Painting to steel furniture and polishing to wooden furniture and misc repair wks under GE Dehradun.

Amount

Material and Labour for polishing of following furniture items including scrapping of rough surface and old worn out polished layer with scrapper /sand paper for smoothing the surface and polishing the same with of approved quality french polish to glossy finish :-

Chair Dining FD-279/203/16/262

Chair Writing FD/20/202/250/280

Chair Easy FD-229/201/17

Chair dining officer

Chair WBB FD-26/225/285

Bed Hard FD-246/245/247

Sofa Set 4 Seater FD-281

Sofa Set 5 Seater FD-281

Stool Dressing FD/MAP/14

Table Dressing Ladies FD/MAP/07

Table Bed Side FD-213

Table 3 x 3 FD-223

Table officer FD- 33(m)

Side Board FD-241/26

Bin Soiled Linen FD-244/15(m)/212

Table Dressing Gents FD-230/231

Table Writing FD-249/275/33(m)

Teapoy FD-232/278

Table Centre FD-235/274

Table Peg FD-236/277

Table Dining 6 Persons FD-273/329

Table Dining 8 Persons FD-273/329

Table 3'x2' with out drawer FD-231/223/284

Table 3'x2' with drawers FD-231/223/283/284

Table dining 1200x900 FD/MAP-II/03

M&L for Spray painting with two coat of synthetic enamel Paint of smoke grey colour on old painted surface with high class finish including necessary scrapping, denting and to smoothen the surface by cleaning, removing of old paint marks etc, rubbing with sand paper, filling gaps/ holes/ bore holes etc with paste filler to under mentioned items complete all as specified and directed by Engr-in-charge/GE :-

Rack adjustable steel 6 tier 3 side open type

Rack adjustable steel 6 tier 3 side closed type

Bed stand Iron hosptal

Trestle Store room

Chair CB Steel

Chair CBA Steel

Chair Invalid wheelly folding type

Table office clk Type-I

Table office officer steel

Table center steel two tier

Table Hav OR's steel

Table steel top folding

Table 1500mm x 750mm x 850mm steel

Table invalid steel

Chair Folding tubler

Side Rack 3/4Spaces steel

Screen Movable Steel

M&L for Spray painting with 02 coats of synthetic enamel paint of silver metallic colour (outer side) and OG/Smoke gray colour paint (inner side) on old painted surface with high class finish, including necessary scrapping, denting, smoothening the surface by cleaning, removing of old paint marks etc, rubbing with sand paper, filling gaps/holes /bore holes etc with paste filler to under mentioned items complete all as specified & directed :-

Almirah large steel with shelves and Almirah half hanging & half shelves (Complete internal and external surface)

Almirah medium steel with shelves and Almirah steel small half hanging & half shelves (Complete internal and external surface)

M&L for Spray painting with two coats of synthetic enamel paint of smoke grey colour on old painted surface with high class finish including necessary scrapping, denting and to smoothening the surface by cleaning, removing of old paint marks etc, rubbing with sand paper, filling gaps/ holes/ bore holes etc with paste filler to under mentioned items complete all as specified and directed by Engr-in-charge/GE :-

Book Shelf open small/Large steel/Book case steel/cabinet Map steel (Complete internal and external surface)

Locker SKD 562 (Complete internal and external surface).

Locker bed side steel (Complete internal and external surface).

Table dining OR’s steel/Table 1520x860x760mm steel (Complete internal and external surface)

Table table 3x2 with & without drawers steel and Table 3'x3' steel (Complete internal and external surface)

M&L for Spray painting with two coat of synthetic enamel paint of black colour on old painted surface with high class finish including necessary scrapping, denting & to smoothening the surface by cleaning, removing of old paint marks etc, rubbing with sand paper, filling gaps/ holes/bore holes etc with paste filler to under mentioned items complete all as specified & directed by Engr-in-charge :-

Rack shoes steel

FMN/MNF/MNI Set

Charpoy Folding IP

Ladder for Loft Steel

Chair CBA Special with hand rest

Repair to Chair executive revolving Type-I HFD-2047

Removing of existing seat of chair complete and M & L Tapestry/Fabric cloth over synthetic foam 25mm thick (as approved) for seat of chair executive revolving and seat 12mm hot pressed plywood and PVC beading around the seat complete all as specified and as directed.

Removing of existing back of chair complete and M & L Tapestry/Fabric cloth over sythetic foam 25mm thick (as approved) for back of chair executive revolving and back 12mm hot pressed plywood and PVC beading around the back complete all as specified and as directed.

Removing of existing unserviceable caster wheels and S&F suitable caster wheels of existing shape & size complete to match the original as shown on drawings as directed with suitable nuts & bolts to chair revolving steel of various types.

Removing of existing unserviceable bottom base and S&F suitable bottom base made out of stainless steel of existing shape & size complete to match the original as shown on drawings as directed with suitable nuts & bolts to chair revolving steel of various types.

Removing of existing unserviceable Hydraulic system and S&F suitable Hydraulic system of existing shape & size complete to match the original as shown on drawings as directed to chair revolving steel of various types

Removing of existing unserviceable Hand rest and S&F suitable Hand rest of rubberised PVC of existing shape & size complete to match the original as shown on drawings as directed with suitable nuts & bolts to chair revolving steel of various types. Note :- (i) Cost of minor repair like welding to frame if required etc is deemed to be included in the quoted rate. (ii) Cost of all type nut bolts and screws and painting including PVC beading around the seat & back of the chair to be included in the quoted rate.

Repair to Chair CB Steel without arms cushioned seat and back HFD-2044

Removing of existing seat of chair complete and S & F Tapestry/Fabric cloth over sythetic foam 25mm thick (as approved) for seat of chair CB w/o arms and seat 12mm hot pressed plywood and PVC beading around the seat complete all as specified and as directed.

Removing of existing back of chair complete and S & F Tapestry/Fabric cloth over sythetic foam 25mm thick (as approved) for back of chair CB w/o arms and back 12mm hot pressed plywood and PVC beading around the back complete all as specified and as directed. Note :- (i) Cost of minor repair like welding to frame if required etc is deemed to be included in the quoted rate. (ii) Cost of all type nut bolts and screws and painting including PVC beading around the seat & back of the chair to be included in the quoted rate.

Repair to Chair Easy steel FD-121 (M)

Removing old unserviceable seat and S & F new seat made out of 12 mm thick plywood both side commercial upholstered with foam 32 density into 75 mm thick covered with leatherite raxian cloath of approved best quality to be fitted with MS screw with nut and bolts of required size of seat of 560 mm x 635 mm complete all as specified and directed.

Removing old unserviceable back and S & F new back made out of 12 mm thick plywood both side commercial upholstered with foam 32 density into 75 mm thick covered with leatherite raxian cloath of approved best quality to be fitted with MS screw with nut and bolts of required size of seat of 560 mm x 635 mm complete all as specified and directed.

M & L gas welding to chair easy steel frame where required by continuous welding around the broken joints and including painting with one coat of synthetic enamel paint black after preparation of old paint surface and also providing 04 nos new hard rubber shoes to each chair complete all as specified and directed. Note:- (i) Cost of leatherite raxian cloth approved by GE/ Engineer-in-Charge, shall be in the range of Rs 150/- to Rs170/- approx per meter.

Repair to Couch Examination HFD-2019

Removing of old foam leatherite raxion from couch examination and provision of new 50 mm thick synthetic foam of 32 density (Make-Sleepwell/Kurlon) and covering of foam with leatherite raxion of best quality complete all as per drawing and as specified and directed by the Engineer-in-Charge. Note:- (i) Cost of all type screw, pvc shoe and steel surface painting of one coat synthetic enamel paint (White)of couch examination shall deemed to be included in the quoted rate. (ii) Cost of leatherite raxian cloth approved by GE/ Engineer-in-Charge, shall be in the range of Rs 150/- to Rs 170/- approx per meter.

Repair to Chair CB Steel with arms cushioned seat and back HFD-2044

Removing of existing seat of chair complete and S & F Tapestry/Fabric cloth over sythetic foam 25mm thick (as approved) for seat of Chair CB Steel with arms cushioned seat and seat 12mm hot pressed plywood and PVC beading around the seat complete all as specified and as directed by Engineer-in-Charge.

Removing of existing back of chair complete and S & F Tapestry/Fabric cloth over sythetic foam 25mm thick (as approved) for back of Chair CB Steel with arms cushioned back and chair back 12mm hot pressed plywood and PVC beading around the seat complete all as specified and as directed by Engineer-in-Charge.

Removing of old unservicable arms and supply & fixing new arms of existing shape and size made out of seasoned hard wood (Shisham) and covered with foam & cushioned as per directed by Engr-in-charge. Note :-(i) Cost of minor repair like welding to frame if required etc is deemed to be included in the quoted rate. (ii) Cost of all type nut bolts and screws and painting including PVC beading around the seat & back of the chair to be included in the quoted rate.

Repair to Chair CBA Steel children HFD-2046

Removing old unserviceable one piece pvc seat and back of chair CBA Steel children and in lieu providing new one piece pvc seat and back including cushion seat with rexion cloth of chair as per specified in drawing with fixing material complete all as specified and as directed.

Removing old unserviceable arms of chair and supply & fixing arms IInd class hardwood duly covered with 15mm foam with rexion cloth complete and including welding of steel frame the broken joints also painting with one coat of synthetic enamel paint shade black & providing four nos new hard rubber shoes to each chair complete all as specified and directed.

Repair to Cabinet Filling size of (914x463x985mm) 3 compartment HFD-2038

Taking out old u/s drawers from the cabinet filling and refixing the same after repair by proper welding denting and making the same proper functioning and S & F drawer channel with rolling wheel complete all as specified.

S & F in replacement of unserviceable drawer both side lock with new lock size of 40 mm, 4 lever ISI marked with duplicate key complete all as specified.

M & L gas welding to cabinet filling frame where required by continuous welding around the broken joints and including painting steel surface of the cabinet complete by sprey painting of synthetic enamel paint OG shade and preparation of steel surfaces (Priming with red oxide primer shall be done wherever welding is carried out for the broken joints and also replacement of old unserviceable required part and filler coat appliers after preparation of old paint surface complete all as specified and directed.

Repair to Desk stand for lecture steel HFD-1022

S & F in replacement 18MM thick pre-laminated MDF board front side runner of existing shown on drawing with 4MM thick teak wood beading shall be provided all round all as specified in drawing and directed. including tightening with screw other member of the desk stand lecture steel complete and all as specified shown on drawing

S&F in replacement 18MM thick pre-laminated MDF board side runner of existing shown on drawing with 4MM thick teak wood beading shall be provided all round all as specified in drawing and directed.

S&F in replacement 18MM thick pre-laminated MDF board top front runner of existing shown on drawing with 4MM thick teak wood beading shall be provided all round all as specified in drawing and directed.

S&F in replacement 18MM thick pre-laminated MDF board top side runner of existing shown on drawing with 4MM thick teak wood beading shall be provided all round all as specified in drawing and directed.

S&F in replacement 18MM thick pre-laminated MDF board shelves existing desk stand shape and size shown on drawing with 4MM thick teak wood beading shall be provided all round all as specified in drawing and directed

Repair to Screen movable with cloth HFD-2015

Removing all unserviceable green cloth and both side hook spring set of three to screen movable and supply and fix new green cloth of ( approved best quality) with suitable size spring including minor repair like welding, painting to frame and wheels repair complete all as specified and as shown on drawing as directed.

Repair to Table bed side steel Type-II HFD-2005

S &F in replacement of unserviceable knob 25mm and PVC Shoe with new aluminium anodized knob 25mm and PVC hard shoe of best quality including minor repair like welding and painting to steel surface of the table with one coat of synthetic enamel paint by spray gun of whitte shade after preparation of old painted surface, complete all as specified and as directed.

Repair to Trolly solid linen receiver steel HFD-2013

S & F in replacement of unserviceable cloth for trolly solid linean & lid cloth with new cloth (As approved) best quality including minor repair like welding,lifting nut & bolt, wheels and painting if required, complete all as specified & as directed.

Repair to Table office clerk steel Type-II HFD-2051

S & F in replacement of existing unserviceable Table top with new Table top made of 18 mm thick pre- laminated MDF Board with 4 mm thick, half round teak wood edging shall be provided all around and fixed to frame with screws complete. All exposed surfaces of wood work shall be treated with French Polish high gloss best quality and included electric welding of loose components by continuous welding around the broken joints , complete all as specified and as shown on drawing.

Repair to drawer/ shutter of the table by removing deep dents, welding of broken joints etc. complete all as specified.

S & F in replacement of unserviceavle lock with new lock size of 40 mm , 4 lever ISI marked with duplicate key complete all as specified.

S & F in replacement of unserviceable PVC shoe with new PVC shoe of best quality complete all as specified.

M&L for painting to steel and iron surface of table with one coat of synthetic enamel paint by spray gun of olive green shade after preparation of old surface ,complete all as specified.

Repair to Table centre two tier steel HFD-2040

S & F in replacement of existing unserviceable glass table top with new glass table top size of 800X550X10MM thick with rubber buffers and PVC shoe including minor repair welding and painting to steel surface of the table with one coat of synthetic enamel paint by spray ganof black shade after preparation of old painted surface, complete all as specified and as directed.

Repair to Chair Easy wooden cushion seat and back HFD-2034

S&F in replacement of seat cushioned 75 mm thick size of 700X500mm made of cool foam (Make : Sleepwell/ kurlon ) of 32 density duly covered with well finished best quality tapestry cloth not less than Rs 250/- Per meter, shade and quality shall be approved by Engr-in- charge/GE.

S&F in replacement of back cushioned 75 mm thick size of 560X500mm made of cool foam (Make : Sleepwell/ kurlon ) of 32 density duly covered with well finished best quality tapestry cloth not less than Rs 250/- Per meter ,shade and quality shall be approved by Engr-in- charge/GE.

S&F in replacement of front & back moulded round type shape legs made of well seasoned sheesham wood duly planed/smoothened after taking out the old unserviceable front and back legs.

S&F in replacement of old u/s front & back rail of existing shape and size made of shisham wood as directed by Engr-in-charge.

S&F in replacement of old u/s side rail of existing shape & size made of shisham wood as directed by Engr-in-charge.

M&L for polishing all new and old surface with two caots of french polish after preparation of surface ,complete all as specified.

Repair to Side rack wooden with glass HFD-2042

S&F in replacement 18mm thick pre laminated MDF board top existing side rack shape and size shown on drawing including 4mm thick teak wood beading all around. including tightening with screw other member of the side rack ,complete all as specified and shown on drawing

S&F in replacement 18mm thick pre laminated MDF board bottom existing side rack shape and size shown on drawing including 4mm thick teak wood beading all around complete all as specified.

S&F in replacement 18mm thick pre laminated MDF board sides existing side rack shape and size shown on drawing including 4mm thick teak wood beading all around complete all as specified.

S&F in replacement 18mm thick pre laminated MDF board bottom existing shelves rack shape and size shown on drawing including 4mm thick teak wood beading all around complete all as specified.

S&F in replacement 5mm thick glass door with double aluminum channel existing side rack shape and size shown on drawing including suitable handle complete all as specified.

Repair to Table office offrs steel with side table HFD-2050

S & F in replacement of unserviceable Table top with new Table top made of 18 mm thick pre- laminated MDF board size of 1800X900mm with 4 mm thick, half round teak wood edging shall be provided all around and fixed to frame with screws complete. All exposed surfaces of wood work shall be treated with French Polish high gloss best quality and included electric welding of loose compodent by continuous welding around the broken joints all as specified and as shown on drawing.

Repair to drawer/ shutter of the table by removing deep dents, welding of broken joints etc., complete all as specified.

S & F in replacement of unserviceavle lock with new lock size of 40 mm , 4 lever ISI marked with duplicate key, complete all as specified.

S & F in replacement of unserviceable PVC shoes with new PVC shoes of best quality, complete all as specified.

Removing of old u/s table front side runner and S&F new runner of size 1800X600mm made out of pre laminated MDF board, complete all as specified.

Removing of old u/s table table side runner and S&F new side runner of size 730X600mm made out of pre laminated MDF board, complete all as specified.

Removing of old u/s table side rack top and S&F new table side rack top size of 900X450mm made out of pre laminated MDF board, complete all as specified.

Removing of old u/s table side rack side runner and S&F new side rack side runner size of 600X400mm made out of pre laminated MDF board,complete all as specified.

Removing of old u/s table side rack key board tray and S&F new table side rack key board tray size of 450X480mm made out of pre laminated MDF board with telescopic channel,complete all as specified.

M&L for painting to steel and iron surface of table with one coat of synthetic enamel paint by spray gun of olive green shade after preparation of old surface, complete all as specified.

Repair to Hot food trolley alm HFD-2066

S&F in replacement heating elements 2 KW cup type with rubber washer and nut & bolts. including minor repair like gas welding ,nut & bolts ,heating system and preparation of steel surface inner and outer of the hot food trolly, complete all as specified and shown on drawing.

Removing old u/s old copper conductor and S&F cable three core copper conductor heavy duty 5 mtr for each trolly with three pin plug top 15 amps, complete all as specified.

Removing old u/s old steel pot and S&F new steel pot with lid of suitable size for each hot food trolly 7 Nos Pot, complete as per drawing.

REPAIRS TO TABLE PEG FD-25(M),FD-236,FD-266,FD-277,FD-384 :

Removing of old U/S existing top from table peg and S&F new top of size as per drg.made out of 18/19mm thick partical board exterior grade duly post formed with 0. 6 mm thick laminates in wallnut colour or as approved by Engr-in charge with 2 mm thick PVC edging of make Rehu/Pegasus/Kynes shall be fixed on two side with strong bonded chemical adhessive through hot pressed machine,complete all as per drgs and as directed.

REPAIRS TO TEAPOY WOODE FD-34(M),FD-232,FD-278,FD-382:

(a) Removing of old U/S existing top from teapoy and S&F new top of size as per drg. made out of 18/19mm thick partical board exterior grade duly post formed with 0. 6 mm thick laminates in wallnut colour or as approved by Engr-in charge with 2 mm thick PVC edging of make Rehu/Pegasus/Kynes shall be fixed on two side with strong bonded chemical adhessive through hot pressed machine,complete all as per drgs and as directed.

REPAIR TO TABLE CENTRE FD-29(M),FD-134(M),FD-152(M),FD-235,FD-274,FD-393:

Removing of old U/S existing top from table center and S&F new top of size as per drg. made out of 18/19mm thick partical board exterior grade duly post formed with 0. 6 mm thick laminates in wallnut colour or as approved by Engr-in charge with 2 mm thick PVC edging of make Rehu/Pegasus/Kynes shall be fixed on two side with strong bonded chemical adhessive through hot pressed machine,complete all as per drgs and as directed.

REPAIRS TO TABLE 900X600MM FD-88(M),FD-94(M),FD-291(M),FD-352:

Removing of old U/S existing top from table 900x600 mm and S&F new top of size as per drg.made out of 18/19mm thick partical board exterior grade duly post formed with 0. 6 mm thick laminates in wallnut colour or as approved by Engr-in charge with 2 mm thick PVC edging of make Rehu/Pegasus/Kynes shall be fixed on two side with strong bonded chemical adhessive through hot pressed machine,complete all as per drgs and as directed.

REPAIRS TO TABLE WRITING FD-33(M),FD-151(M), FD-268,FD-249,FD-275

Removing of old U/S existing top from Table writing and S&F new top of size as per drg.made out of 18/19mm thick partical board exterior grade duly post formed with 0. 6 mm thick laminates in wallnut colour or as approved by Engr-in charge with 2 mm thick PVC edging of make Rehu/Pegasus/Kynes shall be fixed on two side with strong bonded chemical adhessive through hot pressed machine,complete all as per drgs and as directed.

REPAIRS TO TABLE DINING 900X900MM FD-291,FD-209:

(a) Removing of old U/S existing top from table dining and S&F new top of size as per drg.made out of 18/19mm thick partical board exterior grade duly post formed with 0. 6 mm thick laminates in wallnut colour or as approved by Engr-in charge with 2 mm thick PVC edging of make Rehu/Pegasus/Kynes shall be fixed on two side with strong bonded chemical adhessive through hot pressed machine,complete all as per drgs and as directed.

REPAIRS TO TABLE DINING 1200X900MM FD-273:

Removing of old U/s existing top from table dining and S&F new top of size as per drg.made out of 18/19mm thick partical board exterior grade duly post formed with 0. 6 mm thick laminates in wallnut colour or as approved by Engr-in charge with 2 mm thick PVC edging of make Rehu/Pegasus/Kynes shall be fixed on two side with strong bonded chemical adhessive through hot pressed machine,complete all as per drgs and as directed.

REPAIRS TO TABLE DINING 6 PERSONS FD-30(M),FD-239,FD-269,FD-273:

Removing of old U/S existing top from table dining and S&F new top of size as per drg. made out of 18/19mm thick partical board exterior grade duly post formed with 0. 6 mm thick laminates in wallnut colour or as approved by Engr-in charge with 2 mm thick PVC edging of make Rehu/Pegasus/Kynes shall be fixed on two side with strong bonded chemical adhessive through hot pressed machine,complete all as per drgs and as directed.

REPAIRS TO TABLE DINING 8 PERSONS FD-30(M),FD-239,FD-273,FD-376:

(a) Removing of old U/S existing top from table and S&F new top of size as per drg. made out of 18/19mm thick partical board exterior grade duly post formed with 0. 6 mm thick laminates in wallnut colour or as approved by Engr-in charge with 2 mm thick PVC edging of make Rehu/Pegasus/Kynes shall be fixed on two side with strong bonded chemical adhessive through hot pressed machine,complete all as per drgs and as directed.

M R Taders

shekhar & company

VARAROHA BUILDERS