Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹1.9 LAccepted-AOC | ₹1.9 L | L1 | Accepted-AOC Accepted |
| 2 | L2₹1.9 L+₹2,044.16 (1.08%)Rejected-AOC | ₹1.9 L+₹2,044.16 (1.08%) | L2 | Rejected-AOC Rejected |
| Sl No | Description | Qty | Unit | St.Joseph Engineering Works L1 | BABIN C B L2 |
|---|---|---|---|---|---|
| 1.00Truss work | |||||
| 1.00 | OD17944/2025-2026:providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.35 mm (+0.05%), total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns apoxy primer on both side. of the sheet and polyester top coat 15-18 microns.Sheet should have protective guard film of 25 microns minimum to avoid scratchesduring transportation and should be supplied in single desiredby Engineer-in-charge.The sheet shall be fixed using self drilling/self tapping screws of size (5.5x55mm) with EPDM seal, complete upto any pitch in horizontal/ vertical orcurved surfaces, excluding the cost of purlins, rafters and trusses and including cutting tosize and shape
wherever required. | 61.74 | sqm | 542 ₹33,463.08 Lowest | 558.99 ₹34,512.04 |
| 1.00 | 10.16.1:Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.Hot finished welded type tubes | 323.3 | kg | 170 ₹54,961.68 Lowest | 174.84 ₹56,526.47 |
| 1.00 | OD154870/2025-2026:Modified 50.10.2 and 10.16 Steel work for purlin/single section with (round or square or rectenglular hollow tube for trusses etc including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete | 231.99 | kg | 127 ₹29,462.73 Lowest | 127.25 ₹29,520.73 |
| 1.00 | 2.6.1:Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in-charge.All kinds of soil | 0.62 | cum | 250 ₹156.25 | 231.86 ₹144.91 Lowest |
| 1.00 | 4.1.3:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 (cement : 2 coarse sand (zone-III)derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) | 0.98 | cum | 8,200 ₹8,077 Lowest | 8,312.37 ₹8,187.68 |
| 1.01 | OD76331/2025-2026:Supplying and fixing UPVC rain water collection gutter(150*100mm) of approved make including all cost of necessary fittings ,labour for fixing ,scaffoldings etc complete | 12.6 | metre | 495 ₹6,237 Lowest | 525.95 ₹6,626.97 |
| 1.01 | 13.61.1:Painting with synthetic enamel paint of approved brand and manufacture to give an even shade:Two or more coats on new work | 26 | sqm | 140 ₹3,640 Lowest | 148.37 ₹3,857.62 |
| 1.01 | OD192410/2025-2026:Providing and laying 60 mm thick factory made cement concrete interlocking paver block of M
- 30 grade made by block making machine with strong vibratory compaction, of approved size,
design & shape, laid in required colour and pattern over and including 50 mm thick
compacted bed of coarse sand, filling the joints with fine sand etc. all complete as per the
direction of Engineer-in-charge. (Modified Specification of CPWD 16.68) | 50.8 | sqm | 1,035 ₹52,578 | 1,008.73 ₹51,243.48 Lowest |
Tender Value
₹2.1 L
EMD Value
₹5,295
Closing Date
19 Sept 2025, 6:00 pmClosed
Assistant Engineer,LSGD SEction varandarappilly Gp
O/O Assistant Engineer ,LSGD Section varandarappilly GP Thrissur (dist)
Pr no 165/26 Truss work to gramamandhiram anganavadi -in Ward 18
2025_LSGD_795318_1
TN4 -12/2025-26/AELSGD/VPLY
Open Tender
Civil Works - Others
Item Rate
330 days
Varandarappilly Gp
Please refer Tender documents.
10 documents required · 10 mandatory
₹555
Yes
₹5,295
Yes
27 Dec 2025
9 Sept 2025
22 Sept 2025
9 Sept 2025
19 Sept 2025
9 Sept 2025
Amount
Truss work
OD17944/2025-2026:providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.35 mm (+0.05%), total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns apoxy primer on both side. of the sheet and polyester top coat 15-18 microns.Sheet should have protective guard film of 25 microns minimum to avoid scratchesduring transportation and should be supplied in single desiredby Engineer-in-charge.The sheet shall be fixed using self drilling/self tapping screws of size (5.5x55mm) with EPDM seal, complete upto any pitch in horizontal/ vertical orcurved surfaces, excluding the cost of purlins, rafters and trusses and including cutting tosize and shape wherever required.
10.16.1:Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.Hot finished welded type tubes
OD154870/2025-2026:Modified 50.10.2 and 10.16 Steel work for purlin/single section with (round or square or rectenglular hollow tube for trusses etc including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete
2.6.1:Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in-charge.All kinds of soil
4.1.3:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 (cement : 2 coarse sand (zone-III)derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources)
OD76331/2025-2026:Supplying and fixing UPVC rain water collection gutter(150*100mm) of approved make including all cost of necessary fittings ,labour for fixing ,scaffoldings etc complete
13.61.1:Painting with synthetic enamel paint of approved brand and manufacture to give an even shade:Two or more coats on new work
OD192410/2025-2026:Providing and laying 60 mm thick factory made cement concrete interlocking paver block of M - 30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50 mm thick compacted bed of coarse sand, filling the joints with fine sand etc. all complete as per the direction of Engineer-in-charge. (Modified Specification of CPWD 16.68)
BABIN C B (BID ID -2346223)
Bidder Name
St.Joseph Engineering Works
BABIN C B
stage.html
html • 0.04 MB
tech_eval.pdf
fin_eval.pdf
aoc.pdf
finance_1315140.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .