Construction of Ayurvedic Health Centre at Patta Jattian in Tehsil Fatehpur, Distt. Kangra HP

Amount

Excavation in foundation trenches etc. in earth work in all kinds of classification of soil such as pick work, jumper work, pick jumper work, blasting work, soft and hard blasting and doing work in saturated soil, including chiseling or wedging out rock where blasting is prohibited, or any other mixed variety of soil including shoring, strutting, de-watering and pumping or bailing out water (surface and sub soil water) upto any depth or any quantum of water including slush which may arise during dewatering, removal of slush and stacking the excavated soil clear from the edge of excavation with in all leads, as directed by Engineer-in-Charge and then returning the stacked soil in 15cm (fifteen centimeters) layers when required into plinths and sides of foundations etc. consolidating each deposited layer by ramming, watering and then disposing of all surplus excavated earth as directed by Engineer-in-Charge with in all leads and lifts, disposed earth to be levelled and neatly dressed including carriage of materials within all leads and lifts.

Excavation in drains and channels etc. in earth work in all kinds of classification of soil such as pick work, jumper work, blasting work, pick jumper blasting work, hard blasting work including chiseling or wedging out rock where blasting is prohibited and doing work in saturated soil including cost of shoring, strutting and pumping or bailing out water (surface and sub soil water) upto any depth and any quantum of water including clearing of slush which may arise out during dewatering including dressing of sides and bed and disposing of all excavated earth up to any leads and lifts, disposed earth to be levelled and nearly dressed as per directions of The Engineer-in-Charge including carriage of materials within all leads, lifts and other incidentals.

Filling in plinth with sand under floors including watering, ramming, consolidating and dressing complete as per HPPWD specification or as directed by Engineer-in-Charge, including carriage of materials with in all leads, lifts and other incidental. The rate including Royality, Malkhana, Octroi, Toll Tax Sales tax, GST or any other taxes imposed by the Government.

Providing form work with steel plates 3.15mm (Three point one five millimeters) thick, welded with angle iron in frame 30x30x5mm (Thirty into Thirty into Five millimeters) so as to give a fair finish including centering, shuttering strutting and propping etc, with wooden battens and ballies, height of propping and centering in all heights. below supporting floor to ceiling and removal of the same for in – situ reinforced concrete and plain concrete work in foundation footings, basis of columns etcetera and mass concrete, including carriage of materials. Within all leads, lifts and other incidentals. The rate including Royality, Malkhana, Octroi, Toll Tax, Sales tax, GST or any other taxes imposed by the Government.

Providing form work with steel plates 3.15mm (Three decimal one five millimeters)thick, welded with angle iron in frame 30x30x5mm (Thirty into Thirty into Five millimeters) so as to give a fair finish including centering, shuttering ,strutting and propping etc, with wooden battens and ballies, heights of propping and centering in all heights below supporting floor to ceiling and removal of the same for in-situ reinforced concrete and plain concrete work in flat surfaces such as soffits of suspended floors, roofs, landings, shelves, and the like floor, etc. up to any thickness, up to all floor level, including carriage materials of within all leads, lifts and other incidentals. The rate including Royality, Malkhana, Octroi, Toll Tax, Sales tax, GST or any other taxes imposed by the Government

Providing form work with steel plates 3.15mm (Three point one five millimeters)thick, welded with angle iron in frame 30x30x5mm (Thirty into Thirty into Five millimeters) so as to give a fair finish including centering, shuttering, strutting and propping etc, with wooden battens and ballies, height of propping and centering in all heights below supporting floor to ceiling and removal of the same for in-situ reinforced concrete and plain concrete work in Columns, pillars, posts and struts, (square, rectangular/polygonal in plan) in any heights/thickness/depths etcetra up to all floor level, including carriage of materials within all leads, lifts and other incidentals. The rate including Royality, Malkhana, Octroi, Toll Tax,Sales tax, GST or any other taxes imposed by the Government.

Providing form work with steel plates 3.15mm (Three decimal one five millimeters)thick, welded with angle iron in frame 30x30x5mm (Thirty into Thirty into Five millimeters) so as to give a fair finish including centering, shuttering, strutting and propping etc, with wooden battens and ballies, heights of propping and centering in all heights below supporting floor to ceiling and removal of the same for in-situ reinforced concrete and plain concrete work in Beams Cantilevrs, Girders and lintels, sides and soffits of beams, beam haunchings, cantilevers,girders, bressumers and lintels etc. up to any thickness/depths up to all floor level, including carriage materials of within all leads, lifts and other incidentals. The rate including Royality, Malkhana, Octroi, Toll Tax, Sales tax, GST or any other taxes imposed by the Government.

Providing form work with steel plates 3.15mm (Three decimal one five millimeters)thick, welded with angle iron in frame 30x30x5mm (Thirty into Thirty into Five millimeters) so as to give a fair finish including centering, shuttering, strutting and propping etc, with wooden battens and ballies, heights of propping and centering in all heights below supporting floor to ceiling and removal of the same for in-situ reinforced concrete and plain concrete work in Stair cases with sloping or stepped soffits upto all floor level excluding landing including carriage materials within all leads, lifts and other incidentals. The rate including Royality, Malkhana, Octroi, Toll Tax, Sales tax, GST or any other taxes imposed by the Government.

Providing form work with steel plates 3.15mm (Three decimal one five millimeters)thick, welded with angle iron in frame 30x30x5mm (Thirty into Thirty into Five millimeters) so as to give a fair finish including centering, shuttering, strutting and propping etc, with wooden battens and ballies, heights of propping and centering in all heights below supporting floor to ceiling and removal of the same for in-situ reinforced concrete and plain concrete work in edges of slabs and breaks in floors and walls of any width, up to all floor level, including carriage materials within all leads, lifts and other incidentals. The rate including Royality, Malkhana, Octroi, Toll Tax, Sales tax, GST or any other taxes imposed by the Government.

Providing form work with steel plates 3.15mm (Three decimal one five millimeters)thick, welded with angle iron in frame 30x30x5mm (Thirty into Thirty into Five millimeters) so as to give a fair finish including centering, shuttering, strutting and propping etc, with wooden battens and ballies, heights of propping and centering in all heights below supporting floor to ceiling and removal of the same for in-situ reinforced concrete and plain concrete work in Vertical surfaces such as walls (any thickness) partition and the like including attached pillasters, buttresses, plinth and string courses and the like, up to all floor level, including carriage materials within all leads, lifts and other incidentals. The rate including Royality, Malkhana, Octroi, Toll Tax, Sales tax, GST or any other taxes imposed by the Government.

Providing and laying mechanically mixed and vibrated cement concrete 1:6:12 (one cement isto six sand isto twelve graded crushed stone aggregate 40mm (forty millimeter) nominal size) and curing complete, excluding the cost of form work in foundation and plinth/under floors in all depths including pumping or bailing out water/dewatering and removal of slush as required at site complete as per HPPWD specifications or as directed by the Engineer-in-Charge including carriage of materials within all leads, lifts and other incidentals. The rate inclusive of Octroi, Toll Tax Sales tax, GST or any other taxes imposed by the Government

Providing and laying mechanically mixed and vibrated cement concrete 1:4:8 (one cement isto four sand isto eight graded crushed stone aggregate 40mm (forty millimeter) nominal size) and curing complete, in or under water, including pumping or bailing out water/dewatering, removal of slush which may arise at the time of laying under water complete excluding the cost of form work in foundation and plinth in all depths/heights as per HPPWD specifications or as directed by the Engineer-in-Charge including carriage of materials within all leads and lifts. The rate inclusive of Octroi, Toll Tax Sales tax, GST or any other taxes imposed by the Government

Providing and laying mechanically mixed and vibrated reinforced cement concrete 1:2:4( one cement: two sand : four graded crushed stone aggregate 20mm (Twenty millimetre) nominal size) of Grade M-20 (Twenty) mix designed to obtain the minimum crushing strength of 20 N (twenty Nuton) per millimeter square with minimum cement contents of 330 kg (three hundred thirty) Killogramme per cubic meter and curing complete excluding the cost of form work and reinforcement for reinforced concrete work in foundation footings, bases of columns etcetera and the like mass concrete complete as per HPPWD specification or as directed by the Engineer-in-Charge including carriage of materials within all leads, lifts and other incidentals. The rate inclusive of Octroi, Toll Tax Sales tax, GST or any other taxes imposed by the Government

Providing and laying mechanically mixed and vibrated reinforced cement concrete 1:2:4( one cement: two sand : four graded crushed stone aggregate 20mm (Twenty millimetre) nominal size) Grade M-20 (Twenty) mix designed to obtain the minimum crushing strength of 20 N (twenty Nuton) per millimeter square with minimum cement contents of 330 Kg (three hundred thirty) Killogramme per cubic meter and curing complete excluding the cost of form work and reinforcement for reinforced concrete work in suspended floors, roofs, landings and shelves and their supports, balconies, beams, girders, bressumers, cantilevers and the like shelves and work tops etcetera upto all floor level complete as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate inclusive of Octroi, Toll Tax Sales tax, GST or any other taxes imposed by the Government

Providing and laying mechanically mixed and vibrated reinforced cement concrete 1:2:4( one cement: two sand : four graded crushed stone aggregate 20mm (Twenty millimetre) nominal size) of Grade M-20 (Twenty) mix designed to obtain the minimum crushing strength of 20 N (twenty Nuton ) per millimeter square with minimum cement contents of 330 Kg (three hundred thirty) Killogramme per cubic meter and curing complete excluding the cost of form work and reinforcement for reinforced concrete work in column, pillars, posts and struts in all depth/thickness etcetera upto all floor level complete as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate inclusive of Octroi, Toll Tax Sales tax, GST or any other taxes imposed by the Government

Providing and laying mechanically mixed and vibrated reinforced cement concrete 1:2:4 ( one cement: two sand : four graded crushed stone aggregate 20mm (Twenty millimetre) nominal size) of Grade M-20 (Twenty) mix designed to obtain the minimum crushing strength of 20 N (twenty Nuton ) per millimeter square with minimum cement contents of 330 Kg (three hundred thirty) Killogramme per cubic meter and curing complete excluding the cost of form work and reinforcement for reinforced concrete work in stair cases (except sprial stair cases) excluding landing but including preparing of top surface and finishing of nosing upto floor all level complete as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate inclusive of Octroi, Toll Tax Sales tax, GST or any other taxes imposed by the Government.

Providing and laying mechanically mixed and vibrated cement concrete 1:3:6 (One cement : three sand : six graded stone aggregate 20mm (twenty milimetres) nominal size) and curing complete excluding the cost of form work, in foundation and plinth in all depths including pumping or bailing out water/ dewatering and removal of slush as required at site complete as per HP:PWD. Specifications or as per the directions of the Engineer-in-Charge and carriage of materials within all leads and lifts and other incidental charges. The rate inclusive of Octroi, Toll Tax Sales tax, GST or any other taxes imposed by the Government.

Providing and laying mechanically mixed and vibrated cement concrete 1:2:4 (one cement isto two sand isto four graded crushed stone aggregate 20mm (twenty millimeter) nominal size) and curing complete, excluding the cost of form work in walls including attached buttresses, pilasters and their caps and basis and string courses etc. upto all floor level as per HPPWD specifications or as directed by the Engineer-in-Charge including carriage of materials within all leads, lifts. The rate inclusive of Octroi, Toll Tax Sales tax, GST or any other taxes imposed by the Government.

Providing and laying mechanically mixed and vibrated cement concrete 1:2:4 (one cement isto two sand isto four graded crushed stone aggregate 40mm (forty millimeter) nominal size) and curing complete, in or under water, including pumping or bailing out water/dewatering, removal of slush which may arise at the time of laying under water complete excluding the cost of form work in foundation and plinth in all depths/heights as per HPPWD specifications or as directed by the Engineer-in-Charge including carriage of materials within all leads and lifts. The rate inclusive of Octroi, Toll Tax Sales tax, GST or any other taxes imposed by the Government.

Providing and laying mechanically mixed and vibrated cement concrete 1:5:10 (one cement isto five sand isto ten graded crushed stone aggregate 40mm (forty millimeter) nominal size) and curing complete, excluding the cost of form work in foundation and plinth/under floors in all depths including pumping or bailing out water/dewatering and removal of slush as required at site complete as per HPPWD specifications or as directed by the Engineer-in-Charge and carriage of materials within all leads, lifts and other incidentals. The rate inclusive of Octroi, Toll Tax Sales tax, GST or any other taxes imposed by the Government.

Providing and laying cement concrete 1:2:4 (One cement : two sand : four graded/crushed stone aggregate 20mm (Twenty milimeter)nominal size ) mixed and vibrated mechanically so as to give a compressive strength corresponding to grade M-20(M-Twenty) in reinforced concrete chajjas of any thickness upto all floor level including finishing the exposed surface with cement mortor 1:3(1 cement : three sand ) to give a smooth and even surface including form work and curing complete excluding the cost of reinforcement upto all floor level including carriage of materials with in all leads and lifts and other incidental. The rate inclusive of Octroi, Toll Tax Sales tax, GST or any other taxes imposed by the Government.

Providing and laying Tor steel/ Mild steel reinforcement for Reinforced Cement Concrete work including bending, binding and placing in position complete including cost of binding wire and other incidentals due for its completion up to all floor level complete as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate inclusive of Octroi, Toll Tax Sales tax, GST or any other taxes imposed by the Government.

Providing and laying Damp proof course 38mm (Thirty eight millimeters) thick with cement concrete 1:2:4(One cement : two sand four graded stone aggregate 12.5mm (Twelve point five milimeters) nominal size and curing complete including carriage of materials with in all leads and lifts and other incidental charges The rate inclusive of Octroi, Toll Tax Sales tax, GST or any other taxes imposed by the Government.

Applying a coat of hot bitumen (Mexphalt 80/100(Eighty/ Hundred) or equivalent using 1.70 kg (One point seventy kilogramme) per suqare meter on DPC damp proof course after cleaning the surface with a piece of cloth lightly soaked in kerosene oil including carriage of materials with in all leads and lifts and other incidental charges. The rate inclusive of Octroi, Toll Tax Sales tax, GST or any other taxes imposed by the Government.

Providing in reinforced cement concrete work smooth finishing of the exposed surfaces with cement mortar 1:3 (one cement isto three sand) complete upto all floor level complete as per HPPWD specifications or as directed by the Engineer-in-Charge including carriage of materials within all leads, lifts and other incidentals. The rate inclusive of Malkhana, Royality, Octroi, toll tax, Sale tax, GST or any taxes imposed by the Government.

Brick work using Second class common burnt clay buildings bricks in cement mortor 1 : 6 (one cement isto six sand) in Foundation and Plinth complete as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate inclusive of Royality, Malkhana, Octroi, Toll Tax Sales tax, GST or any other taxes imposed by the Government.

Brick work using Second class common burnt clay buildings bricks in cement mortor 1 : 6 (one cement isto six sand) in super structure above plinth level complete as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate inclusive of Royality, Malkhana, Octroi, Toll Tax Sales tax, GST or any other taxes imposed by the Government.

Second class half brick masonry using common brunt clay building bricks in super structure above plinth level up to all heights / floor level in cement mortor 1 : 4 ( 1 cement : 4 sand) as per HPPWD specifications or as directed by the Engineer-in-Charge, including curing complete and carriage of materials within all leads, lifts and other incidental. The rate inclusive of Royality, Malkhana, Octroi, Toll Tax Sales tax, GST or any other taxes imposed by the Government

Providing 2nd class deodar wood work in frames of doors, windows, clerestory, windows and other frames wrought, framed and fixed in position as per HPPWD specifications or as directed by the Engineer-in-Charge, including curing complete and carriage of materials within all leads, lifts and other incidental. The rate inclusive of Royality, Malkhana, Octroi, Toll Tax Sales tax, GST or any other taxes imposed by the Government

Providing and fixing factory made 12mm (Twelve milimetres) thick prelaminated board ISI marked No. 1003 both side bwp phenol bounded exterior/interior grade panelled shutters with 40mm (Forty millimetre) thick frame of Ist class deodar wood for doors including bright finished/black enamelled iron butt hinges with necessary screws including carriage of materials with in all leads and lifts and other incidental charges. The rate inclusive of Royality, Malkhana, Octroi, Toll Tax Sales tax, GST or any other taxes imposed by the Government

Providing and fixing 2nd class deodar wood paneled and glazed shutters for doors, windows and clerestory windows including black enameled iron butt hinges with necessary screws 40mm (forty millimeter) thick as per HPPWD specifications or as directed by the Engineer-in-Charge, including curing complete and carriage of materials within all leads, lifts and other incidental. The rate inclusive of Royality, Malkhana, Octroi, Toll Tax Sales tax, GST or any other taxes imposed by the Government

Providing and fixing 40mm (Forty millimetres) thick second class deodar wood wire gauge shutters using galvanized M.S. wire gauge of I.S. gauge designation 85G (eighty five galvanized) with wire of dia 0.56mm (Zero decimal five six millimetres) for doors, windows and clerestory windows including bright finished black enamelled iron butt hinges with necessary screws, including carriage of materials within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, sale tax, malkana, GST and all other taxes as imposed by the Government.

Providing and fixing 19mm (Ninteen millimeter) thick water proof commercial boards with hard wood edging shutters for cup boards including fixing with nickel plated piano hinges with screw etcetra complete as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate inclusive of Royality, Malkhana, Octroi, Toll Tax, Sales tax, GST or any other taxes imposed by the Government

Providing and fixing plain M.S. grills of required patterns in wooden/steel frames of window etc. with M.S. flat, square or round bars, bolts and nuts or screws including welding with frame complete as per HPPWD specifications or as directed by the Engineer-in-Charge, including applying a priming coat of red lead paint after pretreatment of the surface and carriage of materials within all leads, lifts and other incidentals. The rate inclusive Octroi, Toll Tax Sales tax or any other taxes imposed by the Government.

Providing 40x3mm (forty into three millimeter) flat iron hold fast 40cm. (forty centimeter) long including fixing to frame with 10mm (ten millimeter) diameter bolts & nuts and wooden plugs and embeding in cement concrete block 30x10x15cm.( thirty into ten into fifteen centimeter) 1:3:6 (One cement : three sand : six graded stone aggregate 20mm (twenty millimeter) nominal size) as per HPPWD specifications or as directed by the Engineer-in-Charge, including applying a priming coat of red lead paint after pretreatment of the surface and carriage of materials within all leads, lifts and other incidentals. The rate inclusive Octroi, Toll Tax Sales tax, GST or any other taxes imposed by the Government.

Providing and fixing 300x16mm ( three hundred into sixteen millimeter) nominal size anodized aluminium sliding door bolts anodized transparent or dyed to required colour and shade with necessary bolts, nuts and screws etcetera complete as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate inclusive of octroi, toll tax, sale tax, GST or any taxes imposed by the Government

Providing and fixing 250x16mm ( two hundred into sixteen millimeter) nominal size anodized aluminium sliding door bolts anodized transparent or dyed to required colour and shade with necessary bolts, nuts and screws etcetera complete as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate inclusive of octroi, toll tax, sale tax, GST or any taxes imposed by the Government

Providing and fixing 200x10mm (two hundred into ten millimeter) nominal size aluminium tower bolts (Barrel type) anodized transparent or dyed to required colour and shade with screws etc. complete as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate inclusive of octroi, toll tax, sale tax, GST or any taxes imposed by the Government

Providing and fixing 150x10mm (one hundred into ten millimeter) nominal size aluminium tower bolts (Barrel type) anodized transparent or dyed to required colour and shade with screws etc. complete as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate inclusive of octroi, toll tax, sale tax, GST or any taxes imposed by the Government

Providing and fixing 125mm (One hundred twenty five milimetres) aluminium handles anodized transparent or dyed to required colour and shade with necessary screws etcetera complete as per the directions of the Engineer-in-Charge, including carriage of materials, within all leads, lifts of materials and other incidental Charges. The rate includes, royality charges, octroi, sale tax, malkana. GST and all other taxes as imposed by the Government.

Providing and fixing 100mm (One hundred milimetres) aluminium handles anodized transparent or dyed to required colour and shade with necessary screws etcetera complete as per the directions of the Engineer-in-Charge, including carriage of materials, within all leads, lifts of materials and other incidental Charges. The rate includes, royality charges, octroi, sale tax, malkana, GST and all other taxes as imposed by the Government.

Providing and fixing 200mm (two hundred millimeter) M.S. hooks and eyes as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate inclusive of Octroi, toll tax, sale tax, GST or any taxes imposed by the Government

Providing and fixing 150mm (one hundred fifty millimeters) oxidised M.S. single acting spring hinges with necessary screws etcetera complete as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate inclusive of Octroi, toll tax, sale tax , GST or any taxes imposed by the Government.

Providing and fixing 12mm (Twelve millimeters) thick and 150mm (One hundred fifty milimeters) wide first class deodar wood pelmet with 25mm (twenty five millimetres) diameter wooden curtain rod and brackets including fixing with 25x3mm (Twenty five into three millimetres) MS flat 10cm (Ten centimeters) long and plugs and necessary screws etcetra complete including carriage of materials with in all leads and lifts and other incidental charges. he rate inclusive of Octroi, toll tax, sale tax , GST or any taxes imposed by the Government.

Providing and fixing 100mm (one hundred millimeters) bright finished brass floor door stopper with rubber cushion and necessary screws etcetera to suit shutter thickness complete as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate inclusive of Octroi, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing and fixing upto all floors level, 20 mm (twenty millimeters) thick acid resistant glazed tiles of size 300x300mm (three hundred into three hundred millimeters) size of approved make (Naveen/Diamand Regina, Johnson and Johnson tiles) and of approved shade, in skirting, risers of steps and dado upto all heights, laid on a bed of 12mm (twelve millimeters) thick cement mortar 1:3 (one cement isto three sand) jointing with neat cement slurry mixed with pigment to match the shade of the tiles, including carriage of materials within all leads, lifts of materials and other incidental. The rate inclusive of Octroi, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing and fixing 20 mm (twenty millimeters) thick acid proof/Alkali resistant tiles of size 300x300mm (three hundred into three hundred millimeters) size of specified shade in skirting, or dado and riser of steps upto all heights, laid on a bed of 12mm (twelve millimeters) thick cement mortar 1:3 (one cement isto three sand) jointing with neat cement slurry mixed with pigment to match the shade of the tiles, including carriage of materials within all leads, lifts of materials and other incidental. The rate inclusive of Octroi, toll tax, sale tax, GST or any other taxes imposed by the Government.

Precast cheqqured terrazo tiles hydraulically compressed and polished 20mm (twenty millimeter) thick with marble chips of specified sizes laid in floors, treads of steps and landings on a bed of 25mm (twenty five millimeter) average thickness of cement mortar 1 : 6 (one cement : six sand) jointed with pigment to match the shade of tiles (wherever required) including rubbing and polishing completed with tiles of Silver Grey shade as per HPPWD specification or as directed by the Engineer-in-Charge, The rate inclusive of Octroi, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing and laying pattern finish ceremic (non slippay) tiles in flooring, treads of steps of following sizes (Group v) thickness to be specified by the manufacture Ist quality confirming to IS:13755 of NITCO/KAZARIA make in all colours shade design and prints as specified by the Engineer-in-charge laid on 20mm (twenty millimeter) thick cement mortar 1:4 ( one cement : four sand ) including grouting the joints with white cement and matching pigment etc. 300x300mm (three hundred into three hundred milimetres) size as per HPPWD specification or as directed by the Engineer-in-Charge, The rate inclusive of Octroi, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing and laying upto all floor level White glazed tiles 6mm (six millimeters) thick of approved brand and make (Kajaria/Nitco/Naveen tiles) in skirting, risers of steps and dado for all heights, laid on 12mm (twelve millimeters) thick cement mortar 1:3 (one cement is to three sand) and jointed with white cement slurry complete as per HPPWD specification or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate inclusive of Octroi, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing and laying 20mm (twenty millimeters) thick kesria green/Udaipur pink shade Makrana marble work (table rubbed and polished) in flooring laid over 20mm (twenty millimeters) thick base in cement mortar 1:3 (one cement is to three sand) including jointing with cement mortar 1:2 (one white cement is to two marble dust) with an admixture of pigment to match the shade of marble complete as per HPPWD specifications or as directed by the Engineer-in-Charge, up to all floor level, including carriage of materials within all leads, lifts, and other incidental. The rate inclusive of Octroi, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing and fixing M.S. fan clamp type-I of 16mm (sixteen millimeter) dia mild steel bar bent to shape with hooked ends in R.C.C. slab during laying including painting the exposed portion of loop, all as per standard design complete as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate inclusive of Octroi, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing and Fixing on wall faces 100mm (one hundred millimeter) diameter polyvinyl chloride (D-Plast) rain water pipe of working pressure not less than 4.5kg (four point five kilogramme) per square meter including filling the joints with adhesive of approved make complete as per HPPWD specifications or as directed by the Engineer-in-Charge including carriage of materials within all leads, lifts and other incidental. The rate inclusive of Royality, Malkhana, Octroi, Toll Tax Sales tax or any other taxes imposed by the Government

Providing and fixing on wall faces Poly Vinyl Chloride (D-plast) accessories for rain water pipes including filling the joints with approved adhesive complete as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate inclusive Octroi, Toll Tax Sales tax or any other taxes imposed by the Government. (i) P.V.C. plain bend 100mm (one hundred millimetre) diametre.

Providing and fixing 100 mm (one hundred millimeter) diameter, mild steel Holder Bat clamps of approved design to CI or SCI /PVC pipes embedded in and including cement concrete blocks 10x10x10cm (ten into ten into ten centimeter) of 1:2:4 (one cement isto two sand isto four graded crushed stone aggregate 20mm(twenty millimetre) nominal size) mix including cost of cutting holes and making good the walls complete as per HPPWD specifications or as directed by the Engineer-in-Charge including carriage of materials within all leads, lifts and other incidental. The rate inclusive of Royality, Malkhana, Octroi, Toll Tax Sales tax or any other taxes imposed by the Government.

Providing and fixing 75mm (seventy five millimeter) diameter, mild steel Holder Bat clamps of approved design to CI or SCI /PVC pipes embedded in and including cement concrete blocks 10x10x10cm (ten into ten into ten centimeter) of 1:2:4 (one cement isto two sand isto four graded crushed stone aggregate 20mm(twenty millimetre) nominal size) mix including cost of cutting holes and making good the walls complete as per HPPWD specifications or as directed by the Engineer-in-Charge including carriage of materials within all leads, lifts and other incidental. The rate inclusive of Octroi, toll tax, sale tax, GST or any other taxes imposed by the Government. .

Providing and fixing 85 cm (eighty five centimeter) high railing with mild steel rectangular pipe hand rail 60x40mm (sixty into forty millimeter) ISG-16 (ISG- sixteen) gauge supported with 40mm (forty millimeter) square hollow mild steel tube ballusters ISG-14 (ISG-fourteen) guage at 60cm (sixty centimeter) centre to centre duly welded with 2 Nos (two numbers) mild steel flat 50x5 mm (fifty intot five millimeter) and mild steel lugs lower end embedded in waste of reinforced cement concrete steps including applying a priming coat with steel primer and painting two or more coats with steel enamel paint other than white complete as directed by the Engineer-in-Charge including carriage of materials within all leads, lifts and other incidental. The rate inclusive of Octroi, toll tax, sale tax, GST or any other taxes imposed by the Government.

Steel work welded in built up sections trusses and framed work, including cutting, hoisting fixing in position and applying a priming coat of red lead paint complete in beams joists channels angles, tee, flats with connecting plates or angle cleats as in main and cross beams, hip and jack rafters, purlins connected to common rafters and the like as directed by the Engineer-in-Charge including carriage of materials within all leads, lifts and other incidental. The rate inclusive of Royality, Malkhana, Octroi, Toll Tax Sales tax, GST or any other taxes imposed by the Government.

Painting two or more coats (excluding priming coat) on new steel and other metal surfaces under coat with enamel paint other than white of approved brand and manufacture (Narolac /Asian paints) and of approved shade to give an even shade including cleaning the surface of all dirt, dust and other foreign matter complete as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate inclusive of Royality, Malkhana, Octroi, Toll Tax Sales tax, GST or any other taxes imposed by the Government.

Applying priming coat over new wood and wood based surfaces after and including preparing the surface by thoroughly cleaning, oil, grease, dirt and other foregin matter sand papering and knotting with ready mixed paint brushing wood primer pink of approved brand and manufacture (Narolac/Asian paints) complete as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate inclusive of Royality, Malkhana, Octroi, Toll Tax Sales tax, GST or any other taxes imposed by the Government.

Painting two or more coats (excluding priming coat) on new wood and wood based surfaces with enamel paint other than white of approved brand and manufacture (Narolac/Asian paints) and of approved shade to give an even shade including cleaning the surface of all dirt, dust and other foreign matter complete as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate inclusive of Royality, Malkhana, Octroi, Toll Tax Sales tax, GST or any other taxes imposed by the Government.

6 mm (six millimeter) thick cement plaster to celing with cement mortar 1 : 3 ( 1 cement : 3 sand ) and curing complete upto all heights/ floor level as per HPPWD specification or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. he rate inclusive of Royality, Malkhana, Octroi, Toll Tax Sales tax, GST or any other taxes imposed by the Government.

15 mm (fifteen millimeter) cement plaster with cement mortar 1 : 6 ( 1 cement : 6 sand) in single coat on rough side of brick / concrete / stone walls for interior plastering up to all floor level including arises, internal, rounded angles ,chamfers and / or rounded angles in all girth and finished even and smooth as per HPPWD specification or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate inclusive of Royality, Malkhana, Octroi, Toll Tax Sales tax, GST or any other taxes imposed by the Government.

15 mm (fifteen millimeter) thick cement plaster with cement mortar 1 : 6 ( 1 cement : 6 sand) in single coat on fair side of brick / concrete / stone walls for interior plastering up to all floor level including arises, internal, rounded angles, chamfers and / or rounded angles in all girth and finished even and smooth as per HPPWD specification or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate inclusive of Royality, Malkhana, Octroi, Toll Tax Sales tax, GST or any other taxes imposed by the Government.

15 mm (fifteen millimeter) thick cement plaster with cement mortar 1 : 3 ( one cement : three sand) in single coat on rough side of brick / concrete / stone walls for interior plastering up to all floor level including arises, internal, rounded angles, chamfers and / or rounded angles in all girth and finished even and smooth as per HPPWD specification or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate inclusive of Royality, Malkhana, Octroi, Toll Tax Sales tax, GST or any other taxes imposed by the Government.

Squared rubble masonry ( un-coursed /brought to courses) with hard stone of approved quality in foundation and plinth and curing complete excluding the cost of form work in cement mortar 1:3 ( 1 cement; 3 sand)., including carriage of materials within all leads, lifts and other incidental Charges. The rate inclusive of Royality, Malkhana, Octroi, Toll Tax Sales tax, GST or any other taxes imposed by the Government.

Square rubble masonry ( un-coursed /brought to courses) with hard stone of approved quality in foundation and plinth including raking out joints and curing complete excluding the cost of form work at plinth level in cement mortar 1:5 ( 1 cement; 5 sand). including carriage of materials within all leads, lifts and other incidental Charges. The rate inclusive of Royality, Malkhana, Octroi, Toll Tax Sales tax, GST or any other taxes imposed by the Government.

Distempering (two or more coats) with oil bound washable distemper of approved brand and manufacture and of required shade on undecorated wall surfaces to give an even shade over and including a priming coat with distemper primer of approved brand and manufacture after thoroughly brushing the surface free from mortar dropping and other foreign matter and also including preparing the surface even and sand papered smooth priming coat with distemper primer as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate inclusive of Royality, Malkhana, Octroi, Toll Tax Sales tax, GST or any other taxes imposed by the Government.

White washing with lime on undecorated ceiling and/or sloping roofs (two or more coats) to give an even shade including thoroughly brooming the surface to remove all dirt, dust mortar drops and other foreign matter as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate inclusive of Royality, Malkhana, Octroi, Toll Tax Sales tax, GST or any other taxes imposed by the Government.

Finishing wall with water proofing cement paint of approved brand and manufacture (Nerolac Surksha/Apex exterior) and of approved shade on undecorated wall surfaces (two or more coats) to give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, other foreign matter and sand papered smooth including applying of putty as required for making the surface smooth complete as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate inclusive of Royality, Malkhana, Octroi, Toll Tax Sales tax, GST or any other taxes imposed by the Government.

Finishing wall with water proofing cement paint of approved brand and manufacture and of required shade on decorated wall surfaces (one coat) to give an even shade after thoroughly brushing the surface to remove all dirt,loose or softened paint. as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate inclusive of Royality, Malkhana, Octroi, Toll Tax Sales tax, GST or any other taxes imposed by the Government.

Providing plinth protection 50mm (fifty millimeters )thick in cement concrete 1:3:6 ( one cement; three sand; six graded stone aggregate 20mm(Twenty millimeters) nominal size) including finishing the top surface of concrete smooth as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate inclusive of Octroi, Toll Tax Sales tax or any other taxes imposed by the Government.

Providing under layer for plinth protection of 75mm (seventy five millimeter) thick (unconsolidated) bed of dry brick/stone aggregate 40mm (forty millimeter) nominal size well rammed and consolidated and grouted with fine sand including preparation of ground as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate inclusive of Royality, Malkhana, Octroi, Toll Tax Sales tax, GST or any other taxes imposed by the Government.

Constructing 15x22cm ( Fifteen into twenty two centimetre) U-shape open surface drain with square rubble stone masonary wall in cement mortar 1:6 (one cement: six sand ) and inside plastering with cement mortar 1:3 (one cement: three sand) including earth work and laying ten centimetre cement concrete bed in 1:5:10 (one cement : five sand : ten graded crushed stone aggregate of 40mm (forty milliemeter) nominal size) and 7.5cm (Seven point five centimetre) cement concrete 1:2:4 (one cement : two sand : four graded crushed stone aggregate 20mm (twenty millimeter) nominal size)at bottom joint of drain and finished with a floating coat of neat cement complete as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate inclusive of Royality, Malkhana, Octroi, Toll Tax Sales tax, GST or any other taxes imposed by the Government.

Providing and laying of interlocking concrete block pavements having thickness 60mm ( Sixty millimeters) in grey and coloured shade make over sand base as per drawing and technical specification clause 1504 complete and as per directions of Engineer-in-charge including carriage of materials. The rate inclusive of Royality, Malkhana, Octroi, Toll Tax Sales tax, GST or any other taxes imposed by the Government.

Providing and fixing 110mm (one hundred ten milimeter)nominal size ISI marked high pressure P.V.C. spigot and socket soil waste and ventilating pipes including fixing with approved adhesive as per HPPWD specifications or as directed by the Engineer-in-Charge including carriage of materials within all leads, lifts and other incidental. The rate inclusive of Royality, Malkhana, Octroi, Toll Tax Sales tax, GST or any other taxes imposed by the Government.

Providing and fixing 75mm (seventy five milimeter) nominal size ISI marked high pressure P.V.C. spigot and socket soil waste and ventilating pipes including fixing with approved adhesive as per HPPWD specifications or as directed by the Engineer-in-Charge including carriage of materials within all leads, lifts and other incidental. The rate inclusive of Royality, Malkhana, Octroi, Toll Tax Sales tax, GST or any other taxes imposed by the Government.

Providing and fxing P.V.C. Cowl 100mm (one hundred millimeter) dia of ISI marked including fixing with approved adhesive etc. complete including carriage of materials within all leads and lifts and other incidental charges. The rate inclusive of Royality, Malkhana, Octroi, Toll Tax Sales tax, GST or any other taxes imposed by the Government.

Providing and fixing P.V.C. plain bends of ISI marked including fixing with approved adhesive complete. as specified by the Engineer-in-Charge including carriage of materials within all leads, lifts and other incidental Charges. The rate inclusive of Royality, Malkhana, Octroi, Toll Tax Sales tax, GST or any other taxes imposed by the Government. 100mm (one hundred millimeter) dia.

Providing and fixing P.V.C. plain bends of ISI marked including fixing with approved adhesive complete. as specified by the Engineer-in-Charge including carriage of materials within all leads, lifts and other incidental Charges. The rate inclusive of Royality, Malkhana, Octroi, Toll Tax Sales tax, GST or any other taxes imposed by the Government. 75mm (seventy five millimeter) dia.

Providing and fixing 200mm. (two hundred millimeter) wide cast iron rungs with chequared or ribbed non slip surfaces including fixing in manhole with 200x200x100mm. ( two hundred into two hundred into one hundred millimeter) cement concrete 1:3:6 (one cement: three sand: six graded /crushed stone aggregate 20mm. (twenty millimeter) nominal size) mixed and vibrated mechanically and curing complete excludinmg the cost of form work as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate including Sales tax, Toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing and fixing C.I. cover (medium duty) 500mm (Five hundred milimetres) internal dia metre with frame, weight of cover and frame to be not less than 116.00 kg (One hundred sixteen kilogrammes) including carriage of materials within all leads and lifts and other incidental charges. The rate includes, royality charges, octroi, sale tax, malkana, GST and all other taxes as imposed by the Government.

Providing and fixing 110mm (one hundred ten milimeter) nominal size P.V.C. collars ISI marked including fixing with approved adhesive as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental charges. The rate inclusive of Octroi, Toll Tax Sales tax, GST or any other taxes imposed by the Government.

Providing and fixing 75mm (seventy five milimeter) nominal size P.V.C. collars ISI marked including fixing with approved adhesive as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental charges. The rate inclusive of Octroi, Toll Tax Sales tax, GST or any other taxes imposed by the Government.

Providing and laying crushed stone or brick aggregate 40mm (Forty millimetres) nominal size) in soak pit as per directions of the Engineer-in-Charge, including carriage of materials within all leads, lifts of materials and other incidental Charges. The rate includes, royality charges, octroi, sale tax, malkana, GST and all other taxes as imposed by the Government.

Filling with stones/boulders under floor including watering, ramming, consolidating and dressing complete as per HPPWD specification or as directed by Engineer-in-Charge, including carriage of materials with in all leads, lifts and other incidental. The rate including Royality, Malkhana, Octroi, Toll Tax Sales tax, GST or any other taxes imposed by the Government.

Providing and laying C.I. socket and spigot pipes class-A (Earth work in trenches and jointing of pipes to be measured and paid for separately) 100mm (one hundred millimeter) nominal diameter including carriage of materials within all leads, lifts and other incidental. The rate inclusive of Octroi, Toll Tax Sales tax, GST or any other taxes imposed by the Government.

Providing cast iron detachable joints to asbestos cement pipes and plain ended C.I. specials with collar rubber ring, flanges, bolts and nuts complete including testing of joints 250mm (two hundred fifty) millimeter nominal size including carriage of materials within all leads, lifts and other incidental. The rate inclusive of Octroi, Toll Tax Sales tax, GST or any other taxes imposed by the Government.

Providing and fixing grill jali panel on chamber including carriage of materials within all leads, lifts and other incidental. The rate inclusive of Octroi, Toll Tax Sales tax, GST or any other taxes imposed by the Government.

Providing and fixing HIND WARE/CERA MAKE or its equivalent Orrisa pattren vitreous china water closet squatting pan (Indian type W.C. pan) size 580mm (Five hundred eighty millimeters) (Earth work, bed concrete, foot rest and trap to be measured and paid for separately) including carriage of materials within all leads, lifts and other incidentals. The rate including Sales tax, Toll tax, GST or any other taxes imposed by the Government .

Providing and fixing vitreous China wash down water closet (European Type WC pan) of approved make (HIND WARE/CERAMAKE) and of approved shade, with integral ‘P’ or ‘S’ trap including jointing the trap with soil pipe in cement mortar 1:1 (one cement isto one sand) complete as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate inclusive of Royality, Malkhana, Octroi, Toll Tax Sales tax, GST or any other taxes imposed by the Government.

Providing and fixing ISI marked sand cast iron 100mm ( one Hundred millimeters) size “P” or “S” trap for water closet (squatting pan) including jointing the trap with pan and soil pipe in cement mortar 1:1 (one cement: one sand), complete as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate inclusive of Octroi, Toll Tax, Sales tax, GST or any other taxes imposed by the Government.

Providing and fixing flat back 630 x 450 mm (six hundred thirty into four hundred fifty millimeter) size vitreous china wash basin with single hole for pillar tap with C.I. or M.S. brackets painted white including cutting holes and making good the same but excluding the cost of fitting as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate inclusive of Octroi, Toll Tax Sales tax, GST or any other taxes imposed by the Government.

Providing and fixing 10/12.50/15 liters (ten/twelve point five zero/fifteen litres) P.V.C. low level flushing cistern with a pair of C.I. or mild steel brackets complete with fittings such as lead valve less syphon 15 mm (fifteen millimeter) dia brass ball valve with polythene float, C.P brass handle, unions and couplings for connection with inlet, outlet and overflow pipes, 40mm (forty millimeter) dia including PVC flush bend and cutting holes in walls and making good the same and connecting the flush bend with cistern and closet as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate inclusive of Octroi, Toll Tax Sales tax, GST or any other taxes imposed by the Government.

Providing and fixing 600x450mm (Six hundred into four hundred fifty millimeters) bevelled edge mirror of superior glass (atultuff or equivalent make) mounted on 6mm (Six millimeters) thick A.C. sheet or plywood sheet and fixed to wooden plugs with C.P. brass screws and washers complete as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate including Sales tax, Toll tax, GST or any other taxes imposed by the Government

Providing and fixing plastic seat (solid / Hollow type) and cover for wash down water closet with CP brass hinges and rubbr buffers :- white plastic hollow type as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate including Sales tax, Toll tax, GST or any other taxes imposed by the Government.

Providing and fixing 650 x 450 x 150 mm (six hundred fifty into four hundred fifty into one hundred fifty millimeter) size vitreous china lab sink of approved standard ISI make with C.I. or M.S brackets painted white including cutting holes and making good the same but excluding the cost of fitting as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate inclusive of Octroi, Toll Tax Sales tax, GST or any other taxes imposed by the Government.

Providing and fixing 32mm (thirty two millimeter) diameter C.P. brass waste for wash basin or sink as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate inclusive of Octroi, Toll Tax Sales tax, GST or any other taxes imposed by the Government.

Providing and fixing 32mm (thirty two millimeter) diameter lead waste pipe for wash basin or sink including brass check nut as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate inclusive of Octroi, Toll Tax Sales tax, GST or any other taxes imposed by the Government.

Providing and fixing 32mm (thirty two millimeter) diameter M.I. union for wash basin or sink as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate inclusive of Octroi, Toll Tax Sales tax, GST or any other taxes imposed by the Government.

Providing and fixing chromium plated brass soap dish with C.P. brass bracket fixed to wooden cleats with C.P. brass screws complete as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate including Sales tax, Toll tax, GST or any other taxes imposed by the Government.

Providing and fixing 600x20mm (six hundred into twenty millimeters) C.P. brass towel rail of approved brand and manufacture (HINDWARE/CERAMAKE) complete with C.P. brass brackets fixed to wooden plugs with C.P. brass screws complete as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate including Sales tax, Toll tax, GST or any other taxes imposed by the Government.

Providing and fixing 600x120mm (six hundred into one hundred twenty millimeters) glass shelf with C.P. brass brackets and guard rail complete fixed to wooden plugs with C.P. brass screws complete as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate including Sales tax, Toll tax, GST or any other taxes imposed by the Government.

Providing and fixing brass full way valve with wheel 15mm (fifteen milimeter)dia. without nuts and pipe complete as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate including Sales tax, Toll tax, GST or any other taxes imposed by the Government.

Providing and fixing brass full way valve with wheel 20mm (twenty milimeter)dia. without nuts and pipe complete as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate including Sales tax, Toll tax, GST or any other taxes imposed by the Government.

Providing and fixing 15mm (fifteen millimeter) dia C.P. brass bib tap with capstan head as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate including Sales tax, Toll tax, GST or any other taxes imposed by the Government.

Providing and fixing two hooks basin mixing (for wash basin) as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate including Sales tax, Toll tax, GST or any other taxes imposed by the Government.

Providing and fixing 15mm (fifteen millimeter) diameter C.P. brass pillar tap with capstan head as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate including Sales tax, Toll tax, GST or any other taxes imposed by the Government.

Providing and fixing 15mm (fifteen millimeter) diameter C.P. brass angle valve without nuts and pipe complee as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate including Sales tax, Toll tax, GST or any other taxes imposed by the Government.

Providing and fixing 45cm (forty five centimeter) long and 15mm (fifteen milimeter) nominal bore C.P.connection pipe with brass union as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate including Sales tax, Toll tax, GST or any other taxes imposed by the Government.

Providing and fixing 15mm (fifteen milimeter) nominal bore/diameter to wall, ceiling and floor galvanised mild steel tubes (medium grade) tube fitting and clamps including making good the wall, ceiling and floors as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate inclusive of Octroi, Toll Tax Sales tax, GST or any other taxes imposed by the Government.

Providing and fixing 20mm (twenty milimeter) nominal bore/diameter to wall, ceiling and floor galvanised mild steel tubes (medium grade) tube fitting and clamps including making good the wall, ceiling and floors as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate inclusive of Octroi, Toll Tax Sales tax, GST or any other taxes imposed by the Government.

Providing and fixing 75mm (seventy five milimeter) nominal size P.V.C. door bend with oval access door insertion rubber washer 3mm (three millimeter) thick bolts and nuts complete including fixing with approved adesive as per HPPWD specifications or as directed by the Engineer-in-Charge including carriage of materials within all leads, lifts and other incidental. The rate inclusive of Octroi, Toll Tax Sales tax, GST or any other taxes imposed by the Government.

Providing and fixing 110mm (one hundred ten milimeter)nominal size P.V.C. door bend with oval access door insertion rubber washer 3mm (three millimeter) thick bolts and nuts complete including fixing with approved adesive as per HPPWD specifications or as directed by the Engineer-in-Charge including carriage of materials within all leads, lifts and other incidental. The rate inclusive of Octroi, Toll Tax Sales tax, GST or any other taxes imposed by the Government.

Providing and fixing PVC single equal branch with oval access door ISI marked insertion rubber washers 3mm thick bolts and nuts complete including fixing with approved adhesive etc. complete including carriage of materials within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, sale tax, malkana, GST and all other taxes as imposed by the Government 75mm (seventy five millimeter) dia.

Providing and fixing PVC single equal branch with oval access door ISI marked insertion rubber washers 3mm thick bolts and nuts complete including fixing with approved adhesive etc. complete including carriage of materials within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, sale tax, malkana, GST and all other taxes as imposed by the Government 110mm (one hundred ten millimeter) dia.

Providing and fixing 100mm (one hundred millimeter) dia meter sand cast iron grating for gully, floor or nahni trap complete as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate inclusive of Octroi, Toll Tax Sales tax, GST or any other taxes imposed by the Government.

Providing and fixing 100mm (one hundred millimetre) nominal diameter cast iron floor trap of self cleaning design with sand cast iron screw down or hinged grating with or without vent arm complete including cost of cutting and making good the walls and floors complete as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate inclusive of Octroi, Toll Tax Sales tax, GST or any other taxes imposed by the Government.

Providing and placing three layered PVC water storage tank of sintex or equivalent make and of having capacity of 1000 (One thousand) litres with necessary fittings including over flow pipe, ball valve,scour pipe with polythene float valve mosquitos proof PVC cover with locking arrangment including providing pads of sizes as required for inlet and outlet complete in all respect as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate inclusive of Octroi, Toll Tax Sales tax, GST or any other taxes imposed by the Government.

Making connection of galvanised Mild Steel tube distribution branch with galvanised Mild Steel main 20mm to 40mm (twenty millimeter to forty millimeter) nominal bore by providing and fixing tee including cutting and threading the pipe complete as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate inclusive of Octroi, Toll Tax Sales tax, GST or any other taxes imposed by the Government.

Providing and fixing C.P. brass Jet Marc/Jar & Jaguar with connection pipe and other fitting for (European type) W.C. pan complete as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate inclusive of Octroi, Toll Tax Sales tax, GST or any other taxes imposed by the Government.

Providing and fixing stone ware gully trap grade ‘A’ complete with C.I. grating and brick masonry chamber in cement mortar 1:5 (One Cement: five Sand) and water tight cast iron cover with frame of 300 mm x 300 mm ( Three hundred millimeter into three hundred millimeter) size (inside) the weight of cover to be not less than 4.53 Kg (four point five three kilogramme) and frame to be not less than 2.72 Kg ( Two point seven two kilogramme) square mouth trap 150x100mm (one hundred fifty into one hundred millimeter) size P or R type complete as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate including Sales tax, Toll tax, GST or any other taxes imposed by the Government.

Constructing manhole with RCC top slab in cement concrete 1:2:4 ( one cement; two sand; four graded stone aggregate 20mm (Twenty millimeter) nominal size) mix foundation concrete 1:4:8 (one cement; four sand, eight graded stone aggregate 40mm (forty millimeter) nominal size) in side plastering 15mm (fifteen millimeter ) thick with cement mortar 1:3 (one cement; three sand) finished with a floating coat of neat cement and making channels in cement concrete 1:2:4 ( one cement ; two sand; four graded stone aggregate 20mm (twenty millimeter) nominal size) finished smooth complete including curing and testing. i) Inside size 800x800 mm (eight hundred into eight hundred millimeter) and 500mm (five hundred millimeter) deep including C.I. cover with frame (light duty single seal patern-I) 455x610 mm (four hundred fifty five into six hundred ten millimeter) internal diamensions, total weight of cover and frame to be not less than 38 kg. (thirty eight kilogramme) ( weight of cover 23 kg. (twenty three kilogramme) and weight of frame 15kgs.(fifteen kilogramme) with 200mm (two hundred millimeter) thick walls of brick masonary using common burnt clay building bricks of approved quality in cement mortor 1:3 ( 1 cement : 3 sand) as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate including Sales tax, Toll tax, GST or any other taxes imposed by the Government.

Constructing manhole with RCC top slab in cement concrete 1:2:4 ( one cement; two sand; four graded stone aggregate 20mm (Twenty millimeter) nominal size) mix foundation concrete 1:4:8 (one cement; four sand, eight graded stone aggregate 40mm (forty millimeter) nominal size) in side plastering 15mm (fifteen millimeter ) thick with cement mortar 1:3 (one cement; three sand) finished with a floating coat of neat cement and making channels in cement concrete 1:2:4 ( one cement ; two sand; four graded stone aggregate 20mm (twenty millimeter) nominal size) finished smooth complete including curing and testing. ii) inside size 800 x 800mm (eight hundred into eight hundred millimeter ) and upto any depth including C.I. cover with frame (light duty single seal pattern-I) 455 x610mm (Four hundred fifty five into six hundred ten millimeter) internal diamensions total weight of cover and frame to be not less than 38 Kg (Thirty eight kilogramme) (Weight of cover 23 Kg (Twenty three kilogramme) and weight of frame 15 Kg (Fifteen kilogramme) with 200mm (Two hundred millimeter) thick walls of brick masonry using common brunt clay building bricks in cement mortar 1:3 (One Cement : three Sand) as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate including Sales tax, Toll tax, GST or any other taxes imposed by the Government.

Construction of brick masonry chambers for under ground C.I. inspection chamber and bends with second class common burnt clay building bricks in cement mortar 1:5 (one cement; five sand) C.I. cover with frame (light duty) 355mm x 610mm( three hundred fifty five millimeter into six hundred ten millimeter) internal diamensions total weight of cover and frame to be not less then 38 kg. (thirty eight kilogramme) (weight of cover 23kg. (twenty three kilogramme) and weight of frame 15 kg. (fifteen kilogramme) with RCC top slab with cement concrete 1:2:4 ( one cement; two sand; four graded stone aggregate 20mm (twenty millimeter ) nominal size) foundation concrete 1:5:10 ( one cement : five sand : ten graded stone agg. 40mm (forty millimeter) nominal size) inside plaster 15mm(fifteen millimeter) thick with cement mortar 1:3 ( 1 cement : 3 sand ) finished smooth with a floating coat of neat cement on walls and bed concrete inside dimensions 455x610x450mm( four hundred fifty five into six hundred ten into four hundred fifty millimeter) deep single pipe line complete as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate including Sales tax, Toll tax, GST or any other taxes imposed by the Government.

Providing and laying in trenches galvanised mild steel tubes (medium grade) tube fitting 15mm (Fifteen millimeter) nominal bore (Earth work in trenches to be measured and paid for separately) as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate inclusive of Octroi, Toll Tax Sales tax, GST or any other taxes imposed by the Government.

Providing and laying (to level or slope) and jointed with stiff mixture of cement mortar in proportion of 1 : 1 (one cement : one sand) salt glaze stone ware pipe grade ‘A’ complete of 150 mm (one hundred fifty millimeter) internal diameter including testing of pipes and jointing complete as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate including Sales tax, Toll tax, GST or any other taxes imposed by the Government.

Providing and laying cement concrete 1:4:8 ( one cement : four sand : eight graded / crushed stone aggregate 40mm (forty millimeter) nominal size) bedding for stoneware pipes of the following internal diameter including necessary form work and curing complete 150mm (one hundreed fifty millimeter) dia meter as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate including Sales tax, Toll tax, GST or any other taxes imposed by the Government.

KULWANT SINGH

ARUN KUMAR

SUKHBIR SINGH