17.5% in convinient sections, joined with

4.1 connectors suspended from the cieleing with MS suspenders including bolts and nuts

painting suspenders etc as required

4.1.6 450 mm width x 50 mm depth x 2 mm thickness Metre 60 1137.00 68220.00

8 5.16 Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing as required. Metre 100 70.00 7000.00

Digitally signed by AMIT

DSR NO DESCRIPTION TOTAL AMOUNT TOTAL AMOUNT

DSR NO DESCRIPTION TOTAL AMOUNT TOTAL AMOUNT

S NO UNIT QUANTITY RATE

2022 DSR (INR) NON-DSR (INR)

Supply, Installation, Testing and Commissiong of desired capacity,True Online Double

Conversion UPS 3Phase Input - 3Phase Output in Parallel Redundant N+1 Configuration

IGBT Based Rectifier and IGBT Based Inverter Batteries:12 V, SMF for 15 minutes backup

1 MR complete as per the requirement of site. KVA 10 25415.50 254155.00

Supply, Installation, Testing and Commissioing of Recessed round downlightwith 15 W,

minimum Luminous flux of luminaire 1500 lm, 100 LM/W system efficacy, Colour

2 MR temperature of 4000 K, Neutral white, CRI > 80 as per the directions of EIC Each 40 1065.00 42,600.00

Supply of 2"X2" Square recessed LED downlight fixture suitable for 36 Watt LED Complete

3 MR with suitable Electronic Ballast, Lamp etc. as required. Each 30 3240.00 97,200.00

Supplying, installation, testing & commissioning of intelligent analog addressable

4 MR photothermal detector complete with mounting base complete as required. No 16 750.00 12000.00

Supplying, installation, testing & commissioning of response indicator on surface/recessed

5 MR MS Box having two LED, metallic cover complete with all connections etc as required. No 6 200.00 1200.00

Supplying, installation, testing & commissioning of intelligent addressable thermal detector

6 MR with rate of rise cum fixed tempreature thermistor complete with base as required. No 2 700.00 1400.00

Supplying, installation, testing & commissioning of addressable fire control module complete

7 MR as required No 1 2000.00 2000.00

Supplying, installation, testing & commissioning of addressable phone control module

complete as required.

Supplying, installation, testing & commissioning of addressable horn cum strobe complete as

Supplying, installation, testing & commissioning of addressable manual call point complete

10 MR as required. No 1 350.00 350.00

Supplying, installation, testing & commissioning of 6 zone, voice alarm controller with USB,

MP3 player (including 6 zone button paging station) with seamless integration facility with

11 MR main fire alarm panel for voice evacuation complete as required No 1 15000.00 15000.00

Supplying, installation, testing & commissioning of 1.5/3/6W ceiling speaker complete as

Supplying, installation, testing & commissioning of digital audio amplifier 150 Watt, 25V rms

operating at 240 Volt AC Supply complete as required.

Digitally signed by AMIT

DSR NO DESCRIPTION TOTAL AMOUNT TOTAL AMOUNT

DSR NO DESCRIPTION TOTAL AMOUNT TOTAL AMOUNT

S NO UNIT QUANTITY RATE

2022 DSR (INR) NON-DSR (INR)

Supplying & laying of 2x1.5 sqmm fire alarm armoured cable, 600/1000V rated with annealed

copper conductor having XLPE insulation, steel wire armouring & FRLS outer sheath

complete as required

Supplying and drawing of cable Fire Retardant PVC insulated copper conductor cable in the

existing surface / recessed steel conduit of following pairs, cores and size including

connections and interconnections etc. as required.

speaker cable Two pair, 2-core, 1.5 sqmm

Supplying & Fixing of battery operated illiminated "EXIT" signage, with 2hrs power Battery

17 M.R. backup complete as required. NOS 4 2132.00 8528.00

Supplying, installation, testing & commissioning of Voice command keypad of required zone,

18 MR with microphone assembly complete as required. NOS 1 48000.00 48000.00

Supplying, installation, testing & commissioning of FIRE PANEL upto 4 zone complete as

19 MR required. Nos 1 8000.00 8000.00

Total of Electrical items 1374767.54

Digitally signed by AMIT

S NO DSR/MR Description UOM Qty Rate DSR Amount Non-DSR Amount

A. UTP Components for Data & voice

Supply, Fixing & Laying of CAT 6 UTP cable 23 AWG solid copper conductors for

1. (DSR Connectivity of Hub room to End Point.High Speed Gigabit Ethernet U/UTP, 250

1 MHz, Class E, 23 AWG, Unshielded LSZH Cable, C6 METRE 800 57.00 45600.00

Supply, Installation, Testing and Comissioning of I/O port for CAT6 cable termination

at Work Station end. Keystone Unshielded Outlet, 180DG C6, including faceplate,

2 MR ferrules, numbering etc. complete in all respect at user side. Nos. 32 825.00 26400.00

Supply, Installation, Testing and Comissioning of 24 port Loaded Jack Panel for

CAT6 cable termination at rack end. Data Active

3 3 (1.24.6) Telephone socket outlet Nos. 27 148.00 3996.00

5 MR 2 Metre patch cord CAT6 Nos. 27 580.00 15660.00

Supply , Installtion , Testing and Comissioning of double Port British Style

Shuttered Face Plate white for I/O fixing at user side

2 MR 24 Port managed network access Switch Nos. 2 20000.00 40000.00

SITC of SSD Hard Disk Drive 1TB, 24/7 surveillance category Only complete etc as

required.etc.all complete.

SITC of 16U, Equipment Rack, with Front & Side doors, 4 No Fan Assembly, on Top

of the Rack, 4 Caster wheels, 2 no Shelfs to mount the equipments which are not

rack mounted, 8X2, 5/6 Amp. Power Distribution Unit, Cable Manager & Sufficient

Rack hardwares etc all complete

SITC of 24U, Equipment Rack, with Front & Side doors, 4 No Fan Assembly, on Top

of the Rack, 4 Caster wheels, 2 no Shelfs to mount the equipments which are not

rack mounted, 8X2, 5/6 Amp. Power Distribution Unit, Cable Manager & Sufficient

Rack hardwares etc all complete

SITC of 5 Meter Premium High Speed HDMI 2.0b Flexy Cable, Bandwidth up to

9 MR 18Gbps, Up to 4096x2160@60Hz at RGB 4:4:4 video resolution, High Dynamic No's 3 5000.00 15000.00

Range (HDR10), Dolby Vision and Hybrid log–gamma (HLG) video etc all complete

GRAND TOTAL (A+B+C+D+E) 49596.00 162372.00

GRAND TOTAL (A+B+C+D+E) 49596.00 162372.00

Total 211968.00

Digitally signed by AMIT

SCHEDULE OF QUANTITIES - HVAC WORKS

S NO DESCRIPTION UNIT QUANTITY RATE TOTAL AMOUNT TOTAL AMOUNT

S NO DESCRIPTION UNIT QUANTITY RATE TOTAL AMOUNT TOTAL AMOUNT

DSR (INR) NON-DSR (INR)

Supply Installation, Testing & Commissioning of modular type Variable

Refrigerant Flow/Variable Refrigerant Volume air cooled Outdoor units

suitable for cooling and heating, having all hermetically sealed inverter type

Scroll Compressor(s), minimum two compressors for above 14 HP modules,

microprocessor based Controller, top discharge type condensing unit(s), with

R 410 A Refrigerant, vibration isolators, with suitable foundation etc.

1.0 1 complete as required. The unit shall deliver the rated capacity at AHRI Per HP 24.0 16415.00 393960.00

Conditions and work even at 50°C ambient temperature without tripping. The

unit shall be suitable to work on 400V +/- 10%, 3 Phase, 50Hz AC power

supply. The unit shall be filled with first charge of the refrigerant and ready for

use as required. The COP at AHRI conditions shall not be less than 3.1 and

IEER not less than 6.5

Supply, installation, testing and commissioning of following minimum capacity

4-way flow VRV/VRF Cassette Type Indoor ceiling mounted unit equipped

with synthetic washable media pre-filter, fan section with low noise

fan/dynamically balanced blower, multispeed motor, coil section with DX

Copper coil, electronic expansion valve, outer cabinet, drain pump, grill,

2.0 2 necessary supports, vibration isolation, cord less remote control etc., suitable

for operation on single phase 230 V ± 10%, 50Hz AC supply, complete, as

required. The unit shall have automatic force shut down provision in case of

fire on receiving signal from BMS System. The cooling capacity of indoor unit

will be at air inlet conditions of 27 Degree C DB and 19 Degree C WB

Supply, installation, testing and commissioning of following

minimum capacity VRV/VRF High wall type Indoor unit equipped

with washable synthetic media pre-filter, fan section with low noise

fan/dynamically balanced blower, multispeed motor, coil section

with DX copper coil, electronic expansion valve, outer cabinet, cord

less remote control, drain pan, necessary accessories etc., suitable

3.0 3 for operation on 230 V ± 10%, 50 Hz, single phase AC supply,

complete as required. The unit shall have automatic force shut down

provision in case of fire on receiving signal from BMS System. The

cooling capacity of indoor unit will be at air inlet conditions of 27

Degree C DB and 19 Degree C WB temperature.

Digitally signed by AMIT

4 5 Refrigerant Piping

Supply, Installation, testing and commissioning including vaccumiazation and

Nitrogen testing of following nominal sizes of soft/hard drawn copper

refrigerant piping for VRV/VRF system, complete with fittings, with suitable

adjustable ring type hanger supports, jointing/brazing including accessories,

insulated with XPLE Class-O tubular insulation/with Class-O closed cell

5 elastometric nitrile rubber tubular sleeves sections of specified thickness as

given below for Suction and Liquid lines, all accessories as per specifications

etc. as required :

a 5.1 6.4 mm dia (OD) (Soft drawn) with tube thickness 1.2 mm with 19 mm thick Metre 84 245 20580

b 5.2 insulation

9.5 mm dia (OD) (Soft drawn) with tube thickness 1.2 mm with 19 mm thick Metre 168 331 55608

c 5.3 insulation

12.7 mm dia (OD) (Soft drawn) with tube thickness 1.2 mm with 19 mm thick Metre 84 466 39144

d 5.4 insulation

15.86 mm dia (OD) (Soft drawn) with tube thickness 1.2 mm with 19 mm thick Metre 42 588 24696

e 5.5 insulation

19 mm dia (OD) (Hard drawn) with tube thickness 1.2 mm with 19 mm thick Metre 42 707 29694

Lifting, Shifting, Supply, Installation, Testing & Commissioning of

Interconnecting "Y" & "T" Joints i.e. Refnet Joints/ Header with Insulation for

Providing & laying of uPVC drain Pipe 25 mm to drain out the water as per

the site requirement

Supplying and drawing following sizes of FRLS PVC insulated

9.0 1.17 copper conductor, single core cable in the existing surface/

recessed steel/ PVC conduit as required.

Supply, installation, balancing and commissioning of factory fabricated GSS

sheet metal rectangular/round ducting complete with neoprene rubber

16.12.1 gaskets, elbows, splitter dampers, vanes, hangers, supports etc. as per

approved drawings and specifications of following sheet thickness complete

a 16.12.1.1 Thickness 0.63 mm sheet SQM 0.0 1080.00 0.00

b 16.12.1.2 Thickness 0.80 mm sheet SQM 0.0 1263.00 0.00

c 16.12.1.3 Thickness 1.00 mm sheet SQM 0.0 1381.00 0.00

d 16.12.1.4 Thickness 1.25 mm sheet SQM 0.0 1836.00 0.00

Diffusers & Grills

Supplying & fixing of powder coated extruded aluminium Supply Air Grills with

aluminium volume control dampers as per specifications.

Digitally signed by AMIT

Supplying & fixing of powder coated extruded aluminium Return Air Grills with

louvers but without volume control dampers complete as required

Supplying, fixing testing commissioning of supply air diffusers of powder

13.0 16.17 coated aluminium with aluminium volume control dampers with anti smudge SQM 0.0 12184.00 0.00

ring & removable core.

Supplying, fixing testing commissioning of Return air diffusers of powder

coated aluminium without volume control dampers with anti smudge ring &

removable core.

Supplying and fixing of following thickness duly laminated aluminum foil of

mat finish closed cell Nitrile rubber (Class "O") insulation on existing duct

15.0 16.23 after applying suitable adhesive for Nitrile rubber. The joints shall be sealed

with 50 mm wide and 3 mm thick self adhesive nitrile rubber tape insulation

complete as per specifications and as required.

Supplying, laying/ fixing, testing and commissioning of following nominal sizes

of chilled water piping inside the building (with necessary clamps, vibration

isolators and fittings but excluding valves, strainers, gauges etc.) duly

insulated with following closed cell elastometric nitrile rubber of minimum 45

Kg / cu m density, thermal conductivity 0.037 W/MK or better at 20 deg mean

temperature class 'O' insulation applied by suitable adhesive complete

including repairing of damage to building etc. as per specifications and as

required complete in all respect. Note:- The Pipes of sizes 150mm & below

shall be M.S. 'C' class as per IS : 1239 and pipes size above 150mm shall be

welded black steel pipe heavy class as per IS: 3589, from minimum 6.35mm

thick M.S. Sheet for pipes upto 350 mm dia. and from minimum 7mm thick

MS sheet for pipes of 400 mm dia and above.

16.2.11 50mm dia(32 mm thick insulation) Metre 0.0 1553.00 0.00

16.2.12 40mm dia. (32 mm thick insulation) Metre 0.0 1257.00 0.00

16.2.13 32 mm dia(19 mm thick insulation) Metre 0.0 1047.00 0.00

Supplying, Fixing,testing and commissioning of fire dampers in supply air

duct/main branch and return air path as and where required of required sizes

i/c control wiring,the damper shall be motorized and spring return so as to

close the damper in the event of power failure automatically and open the

same in case of power being restored. The spring return action shall be

16.0 16.20 inbuilt mechanism and not externally mounted. The damper shall also be

closed in the event of fire signal complete as required and as per

specifications.

(Fire damper shall ve suitable for 120 minutes fore rating as per NBC norms)

Digitally signed by AMIT

17.0 VOLUME CONTROL DAMPER

Supply, installation, testing and commissioning of GI volume control duct

a 16.13 damper complete with neoprene rubber gaskets, nuts, bolts, screws linkages, SQM 0.0 7046.00 0.00

flanges etc, as per specifications

TOTAL HVAC WORKS 936916.00 159200.00

Digitally signed by AMIT

Fire fighting and piping work

2022/ DESCRIPTION OF ITEM UNIT QTY RATES

NO. AMOUNT(RS.) Amount

7 1 Providing, laying, testing & commissioning of 'C' class heavy

duty MS pipe conforming to IS 3589/IS 1239 including

Welding, fittings like elbows, tees, flanges, tapers, nuts bolts,

gaskets etc. and fixing the pipe on the wall/ceiling with

suitable clamp/support frame and painting with two or more

coats of synthetic enamel paint of required shade complete

18.21 2 Providing, fixing, testing & commissioning of 15mm dia

quartzoid bulb type sprinklers of rating 68 degree centigrade

with required accessories : - -

21.1 Pendent Sprinkler/Upright Sprinkler Each 30 522.00 15,660.00

16.11.1 3 BUTTERFLY VALVE (MANUAL) with C I body SS disc nitrile

sheet & O - ring & PN 16 pressure rating as specified.

18.25 4 Supplying, installation, testing & commissioning of sprinkler

flexible pipe (UL Listed) of stainless steel complete with 15

NPT on reducer thread with maximum working pressure of

175 PSI test pressure of 875 PSI (Burst) with branch line

(Inlet) 25mm NPT male thread to sprinkler head (Outlet)

15mm NPT female thread with reducer, nipple, 2 side

brackets, center bracket, stockbar of following sizes

complete as required

5 Providing and fixing ISI Marked of approved make Fire

Extinguishers complete with all accessories as per

manufacturer's specifications.

MR a ABC dry powder stored pressure type 2 kg capacity

Digitally signed by AMIT

2022/ DESCRIPTION OF ITEM UNIT QTY RATES

NO. AMOUNT(RS.) Amount

MR b ABC dry powder stored pressure type 1 kg capacity

GRAND TOTAL 184,584.00

GRAND TOTAL 184,584.00

Digitally signed by AMIT

Sr.no Specification Qty Unit Rate

3 seater Dimension : (L)1650mm X (D)750mm X (H)710mm 2 nos 46800 93,600

2 seater Dimension(L)1390mm X (D)750mm X (H)710mm 0 nos 37800 0

Supplying, and placing in position of sofa with premium Leatherette upholstery adds class to

the soft cushioned backrest and seating. Material & subtype:Premium Leatherette, Colour &

Colour Family:as per requirement, Seating Height:16.14" ,Legs:Stainless Steel, Finish:Matte,

Size:Compact, Style:Modern, Texture:Two Tone. steam beech solid wood have used for

framing construction of sofa .The seat cushion is made of multi layered foam of density 32-35

kg/m3. The seating cushion have 2.75 & 1.75 inches of elastic webbing. The thread used is

nylon bonded to provide lasting stitch strength . The backrest has a foam of 28kg/m3 with

polyster polyfill outer layer of 200 gsm.

2 DGM High Back Chair 1 nos 14500 14,500

Supplying and placing in position of 360 degrees revolving high back chair . The chair of Size

:-(W)590mm X (D)505mm X (H)1180mm - 1280mm. The chair shall be ergonomically design

contour lumbar back design made of 12mm thick BWR plywood (IS Grade - 303 for seat and

back) upholstered with leatheritte and cut foam. The chrome plated loop armrest with padded

upholstery is provided for extra comfort. The chair shall be provided with pneumatic height

adjustment which shall have stroke of 10.0 +/- 0.3 cm . Five star chrome base with nylon

castors . Chair seat has foam of density 30-35 (+/-2kg /m3) Dimensions The backrest has a

foam of 28kg/m3.

3 DGM Visitor Back Chair 3 nos 7000 21,000

Digitally signed by AMIT

Sr.no Specification Qty Unit Rate

Supplying and placing in position of medium back cantilever chair of size: (W)610mm X

(D)505mm X (H)990mm.A contemporary design with an all black finish, . Material &

subtype:Premium Leatherette, Colour & Colour Family:Black, Dimension(W)610mm X

(D)505mm X (H)990mm, Back Type:Cantilever, Base:Cantilever Frame, Base

Type:Cantilever, Maximum Seating Height:19".The Seat & back are made up of 12mm thk hot

pressed plywood upholstered with PVC with polyurethane foam, chair seat has foam of

density 32-35 kg/m3. The backrest has a foam of 28kg/m3.

4 Conference Medium Back Chair 1 nos 8500 8,500

Supplying and placing in position of 360 degrees revolving medium back chair . The Craze

chair of Size :-(W)590mm X (D)505mm X (H)1005mm - 1115mm. The chair shall be

ergonomically design contour lumbar back design made of 12mm thick BWR plywood (IS

Grade - 303 for seat and back) upholstered with leatheritte and cut foam. The chair shall be

provided with pneumatic height adjustment which shall have stroke of 10.0 +/- 0.3 cm . Five

star chrome base with nylon castors . Chair seat has foam of density 30-35 (+/-2kg /m3) The

backrest has a foam of 28kg/m3.

5 AGM High Back Chair 3 nos 13500 40,500

Digitally signed by AMIT

Sr.no Specification Qty Unit Rate

Supplying and placing in position of 360 degrees revolving high back chair of size: 660mm (L)

x 490mm(D) x 1315mm(H). The seat cushion to be upholstered on 10-12mm thick water proof

plywood and moulded foam. The seat to be made with 12 mm thick hot pressed BWR

plywood (IS grade - 303) upholsetered with Polyurethane foam and mesh fabric over it. The

chair shall be provided with self tension single locking mechanism and pneumatic height

adjustment which shall have stroke of 10.0 +/- 0.3 cm .The black .The pneumatic height

adjustment shall have adjustment stroke of 100 mm and shall be operated at 30kgs extension

force.The Seat & back are made up of 12mm thk hot pressed plywood upholstered with PVC

with polyurethane foam, chair seat has foam of density 32-35 kg/m3. The backrest has a

foam of 28kg/m3. adjustable arm rest and head rest

6 Medium Back Chair 32 nos 7500 240,000

Supplying and placing in position of 360 degrees revolving medium back chair. The

breathable mesh back chair with cushioned fabric seat shall be ergonomically design with

adjustable lumbar back support . The chair shall be provisioned with adjustable armrest (Up-

Down) with PP padding and Adjustable Headrest(Can Adjust Movement). The chair shall be

provided with self tension single locking mechanism and pneumatic height adjustment which

shall have stroke of 10.0 +/- 0.3 cm .The pneumatic height adjustment shall have adjustment

stroke of 100 mm and shall be operated at 30kgs extension force.The Seat are made up of

12mm thk hot pressed plywood upholstered with PVC with polyurethane foam, chair seat has

foam of density 32-35 kg/m3.

7 AGM Visitor Chair & conference room side chairs 12 nos 7000 84,000

Digitally signed by AMIT

Sr.no Specification Qty Unit Rate

Supplying and placing in position of Fix cantilever chair,the chair made of full mesh in black

colour.. use of ply: 12 mm thick hot pressed bwr plywood (is grade - 303 for seat).Seat: 40 ± 2

mm thick polyurethane foam with density 32 (±3) kg per cu meter for best quality cushioning in

seat, back: frame of design shall be curved made of two pieces injection moulded frame cover

with mesh .backrest support adjustable lumbar support. Only seat size is 500mm(l)x

500mm(d)x 470mm(h) & the back size is 465mm(l)x 550mm(h) ,Seat max height is @ 470mm

.Fixed cantilever chair .base: chrome plated tubular frame of cantilever type..The Seat are

made up of 12mm thk hot pressed plywood upholstered with PVC with polyurethane foam,

chair seat has foam of density 32-35 kg/m3.

8 Modular Workstation

Dimesnion: 1500mm(L) x 1500mm(L) x 600mm(D) x 1200mm(H) 16 nos 29925 478,800

Modular Workstation With Side Top with 3 drawer Pedestal Size 1500W x 600D x

750/1200H.Partition NI-60mm Partition Ht. 1200mm, Double Raceway systems Skirting label

and below the table top . lower tile both side laminated and upper tile inside side fabric, White

Board and white Tinted Glass . With Side Top Size 900W x 400D x 750H 25mm thick Gabel

end 18mm thick MDF board., and 3Drawer top supported Pedestal unit Size 400W x 400D x

725H made in 18mm thick..Complete Made in MDF Board.. Laminate 1-Frosty White,

Laminate2 For drawer Facia-Honkong Blue, Fabric-F 161 Dolphin Blue, Powder Coating-

Munshel Gray. and White Tinted Glass

9 Linear Workstation

Dimension: 1200mm(L) X 600mm(D) x 1050mm(H) 3 nos 21735 65,205

Digitally signed by AMIT

Sr.no Specification Qty Unit Rate

Supplying, and placing in position of linear workstation as per Image.The worktop made out of

25mm thk. Prelam Particle board with 2 mm thk PVC edge banding.The Table top supported

on Mild Steel of size 50mm x50mm Slanted Leg and 50mm x 25mm Horizontal connectors

with Powder coting of 50 Micron.Middle Leg :- 0.8 mm thk Metal panel fixed on both side of

the "T" leg for Vertical wire carrying purpose.(Sharing Workstation). 0.8 mm thk Single/Double

metal powder coated raceway with Powder coting of 50 Micron below top for wiring.Vertical

wire carrying pole with powder coating 50 micron below top for wiring( Non- sharing

workstation ). Also having a provision of ms perfoated sheet hanging modesty. provision of

glass divider rest on the "D" brackets on the table top between opposite seatings. All working

or non working edges shall be provided with machine pressed 2mm thick PVC edging using

special hot melt glue at hot temperature. Provision of pullout PVC keyboard tray and CPU

trolley for each seating. Also a provision of Pedestal Unit (size:- L-400mm x D-450mm x H-

600mm) with a combination of 2 drawer & one filing drawer. The pedestal storage unit shall be

made of 18 mm thick prelaminated Particle board with provision of handles & Locking

Main Table Dimension (L) 1650mm x (D) 750mm x (H) 750mm 120000

Side Runer Dimension (L) 1050mm X (D) 450mm X (H) 750mm

Supplying, and placing in position of main Table as per Image/ drawing.The Table top are

made out of 25mm thk prelam particle board with 2mm thk pvc edge banding & side panel &

modesty panel made up of 18mm thick pre-laminated particle board .The working edges shall

be provided with machine pressed 2mm thick PVC edging using special hot melt glue at hot

temperature. The table have a provision of free standing Side Storage of size 1050mm L x

450mm D x 750mm Ht., Storage Top made out of 25mm thick pre laminated particle board

and rest all storage to be made out of 18 mm thick prelaminated particle board . All exposed

edges shall be provided with machine pressed 2 mm thick PVC lipping glued with hot melt

EVA glue. Storage having a provision of 3 drawer unit, two openable shutter with D shape

handle & central locking arrangement.

Main Table Dimension (L)1800mm X (D) 900mm X (H)750mm 45000

overall Side Runer Dimension (L)1800mm X (D) 450mm X (H) 675mm

Digitally signed by AMIT

Sr.no Specification Qty Unit Rate

Supplying and placing in position of main table as per photograph/drawing .The table shall be

made out of 25mm thick pre -laminated particle board of approved shade. The working and

non working edges shall be finished with machine pressed with 2mm PVC egdge banding.

The table top shall be supported with MS powder coated "C" shape leg of size 50mm x 50mm

with connectors of size 40mm x 40mm. The front modesty are made out of 18mm thick

prelaminated particle board with 2mm thk pvc edge banding. The table shall be provisioned

with Side unit of overall size: 1800mm(L) x 450mm(D) x 675mm(H) . Side storage having a

provision for three equal drawer unit and two openable shutter & one open storage with

shelf in it. The Side unit top shall be made out of 18mm thick pre laminated particle board

and rest all storage to be made out of 18mm thick pre laminated particle board. Provision of

Junction box, wire raceway and 6 module fliptop box for wire passing or as per site

12 Medium Height Partition

Supplying and placing in position of sliding tile base modular Workstation as per photograph. 266000

Free standing partition height 1200mm and should be minimum of 62-67mm thick. Partition

inner frame is 1.0-1.2mm thick mild steel. Horizontal and vertical trims are made out of

extruded aluminum of 1mm thick. All Panels/trims shall be powder coated with 50 micron.

Aluminum trims are elegantly fixed with hidden connectors on the partition. The frame work

shall be fitted with 9mm thick pre laminated Particle tiles of approved shade. Partition shall 190 Sqft 1400

have provision for pin up board with fabric/ white marker/ laminated of approved shade.

Partition framework shall have adequate provisions for the movement of electric data cables

at desired 2 levels; one at skirting and another above / below the table top. The complete

partitioning work shall be carried out as per the approved drawing. The product should be as

per above given specification under the guidance of project Engineer in charge.

13 Conference Table

Digitally signed by AMIT

Sr.no Specification Qty Unit Rate

Supplying and placing in position of conference table of required size as per image/drawing.

The work surface top should be of thickness 42mm top prelaminated particle board with 2mm

thick PVC edge banding. The side panel are made up of 36mm thick prelaminated particle &

modesty panel are made out of 25mm thick prelaminated particle board with 2mm thick PVC

edge banding. The wire carrier should be made from 0.6mm thick CRCA & powder coated

40-50 microns. Also having a provision of 6 module flip top box & metal raceway for wire flow.

16 Openable Shutter storage

The storage top 25 mm thick, shutter and side panels are made of 18mm thick and back

panel is made of 09mm thick MDF of approved shade. All the edges of storage surface shall

be provided with machine pressed imported PVC lipping glued with hot melt EVA glue free

from any VOC with free groove handle and suitable lock. All exposed area PVC edge lipping

Net Total Amount In Rs = 1715855

Net Total Amount In Rs = 1715855

Digitally signed by AMIT