HSD -Supply and Installation of Open Gym Equipments at Family Health Centre, Omassery GP, Kozhikode District under Spill over Project 2025-26 -Vanitha Open Gym

Civil Works- Foundation for Equipments Installation

2.8.1 Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All kinds of soil

5.9.1 Centering and shuttering including strutting, etc. and removal of form for: Foundations, footings, bases of columns, etc for mass concrete

5.22.6 Steel reinforcement for R.C.C work including straightening, cutting, bending , placing in position and binding all complete upto plinth level Thermo - Mechanically Treated bars of grade Fe-500D or more

5.1.2 Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level:1:1:5:3 (1 cement 1.5 coarse sand :3 graded stone aggregate 20 mm nominal size derived from natural sources)

Equipments Installation

OD185289/2025-2026 Supply and Installation of Chest Press -Product Specifications- * Main Frame: The main frame of Chest Press is made from 100NB GI Pipe and Handle: Handle frame is made from 32NB and 25NB GI Pipe. Material used for handgrip is EPDM (ethylene propylene diene monomer) Rubber. * Footrest: 32NB GI pipe is used for footrest. Product Area :0.98m x 0.995m (3.2ft x 3.2ft) Safe play Area: 1.98m x 1.99m (6.5ft x 6.5ft), Other Major Specifications :-Bearing: Bearings are oil sealed, self-lubricated made of SKF/NTN/NACHI/FAG/NRB make shall be provided for smooth & trouble-free movement, Bearing Housing shall be made from MS material. Pipes: All metal pipes are Hot Dipped Galvanized Pipes with CGI thickness of 60micron. Powder coating: It shall be done with pure polyester raw material. Dry film Thickness maintained within the range of 50-70 microns. It is tested for adhesion test with the help of cross hatch cutter instruments. Nut and Bolts: Galvanized/S.S./Allen Bolt/Button Head Allen Bolt & Nuts / Nylon Lock Nuts are used with PVC Bolt Caps. All open ends of pipe been closed by GI / PVC caps for user safety against entrapment. All pipes were ISO 9001:2015Certified: ISO (excluding the cost of foundation).

OD185288/2025-2026 Supply and Installation of Leg Press- Product Specifications- *Post Dia: 80NB GI main vertical support pipe of Leg Press Double is fixed over 10 mm thick base plate. 10mm thick clamping plates are attached to main frame to hold the rest of assemblies. * Footrest: Footrest support to be of 25NB G.I Pipe. The materials used for footrest is Aluminum casting/LLDPE/HDPE/Nylon. * Seat frame: Seat Frame made from 40NB bend GI pipes and Material used for seat is (HDPE -(High-Density Polyethylene) UV stabilized/LLDPE. Product Area: 1.15m X 0.5m (3.65Ft X 1.64Ft) Safe Play Area: 2.15m X 1.5m (6.93Ft X 5Ft) Certificate: ISO 9001:2015, Other Major Specifications :-Bearing: Bearings are oil sealed, self-lubricated made of SKF/NTN/NACHI/ FAG/NRB make shall be provided for smooth & trouble-free movement, Bearing Housing shall be made from MS material. Pins and Circlips: 25mm diameter pins shall be made from EN& / MS material & Circlips made from standard material Pipes: All metal pipes are Hot Dipped Galvanized Pipes with GI thickness of 60micron. Powder coating: It shall be done with pure polyester raw material. Dry film Thickness maintained within the range of 50-70 microns. It is tested for adhesion test with the help of cross hatch cutter instruments. Nut and Bolts: Galvanized/S.S./Allen Bolt/Button Head Allen Bolt & Nuts / Nylon Lock Nuts are used with PVC Bolt Caps. All open ends of pipe been closed by GI/PVC caps for user safety against entrapment.(excluding the cost of foundation).

OD185296/2025-2026 Supply and Installation of Leg Extension:- Function- for lower body workout, Product Specifications- Two side frames of WALKER are made from 80NB & 40NB Galvanized pipes. The handle pipe: consists of 25NB Galvanized pipes with Rubber grip on top end. This handle pipes are hinged over 80NB frame. The handle pipe is further extended to the rectangular tube of 50×25 mm on both sides with 40NB galvanized pipe links. Footrest: The materials used for footrest are aluminum/LLDPE/HDPE/Nylon. Product Area: 2.5m x 0.8m (8.2ft x 2.6ft) Safe Play Area: 3.5m x 1.8m (11.5ft x 5.9ft) Age group-13 & above, Other Major Specifications:-Bearing: Bearings are oil sealed, self-lubricated made of SKF/NTN/ NACHI make shall be provided for smooth & trouble-free movement, Bearing Housing shall be made from MS material. All metal pipes are Hot Dipped Galvanized Pipes with GI thickness of 60 micron. Powder coating: It shall be done with pure polyester raw material. Dry film Thickness maintained within the range of 50-70 microns. It is tested for adhesion test with the help of cross hatch cutter instruments. Nut and Bolts: Galvanized/S.S./Allen Bolt/Button Head Allen Bolt & Nuts / Nylon Lock Nuts are used with PVC Bolt Caps. All open ends of pipe been closed by GI/PVC caps for user safety against entrapment. All pipes were Certified: ISO 9001:2015(excluding the cost of foundation).

OD185421/2025-2026 Supply and Installation of Shoulder Exercise, Function:- Strengthens shoulder and arms, Product Specifications- Post Dia: 100NB GI main vertical support pipe of Shoulder Exerciser Double is fixed over 10mm thick base plate. 10mm thick clamping plates are attached to main frame to hold the rest of assemblies Seat frame: Seat Frame made from 40NB bend GI pipes and Material used for seat are HDPE (High-Density Polyethylene) UV stabilized with UV property/LLDPE. This seat frame is mounted on vertical support pipe through 40NB GI pipe links with the help of specially designed bearing housings. Connecting link plates are 8mm thick Footrest/Handle: 25NB GI pipe is attached to seat frame to form a foot rest. Handle made up of 25NB Pipe with PVC end cap. Product Area: 1.2m x 0.9m (3,9t x 3ft) Safe Play Area: 2.2m x 1.9m (7.2ft x 6.2ft) Ideal For: 13 Years & above. Other Major Specifications :-Bearing: Bearings are oil sealed, self-lubricated made of SKF/ NTN/NACHI/FAG/NRB make shall be provided for smooth & trouble-free movement, Bearing Housing shall be made from MS material. Pins and Circlips: 25mm diameter pins shall be made from EN& / MS material & Circlips made from standard material Pipes: All metal pipes are Hot Dipped Galvanized Pipes with GI thickness of 60micron. Powder coating: It shall be done with pure polyester raw material. Dry film Thickness maintained within the range of 50-70 microns. It is tested for adhesion test with the help of cross hatch cutter instruments. Nut and Bolts: Galvanized/S.S./Allen Bolt/Button Head Allen Bolt & Nuts / Nylon Lock Nuts are used with PVC Bolt Caps. All open ends of pipe been closed by GI / PVC caps for user safety against entrapment. (excluding the cost of foundation). all pipes were ISO 9001:2015 certified.

OD185422/2025-2026 Supply and Installation of Shoulder Twirl- Functions: - Strengthens Shoulder & arms, improves shoulder agility, Product Specifications Each Post Dia: 100NB GI main vertical support pipe of Shoulder Twirl is fixed over 10mm thick base plate. 10mm thick clamping plates are attached to main frame to hold the rest assemblies Wheel Structure: 20NB Galvanized pipe bend to form ring of wheel and spokes also made up of 20NB G.I. pipes that connect to each other to form a wheel of Shoulder Twirl. Nylon knobs are provided on the wheels for gripping purpose. Wheel is fixed to main support with the help of 40NB connector pipe with specially designed bearing housing. Product Area: 2m x 0.9m (6.6ft x 2.6ft) Safe Play Area: 3m x 1.9m (9.8ft x 6.2ft) Ideal For: 13 Years & above. Other Major Specifications :-Bearing: Bearings are oil sealed, self-lubricated made of SKF/NTN/NACHI/FAG/NRB make shall be provided for smooth & trouble-free movement, Bearing Housing shall be made from MS material. Pins and Circlips: 25mm diameter pins shall be made from EN& / MS material & Circlips made from standard material Pipes: All metal pipes are Hot Dipped Galvanized Pipes with GI thickness of 60micron. Powder coating: It shall be done with pure polyester raw material. Dry film Thickness maintained within the range of 50-70 microns. It is tested for adhesion test with the help of cross hatch cutter instruments. Nut and Bolts: Galvanized/S.S./Allen Bolt/Button Head Allen Bolt & Nuts / Nylon Lock Nuts are used with PVC Bolt Caps. All open ends of pipe been closed by GI/PVC caps for user safety against entrapment.(excluding the cost of foundation). All pipes used were ISO 9001:2015 certified.

OD185423/2025-2026 Supply and Installation of Hip Twister: Functions:- Stretches waist and Upper body, Product Specifications Main Support: The main support of Hip twister consists of 100NB G.I Pipe. Handle: 25NB Galvanized pipe bend to form handle of Hip Twister product Footrest Bend Pipe: 40NB GI pipe is attached with main frame to form a foot rest having 130x50x5mm thick plate Standing or Rotating Disc: Standing Disc of 300mm Dia round size shall be made of HDPE/Metal. 15mm thick Sheet and Plate 10mm thick for base support Product Area: 1.2m x 0.9m (3.9ft x 3ft) Safe Play Area : 2.2m x 1.9m (7.2ft x 6.2ft) Ideal For: 13 Years & above. Other Major Specifications:-Bearing: Bearings are oil sealed, self-lubricated made of SKF/NTN/ NACHI/FAG/NRB make shall be provided for smooth & trouble-free movement, Bearing Housing shall be made from MS material. Pins and Circlips: 25mm diameter pins shall be made from EN& / MS material & Circlips made from standard material Pipes: All metal pipes are Hot Dipped Galvanized Pipes with GI thickness of 60micron. Powder coating: It shall be done with pure polyester raw material. Dry film Thickness maintained within the range of 50-70 microns. It is tested for adhesion test with the help of cross hatch cutter instruments. Nut and Bolts: Galvanized/S.S./Allen Bolt/Button Head Allen Bolt & Nuts / Nylon Lock Nuts are used with PVC Bolt Caps. All open ends of pipe been closed by GI / PVC caps for user safety against entrapment. All pipes were ISOI 9001:2015 (excluding the cost of foundation).

OD185424/2025-2026 Supply and Installation of Aerial Stroller, Functions: - Strengthens leg muscles, lower body workout, Product Specifications --Post Dia: The Aerial Stroller having. Ergonomic design with 100NB Gl main vertical support pipe of Aerial Stroller is fixed over 10mm thick base plate. Clamping plates are attached to main frame to hold the rest of assemblies. Footrest and Handles: Footrest bend and Handle having 40NB and 25NB Dia galvanized pipe respectively. The materials used for footrest is aluminum/LLDPE/HDPE/Nylon Product Area: 1m x 0.5m (5ft x 2.6ft) Safe Play Area: 2m x 1.5m (6.6ft x 5ft) Ideal For: 13 Years & above. Other Major Specifications:-Bearing: Bearings are oil sealed, self-lubricated made of SKF/NTN/ NACHI/FAG/ NRB make shall be provided for smooth & trouble-free movement, Bearing Housing shall be made from MS material. Pins and Circlips: 25mm diameter pins shall be made from EN& / MS material & Circlips made from standard material Pipes: All metal pipes are Hot Dipped Galvanized Pipes with GI thickness of 60micron. Powder coating: It shall be done with pure polyester raw material. Dry film Thickness maintained within the range of 50-70 microns. It is tested for adhesion test with the help of cross hatch cutter instruments. Nut and Bolts: Galvanized/S.S./Allen Bolt/Button Head Allen Bolt & Nuts / Nylon Lock Nuts are used with PVC Bolt Caps. All open ends of pipe been closed by GI/PVC caps for user safety against entrapment. All pipes used area ISO 9001:2015(excluding the cost of foundation).

OD185425/2025-2026 Supply and Installation of Single Bar, Functions:- strengthens muscles in upper limbs, shoulder and back, Product Specifications Vertical Supports: Vertical supports of Single Bar are made by 80NB GI pipes. Horizontal Bars: The vertical pipe gives supports to horizontal handle bars. Horizontal bars are made up of 40NB Gi pipe. All horizontal bar supports are attached at different height to the vertical frame Product Area: 1.8m x 0.2m (5.9ft x0.65ft) Safe Play Area: 2.8m x 1.2m (9.2ft x 3.93ft). Other Major Specifications :-Bearing: Bearings are oil sealed, self- lubricated made of SKF/NTN/NACHI/FAG/NRB make shall be provided for smooth & trouble-free movement, Bearing Housing shall be made from MS material. Pipes: All metal pipes are Hot Dipped Galvanized Pipes with GI thickness of 60micron. Powder coating: It shall be done with pure polyester raw material. Dry film Thickness maintained within the range of 50-70 microns. It is tested for adhesion test with the help of cross hatch cutter instruments. Nut and Bolts: Galvanized/ S.S./Allen Bolt/Button Head Allen Bolt & Nuts / Nylon Lock Nuts are used with PVC Bolt Caps. All open ends of pipe been closed by GI / PVC caps for user safety against entrapment. All pipes are ISO 9001:2015 certified (excluding the cost of foundation).

Site development- Levelling & Interlock laying

OD207202/2025-2026 [Derived from 16.68] Providing and laying 60 mm thick factory made cement concrete interlocking paver block of M - 30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50 mm thick compacted stone chippings, filling the joints etc. all complete as per the direction of Engineer-in- charge.

Name board

OD185431/2025-2026 Fabrication, supply, conveyance & installation of Granite name board indicating the cost involved, the commencement, completion and inauguration date etc

10.2 Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.