Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹8.6 LAccepted-AOC | L1 | Accepted-AOC BEING L1 | |
| 2 | L2₹9.1 L+₹45,222.04 (5.25%)Rejected-Finance | L2 | Rejected-Finance NOT BEING L1 | |
| 3 | L3₹11.5 L+₹2.9 L (33.3%)Rejected-Finance 361 BEHIND DAV SCHOOL JAWAHAR NAGAR SRINAGAR 190008 | SRINAGAR | JAMMU AND KASHMIR | 190008 | L3 | Rejected-Finance NOT BEING L1 |
Tender Value
₹10.7 L
EMD Value
₹21,400
Closing Date
26 Aug 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
KARGIL
OFFICE OF THE GE KARGIL LADAKH
PROVN OF 03XURINAL POTS 01X TOILET WITH BATHROOM ATTACHED SEWAGE TANK AND WATER STORAGE TANK OF FD WKSP AT DRAS STN UNDER GE KARGIL
2022_MES_540952_1
GE/K-26/2022-23
Open Tender
Civil Works
Item Rate
180 days
DRAS
Please refer Tender documents.
7 documents required · 7 mandatory
₹500
GE KARGIL
₹21,400
Yes
26 Sept 2022
28 Jul 2022
29 Aug 2022
28 Jul 2022
26 Aug 2022
12 Aug 2022
Amount
Surface dressing n.exc 15cm deep and getting out hard/dense soil .
Excavation in trenches n.exc 1.5M wide and n.exc 1.5M depth in foundation etc and getting out in hard/dense soil
M&L PCC type D-2 1 :4 : 8 (40mm graded agg) in foundation, filling and mass concrete incl sub base of Bldg..
M & L 50mm thick cement concrete 1:4:8 type- D2 (40 mm graded aggregate ) as in sub base complete all as specified and directed.
M&L for reinforcement cement concrete (nominal mix) type A1 (1:1.5:3) (using 20mm graded crushed stone aggregate) in foundation , including rafts, footing, foundation beams, plinth beams, bases for coloums etc.complete all as specified and directed by Engr-in-Charge.
M&L for reinforcement cement concrete (nominal mix) type A1, (1:1:5:3) (using 20mm graded crushed stone aggregate) as in columns, pillars, piers, posts and struts, complete all as specified and directed by Engr-in-Charge.
M & L for reinforced cement concrete (nominal mix in ) 1:1.5:3 type B1 using 20mm graded stone aggreagate in beams, cantilevers, bressummers, lintels etc complete all as directed
Flat rough finished form work to side of concrete foundations,footings,bases of coloumns,raft and raft beam,sides and soffits(if any) of foundation and plinth beams,and similar works.etc.
Flat rough finished form work to side of pillars, posts, struts, piers, columns and stanchions.etc
Flat rough finished form work to sides and soffits of floor or roof beams, beam haunchings girders, bressummers, lintels, cantilevers, shelves including sup-ports, overhangs, etc. also splays between floors and beams, etc
S&F mild steel TMT bars 10mm dia and over cut to length bent to shape required incl cranking bending spirally for hooping etc and binding with mild steel rie (annealed) not less than 0.9 mm dia or secjring with clips.
-Ditto- all as per item no 11 above but 5mm dia and over upto andincl 10mm dia in strirups, spaces and binder etc.
M&L for walling of random rubble uncoursed well bonded solidly hearted bult in cement mortar 1:6 complete all as specifed and directed by Engr-in -charge..
M&L for Precast cement concrete Type C1 ,(1:3:6) (using 20mm graded crushed stone agg) block masonary with solid blocks exc 10cm in width and setting in CM 1:4, complete all as specified and directed by Engr-in charge.
M&L 15 mm thick cement plaster on other than fair faces concrete surface in cement mortar (1:4) finished even and somooth without using extra cement.
M&L 15 mm thick cement plaster on fair faces of concrete surface in cement mortar (1:6) finished even and somooth without using extra cement.
M&L for preparation of newly plastred surfaces of walls and applying three coats of white wash.
M&L for preparation of new plastered surfaces on walls and applying two coats of cement based paint over a coat of primer.
Returning, filling of hard / dense soil incl spreading, levlling, watering and well ramming in each layer n.exc 25 cm thick
Removal of surplus rock to a distance not exceeding 50m and deposting where directed at a level not exceeding and depostiting where directed at a level not exceeding 1.50m above.
Earth filling in floors or paving including spreding,levelling and ramming with watering as required in layers n.exc 25cm thick.
M&L for broken stone or boulders as in hardcore of gauge not exc 63mm deposited, spread and levelled in layers not exc 15cm thick watered and rammed to a true surface all as specified.
M&L 75mm thick cement concrete (1:3:6) type C2 as in sub base to floor / plinth protection as specified.
M&L 25 mm thick cement concrete 1:2:4 type B-0 as in floor finished even and rough to receive further floor finishes.
S&F Non skid coloured joint free ceramic tiles 7 to 8 mm thick (square/rectangular) each tiles exc 0.06 Sqm but not exc 0.11 Sqm in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tile over 15mm thick screed bed or bedding layer of morar in CM 1:6 complete all as directed
S&F glazed ceramic coloured tiles in vertical surface of size 300x450x7 mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface over 15mm thick rendering in cement mortar 1:4 all as specifed and as directed.
S&F Rolled mild steel Gde Fe-290 (Gde Fe 165) as in Roof trusses (framed), trussed, purlins crane gantries, rails & fastenings & heavy brackets framimg (Beam, tee, angle, channel or flat section) including distance pieces, cleats etc.
S&F Rolled mild steel Gde Fe-290(Gde Fe 165) in Plates (plain or chequered) channels,angle sections, square cut or notched (ordinary & counter sunk) forming holes, with riveted, bolted or welded attachment
S&F Mild steel rag or lewis bolts screwed one end, with hexagonal or square nuts and washers, the other end enlarged and jagged or lewised length of bolt exc 15 cm and not exc 30 cm long and neck diameter 12mm
M&L for preparation of newly untreated steel / iron surfaces of any description over 10cm in width or girth not otherwise described and painting two coat of synthetic enamel paint over a coat of red oxide zinc chrome complete all as specified
S&F 2nd class hard wood Plain, solid straight chowkhats and frames wrought framed rebated on the solid rounded or chamfered put together with glue pinned at joints all as specified &directed.
S&F MIld steel work conforming to Gde Fe-290(Gde Fe 165) as in bands, hold fasts wall ties, wind ties straps supports and stay for rainwater pipes clamps and similar articles etc.
S&F 2nd class hard wood 35 mm thick Plain, framed panelled shutters (any No of panels), with panel of timber flat on both side or veenered particle board medium density, wood particle board with commercial face veneers fitted to chowkats all as specified.
S&F 30mm thick 2nd class hard wood glazed & skelton shutters, open rebated and prepare to receive glass, guage etc (without sash bars) edges of framing plain chamfered or rounded, fitted with cut and mitread beads for securing glass etc fitted to chowkhats
M&L for 6 mm thick plywood, 5 Nos of ply, grade BWP, type BB fixed with screws to timber frame-work complete all as specified and directed.
Plain fillets of second class soft wood (KAIL), wrought, sectional area exceeding 13 Sqcm but not exceeding 25 Sqcm, square, rectangular or triangular in section, secured with nails, complete all as specified and directed by Engr-in-Charge.
M&L for preparation of new wooden surfaces of any dscription over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer
S&F 100mm but hinges medium weight cold rolled mild steel fixed with screws or welded all as directed.
S&F Aluminium alloy, anodized, sliding door bolt with hasp staple (bolt type) & fixing clips of shet, cast or extrucded section & fixing bolts & sliding bolts of extrucded section or cast alluminium alloy & fixed 300mm long.
S&F 150mm long alluminium anodized, barrel tower bolts exturded section & fixed all as specified.
S& F aluminium handles cast type anodised size150mm complete all as specified.
S&F 75 mm butt higes medium weight cold rolled mild steel fixed with screws or welded all as directed.
S& F 100mm long alluminium anodized, barrel tower bots exturded section & fixed all as specified.
S& F aluminium handles cast type anodised size100mm complete all as specified.
S&F figured galss 3mm thckness pin headed type and glazing with oil putty n exc 0.5 Sqm in each pane.
