Loading
Loading…
Loading…
Tender ID
Tender Value
₹4.4 L
EMD Value
₹5,500
Closing Date
13 Mar 2026, 9:30 pmClosed
Public Works Department
EXECUTIVE ENGINEER
Repairing the store room next to room 193 of lh-3 and removing the false ceiling. Removing the roof and installing a new roof, painting, repairing the toilet. A door/ladder needs to be installed at the back of MLA Bhavan-3 and the temple and repairing the construction joint of MLA Bhavan-3 and the new mall and other necessary works(Reserved for ST)
PWD/2025-26/BD/WORK_INDENT33293/CALL-2
PWD/2025-26/BD/WORK_INDENT33293/CALL-2
Reserved
Buildings
Two Tender Document System(Two Cover)
PWD No.1 Buildings Division Office Bengaluru
5 documents required · 5 mandatory
3.2 To qualify for award of this contract, each Tenderer in its name should have in the last five years i.e. 2020-21 to 2024-25 b) Satisfactorily completed as prime contractor, at least any civil engineering work to an extent of 25% of the cost of the work i.e. Rs 1.09 Lakhs
3.6.Tenderers who meet the above specified minimum qualifying criteria, will only be qualified, if their available tender capacity is more than the total tender value. The available tender capacity will be calculated as under: Assessed available tender capacity (AxNx5-B) Where A is Maximum value of civil engineering works executed in any one year during the last five years taking into account the completed as well as works in progress. N is Number of years prescribed for completion of the works for which tenders are invited 2 months. B is Value, at 2025-26 price level, of existing commitments and on-going works to be completed during the next 2 months. Note The statements showing the value of existing commitments and on-going works as well as the stipulated period of completion remaining for each of the works listed should be countersigned by the Employer in charge, not below the rank of an Executive Engineer or equivalent
3.2 To qualify for award of this contract, each Tenderer in its name should have in the last five years i.e. 2020-21 to 2024-25 a)Achieved in at least One financial years an average annual financial turnover (in all classes of civil engineering construction works only) of Rs 4.39 lakhs
₹500
₹5,500
6 Mar 2026
6 Mar 2026
16 Mar 2026
7 Mar 2026
Repairing the store room next to room 193 of lh-3 and removing the false ceiling. Removing the roof and installing a new roof, painting, repairing the toilet. A door/ladder needs to be installed at the back of MLA Bhavan-3 and the temple and repairing the construction joint of MLA Bhavan-3 and the new mall and other necessary works
Dismantling aluminium/ Gypsum partitions, doors, windows, fixed glazing and false ceiling including disposal of unserviceable material and stacking of serviceable material to the appropriate disposal ...
Dismantling of flushing cistern of all types (C.I./PVC/Vitreous China) including stacking of useful materials near the site and disposal of unserviceable materials to the appropriate...
Removing of existing old or broken wash basin / urinals/ Indian Water closet/ European Water closet and disposing it with all cost and conveyance labour for all items of work, HOM with all l...
Providing and fixing PVC (S.W.R) Nahani Trap 10cms x 10cms with all fitting arrangements & all necessary accessories complete
Removing white or colour wash by scrapping and sand papering and pre- paring the surface smooth including necessary repairs to scratches etc. complete as per specifications and as per directions of En...
Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even an...
Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound) content. With ready mixed pink or grey primer ...
Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 g/L of approved brand and manufacture, including apply...
Providing and fixing Bidet spray made of Stainless steel with all concealed fitting arrangements & all necessary accesories complete - class - Premium
Providing and fixing Pillar Cock made of Stainless steel with all concealed fitting arrangements & all necessary accesories complete - class - Premium
Providing and fixing C.P. brass angle valve for basin mixer and geyser
points of approved quality conforming to IS:8931
Providing and fixing Bib cock Two way with wall flange made of Stainless steel with all concealed fitting arrangements & all necessary accesories complete - class - Premium
Providing and fixing Towel rail 600mm length made of Stainless steel with all concealed fitting arrangements & all necessary accesories complete - class-Premium
Providing and fixing 600x450 mm beveled edge mirror of superior Glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complet...
Providing and fixing Angle cock with wall flange made of Stainless steel with all concealed fitting arrangements & all necessary accesories complete - class - Premium
Providing and fixing PTMT shelf 440 mm long, 124 mm width and 36
mm height of approved quality and colour, weighing not less than 300 g.
Repairs to existing aluminium partition including Glass,board, lock, handle, beading etc cost of all material,labour, complete as per specifications.
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the...
Providing and fixing P.V.C. waste pipe for sink or wash basin including
P.V.C. waste fittings complete. Flexible pipe : 32 mm dia
Dismantling roofing including ridges, hips, valleys and gutters etc., and stacking the material to the appropriate disposal area as per direction of Engineer-in-charge.G.S. Sheet
Providing & fixing corrugated G.S. sheet roofing including vertical / curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers ...
Providing and fixing Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat...
polyurethane based single Component for Existing surface - Providing and Applying PU based Elastomeric Liquid Applied PU Waterproofing Membrane single component, cold applied, water based acry...
Forming groove of uniform size in the top layer of plaster as per approved pattern including repair to the edges of panels and finishing the groove complete as per specifications and direction of ...
Repair of pull and push type rolling shutters of made of 18 guage, 75mm wide cold rolled steel laths of convex corrugation, with side guides and bottom rail, with interlocking arrangements for steel l...
Repairs to plaster in patches of 2.5 m2 and less in walls, ceilings 10 to 20mm thick in cement mortar 1:4 including cutting the patches in proper shape and replastering the surface of the wall inclu...
Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :Two coats on new work over an under coat of suitable shade with ordinar...
Applying priming coat: With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/ steel works including preparing the surface after ...
Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :One coats on old work as per specifications and as per directions of En...
Providing 12 mm cement plaster with cement mortar 1:6 (1 cement: 6 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including co...
Treating Active leakage from Concrete walls - Providing and grouting with single component Polyurethane Foam injection grout at dripping leakage locations, grout mixed at ratio of 10:1 (10 part...
Toilets Tile Joints (Repair) - Providing and grouting tile joints, Cutting the tile joints with the help of cutting machine (width 3mm-15mm) and filling with of matching shade, using three component E...
Providing & fixing valleys of 90 cm wide overall in plain G.S. sheet fixed with polymer coated J, or L hooks, bolts and nuts 8 mm dia G.I. limpet and bitumen washers complete as per design drawings. 1...
Supplying and fixing "HINDWARE" or Equivalent Counter Wash Basin Table top WB Immacula Cat Code No-91205 the item is inclusive of all materials, lead and lift, loading and unloading, Transportation ch...
Providing and fixing Hindware or Equivalent make white vitreous china clay, water closet European type of size 67*41*71.5cm (Pedestal type, P- trap) with black solid plastic seat and lid, C.P. brass h...
Cleaning of Glazed tiles using floors and surfaces cleaners non corrosive with chemicals Hydrochloric acid, butyl oley tamine and other which are soluble and capable of removing hard and soft stains a...
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
33293 KW1 ST CALL-2.docx
Tender Document • 0.67 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .