Special Repair to Electrical Installation work at out side barrack, hospital and cabling work at inside jail barrack at Central jail Vadodara Dist Vadodara [8th Attempt]

NAME OF WORK : SR to Providing and erecting Electricall installation, LED Ligh fitting, ceiling fan at outside barrack, and hospital and

LT panel and its related cabling work at circle departments at central jail at vadodara Dist: Vadodara.

Statement showing the approximate quantities for the items of the above work to be carried out and approximate cost

put to tender for Rs.

It. Description of Item Qty. Unit Estimated Rate [Rs. Ps.] Amount

No. In In Words Rs.

Providing and fixing Point wiring with 1.1 KV grade ISI marked approved make

2 x 1.5 sq.mm copper PVC insulated FRLS wire with 1.5 sq.mm (green) copper

PVC insulated FRLS wire for earth continuity in exiting FIA approved ISI mark

white colour medium class 20/25 mm dia. embossed rigid PVC pipe erected

flushed on wall/ceiling complete with company fabricated Metal Groove PVC

fitting fixed with adhesive solution erected On wall along with continuous G. I.

fish wire to draw wires complete with approved make 5/6 Amp. tissino type

switch and accessories mounted On Metal / PVC/Wooden Box covered with 3 RS: Two

1a mm thick PC(Polycarbonate) /Acrylic/Laminated sheet. with necessary Lamp 270.00 Point 255.00 Hundred Fifty Five

holder/ceiling rose / H.D.Connector as directed as directed for future extention only

, if required agency has to erect one higher size box & plate as per instruction of

EIC. cost of blank plate shall be paid as per tender itemFor Light Point-In

existing medium class Rigid PVC pipe and accessories erected flushed on

wall/ceiling complete [Wire must be having box packing]

It. Description of Item Qty. Unit Estimated Rate [Rs. Ps.] Amount

No. In In Words Rs.

For Fan Point--In existing medium class Rigid PVC pipe and

accessories erected flushed on wall/ceiling complete

1b 140.00 Point 255.00 Hundred Fifty Five

For separate Point (with 6 Amp. Switch & 3/5 pin socket both RS: Two

1c having ISI Make) 20.00 Point 223.00 Hundred Twenty

For loop on switch board (with 6 Amp. Switch & 3/5 pin socket

1d both having ISI Make) 1024.00 Point 66.00

For Bell point---In existing medium class Rigid PVC pipe and RS: Two

1e accessories erected flushed on wall/ceiling complete 50.00 Point 255.00 Hundred Fifty Five

Providing & Erecting following Shockproof tissino type accessories

erected on 3 mm thick PC (Polycarbonate) sheet in PVC/

Metal/Wooden Box. erected on wall/ ceiling.Electronic Hum free

2a 140.00 Each 217.00 Hundred Seventeen

EME Socket Type Steps Fan Regulator

Providing and erecting ISI mark Medium class RIGID PVC PIPES of

following size complete to be erected on/in wall or ceiling erected

with necessary PVC fittings & Junction boxes fixed with adhesive RS: Twenty

solution & Clamps with following dia of pipes, in approved manner Four only

as directed For 20 mm dia.

For 25MM Dia RS: Thirty

It. Description of Item Qty. Unit Estimated Rate [Rs. Ps.] Amount

No. In In Words Rs.

Providing & Erecting Mains with FRLS PVC Insulated wire ISI

marked 1.1 KV grade In Existing FIA approved ISI mark medium

class 20/25 mm dia. embossed rigid PVC pipe with PVC fitting fixed

with adhesive solution to be erected on/in brick wall / slab along

with continuous G. I. fish wire to draw mains laid in approved

manner with plastering by cement mortar & finishing the surface to

match the wall / ceiling complete with FRLS PVC insulated wire for RS: Forty Six

earth continuity. (Approved ISI make only) [a] 2 x 1.5 sq.mm. FRLS only

copper multi stranded conductor mains with 1.5 sq.mm. FRLS

copper multi stranded conductor for earthing as per standard colour

code.(In Existing 20/25mm Pipe) [Wire must be having box packing]

For 2 X 6.0 sq.mm. copper multi stranded conductor mains with

sq. mm copper multi stranded conductor earthing as per standard RS: One

4-b colour code ---(In Existing 20/25mm Pipe)[Wire must be having box 1500.00 Mtr. 120.00 Hundred Twenty

Providing & fixing 25 mm. dia. PVC insulated G.I. corrugated

Flexible pipe with necessary socket, PVC bushes saddle, Check-nuts RS: Thirty

etc. complete of following sizes. Seven only

It. Description of Item Qty. Unit Estimated Rate [Rs. Ps.] Amount

No. In In Words Rs.

Providing and fixing Plug Point wiring with 1.1 KV grade ISI marked

approved make 2 x 2.5 sq.mm copper PVC insulated FRLS wire with

1.5 sq.mm (green) copper PVC insulated FRLS wire for earth

continuity in FIA approved ISI mark white colour medium class

20/25 mm dia. embossed rigid PVC pipe erected flushed on

wall/ceiling complete with company fabricated Metal Groove PVC

fitting fixed with adhesive solution erected On wall along with

continuous G. I. fish wire to draw wires complete with approved

make complete with 16 AmpTissino type Swich and accessories

mounted tissino type switch and accessories mounted On Metal /

PVC/Wooden Box covered with 3 mm thick PC(Polycarbonate)

6 10.00 Point 317.00 Hundred Seventeen

/Acrylic/Laminated sheet. with necessary Lamp holder/ceiling rose

/ H.D.Connector as directed as directed for future extention , if

required agency has to erect one higher size box & modular plate as

per instruction of EIC. cost of blank plate shall be paid as per tender

item.(a) 16 Amp. tissino type Indicator switch & 1 No. 6/16 A tissino

type universal socket white colour suitable for 3 pin top duly both

having ISI mark.

It. Description of Item Qty. Unit Estimated Rate [Rs. Ps.] Amount

No. In In Words Rs.

Providing and fixing Plug Point wiring with 1.1 KV grade ISI marked

approved make 2 x 4 sq.mm copper PVC insulated FRLS wire with

2.5 sq.mm (green) copper PVC insulated FRLS wire for earth

continuity in FIA approved ISI mark white colour medium class

20/25 mm dia. embossed rigid PVC pipe erected flushed on

wall/ceiling complete with company fabricated Metal Groove PVC

fitting fixed with adhesive solution erected On wall along with

continuous G. I. fish wire to draw wires complete with approved

make complete with 16 AmpTissino type Swich and accessories

mounted tissino type switch and accessories mounted On Metal /

PVC/Wooden Box covered with 3 mm thick PC(Polycarbonate)

7 Each 434.00 Hundred Thirty Four

/Acrylic/Laminated sheet. with necessary Lamp holder/ceiling rose

/ H.D.Connector as directed as directed for future extention , if

required agency has to erect one higher size box & modular plate as

per instruction of EIC. cost of blank plate shall be paid as per tender

item.(a) 16 Amp. tissino type Indicator switch & 1 No. 6/16 A tissino

type universal socket white colour suitable for 3 pin top duly both

having ISI mark.

It. Description of Item Qty. Unit Estimated Rate [Rs. Ps.] Amount

No. In In Words Rs.

Supplying and Erecting LED indoor fitting of approximately 4feet

long with LED of wattage 0.2W to 0.5W assemble on single MCPCB

with housing use as a heat sink shall be made from Aluminum

extrusion having enough strength (sample must be approved by EIC)

with polycarbonate diffuser with following specification:

(A)Company mark/name on the fitting.

(B)Rated input voltage and frequency: 220V to 240 VAC ; 50Hz.

(C)Rated input wattage: max. 24w

(D)Rated input current : 0.2 Amp RS: Three

8 (E)Power Factor : Min. 0.90 200.00 Each 370.00 Hundred Seventy

(F)ATHD : Max. 15% only

(G)Rated Luminous flux: Min. 2420 lm

(I)CRI: Min. 80Ra

(J)Driver Efficiency: Min. 80%

It. Description of Item Qty. Unit Estimated Rate [Rs. Ps.] Amount

No. In In Words Rs.

(K)LED life span: Min. 50000 Hrs @ L70

(L)Over Voltage protection: Withstand up to 440V/AC for 4 Hrs.

(M)Surge protection : Min. 2KV

(N)IP rating: IP

(O)IK rating : IK

(P)Short circuit , Open circuit & Reverse Polarity Protection must be

(Q)Fixing clamp design & strength should be sufficient to hold the

fitting erected on wall or ceiling.

(R)3 core copper wire of appropriate size with earthing connector

(Note:-The manufacturer/ authorized Channel partner of the

manufacturer has to submit 5 yrs free replacement Guarantee for

complete Fixture) [Approval will be given strictly subject to item

Supplying and Erecting 8 W LED Lamps with following wattage

capacity of 220 to 240 voltage, minimum 15000 burning hours life,

500v in built- surge protection, Polycarbonate diffuser , mounting RS: One

9 suitable for E14 / E27 / B22 lamp holders, P.F >=0.5 (A) LED lamps 50.00 Each 111.00 Hundred Eleven

integral type with pc diffuser suitable LAMP holder. only

It. Description of Item Qty. Unit Estimated Rate [Rs. Ps.] Amount

No. In In Words Rs.

Providing & Erecting 2.0 mtr. long Earthing system by making minimum bore of 8.00 Each

225 mm dia. in soft soil. Suitable for doing pipe-in-pipe technology earthing.

Earthing electric rod must be made from Corrosion free hot dip galvanizing

pipes having following specification.

(A) Earthing Electrode: outer Pipe: - 88 mm minimum O.D., 'B ' Class ISI mark of

Reputed Brand, Inner pipe: - 42 mm minimum O.D., Pipe B Class ISI mark

reputed Brand. Terminal Size: 70 mm X 100 mm length, Terminal should be

made from inner pipe for that pipe must be pressed and gave rectangular shape

so its work as a terminal. The hot deep galvanising must be done after above

process. Galvanised thickness must be minimum 75 micron anywhere. SS Nut

bolt:- 2 nos. with washer suitable for 14 mm dia. hole must be provided at

10-a terminal. Total minimum Weight (approx.) of earth electrode with inside Thousand Twenty

conductive material be 26 kg. Five only

(B) Inner chemical (CCM Compound):- Resistivity:- 0.2 ohm/ meter testing as

per IEC 62561-2017, Voltage drop:- < 1 volt at no load & dry form, Sulphur

(C) Back fill Compound:- Earthing compound should be capable to retain

moisture for long time. Back Filling Compound weight is 25 Kg.

(D) Chamber and cover:- Earthing chamber should be size of 400 mm X 400 mm

X 400 mm depth and Cover should be heavy duty cast iron with required size of

300 mm X 300 mm X 4 mm thick.

It. Description of Item Qty. Unit Estimated Rate [Rs. Ps.] Amount

No. In In Words Rs.

Necessary test report must be submitted.

1. Short circuit test by ERDA/ CPRI for 25KA

2. Resistivity test of conducting material from NABL accredited lab.

3. Hot dip galvanised / zinc coating micro test from reputed

4. General test report from OEM regarding specification of earthing.

[Make and model approved by EIC Strictly subject to item

specification only] [OEM has to submit all detail & sample for

approved before supplying]

[Water must be poured in bore before starting earthing. Earthing

value must be measured with earth tester. Agency has to bring the

earth resistance to at least 02 ohms & voltage between neutral &

Earthing upto 02 volt. Agency has to maintain earthing & its value for

one year. Earthing must be done in the presence of A.E. (GSPHCL)]

For above earthing additional charges for boring in hard rock soil (by 8.00 Each

breaker) & filling soft soil in earth pit (certificate for soil have to given RS: Two

10-b by DEE / AE along with photographs) Hundred Seventy Six

It. Description of Item Qty. Unit Estimated Rate [Rs. Ps.] Amount

No. In In Words Rs.

Providing & Erecting Mains with ISI marked, 1.1 KV grade

electrolyte multi stranded, annealed copper conductor with heat

resistant PVC insulated conforms to IS:694, IEC - 227 erected in

existing pipe of following size (Specifically for control panel, relays, RS: Fifty Six

power switchgears, motor starters & control wiring) with required only

size of copper lugs, nuts and bolts if required. [f] One wire 6.00 sq.

For One wire 16.00 sq. mm RS: One

11-b 50.00 Mtr. 141.00 Hundred Forty One

Providing and erecting METALIC DANGER NOTICE BOARD for

medium voltage installation to be erected as per IS. RS: Sixty Nine

It. Description of Item Qty. Unit Estimated Rate [Rs. Ps.] Amount

No. In In Words Rs.

Providing, erecting, testing ceiling Fan confirming to IS: 374/1979

AMDT No. 1 to 6 Class-I, 50 Hz. Specification of Ceiling Fan must be

as per below. (1) Sweep: 1200 mm, (2) Operating Voltage: 180 to

V, (3) Power Factor: > 0.9, (4) Power Consumption: maximum 53W,

(5) RPM: minimum 330, (6)Service value:min 4.3 m3/mtr, (7) Class of

insulation: 'B', (8) No. of heavy duty premium quality Ball bearing:

Two, (9) Total Body: Top & Bottom should be alluminium, (10) Blade:

Aluminium approx 1.1 mm thick, (11) Colour: White high grade

powder coating, (12) Canopy: Two Nos. Heavy duty, (13) Condenser: RS: One

Min. 1.5 MFD (15% tolerance) as per IS 1709-1984 Branded make,(14) Thousand Nine

Down road: up to 1.0 mtr as per site tequirment, (15) Required fixing Hundred Twenty

accessories, (16) 3 core 0.75sq.mm wire as per site requirment,(17) no Nine only

vibration and noise due to mechanical parts.(18) Necessary saftey

wire should be erected with fan for safety & checked with EIC (OEM

has to approved model as per tender specification and tested at

Supplying & Erecting Fan Clamp of 30 x5 mm flat of required length

& 10mm MS Bolt & Nuts erected with necessary hook of 10mm M.S.

14 50.00 Each 98.00 Rs. Ninty eight only.

It. Description of Item Qty. Unit Estimated Rate [Rs. Ps.] Amount

No. In In Words Rs.

Providing ad erecting approved make single phase single Door metal clad D.B.

as per relevant indian standards ammended upto date.

Supplying and fixing following way single phase MCB distrubution board of

company fabricated MCBDB Door Back Side &body Must Be Made OF 1.2 MM

Thick CRCA Sheet sheet with sheet box with powder coated inside and outside

after apply seven tank chemical process of cover complete with suitable integral

single piece construction tinned copper busbar and link with all necessary

interconnection and with necessary size MS frame for mounting MCBDB.

Manufacturer must be provided (1) IP 43 and as per IS:8623-1 & 3, IEC 61439-1 &

3 having D type PU gasket. (2) Seven tank Powder coating Certificate (3) Tinned

Copper/Brass make neutral & Earthing link with isolation & Protecting Cover RS: Three

for 240 Volts on surface / recess complete with loose wire box, terminal Thousand Two

15 connectors for all incoming and outgoing circuits, with suitable size FRLS PVC 8.00 Each 3210.00

insulated copper conductor up to terminal blocks and internal connection, tinned

coppper bus bar, 1 no. tinned copper neutral link, tinned copper earth bar, din

bar, detachable gland plate, interconnections, powder painted including earthing

Single phase incoming and horizontal single phase outgoingFor 12 Way Single

door MCBDB with I/c:- 40 Amp. DP MCB (C curve) - 01 no. & O/G:- 6 Amp. to

25Amp SP MCB:- 10 Nos.(Rating of SP MCB to be installed as per EIC) Cat.-

III[To avoid separate ELCB box two extra way will be provided in above

It. Description of Item Qty. Unit Estimated Rate [Rs. Ps.] Amount

No. In In Words Rs.

Providing and erecting Approved make ELCBs / RCCBs conforming

to IS: 12640 and having sensitivity of 30 mA and Short Circuit

withstand capacity of 10 KA and suitable for operation on 1 phase

and neutral 240 V having characteristic of quick action & tripping

with all advance feature & do not incorporate any electronic

16 component (mounted in Box) for following Max. rating erected as 8.00 Each 2213.00

Hundred Thirteen

directed with same company metal box with earthing

terminal.Suitable for operation on Single phase 240 Volt max. rating

of (i) For 40 Amp. DP Cat.-III.

Providing & erecting 415V MCB Four Pole Switch for motor an

inductive Load (C curve) having 10KA breaking capacity & confirms

RS: Six Hundred

17 to IS :8828 in existing box having following capacity(b)40 Amp. 10.00 Each 662.00

Supplying & erecting approved make SMC press moulded

composite FRP. loop-in, loop-out approx. 2mm thick box complete

with Bakelite connector strip 5way(3P+N+E),DIN rail for mounting

mob & hinged doors as per requirement having locking RS: Eight

18 arrangements with mounting clamp with nuts, bolts & washers 10.00 Each 890.00 Hundred Ninty

suitable for erection on pole with cable clamps& earth bolt of only

following size of box(A) 300mm x 200mm x 100mm [deep]

It. Description of Item Qty. Unit Estimated Rate [Rs. Ps.] Amount

No. In In Words Rs.

Supplying & erecting 12 mm thick backelite sheet of approved make

and grade on25x25x3mm red oxide painted angle iron frame

suitable for fixing ICDP SWITCH and energy meter (contractor shall

make approved drawing of Bakelite sheet To arrange required NO of RS: Two

Energy meter& ICDPswitch -busbar etc as per Actual space available Sq.M Thousand Two

in electrical room at site) tr. Hundred Eighty

It. Description of Item Qty. Unit Estimated Rate [Rs. Ps.] Amount

No. In In Words Rs.

Providing & erecting weather proof, dust & vermin proof, floor mounted front

operated indoor type cubical panel board having IP42 & above protection as per

require made from 2 mm. thick CRC M.S. sheet for outer body & doors, 1.5 mm.

thick CRC M.S. sheet for internal partitions with necessary supporting angles,

flats including skirting, bending, drilling, welding, riveting with internal

partitions & cable alley as per requirements & instruction of engineer-In-Charge

with erection of supplied switchgears, busbars with suitable size of

interconnecting PVC copper wire / Copper-Aluminium strips, rubber gromets,

rib, control wires, backelite control fuses, measuring instruments, earth bus &

earth bolts, foundation flange-bolts-base plates, sufficient nos. of hinged doors,

handle with locking arrangement, rubber gasket complete with Required Nos.

heavy Duty Connector. heavy duty end terminal connection,danger notice

Sq.M Thousand Two

20 board,necessary ventilation,earthing strip complete.The panel shall be supplied 4.00 16230.00

with Seven Tank chemical process which shall be carried out before applying tr. Hundred Thirty

painting, painted with powder coating. (The rates excludes the cost of only

switchgears, busbars, interconnecting mains & Copper / Aluminium strip, fuse,

meters etc. The dimension shall be measured excluding base beams) Factory

inspection for verification of quality,workmanship and as per drawing & testing

before dispatch the material as per tender condition. The standard companies

switch gear shall be used and only manufacturers at CPRI approved factory as

per IEC 61439 and shall be certified by that company whose switch gears are

used after fabrication for beneficial use. With 350 mm depth

It. Description of Item Qty. Unit Estimated Rate [Rs. Ps.] Amount

No. In In Words Rs.

Panel manufacturer have to give 3 years maintenance and service

support if in case of breakdown or fault. Panel manufacturer have to

submit electrical meter calibration report. Agency should design the

panel in such a way that there should not be any excess in panel area

(sq.mtr) & length of bus bar (mtr), if any excess occurs draw attention

to GSPHCL at the time of approval of G.A. drawing. Loading and

unloading of above item shall be done by hydra and skill work force

under supervision of electrical engineer and guidelines given by

manufacturer to avoid damage to the item. Picture of it to be

submitted in running bill / final bill. RS:Zero

Size of door and Ele. room / Pump room shall be checked by only

agency's engineer before giving order. If found any problem in size

discuss with GSPHCL engineer for rectification before giving order.

[Including Necessary numbering / marking on PANEL done with

red colour radium sticker as per site requirement and instructions

given by EIC on site. Font / number size given by EIC on site as per

It. Description of Item Qty. Unit Estimated Rate [Rs. Ps.] Amount

No. In In Words Rs.

Providing & erecting weather proof, dust & vermin proof, floor mounted

front operated outdoor type double door cubical panel board necessary IP-

54 and above protection as per approval from engineer incharge made

from 14 SWG thick CRC M.S. sheet for outer body & doors, 16 SWG thick

CRC M.S.sheet for internal partitions with necessary accesories

supporting angles/ flats channel including cutting, bending, drilling,

welding, riveting with internal partitions & cable alley as per requirements

& instruction of engineer-in-charge with erection of supplied switch gears,

BUSBARS, suitable size of inter connecting PVC copper wire / copper-

aluminium strips, rubber grommets, rib, bakelite control fuses/MCB for RS: Twenty Three

measuring instruments, earth bus & earth bolts, foundation flange - bolts- sq.mt Thousand One

21 base Plates, sufficient nos. of hinged doors, handles with locking 2.00 23154.00

r Hundred Fifty Four

arrangement and rubber gasket,heavy duty end terminal

connection,danger notice board,necessary ventilation,earthing strip

complete. The Panel shall be painted with epoxy powder coating. (The

rates excludes the cost of switchgears, bus bars, inter connecting mains &

Copper Aluminium strips, meters, Fuses etc. The dimension shall be

measured excluding base beams) The panel shall be supplied with

following approved manufacturers with following size.

C) The standard companies switch gear shall be used and only

manufacturers at CPRI approved factory as per IEC 61439 for

beneficial use. (ii) with 550 mm. Depth

It. Description of Item Qty. Unit Estimated Rate [Rs. Ps.] Amount

No. In In Words Rs.

Supplying and erecting tripple pole & neutral 440V / 500 V Panel

mounting Copper Busbars with four equal Nos. of electrolyte bus

having current density not more than 1.6 Amp. / sq.mm (Rated

current / cross section area) duly wraped with colour insulating tape

for phase sequence of following current carrying capacity, erected

Rn. Thousand One

22-a with necessary bus bar supports / insulators, main cable socket to 2.00 3171.00

Mtr. Hundred Seventy

each bar, erected in existing cubical panel with necessary

connections.For electrolyte copper busbars Suitable for 200 Amp.

Suitable for 300 Amp. Capacity RS: Four

Rn. Thousand Eight

Mtr. Hundred Sixty One

Suitable for 400 Amp. capacity RS: Seven

Rn. Thousand Two

Mtr. Hundred Forty

Suitable for 630 Amp. capacity RS: Ten

Rn. Thousand Four

Mtr. Hundred Fifty Five

It. Description of Item Qty. Unit Estimated Rate [Rs. Ps.] Amount

No. In In Words Rs.

Supplying and Erecting Approved make Four pole moulded case

circuit breaker having breaking capacity ICU of 50 K.A. at 415 V.

having normal current rating 400 A. with Variable thermal & RS: Twenty Four

magnetic release suitable to work on A.C.supply 50 c/s. with all Thousand Nine

internal connections spreader tinned copper & complete erected in Hundred Seventy

existing 16 G.M.S. housing. housing. ICS=100% of ICU only Cat. III Nine only

Supplying and Erecting Approved make Four pole moulded case

circuit breaker having breaking capacity ICU of 35 K.A. at 415 V.

having normal current rating 250 A. with Variablefixed thermal & RS: Twenty

magnetic release suitable to work on A.C.supply 50 c/s. with all Thousand Seven

internal connections spreader tinned copper & complete erected in Hundred Thirty

existing 16 G.M.S. housing. housing. ICS=100% of ICU only Cat. III Nine only

Supplying and Erecting Approved make Four pole moulded case

circuit breaker having breaking capacity ICU of 35 K.A. at 415 V.

having normal current rating 200 A. with Variable /fixed thermal &

magnetic release suitable to work on A.C.supply 50 c/s. with all

25 1.00 Each 16061.00 Thousand Sixty One

internal connections spreader tinned copper & complete erected in

existing 16 G.M.S. housing. housing. ICS=100% of ICU only Cat. III

It. Description of Item Qty. Unit Estimated Rate [Rs. Ps.] Amount

No. In In Words Rs.

Supplying and Erecting Approved make Four pole moulded case

circuit breaker having breaking capacity ICU of 35 K.A. at 415 V.

having normal current rating 125 A. with Variable / fixed thermal & RS: Seven

magnetic release suitable to work on A.C.supply 50 c/s. with all Thousand Nine

internal connections spreader tinned copper & complete erected in Hundred Seventy Six

existing 16 G.M.S. housing. housing. ICS=100% of ICU only Cat. III only

Supplying and Erecting Approved make Four pole moulded case

circuit breaker having breaking capacity ICU of 25 K.A. at 415 V,

having normal current rating 25 A to 100 A. with variable/ Fixed

RS: Six Thousand

thermal & magnetic release suitable to work on A.C. supply 50 c/s.

27 15.00 Each 6112.00 One Hundred

with all internal connections spreader tinned copper & complete

erected in existing 16 G.M.S. housing. ICS=100% of ICU only.

Providing & Erecting (A) Extended operating rotary handle with

pad lock with three position trip,off,on suitable for 25A to 250 A

28 19.00 Each 865.00 Hundred Sixty Five

panel mounting cat-III.

Providing & Erecting (B)Extended operating rotary handle with pad RS: One

lock with three position trip,off,on suitable for 400A to 630 A panel Thousand Two

mounting cat-III Hundred Ninty

It. Description of Item Qty. Unit Estimated Rate [Rs. Ps.] Amount

No. In In Words Rs.

Supplying and erecting Approved make Earth fault Relay suitable to

mount with inter connection to moulded case circuit breaker having

CT ratio & MCCB rating as following along with shunt trip 220 V AC

30 with all internal connections & complete erected in existing 1.00 Each 5362.00

Hundred Sixty Two

M.S.housing.250-400 A., CT Ratio 1/400

Supplying & erecting approved make Four Pole 415 V change over

switch interior for panel mounting with operating mechanism A.C.23 RS: Twenty Two

31 duty confirming to I.S.S. for 400 Amp. 1.00 Each 22035.00 Thousand Thirty

Miniature circuit breaker single pole 6 Amp. to 25 Amp. suitable to

operate on 240 V A.C. system and having breaking capacity 10 KA to RS: One

32 be erected in existing box. confirming to IS 8828/1996 with ISI Mark. 10.00 Each 111.00 Hundred Eleven

Providing & erecting 240 V MCB Double pole switch for Motor &

Inductive Load (c curve) having 10 KA breaking capacity & confirms RS: Three

33 to IS:8828 in Existing M.S. box having following capacity. For 40 10.00 Each 327.00 Hundred Twenty

Amp. Seven only

Providing & erecting 240 V MCB Double pole switch for Motor &

Inductive Load (c curve) having 10 KA breaking capacity & confirms RS: Two

34 to IS:8828 in Existing M.S. box having following capacity. For 6-32 10.00 Each 297.00 Hundred Ninty

Amp. Seven only

It. Description of Item Qty. Unit Estimated Rate [Rs. Ps.] Amount

No. In In Words Rs.

Providing & erecting 415 V MCB Four Pole for Motor & Inductive

Load (C Curve) having 10KA breaking capacity & confirms to IS RS: Seven

35 :8828 in existing box having following capacity [c] 63 Amp. 30.00 Each 730.00 Hundred Thirty

Providing and erecting metalic danger notice board for MEDIUM

36 VOLTAGE installation to be erected as per I.S. 10.00 Each 69.00

Supplying, erecting, testing and commissioning of approved make

panel mounting type Digital Voltmeter having 3 digits LED display

0 to 750 AC Volts range having 0.5 Class accuracy erected on existing

37 panel board with all connection, wiring ete., with manufacturers 1.00 Each 1263.00

Hundred Sixty Three

calibration certificate.

Supplying and erecting approved make panel mounting type Digital

Ammeter having 3 digits LED display, external CT operated,

calibrated for 0 to 1000 Amps. suitable to operate on 500 Volt AC, RS: One

having 0.5 Class accuracy erected on existing panel board with all Thousand Five

connection, wiring etc. with manufacturers calibration certificate. Hundred Forty Three

Supplying and erecting Ammeter / Voltmeter selector switch for

phase AC Supply 500 V on existing panel board with necessary

39 4.00 Each 314.00 Hundred Fourteen

It. Description of Item Qty. Unit Estimated Rate [Rs. Ps.] Amount

No. In In Words Rs.

Supplying and erecting approved make set of indicator lamps of

LED type lamp, lense cover, Bakelite holder complete erected with RS: Forty Three

necessary connections. only

Providing & erecting L.T. Current Transformer with bar primary

50/5 to 1000/5 ratio 15 VA burden having 0.5 Class accuracyerected RS: Two

41 in existing CRCA box duly secured with insulating materials 6.00 Each 272.00 Hundred Seventy

connected to the meter Two only

Supply, Installation, Testing & Commissioning of Three Phase, 440 V

Surge Suppressor protection Device (SPD) & 40 Amp. TPN MCB (or

as per SPD OEM guideline for the protection of SPD which is erected

such a way that it can be operated easily) SPD Must be Capable to RS: Six Thousand

42 Protect all electrical and electronic equipments. The Detail 1.00 Each 6319.00 Three Hundred

Specification are As per Attached sheet with Annexture -A (Hakel, Ninteen only

Iskira,OBO make) (With Three year Gaurantee / Warranty)

It. Description of Item Qty. Unit Estimated Rate [Rs. Ps.] Amount

No. In In Words Rs.

Providing and fixing approved make Ladder type cable tray. Made

from M.S sheet. The cable tray should be bended as per IS 2062/1079

shall be fabricated of double bended channel section longitudinal

members with single bended Channel section. Rungs of members

welded to the base of the longitudinal members at 250 mm c/c

spacing . as per IS and shall be coated with hot dip galvanizing as per

43 50.00 Mtr 306.00 Hundred Six

IS 2629/4759. with coupler plate / Fish plate and GI hardware like

nut - bolt and washers etc. erected on existing support as per

Specification and as per instruction of engineer in charge.. 300 X 50 X

Providing & erecting XLPE (IS : 7098) (I)-88 ISI marked armoured

Aluminium conductor cable for 1100 volt to be laid 90 cms. Under

ground or to be laid on wall with 1.0 m.m thick G.I. heavy guage RS: Eight

44-a cable clamp or in existing DWC pipe underground or road crossing 600.00 Mtr 896.00 Hundred Ninty Six

or floor .(H) 3 1/2 core 185 Sq. mm ( 95 Sq. mm 1/2 core) (FOr Jail only

Ele room to Inside barrack panel room)

3 1/2 core 95 Sq. mm ( 50 Sq. mm 1/2 core) (For Main ele room to RS: Four

44-b outside barrack) 500.00 Mtr 486.00 Hundred Eighty Six

It. Description of Item Qty. Unit Estimated Rate [Rs. Ps.] Amount

No. In In Words Rs.

Providing & erecting XLPE (IS : 7098) (I)-88 ISI marked armoured

Aluminium conductor cable for 1100 volt to be laid 90 cms. Under

ground or to be laid on wall with 1.0 m.m thick G.I. heavy guage RS: One

45 cable clamp or in existing DWC pipe underground or road crossing 3000.00 Mtr 152.00 Hundred Fifty Two

or floor(A) 4 core 16 Sq. mm only

Providing & laying. R.C.C. Hume pipe for cable to be laid 90 cm.

below ground across the road crossing or on floor with necessary RS: Three

46 material in an approved manner and making the ground as per 350.00 Mtr 340.00 Hundred Forty

original.(C) 300 mm dia only

Providing & laying. R.C.C. Hume pipe for cable to be laid 90 cm.

below ground across the road crossing or on floor with necessary RS: Two

47 material in an approved manner and making the ground as per 450.00 Mtr 261.00 Hundred Sixty One

original.(E)150 mm dia only

Providing & laying HDPE Double walled corrugated pipes (DWC)

(conforming to IS: 16205 (part 24) 2018)) with minimum load

required of 450N capacity with anti rodent and ultra violet material

properties with necessary connecting accessories of same material at

required depth to be laid 90 cms. under ground for laying of cable RS: One

48-a below ground / road surface for enclosing cable and back filling the 3000.00 Mtr 117.00 Hundred Seventeen

same to make ground as per original. (A) For Outer dia. 50 mm and only

Inner dia. 38 mm. (Test Certificate to be Submitted)

It. Description of Item Qty. Unit Estimated Rate [Rs. Ps.] Amount

No. In In Words Rs.

For Outer dia. 90 mm and Inner dia. 75 mm. (Test Certificate to be RS: One

48-b Submitted) 100.00 Mtr 150.00 Hundred Fifty

For Outer dia. 120 mm and Inner dia. 90 mm. (Test Certificate to be RS: One

48-c Submitted) 100.00 Mtr 191.00 Hundred Ninty One

Providing & fixing Double compressed heavy duty flange type

brass cable gland with rubber ring for P V C insulated armoured

cable complete with outgoing tails, insulating tape etc. For following

49-a 10.00 Each 236.00 Hundred Thirty Six

size cables. For 3*1/2 core X 185 Sq. mm (Sigma, MCI, Comet Make

(D) 3 & 1/2 core 95 Sq. mm RS: One

49-b 10.00 Each 130.00 Hundred Thirty

Providing & fixing Double compressed heavy duty flange type brass

cable gland with rubber ring for P V C insulated armoured cable

complete with outgoing tails, insulating tape etc. For following size RS: Sixty Six

cables. For 4 core x 16.0 Sq. mm (Sigma, MCI, Comet Make Only) only

Providing & fixing Solderless crimping type Aluminium lugs

conforming to IS suitable for cable of following size evenly crimped

with high pressure tool & connected to switchgear terminals with RS: Fifteen

brass/cadmium plated nut bolts in an approved manner. For 16/25 only

Sq.mm. Allumium Cable

It. Description of Item Qty. Unit Estimated Rate [Rs. Ps.] Amount

No. In In Words Rs.

Providing & fixing Solderless crimping type Aluminium lugs

conforming to IS suitable for cable of following size evenly crimped

with high pressure tool & connected to switchgear terminals with RS: Eighty

brass/cadmium plated nut bolts in an approved manner. For 185.00 only

Sq.mm. Allumium Cable

(F) 95 Sq.mm RS: Forty

(D) 35/50 Sq.mm. RS: Twenty

Providing, erecting, fabricating the M.S. structure as per requirement

of site as per structure design Including proper size approved by EIC

of M.S. angles, flats, bars, square pipe, channels, sections (Tata, Jindal,

Asian, JSI Make) complete with cutting, welding, grinding and

finishing duly painted with Asian/Nerolac make premium quality oil

paint and true care red oxide metal primer,asian paint make with RS: Seventy

53 erection on site as per direction of engineer in charge with necessary 300.00 Kg. 75.02 Five and Paise Two

grouting cementing, plastering and finishing complete. All hole only

opening of square pipe end must be closed with M.S plate welding.

Payment will be done on KG as per Actual weight.

It. Description of Item Qty. Unit Estimated Rate [Rs. Ps.] Amount

No. In In Words Rs.

Providing & erecting XLPE (IS : 7098) (I)-88 ISI marked armoured

Copper cable for 1100 volt to be laid 90 cms. Under ground or to be

laid on wall with suitable G.I. heavy guage 1.0 mm thick cable clamp RS: Three

54 or in existing DWC pipe underground or road crossing or floor..For 4 100.00 Mtr. 361.00 Hundred Sixty One

core x 4 sq.mm. only

Dismantling the existing light, fan, bell, independent plug point,

wiring with mains of all types along with accessories etc. complete RS: One

and handed over to dept. only

Dismantling the existing switchgears, DB and Busbar of any size

56 complete with / without board or angle iron frame. 10.00 Each 7.00

Dismantling the existing any type of indoor light fittings RS: Five

Dismantling the existing ceiling fan / exhaust fan / cabin fan /

bracket fan complete with accessories, G.I. down rod, frame etc. and RS: Nine

making the site clear. only

It. Description of Item Qty. Unit Estimated Rate [Rs. Ps.] Amount

No. In In Words Rs.

Constructing brick masonry chamber for under ground C.I.

inspection chamber and bends with brick having crushing strength

not less than 35 kg./cm2 in C.M. 1.5 precast R.C.C. cover 1:1.5:3 of

size 455 x 610 mm internal dimenslons. R.C.C. top slab with C.C.

1:1.5:3 mix (1 Cement : 1.5 coarse sand :3 graded stone aggregate

20mm size) foundation concrete 1:5:10 inside plaster 15mm thick RS: Three

with cement mortar 1:3 finished smooth with a floating coat of neat Thousand Seven

59 cment walls & bed connect etc. complete rate inclusive of outside 15.00 Nos. 3793.18 Hundred Ninty

plaster of 15mm thick in cm 1:3 form top of chamber and all side up Three and Paise

to 15 cm deep below ground level. rate also inclusive of providing Eighteen only

and fixing precast cover of size 0.7 m x 0.5 x .07 m with 2 no of m.s.

flat handle in cement concrete 1:1.5:3.

Providing and fixing pre-cast Rubber Dye/ Steel Dye inter locking

concrete block 60mm thick grade of concrete M300 pnumatic

compressed/vibrated mechanically and as per approved design

RS: Six Hundred

Conforming to IS 15658:2006 including 35mm sand layer for levelling sq.mt

60 30.00 697.10 Ninty Seven and

and filling the joint with sand in proper line and level as per r

guidelines of IRC: SP 63-2018 etc. complete.

It. Description of Item Qty. Unit Estimated Rate [Rs. Ps.] Amount

No. In In Words Rs.

Supplying & erecting approved make SMC press moulded

composite FRP. loop-in, loop-out approx. 2mm thick box complete

with bakelite connector strip 4way & hinged doors having locking

arrangements with mounting clamp with nuts, bolts & washers

61 20 Each 890 Hundred Ninty

suitable for erection on pole with cable clamps& earth bolt of

following size of box.For ( c) 300mm x 200mm x 100mm [deep] ( For

All Barrack Incoming supply)

Providing & Erecting following Shockproof tissino type accessories

erected on 3 mm thick PC (Polycarbonate) sheet in PVC/

62-a Metal/Wooden Box. erected on wall/ ceiling. : One no 3/5 pin 6 A 20.00 Each 31.00

One no Single pole 16 A Switch RS: Forty Seven

One no 6/16 A Universal Socket RS: Forty Seven

One no Single pole 16 A Switch & One no 6A/16A Universal Socket RS: One

62-d combined with indicator & fuse 70.00 Each 124.00 Hundred Twenty

Bakelite ceiling, rose RS: Eighteen

Bakelite lamp holder RS: Twenty

Providing & Erecting 3mm thick White Color ISI Mark laminated

acrylic Sheet with grooving as directed by EIC(Make:Sundek) Sq.in RS: Three

It. Description of Item Qty. Unit Estimated Rate [Rs. Ps.] Amount

No. In In Words Rs.

Cable Terminal ( ‘Z" Type) Set of Two for (i)200 / 250 Amps RS: Five

64 10.00 Each 501.00 Hundred One

Cable Terminal ( ‘Plain" Type)Set of Four for (ii) 125 / 200 Amps RS: Eight

65 10.00 Each 806.00 Hundred Six

Cable Terminal ( ‘Plain" Type)Set of Four for (ii) (iii) 250 / 320 Amps RS: One

Supplying & erecting single phase approved make industrial exhaust

fan suitable for medium duty ring mounted low noise operation

suitable for medium duty having metallic grill and following dia size

67 30.00 Each 2034.00 Thousand Thirty

and maximum speed in RPM [A] 305 mm dia 900 RPM

S.I.T.C. submersible pump set suitable for bore of 150 mm. dia. or

more having three phase motor capacity not more than 7.5 H.P. with

RS: Thirty Three

following capacity . Lifting and Lowering taken extra.(B) ( 8 stage)

68 390 to 350 LPM discharge at 62 to 70 mtrs. head respectively suitable 1.00 Each 33225.00

for 50mm dia. delivery pipe

It. Description of Item Qty. Unit Estimated Rate [Rs. Ps.] Amount

No. In In Words Rs.

Supplying & erecting approved make motor control cubical panel

(Direct - on - line) made from 16 G. CRCA sheet duly epoxy powder

painted inside and outside with hinged doors and locking,

arrangement consisting of suitable size of ON- OFF isolator (AC -

3/23duty) main fuses, single phasing preventer, indicating lamps for

R- Y - B phases, overload relay, Automatic water level controller, RS: Eight

Ammeter, Voltmeter each with two way selector switch incoming, Thousand Six

wires duly socket crimped, main contactor & overload relay, start - Hundred Twenty

stop push buttons, to be erected on angle iron frame grouted on wall Four only

as directed. The isolator, overload relay & contactors will be of L & T,

Siemens or BCH make only. (B) DOL for 7.5 H.P.

Lifting of submersible motor pump set complete with required No .&

size of casing pipes by means of proper chain pulley block and RS: One

pipe. wrenches. Job includes stacking of pipes chronologically after Per Thousand Six

due checking of threads.(A) Up to 60 mtrs. job Hundred Ninty Five

Providing and erecting ISI marked PVC insulated PVC Sheathed Flat

flexible Submersible copper cable approved make of following Size.

71 100.00 Mtr 145.00 Hundred Forty Five

(C) 3 Core x 4 Sq. mm

It. Description of Item Qty. Unit Estimated Rate [Rs. Ps.] Amount

No. In In Words Rs.

Supplying ISI Marked (Embossed) following size of Heavy duty “C”

Class G.I . Pipe & erecting as directed by Engineer-in-charge with RS: Three

72 necessary plumbing as desired.(D) 50 mm dia 20.00 mtr 352.00 Hundred Fifty Two

eavy duty clamp made from 4" x 1.5" iron strip suitable for column RS: One

73 pipe 1.5" to 2" length. (B) 50mm(2") dia pipe 1.00 Each 178.00 Hundred Seventy

Supplying & erecting G.l. bend for pipe connections suitable for (D) RS: One

74 50 mm(2") 1.00 Each 114.00 Hundred Fourteen

Supplying & erecting UPVC heavy duty Flanges with rubber

packing and hardware materials for pipe connections suitable for (A)

75 2.00 Each 157.00 Hundred Fifty Seven

Supplying & erecting approved make by EIC Hi–Tech, Hi-Tensile

submersible pump column pipes UPVC white colour- 3 meter height

one end male threaded & other end female threaded PVC Joint

76 30.00 Each 1068.00 Thousand Sixty

system with coupler & S.S. wire lock (heavy type)50 mm (27 kgf/cm²)

Supply of following size of TOP & BOTTOM accessories i.e. Adaptor

set (CI) long, pump guard set, starter pipe Rubber ring for RS: One

submersible pump & UPVC column pipe as directed by Engineer - in Per Thousand Four

- charge with necessary plumbing as desired.50 mm set Hundred Seventy

It. Description of Item Qty. Unit Estimated Rate [Rs. Ps.] Amount

No. In In Words Rs.

Providing and erecting open well type horizontal submersible mono

block pump set with cast iron body having following specification

[E] For 3 phase open well horizontal mono block pump set suitable

for 1350 LPM to 310 LPM discharge at required head as per

plumbing length and vertical & Horizontal head.Agency has to

submit the details calculation of head to GSPHCL and get approval

of make and model of pump having tender specification with TDS &

GA drawing. Suitable for 65/75 mm dia delivery pipe with 10 mtr.

necessary Size 3 Core Flat copper flexible cable. (Body: Cast iron /

Winding : Copper / stator : Copper / rotor : Copper / shaft : SS

78 material test certificate from manufacture shall be submitted). The 2 Each 18561

Hundred Sixty One

model of the pump with respect to head and discharge will be

approved by EIC. Pump should have following specifications: (1)

Minimum 10 mtr. Cu. flat cable of suitable size must be provided

with pump.(2) Pump shall be installed as per manufacturer

foundation/erection drawing or as per IS specification. (Body full

C.I., stator winding- copper, rotor- copper, shaft- SS 304, motor-

Energy efficiency)

Lowering of existing submercible motor pump set complete with

required No. and size of pipes by means of proper chain pulley block RS: Eight

79 and pipe wrenches. Job includes stacking of pipes cronolo1.00 HP to 2 Each 848 Hundred Forty Eight

It. Description of Item Qty. Unit Estimated Rate [Rs. Ps.] Amount

No. In In Words Rs.

Providing & erecting ISI make medium duty (B class) galvanized MS

pipe with coupling, bend, union, reducer, tee, MS flange etc. with

80 30 Mtr. 260 Hundred Sixty

plumbing charges. [d] 50 mm dia

Supplying and erecting C.I. Swing check type non-return (reflux) RS: One

valve ISI marked with packing, flange, nuts and bolts etc.suitable for Thousand Ten

following pipe size. [a] For 50 mm dia. Hundred Ten

It. Description of Item Qty. Unit Estimated Rate [Rs. Ps.] Amount

No. In In Words Rs.

Supplying and erecting approved make 5 HP DOL type motor control

cubical panel made from 16 G. CRCA sheet duly epoxy powder painted

inside and outside with hinged doors and locking arrangement Floor

Mounting On 300 mm Height with MS Stand Angle & CC Foundation. Size

35 mm (H) x 35 mm (W) x 05 mm (D). Panel must be with Minilec Relay

for automatic changeover of pump 1 & 2 logically without using manually

changeover switch. The detail specification & quantity of material used are

as under. (Minimum Panel Size: 1.10 meter (H) x 1.10 meter (W) x

INCOMMER SECTION: (1) MCCB-30 KA-TP (DU-100H), Rating: 63 Amp., RS: Forty Six

Make: L&T, Qty: 01 No. (2) Digital Ammeter (SR-65), Rating: 0-60 Amp., Thousand Seven

82 Make: Meco, Qty: 01 No. (3) Ammeter Selector Switch, Rating: 6 Amp., 1 Each 46761

Hundred Sixty One

Rotary, Make: Salzer, Qty: 01 No. (4) Digital Voltmeter (SR-65), Rating: 0-

500 V, Make: Meco, Qty: 01 No. (5) Volt Selector Switch, Rating: 6 Amp.,

Rotary, Make: Salzer, Qty: 01 No. (6) C.T.- Current Transformer, Rating:

60/5 Amp., Make: Virat, Qty: 03 Nos. (7) Indicating Lamps (R,Y,B), Rating:

22.5 mm LED, Make: Airon, Qty:03 Nos. (8) SP MCB , Rating: 20 Amp.,

Make: L&T , Qty: 03 Nos. (9) Control Wiring, Rating: 1.0 Sq.mm, Make:

Any ISI, Qty: Lot (10) Copper Busbar, Rating: 63A/100 Amp., Qty: Lot11)

Numeric logical relay, Qty: 1 No.Make:Minilec

It. Description of Item Qty. Unit Estimated Rate [Rs. Ps.] Amount

No. In In Words Rs.

Outgoing Feeder (5 HP DOL Feeder): Qty: 02 Nos. (1) MCB-TP-10

KA, Rating: 20 Amp., Make: L&T, Qty: 02 Nos. (2) Power Contactor

(415 V) Main, Rating: 12 Amp., Make: L&T, Qty: 02 Nos. (3) Over

Load Relay, Rating: 9-15 Amp., Make: L&T, Qty: 02 Nos. (4) Digital

Ameter (SR-65), Rating: 0-20 Amp., Make: Meco, Qty: 02 Nos., (5)

Digital Voltmeter (SR-65), Rating: 0-500 V, Make: Meco, Qty: 02 Nos.

(6) Indicating Lamps (Start,Run,Trip), Rating: 22.5 mm LED, Make:

Airon, Qty: 04 Nos. (7) Push Button (Start,Stop), Rating: 22.5 mm,

Make: Airon, Qty: 04 Nos. (8) SPP, Rating: 415 V, Make: Space, Qty:

02 Nos. (9) Terminal, Rating: As per Amp., Make: Airon, Qty: 04 Nos.

(10) Control Wiring, Rating: 1.0 Sq.mm., Make: Any ISI, Qty: Lot (11)

Power Wiring, Rating: As Per Amp., Make: Any ISI, Qty: Lot

Outgoing Feeder (6 Amp. - 01 No.) For Capacitor (1) MCB-TP-10 KA,

Rating: 6 Amp., Make: L&T, Qty: 01 No. (2) Capacitor- MPP Type,

Rating: 2 KVAr, Make: Concap, Qty: 02 No., (3) Power wiring, Rating:

As Per Amp., Make: Any ISI, Qty:Lot

Outgoing Feeder (32 Amp. - 01No.) For Lighting (1) MCB-TP-10 KA,

Rating: 32 Amp., Make: L&T, Qty: 01 No. (2) Power wiring, Rating:

As Per Amp. (3) Earthing Strip: 25 x 6;A.L.Strip, Qty: 01 No.(4) MCB-

DP-10KA , Rating: 20A, Make: L&T, Qty.:01 Nos.

It. Description of Item Qty. Unit Estimated Rate [Rs. Ps.] Amount

No. In In Words Rs.

Providing and erecting ISI marked PVC insulated PVC Sheathed Flat

flexible Submersible copper cable approved make of following Size.

83 60 Mtr. 171 Hundred Seventy

[d] 3 Core x 6.00 Sq. mm

Providing water proof straight joint in PVC insulated flat flexible

copper cable by using insulated material water proofing material and RS: One

84 making the joint complete. UP to 10 Sq.mm 2 Each 188 Hundred Eighty

Total Amount ( Rs.)

Total Amount ( Rs.)

Signature of contractor Executive Engineer.

Gujarat State Police Housing Corp. Ltd.