M&L RCC type B-1, (1:2:4) using 20 mm graded crushed stone aggregate as slabs supported on walls, beams & columns in floors, roofs, landings, balconies and in shelves and the like complete all as specified.
Use & waste Form work to soffits of suspended slabs, such as roof slabs, floor slabs, landings and similar work not exceeding 200 mm thick with rough finished flat surfaces of concrete, complete all as specified.
S&F for Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws as specified
S&F for Pre- painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified
S&F rotational moulded polythylene water storage tank 1000 Ltrs capacity (cyliderical / vertical with closed top) hoisted and fixed in postion all as specified
S&F Vitreous china wash down water closet pan orissa pattern size 580x440mm (Pedestal pattern), white (excluding fixing bolts, ,flushing cistern and flush pipe) all as specified.
S&F vitreous china urinal half stall type white (excluding flushing cistern,flush pipe and waste pipe)
S & F 10 Ltrs capacity PVC valveless syphonic action type flushing cistern low level white with inlet ball valve throat flush type and handle incl brackets complete all as specified.
S & F Vitreous china wash basin,white,angle back with pedestal, size 600x480mm excluding taps, waste chain and plug and porcealin stopper but incl brackets
S&F Gun metal globe or gate valve with iron wheel head secrewd bolt ends for iron pipe and fixed of 20mm bore dia all as specifed.
S & F Towel rail 600 mm long PTMT fixed with and incl chromium plated brass screws and wooden/ plastic cleats
M&L 20mm dia GI tubing medium grade with all fitting and fixed to wall and ceilling or laid in floor.
M&L 15mm GI tubing medium grade with all fitting and fixed to wall and ceilling or laid in floor.
S&F bib tap 15 mm bore chromium plated copper alloy with crutch or butterfly handle screwed donw screwed for iorn pipe or brass ferrule.
S7F Stop valves/Angle Cock cast copper alloy, screw down high pressure with crutch or butterfly handly for 15mm bore pipe.
S&F pillar tap 15mm bore chromium plated screwed down, thigh pressure with or without lettered (hot or cold) with long screwed shkes and fly nuts scrrewed for inor pipe.
S & F PVC connection 15mm size with PTMT nuts or length 450mm.
S & F LDPE pipe 32mm dia of pressure rating 6 kg/cm2 fixed complete to wall , ceiling or in floors etc complete all as specifed and directed.
S&F for waste coupling of PTMT (half or full threaded) 32mm dia for basin/ urinal
M&L PVC (SWR) floor trap with 75mm dia outlet with grating incl jointing to waste pipe fixed in cement concrete 1:2:4 type B-1 all as specified.
S & F PVC(SWR) 'S' or 'p' trap 110mm bore complete all as specified.
S&F PVC (SWR) bends any radius 75mm dia
S & F PVC(SWR) pipes single socketed, in any length, with rubber rings joints, laid in trenches or in floors 75mm dia bore complete all
Surface dressing n.exc 15cm deep and getting out hard/dense soil .
M&L PCC 1:3:6 type C2 ( using 40 mm grade aggregate) 75 mm thick as in sub base / paving complete all as specified and as directed
Sand filling in floors or pavings laid in layers n.exc 15 cm thick ,spread,levelled and rammed including watering all as directed by Engr-in-Charge.
Machine pressed precast concrete interlocking paver blocks any shape and size conforming to IS 15658-2006 of 60 mm thickness M-35 Grade with grey cement and pigment.
M & L for plain cement concrete Type B-1, 1:2:4 (using 20 mm graded granite stone aggregate) cast in situ in copings, bed plates, kerbs and the like including weathering, slightly rounded or chamfered angles & throating as directed
Excavation in trenches n.exc 1.5M wide and n.exc 1.5M depth in foundation,shafts,wells cesspits,manholes etc n.exc 10sqm on plan and n.exc 1.50m in depth and getting out in hard/dense soil
M& L PCC type D-2 1 :4 : 8 (40mm graded agg) in foundation, filling and mass concrete.
M&L Cement concrete 1:2:4 type B 2 in surface channels and Drain.
M&L for Precast cement concrete Type C1 ,(1:3:6) (using 20mm graded crushed stone agg) block masonary with solid blocks exc 10cm in width and setting in CM 1:6, complete all as specified and directed by Engr-in charge.
