Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | 1₹7.9 LAccepted-Finance | ₹7.9 L | 1 | Accepted-Finance L1 |
| 2 | 2₹8.0 L+₹8,588.31 (1.09%)Rejected-Finance | ₹8.0 L+₹8,588.31 (1.09%) | 2 | Rejected-Finance L2 |
| 3 | 3₹8.0 L+₹9,468.58 (1.20%)Rejected-Finance | ₹8.0 L+₹9,468.58 (1.20%) | 3 | Rejected-Finance L3 |
| Sl No | Description | Qty | Unit | RAJAN S P L2 | Subin M P L1 | Vamithra Infrastructure Private Limited L3 |
|---|---|---|---|---|---|---|
| 1.00FHC-SHEET ROOFING | ||||||
| 1.00 | 2.28.1:Surface dressing of the ground including removing vegetation and in-equalities not exceeding 15 cm deep and disposal of rubbish, lead up to 50 m and lift up to 1.5 m.All kinds of soil | 157.6 | sqm | 30.79 ₹4,852.5 | 30.27 ₹4,770.55 Lowest | 30.63 ₹4,827.29 |
| 1.00 | 2.8.1:Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil | 2.81 | cum | 313.91 ₹881.46 | 308.55 ₹866.41 Lowest | 312.74 ₹878.17 |
| 1.00 | 4.1.3:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 (cement : 2 coarse sand (zone-III)derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) | 2.81 | cum | 8,059.92 ₹22,632.26 | 7,922 ₹22,244.98 Lowest | 8,016.82 ₹22,511.23 |
| 1.00 | 50.10.1:Steel work in built up G I tubular ( round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting,fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete | 1,164.64 | kg | 200 ₹2,32,927.8 | 198.08 ₹2,30,691.69 Lowest | 200.45 ₹2,33,451.89 |
| 1.00 | 50.10.2:Steel work for purlin/single section with G I pipes including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete | 289.92 | kg | 163.23 ₹47,323.64 | 160.44 ₹46,514.76 Lowest | 162.35 ₹47,068.51 |
| 1.01 | OD85732/2026-2027:providing and fixing Alu Zinc Profile sheets (size ,shape and pitch of corrugation as approved by engineer - in- charge) 0.40mm(0.050%) thickness .Sheet should have protective Guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single lenghth up to 12 metre or as directed by engineer - in -charge . the sheet shall be fixed using self drilling /self tapping screws of size (5.5x0.55mm) with EPDM seal., complete u toany pitch in horizontal / vertical or curved vertical or curved surfaces , excluding the cost of purlins ,rafters and trusses and including cutting to size and shape wherever required (modified 12.50) | 164.83 | sqm | 950 ₹1,56,592.3 | 940.61 ₹1,55,044.51 Lowest | 951.87 ₹1,56,900.54 |
| 1.01 | OD86233/2026-2027:Providing and fixing 150 mm UPVC square gutter pipe over GI Clamp of same profile @ 1 mtr C/C | 59 | metre | 300 ₹17,700 Lowest | 300.53 ₹17,731.27 | 304.12 ₹17,943.08 |
| 2.00FHC-INTERLOCKING&BASIC FACILITIES | ||||||
| 2.00 | OD88512/2026-2027:Providing and laying 60mm thick factory made cement concrete interlocking paver block made by block machine with strong vibratory compaction of approved size design and shape laid in required colour and pattern over and including 50mm thick compacted bed of stone aggregate 6mm nominal size filling the joints with fine sand etc.all complete as per the direction of Engineer-in-charge. vertically includingcost and conveyance of all materials all labour charges,
fabricating etc. complete. (Modified 16.68 by replacing Sand bed 6mm stone aggregate bed) | 144.09 | sqm | 1,025 ₹1,47,689.18 | 1,015.72 ₹1,46,352.05 Lowest | 1,027.88 ₹1,48,104.15 |
Tender Value
₹8.6 L
EMD Value
₹21,529
Closing Date
28 Jul 2026, 2:00 pmClosed
ASSISTANT ENGINEER
SUBDIVISION PANOOR LID AND EW
Annual Plan-PANOOR BP-PRO NO 47-2026- 27--IMPROVEMENTS OF BASIC FACILITIES TO BLOCK FHC-
2026_LSGD_861317_1
AE/PBP/1-2026-27/AP
Open Tender
Civil Works - Buildings
Item Rate
PANNYANNUR
Please refer Tender documents.
7 documents required · 7 mandatory
₹1,900
Yes
₹21,529
Yes
9 Sept 2026
20 Jul 2026
29 Jul 2026
20 Jul 2026
28 Jul 2026
20 Jul 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1FHC-SHEET ROOFING | |||||
| 1.001 | 2.28.1:Surface dressing of the ground including removing vegetation and in-equalities not exceeding 15 cm deep and disposal of rubbish, lead up to 50 m and lift up to 1.5 m.All kinds of soil | 1 | sqm | - | - |
| 1.002 | 2.8.1:Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil | 1 | cum | - | - |
| 1.003 | 4.1.3:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 (cement : 2 coarse sand (zone-III)derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) | 1 | cum | - | - |
| 1.004 | 50.10.1:Steel work in built up G I tubular ( round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting,fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete | 0.6 | kg | - | - |
| 1.005 | 50.10.2:Steel work for purlin/single section with G I pipes including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete | - | kg | - | - |
| 1.006 | OD85732/2026-2027:providing and fixing Alu Zinc Profile sheets (size ,shape and pitch of corrugation as approved by engineer - in- charge) 0.40mm(0.050%) thickness .Sheet should have protective Guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single lenghth up to 12 metre or as directed by engineer - in -charge . the sheet shall be fixed using self drilling /self tapping screws of size (5.5x0.55mm) with EPDM seal., complete u toany pitch in horizontal / vertical or curved vertical or curved surfaces , excluding the cost of purlins ,rafters and trusses and including cutting to size and shape wherever required (modified 12.50) | 0.6 | sqm | - | - |
| 1.007 | OD86233/2026-2027:Providing and fixing 150 mm UPVC square gutter pipe over GI Clamp of same profile @ 1 mtr C/C | - | metre | - | - |
| 2FHC-INTERLOCKING&BASIC FACILITIES | |||||
| 2.001 | OD88512/2026-2027:Providing and laying 60mm thick factory made cement concrete interlocking paver block made by block machine with strong vibratory compaction of approved size design and shape laid in required colour and pattern over and including 50mm thick compacted bed of stone aggregate 6mm nominal size filling the joints with fine sand etc.all complete as per the direction of Engineer-in-charge. vertically includingcost and conveyance of all materials all labour charges,
fabricating etc. complete. (Modified 16.68 by replacing Sand bed 6mm stone aggregate bed) | 0.8 | sqm | - | - |
stage.html
html • 0.03 MB
tech_eval.pdf
fin_eval.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Tendernotice_1.pdf
PDF • 0.05 MB
BOQ_1456790.xls
BOQ • 0.32 MB
FOTT.pdf
Tender Documents • 0.42 MB
AFFIDAVITttt.pdf
Tender Documents • 0.02 MB
Epaymentform.pdf
Tender Documents • 0.23 MB
sbdfhcC.pdf
Tender Documents • 1.80 MB
FIG.pdf
Tender Documents • 0.13 MB
PAG.pdf
Tender Documents • 0.55 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .