Construction of Fatehpur to Badiali via Kundial Theru Sunet Barel Lower Takwal Dhiman Mohalla road from km 0.00 to km 6.690 SH Formation cutting filling Retaining Walls Breast Walls W Type metal crash barrier

Excavation for road way in hilly areas in all heights and depths and in all kinds of soil by manual/ mechanical means, including saturated soil comprising of ordinary soil, ordinary rock, soft rock, hard rock chiseling or wedging out rock (where blasting is prohibited) and their intermediate classification of soil complete including setting out true to the required lines grades, cutting width and trimming of side slopes, camber, super elevation and levels as shown in the drawings and as directed by the Engineer-in Charge complete according to the MORD Technical Specification Section 300 and 1600 and sorting out and stacking of useful materials with in all leads and lifts of material in acquired road width and transporting of un-useful materials for filling in road ways, camber, embankments for grade improvements and disposal of all surplus materials to the approved dumping sites through all modes of transportation including head load or animal transport or by mechanical means including leveling, fine dressing and carriage of machineries, materials, tools, equipments and safety measures and other incidentals necessary to complete the work by mechanical means and labour if required.All useful material such as stones shungle, aggregate and slates etcetra shall be sorted out and stacked in proper stack. Recovery of stones to the tune of 1573.70 cubic meter quantity at the rate of Rs. 300/- only (Rupees three hundred only) per cubic meter shall be effected from the contractor running bills on pro-rata basis as per actual quantity executed. Any loss to the public/private property during the course of execution shall be the absolute responsibility of the contractor which shall have to be compensated by him to the extent of damage occurred in all cases. The rate is including octroi, royality, Malkana, toll tax or any other taxes imposed by the Government but excluding GST.

Construction of embankment with approved materials deposited at site from roadway cutting and excavation from drain and foundation of other structures graded and compacted to meet requirement including setting out, true to the lines, grades, width and side slopes in accordance with drawing including spreading the embankment material with motor grader in successive layer of in layer 200mm (two hundred millimetre) uniforms thickness and compacting with vibratory roller 8-10 ( eight to ten) tonne static weight to meet requirement of Tables 300.1 and 300.2 as per MORD Technical Specification section 300 & 1600 and as per direction of Engineer-in-charge including carriage of materials within all leads, lifts and other incidentals. The rate is including octroi, royality, Malkana, toll tax, and any other taxes imposed by the Government but excluding GST.

Earth work in excavation for all type of road structure such as retaining walls, breast walls, culverts, drain and Parapets etcetra in all type of classification of soil comprising of ordinary soil, ordinary rock, hard rock chiseling /wedging out rocks (Where blasting is prohibited) as per drawings and M.O.R.D. technical specification section 300 and 1600 and as per direction of the Engineer- In – Charge including setting out, construction of shoring and bracing, removal of stumps and other deleterious materials and disposal of materials upto any lead and lift including dressing of sides, bottom and back filling in trenches with excavated suitable approved material to the original surface in layer not executing 150 mm (one hundred fifty millimetre) compacted thickness including shoring and strutting and pumping and bailing out water (surface and sub soil water ) upto any depth any quantam of water including cleaning of slush which may arise out during dewatering complete as per direction of Engineer-in-Charge. Including carriage of materials within all leads, lifts and other incidentals. The rate is including octroi, royality, Malkana, toll tax, and any other taxes imposed by the Government but excluding GST.

Providing and laying mechanically mixed and vibrated plain cement concrete in all type of structure as per drawing and MORD technical specification section 800, 900 ,1200 and 1600 for nominal mix 1: 4: 8 (one cement isto four sand isto eight graded crushed/broken stone aggregate 40mm (forty millimetre) nominal size and curing complete including pumping or bailing out water, dewatering, removal of slush as required at site which may arise at the time of laying concrete complete for all heights/depths including the cost of form work in retaining walls, breast walls etcetera as per the direction of Engineer-in-Charge including carriage of materials, within all leads, lifts and other incidentals. The rate is including octroi, royality, Malkana, toll tax, and any other taxes imposed by the Government but excluding GST.

Back filling with granular material behind abutments, wing walls, return walls and retaining walls complete as per drawing and M.O.R.D. technical specifications section 1200 and 1600 and as per direction of Engineer – in- Charge including carriage of materials within all leads, lifts and other incidental . The rate is including octroi, royality, Malkana, toll tax, and any other taxes imposed by the Government but excluding GST.

Providing and laying 100mm (one Hundred millimetre) diametre with working pressure not less than 4.000 kg/ cm (four point zero kilogram per centimetre square) ISI marked PVC pipe weep holes in brick masonry/stone masonry, plain reinforced concrete, Abutments, Wing walls, Return walls and retaining/breast walls extended through the full width of the structure with slope I(V):20(H)(One vertical : Twenty Horizontal) towards draining face complete as per drawing and MORD technical specification section 700 and 1200 and as per direction of Engineer-in-charge including carriage of materials within all leads, lifts and other incidentals. The rate is including octroi, royality, Malkana, toll tax or any other taxes imposed by the Government but excluding GST.

Providing and laying of boulder apron laid in wire crates with 4 mm (four millimetre) dia GI wire conforming to IS:280 and IS:4826 in 100 mm x 100 mm (one hundred millimetre into one hundred millimetre) mesh (woven diagonally) including 10 % (ten percent) extra for laps and joints laid with stone boulders weighing not less than 40 kg (forty kilogram) each as per drawing and MORD technical specifications section 1300 including carriage of materials within all leads, lifts and other incidental . The rate is including octroi, royality, Malkana, toll tax, and any other taxes imposed by the Government but excluding GST.

Providing and errecting a " W" metal beam crash barrier comprising of 3 mm (three millimetre) thick corrugated sheet metal beam rail, 70 cm (seventy centimetre) above road/ Ground level fixed on I.S.M.C. series channel vertical post 150 x 75 x 5 mm (one hundred fifty into seventy five into five millimetre) spaced 2 m (two metre) centre to centre 1.8 m (one point eight metre) high, 1.1 m (one point one metre) below ground/ road level, all steel part and fitments to be galvanised by hot dip process. All fitting to conforms to I.S 1367 and I.S. 1364 metal beam rail to be fixed on the vertical post with spacer of channel section 150x75x5mm (one hundred fifty into seventy five into five millimetre), 330 mm (three hundred thirty millimetre) long complete as per MORTH technical specification section 800 and as per the direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidental. The rate is including octroi, royality, Malkana, toll tax or any other taxes imposed by the Government but excluding GST.

Providing and laying mechanically mixed and vibrated concrete for plain cement concrete in open foundation for all type of structure complete using nominal mix 1: 3: 6 ( One cement isto three sand isto six graded crushed/broken stone aggregate 40mm (Forty millimetre) nominal size on ground or under water and curing complete including pumping or bailing out water, dewatering removal of slush as required at site which may arrise at the time of laying concrete complete for all heights/ depths including the cost of form work as per drawings and M.O.R.D. technical specification section 800, 900 and 1200 as per the direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidental. The rate is including octroi, royality, Malkana, toll tax, or other taxes imposed by the Government but excluding GST.

Providing and laying mechanically mixed and vibrated plain cement concrete grade M-15 (M-Fifteen) nominal mix 1:2½:5 (One cement : Two and half sand : five graded crushed stone aggregate 40mm (Forty millimetres) nominal size) on ground or under water and curing complete including pumping or bailing out water complete for all heights/depths including cost of form work in craddle bedding type- A as per drawing and MORD technical specification section 800, 900 and 1100 including carriage of materials with in all leads, lifts and other incidental, as per the entire satisfaction and directions of Engineer-in-Charge . The rate is including octroi, royality, Malkana, toll tax, and any other taxes imposed by the Government but excluding GST.

Providing and laying mechanically mixed and vibrated plain cement concrete in sub structure grade M-15 (M-fifteen) design mix with cement contents not less than 275kg (two hundred seventy five kilogram per cubic metre) with 40mm (forty millimetre) nominal size graded stone aggregate on ground or under water including curing complete including pumping or bailing out water de-watering removal of slush as required at site, which may arises at the time of laying concrete complete for all heights/depths including cost of form work in parapets and toe wall etcetra as per drawing and MORD technical specification section 800, 900 and 1200 including carriage of materials within all leads, lifts and other incidental and as per the entire satisfaction and directions of Engineer-in-Charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding GST.

Providing and laying mechanically mixed and vibrated concrete for plain cement concrete in sub structure using concrete grade M-20 ( M-Twenty) design mix with cement contents not less than 330 Kgs (Three hundred thirty kilograms) per cubic metre with 40mm (Forty milimetres) nominal size graded crushed stone aggregate as per drawings and M.O.R.D. technical specifications section 800, 900 & 1200 including the cost of form work and curing complete including carriage of materials within all kinds of leads, lifts and other incidental and as per the entire satisfaction and directions of Engineer-in-Charge. The rate is including octroi, royality, Malkana, toll tax, and any other taxes imposed by the Government but excluding GST.

Providing and laying mechanically mixed and vibrated reinforced cement concrete in sub-structure using grade M-20 ( M-Twenty) designed mix with cement contents not less than 350kg (three hundred fifty kilogram) per cubic metre with 20mm(Twenty milimetres) nominal size graded crushed stone aggregate as per drawings and M.O.R.D. technical section 800, 900 and 1200 including the cost of form work but excluding the cost of reinforcement for reinforced concrete work in bed block and dirt wall etcetra and curing complete including carriage of materials with in all kinds of leads, lifts and other incidental and as per the entire satisfaction and directions of Engineer-in-Charge. The rate is including octroi, royality, Malkana, toll tax, and any other taxes imposed by the Government but excluding GST.

Providing and laying mechanically mixed and vibrated reinforced cement concrete grade M-25 (M-Twenty five) designed mix with cement contents not less than 400 Kgs(Four hundred kilograms) per cubic metre with 20mm(Twenty milimetres) nominal size graded crushed stone aggregate (extra cement as per design mix above the minimum cement contents specified shall not be paid extra) in deck slab including cost of form work complete as per drawings and MORD technical specifications clause 1205.04 and 1205.05 and as directed by the Engineer-In-charge including carriage of material within all leads, lifts and other incidentals. The rate is including octroi, royality, Malkana, toll tax and any other taxes imposed by the Government but excluding GST.

Providing and laying mechanically mixed and vibrated reinforced cement concrete Grade-M-30 (M-Thirty) designed mix with cement contents not less than 430 kgs. (four hundred thirty kilograms) per cubic meter with 20mm (twenty millimeter) nominal size graded crushed stone aggregate in Wearing Coat including cost of reinforcement for reinforced concrete work form work and curing complete, as per drawing and MORD technical specification section 800, 900, 1000 and 1400 and as directed by the Engineer-In-charge including carriage of material within all leads, lifts and other incidentals. The rate is including octroi, royality, Malkana, toll tax and any other taxes imposed by the Government but excluding GST.

Supplying fitting and placing HYSD bar reinforcement (Fe-500 D) in sub structure complete as per drawing and M.O.R.D. technical specifications section 1000 and 1200 including cutting, bending, binding and placing in position complete in all respect including cost of binding wire upto any height / depths as per the directions of the Engineer-in-Charge including carriage of materials within all leads, lifts and other incidental. The rate is including octroi, royality, Malkana, toll tax or any other taxes imposed by the Government but excluding GST.

Supplying fitting and placing HYSD bar reinforcement (Fe-500 D) in super structure complete as per drawing and M.O.R.D. technical specifications section 1000 and 1400 including cutting, bending, binding and placing in position complete in all respect including cost of binding wire as per the directions of the Engineer-in-Charge including carriage of materials within all leads, lifts and other incidental. The rate is including octroi, royality, Malkana, toll tax or any other taxes imposed by the Government but excluding GST.

Providing and laying rubble stone flooring in cement mortar 1:3 (one cement isto three sand) laid over cement concrete bedding M-15 (M-fifteen) inclusive of its cost complete as per drawing and M.O.R.D. technical specifications section 1300 including carriage of materials with in all leads, lifts and other incidental and as per the entire satisfaction and directions of Engineer-in-Charge. The rate is including octroi, royality, Malkana, toll tax or any other taxes imposed by the Government but excluding GST.

Providing and laying (to level or slope) 900mm dia (nine hundred millimetres) diameter reinforced cement concrete heavy duty non pressure pipes IS Class NP3 for culverts on first class bedding of granular material in single row including providing and fixing collar with cement mortar 1 : 2 ( One cement : two sand) but excluding the cost of excavation, protection works, back filling, concrete bedding and masonry work in head walls and parapets as per drawing and M.O.R.D. technical specifications section 1100 and as per direction of Engineer – in- Charge including carriage of materials within all leads, lifts and other incidental . The rate is including octroi, royality, Malkana, toll tax, or other taxes imposed by the Government but excluding GST.

Construction of RCC railing of M-25 (M-Twenty five) grade in cast-in- situ with 20mm (Twenty millimeters) nominal size aggregate true to line and grade, tolerance of vertical railing post not to exceed 1 in 500, (one in five hundred) centre to centre spacing between vertical post not to exceed 2000mm (Two thousand millimeters) leaving adequate space between vertical post for expansion including the cost of form work and reinforcement complete as per drawing and MORD technical specification section 800,900,1000 and 1200 or as per the entire satisfaction and direction of the Engineer-in-Charge including carriage of materials within all leads, lifts and other incidental. The rate is including octroi, royality, Malkana, toll tax or any other taxes imposed by the Government but excluding GST.

Construction of subgrade and earthen shoulders with approved material obtained from borrow pits with in all lifts and leads, transporting to site, spreading, grading by mechanical means to required slope and compacted with three wheel 80-100 (eighty - one hundred) kN static roller to meet requirement of Table 300.2 complete as per MORD technical Specification section 400 and as per direction of Engineer-in-charge including carriage of materials within all leads, lifts and other incidentals. The rate is including octroi, royality, Malkana, toll tax, and any other taxes imposed by the Government but excluding GST.

Construction of granular sub-base by providing well graded materials, as per table 401spreading in uniform layers with tractor mount grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with three Wheel 80-100 (Eighty-hundred) kN static roller to achieve the desired density, complete as per MORD Technical Specification section 400 for grading-I Material, as per the entire satisfaction and directions of Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is including octroi, royality, Malkana, toll tax, and any other taxes imposed by the Government but excluding GST.

Providing, laying, spreading and compacting by mechanical means crushed stone aggregate size 63mm to 45mm ( sixty three millimetre to forty five millimetre) Grading-II [75mm ( seventy five millimetres) consolidated thickness) to water bound Macadam specification including spreading in uniform thickness using template, hand packing, rolling with three wheel 80-100 (eighty to one hundred) K.N. static roller in stages to proper grade and camber including applying and brooming, stone screening type-B of size 11.2mm ( eleven point two milimetres) nominal size at the rate of 0.20 cum ( zero point two zero cubic metres) per ten square metres and binding material at the rate of 0.06 cum ( zero point zero six cubic metre) per ten square metre to fill up the interstices of coarse aggregate, watering and compacting to the required density as per M.O.R.D. technical specifications section 400 and as per the entire satisfaction and direction of Engineer – in- Charge including carriage of materials within all leads, lifts and other incidental The rate is including octroi, royality, Malkana, toll tax, and any other taxes imposed by the Government but excluding GST.

Providing, laying, spreading and compacting by mechnical means of crushed stone aggregate size 53mm to 22.4mm ( fifty three millimetre to twenty two point four millimetre) Grading-III [75mm( seventy five millimetres) consolidated thickness] to water bound Macadam specification including spreading in uniform thickness using template, hand packing, rolling with three wheel 80-100 K.N. (eight to one hundred) static roller in stages to proper grade and camber, including applying and brooming, stone screening type-B of size 11.2mm ( eleven point two milimetres) nominal size at the rate of 0.18cum (zero point one eight cubic metres) per ten square metres and to fill up the interstices of coarse aggregate, watering and compacting to the required density as per M.O.R.D. technical specifications section 400 and as per the entire satisfaction and direction of Engineer – in- Charge including carriage of materials within all leads, lifts and other incidental. The rate includes octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding GST.

Providing and applying primer coat with bitumen emulsion (SS-1) on the prepared surface of granular base including cleaning of road surface with Hydraulic brooms and spraying primer with bitumen emulsion pressure distributer at the rate of 0.85 Kg. (Zero point eight five kilogram) per square metre as per M.O.R.D. technical specifications section 500 as per the entire satisfaction and directions of Engineer – in- Charge including carriage of materials within all leads,lifts and other incidentals . The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding GST.

Providing and applying tack coat with bitumen emulsion (RS-I) on the prepared bituminious surface including cleaning the road surface with hydraulic brooms and spraying with emulsion pressure distributor at the rate 0.275 kg (zero point two seven five kilogram) per square meter treated with primer complete as per MORD Technical specification section 500 and as per the entire satisfaction and direction of Engineer-in-Charge including carriage of materials with in all leads, lifts and other incidentals. The rate is including Royality, Malkana, Octroi, toll tax, GST or any other taxes imposed by the Government.

Providing , laying and rolling of open graded premix carpet of 20mm (Twenty millimeter) compacted thickness, composed of Type-A 13.2mm (Thirteen decimal two millimeter) to 5.6mm (Five point six millimeter) aggregate at the rate 0.27cum. (Zero point two seven cubic meter) per ten square meter mixed with bitumen VG-30 (Viscosity grade thirty) at the rate of 14.60 kg. (fourteen point six zero kilogramme) per ten square meter laid on road surface to required line, grade and level to serve as wearing course on a previously prepared base, including mixing and heating binder and aggregate in Hot mix Plant 30/40 (thirty/forty) tonne per hour capacity, transporting mixed material with tipper to site of work by mechanical means and laying with paver finisher to the required grade and camber and rolling with a three wheel 80-100 (eighty-one hundred) KN static road roller, finished to required level and grades excluding the cost of tack coat inclusive of all corrective measures such as laying of profile corrective coarse for all depth and construction of super elevation and camber, where required as per MORD Technical Specification section 500 complete in all respect and as per the direction of Engineer-in-Charge including carriage of matrial within all leads, lifts and other incidentals. The rate is including octroi, royality, toll tax, or other taxes imposed by the Government excluding GST.

Providing and laying seal coat for sealing the voids in a bituminous surface laid to the specified level, grade and cross fall using type-B as per MORD technical specification section-500 premixed with 6.80 Kg.(Six decimal eight zero kilogramme) penetration grade bitumen VG-10 (Ten) with 0.06 (Zero point zero six) cubic meter fine aggregate per 10(ten) square meter heated in mini hot mix plant and laying manually of mixed material and rolling with power road roller 8-10 (Eight to ten tonne capacity) including carriage of material labour and equipment required to execute the work to the site of work complete in all respect with in all leads, lifts as per the entire satisfaction and direction of Engineer -in -Charge. The rate is including octroi, royality, Malkana, toll tax or any other taxes imposed by the Government but excluding GST.

Construction of un-reinforced, dowel jointed at expansion and construction joint only, plain panelled cement concrete pavement, thickness as per design, over a prepared sub base, with 43 (forty three) grade cement and any other type as per Clause 1501 M30 (M-thirty) Grade, coarse and fine aggregates conforming to IS:383, maximum size of coarse aggregate not exceeding 25 mm (twenty five millimetre), mixed in a concrete mixer of not less than 0.2 (zero point two) cum capacity and appropriate weigh batcher using approved mix design, laid in approved fixed side formwork (steel channel, laying and fixing of 125 (one hundred twenty five) micron thick polythene film, wedges, steel plates including levelling the formwork as per drawing), spreading the concrete with shovels, rakes, compacted using needle, screed and plate vibrators and finished in continuous operation including provision of contraction and expansion, construction joints, applying debonding strips, primer, sealant, dowel bars, near approaches to bridge/culvert and construction joints, admixtures as approved, curing of concrete slabs for 14 (fourteen) days, using curing compound (where specified) and water finishing to lines and grade as per drawing and MORD Technical Specification section 1500 as per the direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidental. The rate is including octroi, royality, Malkana, toll tax or any other taxes imposed by the Government but excluding GST.

Providing and laying heavy duty precast cement concrete 80mm (eighty millileter) thick interlocking paver blocks vibro compacted upto M-50 (M-fifty) grade including M-30 (M-thirty) grade concrete edge block 300mm x300mm x150mm (three hundred into three hundred into one hundred firfty millimeter)of gray or coloured shade. Interlocking concrete block pavement shall consist of surface layer of appropriate sized concrete paving blocks paved and compacted over 25mm (twenty five millimeter) thik bedding sand layer of specified grading, which is spread over a properly constructed and profile base course and is bounded by properly installed edge restraints. The joint shall be filled by fine sand of specified grading. The concrete paving block shall conform to the relevant IRC code and MORD technical specification section 1500 including carriage of material within all leads, lift and other incidantal. The rate is including octroi, royality, Malkana, toll tax or any other taxes imposed by the Government but excluding GST.

Providing and laying mechanically mixed and vibrated concrete for plain cement concrete in open foundation for all type of structure complete using nominal mix 1: 3: 6 ( One cement isto three sand isto six graded crushed/broken stone aggregate 20mm (Twenty millimetre) nominal size on ground or under water and curing complete including pumping or bailing out water, dewatering removal of slush as required at site which may arrise at the time of laying concrete complete for all heights/ depths including the cost of form work as per drawings and M.O.R.D. technical specification section 800, 900 and 1200 as per the direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidental. The rate is including octroi, royality, Malkana, toll tax, or other taxes imposed by the Government but excluding GST.

Reinforced cement concrete M-15 (M-fifteen) grade 5th (fifth) Kilometre stone (Precast) of standard design as per IRC :8 fixing in position including painting and printing etcetera as per drawing and MORD technical specification section 1700 and as per the directions of the Engineer-in-Charge including carriage of material, within all leads, lifts and other incidentals. The rate is including octroi, royality, Malkana, toll tax, and any other taxes imposed by the Government but excluding GST.

Reinforced cement concrete M-15 (M-fifteen) grade One Kilometer Stone (Precast) of standard design as per IRC :8 fixing in position including painting and printing etcetera as per drawing and MORD technical specification section 1700 and as per the directions of the Engineer-in-Charge including carriage of material, within all leads, lifts and other incidentals. The rate is including octroi, royality, Malkana, toll tax, and any other taxes imposed by the Government but excluding GST.

Reinforced cement concrete M-15 (M-fifteen) grade 200m (two hundred metre) Stone (Precast) of standard design as per IRC :8 fixing in position including painting and printing etcetera as per drawing and MORD technical specification section 1700 and as per the directions of the Engineer-in-Charge including carriage of material, within all leads, lifts and other incidentals.The rate is including octroi, royality, Malkana, toll tax, and any other taxes imposed by the Government but excluding GST.

Providing and fixing Reinforced cement concrete Boundary pillar/Guard stone of standard design as per IRC:25 fixed in position including finishing and lettering but excluding painting as per drawing and MORD Technical specification section 1700 and as per direction of Engineer-In-Charge, including carriage of materials within all leads, lifts and other incidentals.The rate is including octroi, royality, Malkana, toll tax or any other taxes imposed by the Government but excluding GST.

Providing and fixing of semi-reflective cautionary, mandatory and informatory sign board 900mm (six hundred millimeter) equilateral triangle as per IRC-67 made of 1.5 mm (one point five millimeter) thick MS-sheets duly stove enameled paint in white colour in front and gray colour on back with red reflective border of 65mm (sixty five millimeter) width and required letters and figures with reflective tape engineering grade as per section 1700 of MORD for Rural Roads of required shade and colour supported and welded on 47mm x 47mm of 12 SWG (forty seven millimeter into forty seven millimeter of twelve standard wire gauge) sheet square tube firmly fixed to the ground by mean of properly designed foundation with M-15 grade (M-fifteen grade) cement concrete 450mm x 450mm x 600mm (four hundred fifty into four hundred fifty into six hundred millimeter) 600mm (six hundred millimeter) below ground level as per drawings and MORD technical specification section 1700 including painting angle iron post with primer and to post of Epoxy paint as per specification and as per the direction of Engineer-in-Charge including carriage of materials within all leads, lifts and other incidentals.The rate is including octroi, royality, Malkana, toll tax or any other taxes imposed by the Government but excluding GST.

Providing and erecting 600mm (six hundred millimeter) circular cautionary/ mandatory/ informatory sign boards or retro reflectorised sign as per IRC:67 made of encapsulated lens type reflective sheeting, fixed over aluminium sheeting 1.5mm (one point five millimeter) thick ( The aluminium sheeting shall be provided with duly painted 25x25x3mm (twenty five into twenty five into three millimeters) angle iron frame along its periphery) supported on a mild steel angle iron posts 75x75x6mm (seventy five into seventy five into six millimeter) fixed to the ground by means of of properly designed foundation in concrete block of grade M-15 (M-fifteen) nominal mix of size 450x450x600mm (four hundred fifty into four hundred fifty into six hundred millimeter) whereas the cement concrete block will be 600mm (six hundred millimeter) below the ground level, complete as per MORD technical specification section 1700 and as per the directions of the Engineer-in-Charge including carriage of materials within all leads, lifts and other incidentals.The rate is including octroi, royality, Malkana, toll tax or any other taxes imposed by the Government but excluding GST.

Providing and erecting direction and place identification signs board upto 090 sqm (zero point ninty) square meter of retro reflctorised sign as per IRC:67 made of encapsulated lens type reflective sheeting, fixed over aluminium sheeting 2mm (two millimeter) thick ( The aluminium sheeting shall be provided with duly painted 25x25x3mm (twenty five into twenty five into three millimeters) angle iron frame along its periphery) supported on a mild steel angle iron posts 75x75x6mm (seventy five into seventy five into six millimeter) fixed to the ground by means of of properly designed foundation in concrete block of grade M-15 (M-fifteen) nominal mix of size 450x450x600mm (four hundred fifty into four hundred fifty into six hundred millimeter) whereas the cement concrete block will be 600mm (six hundred millimeter) below the ground level, complete as per MORD technical specification section 1700 and as per the directions of the Engineer-in-Charge including carriage of materials within all leads, lifts and other incidentals.The rate is including octroi, royality, Malkana, toll tax or any other taxes imposed by the Government but excluding GST.

Providing and erecting direction and place identification signs board upto 0.90 sqm (zero point ninty) square meter of retro reflctorised sign as per IRC:67 made of encapsulated lens type reflective sheeting, fixed over aluminium sheeting 2mm (two millimeter) thick ( The aluminium sheeting shall be provided with duly painted 25x25x3mm (twenty five into twenty five into three millimeters) angle iron frame along its periphery) supported on a mild steel angle iron posts 75x75x6mm (seventy five into seventy five into six millimeter) fixed to the ground by means of of properly designed foundation in concrete block of grade M-15 (M-fifteen) nominal mix of size 450x450x600mm (four hundred fifty into four hundred fifty into six hundred millimeter) whereas the cement concrete block will be 600mm (six hundred millimeter) below the ground level, complete as per MORD technical specification section 1700 and as per the directions of the Engineer-in-Charge including carriage of materials within all leads, lifts and other incidentals.The rate is including octroi, royality, Malkana, toll tax or any other taxes imposed by the Government but excluding GST.

Providing and Laying of Hot applied thermoplastic compound road marking paint 2.5mm (two decimal five millimetre) thick with refletorising glass beads at the rate 250 gram (two hundred fifty) gram per square metre area, thickness of 2.5mm (two decimal five millimetre) is exclusive of surface applied glass beads as per specificaiton and with strips of 0.10 (Zero decimal one) metre width in centre lines or edge lines of the road as per the directions of Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is including octroi, royality, Malkana, toll tax, and any other taxes imposed by the Government but excluding GST.

Providing and Fixing pavement marker (Cat eyes) made out of ABS 3 M (three) plastic of size 128x110x29.5 mm ( one hundred twenty eight into one hundred ten into twenty nine decimal five millimetres) without nail having 50mm ( fifty millimetres) stem of ABS. The pavement marker shall be installed with epoxy ABS as per specification including carriage of materials and equipment with all mode of transportation and as per direction of Engineer – in- Charge including carriage of materials within all leads, lifts and other incidental . The rate is including octroi, royality, Malkana, toll tax, or other taxes imposed by the Government but excluding GST.

Providing and fixing of road studs 100 x100 mm (one hundered into one hundered milimeter) die cast in aluminium, resistant to corrosive effect of salt and grit, fitted with lens reflectors, insatlled in concrete or asphalti surface by drilling holes 30 mm (thirty millimeter) upto depth 600 mm (six hundered millimeter) and bedded in a suitable bituminious grout or epoxy mortar, all as per BS:873( Part4) 1973 as per drawing and MORD technical specification section 1700 including carriage of materials and equipment with all mode of transportation and as per direction of Engineer – in- Charge including carriage of materials within all leads, lifts and other incidental . The rate is including octroi, royality, Malkana, toll tax or any other taxes imposed by the Government but excluding GST.

Provision of 15 Nos (Fifteen number) rumble strips covered with premix bituminous carpet, 15-20 mm (fifteen to twenty millimetre) high at centre, 250 mm (two hundred fifty millimetre) wide placed at 1 m (one metre) centre-to-centre at approved locations to control speed, marked with white strips of road marking paint complete in all respect or as directed by the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is including octroi, royality, Malkana, toll tax and any other taxes imposed by the Government but excluding GST.