Repairing of draw bar, circle support and blade lifter of BG825 motor grader sl. no. 3250 and repairing of Arm both, Tyre hand and slider attachment of Tyre handler BL14H 18086 at Tapin North OCP, Hazaribagh Area

Amount

PART 'A1': Repairing of Frame and draw bar : Industrial gas set for heating and straightening of frame and draw bar plate

Gauging electrode for removing bulged material. L-602

Welding of gauged portion. [Lomelt 210]

Material filling in worn-out portion of flange, retainer, guide and plate by suitable electrode. [7018 spl]

Grinding stone for surface finish of welded portion.[size-4"]

Hiring cost of grinding machine and special tools tackles - 01 set for job completion

Making of shim 15 nos. by machining.

Supervisor- (01 person per shift x 03 days)

Welder – (02 person per shift X 03 days)

Fitter/machinist – (02 person per shift X 03 days)

Helper – ( 02 person per shift X 03 days)

PART 'A2': Repairing of Circle support Industrial gas set for heating and straightening of plate, cover etc.

Gauging electrode for removing bulged material and bush cutting. L602

Welding of gauged portion [Lomelt 210]

Material filling in worn-out portion of both bracket, guide and plate by suitable electrode. [7018 spl]

Hiring cost of grinding machine and special tools tackles - 01 set for job completion

Grinding stone for finishing of job. (size - 4")

Making of rod, bushing and shim 12 nos. by machining.

Supervisor- (01 person per shift x 03 days)

Welder – (02 person per shift X 03 days)

Fitter/machinist – (02 person per shift X 03 days)

Helper – ( 02 person per shift X 03 days)

PART 'A3': Repairing of Blade lifter Industrial Gas set for straightening and heating of Yoke, holder and both bracket

Gauging electrode for removing of bulged material and bush cutting. L602

Welding of gauged portion. [Lomelt 210]

Material filling in worn out portion of both bracket, holder and cap by suitable electrode. [7018 spl]

Grinding stone for surface finish of welded portion.[size-4"]

Hiring cost of grinding machine and special tools tackles - 01 set for job completion

Making of bush 01 no. and shim 06 no. by machining.

Supervisor- (01 person per shift x 03 days)

Welder – (02 person per shift X 03 days)

Fitter – (02 person per shift X 03 days)

Helper – ( 02 person per shift X 03 days)

Part B: Repairing of Tyre handler BL14H 18086 - Industrial gas set for heating of arm, tyre hand and cylinder attachment

Gauging electrode for removing of bulged material and worn out pixel removing L-602

Welding electrode for material filling in worn out portion of arm, jaw and axle housing and developing of pixels. L-205

Replacement of Rub plate( 758TH21066) Both sides

Repairing of slider cylinder and seal Kit replacement (34911231000)

Replacement of PIN(758TH11281)

Replacement of Hose(758PH91043)

Replacement of Hose(758PH91019)

Grinding stone for finishing of job.

Hiring cost of grinding machine, jigs and fixture.

Supervisor- (01 person per shift x 04 days)

Welder – (02 person per shift X 04 days)

Fitter – (01 person per shift X 04 days)

Helper – ( 02 person per shift X 04 days)

Contractor profit @ 10% (excluding manpower cost of Part A1+A2+A3 + B

Total impact of GST for the purpose of CTC

M/S MD IBRAHIM

Ayan Enterprises