M&L 15 mm thick cement plaster on other than fair faces concrete surface in cement mortar (1:4) finished even and somooth without using extra cement.
Returning, filling incl spreading, levlling, watering and well ramming in each layer n.exc 25 cm thick.
Removal of surplus oil to a distance n exceeding 50m and deposting where directed at a level not exceeding and depostiting where directed at a level not exceeding 1.50m above the starting point and disposal.
M & L for precast cement concrete Type B-1 1:2:4 (20 mm graded aggregate) as in cover slabs (for man holes etc.) water troughs, shelves and similar articles with plain frames set in CM1:6 ,all as specified and directed.
S&F mild steel TMT bars 10mm dia and over cut to length bent to shape required incl cranking bending spirally for hooping etc and binding with mild steel rie (annealed) not less than 0.9 mm dia or secjring with clips.
S&F PVC (SWR) pipes 110 mm dia single socketed in any length with rubber ring joints, laid in trenches or in floors
M & L for PCC 1:3:6 type C2 (using 40 mm graded granite stone aggregate) in concrete bed to drain pipes including packing under and haunching against the sides of pipes after they are laid and tested for pipes of 100 mm bore.
M&L Cement concrete Type B1,1:2:4 , 20mm graded aggregate for coping all as specified and directed.
M&L for forming fair finishes drain or channel 30 cm inner girth in cement concrete using extra cement all as specified and directed.
S & F PVC (SWR) cowl 110 mm dia.
S & F PVC (SWR) bend (any radius) diminishing pieces or tapers (larger bore measured) 110mm bore..
S&F PVC (SWR) 110mm bore junction double,(double,equal or unequal tee bend)
Cutting into existing manholes for connecting new drains making good to pipe and rendering cutting out existing benching for and forming branch channel (1/2 round or 3/4 round section) in cement concrete 1:2:4 type B1, smooth finished and reforming benching as required, of 100mm internal dia.
M&L for Point wiring with multi-stranded copper conductor PVC insulated and unsheathed cable in PVC casing and capping, 1.5 Sqmm with all fittings/accessories and including 1.5 Sqmm PVC insulated copper earth wire connected to common earth including closed recessed wooden terminal Boxes of suitable size made of 2nd class hard wood for mounting switches, sockets etc with 3mm thick laminated sheet cover for one light point or bell/buzzer point controlled by one switch, complete.
S & F Switch piano flush type 5 Amps, single pole one way.
S & F Switch socket combination 2 in 1, and 3 and 2 pin, 5 Amps flush type.
Supply and fixing in LED 1x18 Watt, 220 V, AC decorative box type with driver, holder including LED tubelight connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete.
S & F in Ceiling rose surface bakelite 65x50mm, two to three terminals.
S & F in replacement Sheet metal enclosure for DB's Single door, single pole and neutral, 240V, 8 way with 200 Amp rated bus bar including blanking plates where required. Complete all as specified and directed.
Supply and fixing in replacement 240 V 10 KA C curve miniature circuit breaker (MCB) SPN 40 to 63 Amp in the MCB DB complete with connection testing and commissioning.
Supply and fixing in replacement 240 V 10 KA C curve miniature circuit breaker (MCB) SP 5 to 32 Amp in the MCB DB complete with connection testing and commissioning.
M&L for exhaust fan complete with metallic blade , heavy duty , motor 240 V single phase of size 380 mm sweep incl making hole etc and fixation with 04 nos fully threaded bolt grouted in wall , nut and proding , wire mesh from out side complete with connection, complete all as specified. Make : Havells/Cromton or Equivalent.
S&F in replacement 1100 volts grade heavy duty 10 sqmm 2 core flat cable PVC insulated aluminium stranded conductor, served with inner sheathing of PVC tape and overall PVC sheathed in service connections suspended by insulating hangers not more than 01 metre apart including 4 mm suspension complete all as specified.
Note :(i) Deduction for amount of Rs 0.00 as listed in Schedule A Part - II ( Schedule of Credit) shall be made while awarding of contract. (ii) Building Works Should be carried out as per TD approved by CELZ.
M/S UNIVERSAL ENGINEERS
M/s Aman Enterprises
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .