Civil and Structural works for Revamping of Steam and Power System (RSPS#2) in Phase I at TNPL Unit I (Part 2)

Amount

EARTH WORK EXCAVATION IN ALL SOILS AND SUB SOILS EXCLUDING ROCK INCLUDING BACKFILLING IN SIDES OF FOUNDATIONS AND BASEMENT, WATERING, CONSOLIDATION, INCLUDING DEWATERING WHEREVER NECESSARY, ETC., AND DISPOSING OFF THE SURPLUS EARTH WITHIN A LEAD OF 40 MTRS AS DIRECTED IN DEPTH FROM GROUND LEVEL TO -2 MTR

EXCAVATE AND REMOVE ROCK AT ALL LEVELS BY CHISEL AND HAMMER OR USING MACHINERY BUT BLASTING NOT PERMITTED (40% VOIDS TO BE DEDUCTED IN CASE OF STACK MEASUREMENT) INCLUDING DEWATERING AND DISPOSE OFF WITHIN A LEAD OF 40 MTR AS DIRECTED.

TRANSPORT EXCAVATED EARTH AND REFILLING THE FOUNDATION IN LAYERS, LOADING, UNLOADING, SPREADING, LEVELING, WATERING, CONSOLIDATION, ETC., AS DIRECTED UPTO A LEAD OF 2 KM. (25% VOIDS TO BE DEDUCTED IN LORRY/TRACTOR MEASUREMENTS)

EARTH CUTTING, TRANSPORTATION WITHIN THE PREMISES, UNLOADING, SPREADING, LEVELLING AND CONSOLIDATION WITH 10MT ROAD ROLLER TO A LEAD OF 2KM.

CEMENT CONCRETE 1:4:8 USING 25MM DOWN GAUGE BLUE GRANITE AGGREGATE IN FOUNDATIONS, MUD MAT, FLOORING EXCLUDING SHUTTERING BUT INCLUDING RAMMING, LEVELLING, CURING ETC., COMPLETE.

CEMENT CONCRETE M30 USING 20MM SIZE BLUE GRANITE AGGREGATE FOR ALL CEMENT CONCRETE ITEMS SUCH AS FOUNDATIONS, PEDESTALS, COLUMNS, WALLS, SHELL WALL, FOOTING, RAFT, PLINTH BEAM, ETC., EXCLUDING SHUTTERING BUT INCLUDING LEVELLING, CURING, ETC., COMPLETE BELOW GROUND LEVEL AND UPTO FFL.

CEMENT CONCRETE M30 USING 20MM SIZE BLUE GRANITE AGGREGATE FOR ALL CEMENT CONCRETE ITEMS SUCH AS COLUMN, BEAM, SUNSHADE, SHELL WALL, ROOF SLAB, STAIRCASE ETC., EXCLUDING SHUTTERING BUT INCLUDING LEVELLING, CURING, ETC., COMPLETE ABOVE FFL TO +7 MTR LEVEL.

CEMENT CONCRETE M30 USING 20MM SIZE BLUE GRANITE AGGREGATE FOR ALL CEMENT CONCRETE ITEMS SUCH AS COLUMN, BEAM, SUNSHADE, SHELL WALL, ROOF SLAB, STAIRCASE, ETC., EXCLUDING SHUTTERING BUT INCLUDING LEVELLING, CURING, ETC., COMPLETE ABOVE +7 MTR TO +14 MTR LEVEL.

CEMENT CONCRETE M30 USING 20MM SIZE BLUE GRANITE AGGREGATE FOR ALL CEMENT CONCRETE ITEMS SUCH AS COLUMN, BEAM, SUNSHADE, SHELL WALL, ROOF SLAB, STAIRCASE, ETC., EXCLUDING SHUTTERING BUT INCLUDING LEVELLING, CURING, ETC., COMPLETE ABOVE +14 MTR TO +21 MTR LEVEL.

CEMENT CONCRETE M30 USING 20MM SIZE BLUE GRANITE AGGREGATE FOR ALL CEMENT CONCRETE ITEMS SUCH AS COLUMN, BEAM, SUNSHADE, SHELL WALL, ROOF SLAB, STAIRCASE, ETC., EXCLUDING SHUTTERING BUT INCLUDING LEVELLING, CURING, ETC., COMPLETE ABOVE +21 MTR TO +30 MTR LEVEL.

FORM WORK - WROUGHT AND PUT UP WITH GOOD QUALITY MARINE GRADE PLYWOOD FOR ALL TYPES OF SHUTTERING WORKS LIKE FOOTING, RAFT, PLINTH BEAM, ETC., AS "PLASTER FREE FINISH" BELOW GROUND LEVEL AND UPTO FFL.

FORM WORK - WROUGHT AND PUT UP WITH GOOD QUALITY MARINE GRADE PLYWOOD FOR ALL TYPES OF SHUTTERING WORKS LIKE COLUMN, BEAM, SUNSHADE, SHELL WALL, ROOF SLAB, STAIRCASE, ETC., AS "PLASTER FREE FINISH" ABOVE FFL TO +7 MTR LEVEL.

FORM WORK - WROUGHT AND PUT UP WITH GOOD QUALITY MARINE GRADE PLYWOOD FOR ALL TYPES OF SHUTTERING WORKS LIKE COLUMN, BEAM, SUNSHADE, SHELL WALL, ROOF SLAB, STAIRCASE, ETC., AS "PLASTER FREE FINISH" ABOVE +7 MTR TO +14 MTR LEVEL.

FORM WORK IN CIRCULAR / CURVED SURFACES WROUGHT AND PUT UP WITH GOOD QUALITY MARINE GRADE PLYWOOD BY CONVENTIONAL METHOD AND AS "PLASTER FREE FINISH" ETC., BELOW GROUND LEVEL AND UPTO FFL.

FORM WORK IN CIRCULAR / CURVED SURFACES USING GOOD QUALITY OF PLYWOOD BY CONVENTIONAL METHOD, ETC., COMPLETE FROM FFL TO +7 MTR LEVEL.

FORM WORK IN CIRCULAR / CURVED SURFACES USING GOOD QUALITY OF PLYWOOD BY CONVENTIONAL METHOD, ETC., COMPLETE FROM +7 TO +14 MTR LEVEL.

FORM WORK IN CIRCULAR / CURVED SURFACES WROUGHT AND PUT UP WITH GOOD QUALITY MARINE GRADE PLYWOOD BY CONVENTIONAL METHOD AND AS "PLASTER FREE FINISH" ETC., COMPLETE FROM +14 TO +21 MTR LEVEL.

FORM WORK IN CIRCULAR / CURVED SURFACES WROUGHT AND PUT UP WITH GOOD QUALITY MARINE GRADE PLYWOOD BY CONVENTIONAL METHOD AND AS "PLASTER FREE FINISH" ETC., COMPLETE FROM +21 TO +30 MTR LEVEL.

PROVIDING AND FIXING IN POSITION "SLIPFORM" SHUTTERING FOR CIRCULAR CHIMNEY / SILO WALL INCLUDING COST OF SPECIAL SHUTTERING HYDRAULIC JACK, PLATFORM, LIFTING ROD ETC., TO BE PROVIDED BY CONTRACTOR AND RENDERING THE CONCRETE WALLS FROM FFL TO REQUIRED HEIGHT AS PER THE DRAWING.

TAKE DELIVERY OF HIGH STRENGTH RIBBED DEFORMED BARS/ MS BARS ISSUED BY TNPL FREE OF COST, CUT, BEND AND TIE UP IN POSITION INCLUDING COST OF SUPPLYING NECESSARY 18 GAUGE BINDING WIRE FOR ALL TYPES OF RCC WORKS AT ALL LEVELS.

PROVIDING COURSED RUBBLE STONE MASONRY WITH POINTING WORKS, SECOND SORT IN CEMENT MORTAR 1:7 WITH THROUGH BOND STONES 2 MTRS APART IN EACH COURSE, PLACED IN A STAGGERED PATTERN AND COURSE NOT LESS THAN 150MM HIGH WITH FACE STONES PLACED HEADERS AND STRETCHERS ALTERNATIVELY TO BREAK JOINTS BY ATLEAST 75MM INCLUDING CURING ETC., COMPLETE FOR FOUNDATION BASEMENT UPTO +1.00 MTR LEVEL.

SUPPLY AND LAYING OF FLY ASH BRICKS IN CM 1:6 IN FOUNDATIONS AND BASEMENT UPTO +0.00 MTR INCLUDING CURING, ETC., COMPLETE.

SUPPLY AND LAYING OF FLY ASH BRICKS IN SUPER STRUCTURE IN CM 1:6 INCLUDING SCAFFOLDING, CURING ETC., COMPLETE ABOVE +0.00 MTR TO +7.00 MTR

SUPPLY AND LAYING OF FLY ASH BRICKS IN SUPER STRUCTURE IN CM 1:6 INCLUDING SCAFFOLDING, CURING ETC., COMPLETE ABOVE +7.00 MTR TO +14.00 MTR

SUPPLY AND LAYING OF FLY ASH BRICKS IN SUPER STRUCTURE IN CM 1:6 INCLUDING SCAFFOLDING, CURING ETC., COMPLETE ABOVE +14.00 MTR TO +21.00 MTR.

SUPPLY AND LAYING OF FLY ASH BRICKS IN HALF BRICK THICK WALL IN CM 1:4, EXCLUDING PLASTERING, INCLUDING SCAFFOLDING, CURING ETC., COMPLETE AT ALL LEVELS.

SUPPLY AND LAYING OF ECOFRIENDLY INORGANIC POLYMER BASED COOL ROOF TILES WITH HEAT REFLECTIVE AND WATER PROOF (MAKE : PAVIT / RAK / IGLOO) OF SIZE 300 X 300 X 15MM THICK LAID IN BED MORTAR IN CM 1:3, 20 MM THICK AND LAY TO REQUIRED SLOPE AS DIRECTED BY ENGINEER INCHARGE .THE TILE SHALL BE LAYING WITH 4MM SPACER INCLUDING EPOXY POINTING GROUT OF SAME COLOUR REPUTED MAKE AT ALL LEVELS. (SRI > 9 , WATERPROOF RESISTANCE < 3% AND OF COMPRESSIVE STRENGTH 25MPA).COST INCLUDES TILES, SPACER, EPOXY, LABOUR CHARGES ETC., COMPLETE.

PREPARE SURFACES OF BASE COURSE BY REMOVING ALL LOOSE MORTAR BY HACKING AND LAY TO REQUIRED SLOPE 50 MM THICK GRANO FLOOR OF MIX 1:1.5:3 USING 10 TO 12 MM GRANITE CHIPS INCLUDING FINISHING THE TOP LAYER WITH A POWER TROWEL AT ALL LEVELS.

PREPARE SURFACES OF CONCRETE FLOORING AND DO POWER TROWLING FINISH AS DIRECTED BY ENGINEER INCHARGE.

PREPARE SURFACES OF WALLS AND PLASTER INTERIOR, EXTERIOR AND TOP FACES WITH CEMENT MORTAR 1:4, 12MM THICK AT ALL LEVELS INCLUDING NECESSARY SCAFFOLDINGS AND CURING ETC., COMPLETE.

TAKE DELIVERY OF CONBEXTRA GP2 OR EQUIVALENT AND MIX WITH 6MM CHIPS 30% FOR GROUTING OF POCKETS INCLUDING CLEANING, SHUTTERING, COMPACTION, CURING, ETC., COMPLETE AT ALL LEVELS.

SUPPLYING AND FIXING OF VITRIFIED FLOOR TILES OF APPROVED SIZE AND SHADE AND FIXING THEM IN POSITION FOR FLOORS AND SKIRTING WITH BED MORTAR IN CM 1:3, 20MM THICK, PREPARING THE SURFACES AND POINTING THE JOINTS WITH TILE MATE COMPOUND AT ALL LEVELS.

SUPPLYING OF REGENCY MAKE OR EQUIVALENT WALL TILES OF APPROVED SHADE, SIZE AND FIXING THEM IN POSITION FOR WALLS AND SKIRTING WITH BED MORTAR IN CM 1:3, 20MM THICK, PREPARING THE SURFACES AND POINTING THE JOINTS WITH TILE MATE COMPOUND AT ALL LEVELS.

SUPPLY AND FIXING OF COLOURED DESIGN TREAD AND RISER TILES FOR STEPS WITH CEMENT MORTAR 1:3, 20 MM THICK AND POINTING THE JOINTS ETC., COMPLETE.

PROVIDING POCKETS FOR FOUNDATION BOLTS USING SUITABLE WOODEN REMOVAL FORMWORK INCLUDING REMOVING THE SAME WHILE THE CONCRETE IS WET AND FIXING THE FOUNDATION BOLTS FOR MACHINERY FOUNDATIONS ETC., THE SIZE VARIES FROM 150 SQ.MM TO 250 SQ.MM OF DEPTH VARYING FROM 400 MM TO 900 MM (ANY INCREASE IN SIZE AND DEPTH OVER THE ABOVE WILL BE CONSIDERED AND PAID FOR PRORATA BASIS).

PROVIDING POCKETS FOR FOUNDATION BOLTS USING SUITABLE WOODEN REMOVAL FORMWORK INCLUDING REMOVING THE SAME WHILE THE CONCRETE IS WET AND FIXING THE FOUNDATION BOLTS FOR MACHINERY FOUNDATIONS ETC., THE SIZE VARIES FROM 150 SQ.MM TO 250 SQ.MM OF DEPTH VARYING FROM 900 MM TO 1500 MM (ANY INCREASE IN SIZE AND DEPTH OVER THE ABOVE WILL BE CONSIDERED AND PAID FOR PRORATA BASIS).

TAKE DELIVERY OF STRUCTURAL STEEL SUPPLIED BY TNPL FREE OF COST, REMOVE BENDS IF ANY,FABRICATE AS BUILT UP COLUMN, BEAM, ROOF TRUSS & ROOF MONITOR, PURLIN, ETC., AND ERECT IN POSITION WITH MOBILE CRANE OR DERRICK AT ALL LEVELS, INCLUDING COST OF ALL CONSUMABLES LIKE GAS, STANDARD WELDING RODS, BOLTS & NUTS, TOOLS & TACKLES, SCAFFOLDING,ETC., COMPLETE. (AS PER DRAWING)

TAKE DELIVERY OF GI / MS PIPE TO FABRICATE AND ERECT IN POSITION AT ALL LEVELS, AS HANDRAILS USING 25, 32, 40 AND 50MM DIA GI / MS PIPE. HANDRAILS SHALL BE VERTICAL POSTS OF ONE METRE HEIGHT IN PIPE AT AN INTERVAL OF ONE METRE AND TWO HORIZONTAL RAILING ONE AT THE TOP OTHER AT THE MIDDLE OF THE POSTS. THE COST INCLUDES ONE COAT OF RED OXIDE PRIMER AND TWO COATS OF SYNTHETIC ENAMEL PAINT OF APPROVED COLOUR AND MAKE, ETC., COMPLETE.

TAKE DELIVERY OF MS PLATE, MS ANGLES FOR FABRICATION AND FIXING IN POSITION INCLUDING WELDING WITH REINFORCEMENT BARS AS INSERTS/NOZZING ANGLES IN CONCRETE FLOORS, BEAMS, COLUMNS, WALLS, SLABS ETC., COMPLETE AT ALL LEVELS.

ERECTION OF SCAFFOLDING AND CLEANING THE SURFACES OF STRUCTURAL MEMBERS USING WIRE BRUSH, EMERY SHEETS AND APPLY ONE COAT OF RED OXIDE PRIMER OF APPROVED QUALITY AND TWO COATS OF SYNTHETIC ENAMEL PAINT OF EITHER BERGER,ASIAN, SHALIMAR, ICI DULUX OR EQUIVALENT (INDUSTRIAL QUALITY) OF APPROVED COLOUR INCLUDING COST OF ALL MATERIALS,PAINT AND ALL OTHER INCIDENTAL CHARGES ETC.,COMPLETE AT ALL LEVELS.

SUPPLYING AND FIXING IN POSITION OF MS WINDOW GRILL USING 12MM MS SQUARE BARS / MS FLATS / ROUNDS INCLUDING NECESSARY WELDING AND APPROVED DESIGN INSTRUCTED BY ENGINEER INCHARGE INCLUDING APPLYING ONE SHOP COAT OF RED OXIDE PRIMER ETC., COMPLETE.

SUPPLYING AND FIXING OF ALUMINIUM GLAZED DOOR SINGLE LEAF OF SIZES 1.0 X 2.4 MTR OR 1.0 X 2.1 MTR USING FRAMES OF SIZE 63MM X 38MM (1.50MM THICK) AND SHUTTER FRAME OF SIZE 100MM X 40MM BOTTOM (1.50MM THICK) AND ALL OTHER FRAMES OF SIZE 45 X 45MM WITH PANEL IN TWO PARTS COVERED WITH 5MM THICK PLAIN GLASS IN THE TOP PORTION AND 9MM THICK LAMINATED NOVAPAN OR DURATUFF SHEET IN THE BOTTOM PORTION INCLUDING FIXING OF HANDLES, LOCK, ALUMINIUM BEADING, RUBBER GASKET, PIVOT, DOOR CLOSER, ETC., COMPLETE.

SUPPLYING AND FIXING OF ALUMINIUM LOUVERED VENTILATOR OF SIZE 750 X 900 MM WITH ADJUSTABLE LOUVERS USING 5MM THICK FROSTED GLASS RATE INCLUDES ALL CONSUMABLES, LABOUR CHARGES ETC., COMPLETE AT ALL LEVELS.

SUPPLYING AND FIXING OF APPROVED COLOUR COATED ALUMINIUM PARTITION USING FRAME SIZE 63MM X 40MM X 1.5MM THICK BOTH HORIZONTAL AND VERTICAL AT 900MMM INTERVAL AS INSTRUCTED. THE BOTTOM SECTION OF THE PARTITION SHALL BE 100MM X 45MM X 1.5MM THICK.THE PARTITION SHALL BE TWO OR THREE PARTS WITH 5MM THICK GLASS & 9MM THICK NOVAPAN SHEET AS DESIGNED WITH ALUMINIUM BEADING, RUBBER GASKET ETC., COMPLETE AT ALL LEVELS

SUPPLYING AND FIXING OF APPROVED COLOUR COATED ALUMINIUM WINDOW (SLIDING TYPE ) OF FRAME SIZE 63MM X 45MM X 1.5MM THICK WITH NECESSARY LOCKING ARRANGMENT, RUBBER GASKET, BEADING ETC., INCLUDING 5MM THICK PLAIN GLASS FOR THE SAME (MAKE JINDAL OR INDAL SECTION).

PROVIDING AND FIXING OF UPVC DOORS OF SIZE 1.00 M X 2.100M WITH SINGLE LEAF OPENABLE SHUTTERS. THE FRAME MADE OUT OF UPVC PROFILE SECTION OF SIZE 60 X 38MM X 2.2MM THICK WITH SHUTTER FRAME OF STANDARD SECTION 2.2MM THICK. THE DOOR SHUTTER IN TWO PARTS, ONE PART COVERED WITH UPVC SHEET AND ANOTHER PART COVERED WITH 5MM THICK PLAIN GLASS INCLUDING FIXING OF AUTOMATIC HINGES, ALUMINIUM JOINERY FITTINS, LABOUR CHARGES, SCREWS, RUBBER BEADING ETC., COMPLETE

PROVIDING AND FIXING OF UPVC DOORS OF SIZE 1.50 M X 2.100M WITH DOUBLE LEAF OPENABLE SHUTTERS. THE FRAME MADE OUT OF UPVC PROFILE SECTION OF SIZE 60 X 38MM X 2.2MM THICK WITH SHUTTER FRAME OF STANDARD SECTION 2.2MM THICK. THE DOOR SHUTTER IN TWO PARTS, ONE PART COVERED WITH UPVC SHEET AND ANOTHER PART COVERED WITH 5MM THICK PLAIN GLASS INCLUDING FIXING OF AUTOMATIC HINGES, ALUMINIUM JOINERY FITTINGS, LABOUR CHARGES, SCREWS, RUBBER BEADING ETC., COMPLETE

SUPPLYING AND FIXING OF APPROVED COLOUR COATED ALUMINIUM WINDOW (FIXED TYPE ) OF FRAME SIZE 63MM X 45MM X 1.5MM THICK WITH NECESSARY LOCKING ARRANGMENT, RUBBER GASKET, BEADING ETC., INCLUDING 5MM THICK PLAIN GLASS FOR THE SAME (MAKE JINDAL OR INDAL SECTION).

SUPPLYING AND FIXING OF "ARMSTRONG" MAKE FALSE ROOFING WITH MINERAL FIBRE MICRO BOARD (WHITE) OF SIZE 600MM X 600MM X 15MM INCLUDING ALL NECESSARY SUPPORTING SUSPENSION GRID SYSTEMS FROM RCC CEILING, ETC., COMPLETE. TYPE: FINE FISSURE SEKTOR.

SUPPLY AND FIXING OF WPC DOOR SINGLE LEAF OF SIZE 0.75 X 2.10 MTR (OR) 0.90 X 2.10 MTR USING FRAMES OF SIZE 100 MM X 50 MM AND SHUTTER 25 / 30 MM THICK FLUSH DOOR INCLUDING NECESSARY STEEL HINGES, SCREWS, TOWER BOLTS, HANDLES ETC., COMPLETE AS DIRECTED BY ENGINEER INCHARGE.

DISMANTLING OF MUDMAT CONCRETE, PCC1:5:10, GRANO FLOORING, ETC., USING BREAKERS AND DISPOSE OFF WITHIN A LEAD OF 2 KM DISTANCE AS DIRECTED.

DISMANTLING OF RCC M20/M25 CONCRETE WITH BREAKERS AND CUTTING OF THE STEEL REINFORCEMENTS, ETC., AND DISPOSE OFF THE DEBRIS TO A LEAD OF 2 KM APART AS DIRECTED.

DISMANTLING OF RR/CR STONE MASONRY WALLS IN FOUNDATIONS AND SUPER STRUCTURES AND HANDING OVER THE STONES TO CIVIL DEPARTMENT AS DIRECTED ETC., COMPLETE.

FOR SMALL WORKS WHICH IS UNQUANTIFIED EXACTLY, SUPPLY OF ELECTRICAL CONCRETE BREAKER (HILTI MAKE -MODEL NO.1000ADR) WITH LABOUR FOR DISMANTLING OF CONCRETE, BRICK WORK, CR MASONRY, ETC., THE WORK INCLUDES DISPOSAL OF DISMANTLED DEBRIS WITHIN THE LEAD OF 2KM APART AS DIRECTED.

DISMANTLE BRICK MASONRY IN GROUND FLOOR AND DISPOSE OFF WITHIN A INITIAL LEAD OF 40 MTR.

PREPARE SURFACES AND RUBBING WITH CARBORANDUM STONE AND FILLING THE JOINTS WITH CM 1:3 AND APPLY ONE COAT OF CEMENT WASH AT ALL LEVELS INCLUDING SCAFFOLDING, ETC., COMPLETE.

PREPARE SURFACES AND APPLY TWO COATS OF WHITE WASH USING APPROVED MAKE INCLUDING MIXING WITH SUFFICIENT QUALITY OF GUM LIKE FEVICOL ETC., COMPLETE AT ALL LEVELS.

THOROUGHLY PREPARE THE SURFACES OF WALLS AND APPLY TWO COATS OF FIRST QUALITY WALL PUTTY INCLUDING FINISHING SMOOTHLY WITHOUT ANY WAVINESS, ETC., AT ALL LEVELS.

SUPPLY AND APPLICATION OF ONE COAT OF WEATHER PROOF EXTERIOR PRIMER AND TWO COATS OF EXTERIOR EMULSION OF APPROVED COLOUR SHADE INCLUDING SCAFFOLDING, LABOUR ETC., COMPLETE AT ALL LEVELS. (ASIAN OR BERGER).

SUPPLY AND APPLICATION OF ONE COAT OF BIRLA WHITE / JK WHITE OR EQUIVALENT QUALITY OVER WALL OR CEILING SURFACES INCLUDING COST OF SCAFFOLDING, ALL MATERIALS, LABOUR AND OTHER INCIDENTAL CHARGES ETC. COMPLETE AT ALL LEVELS.

SUPPLY AND APPLICATION OF ONE COAT OF WEATHER PROOF PRIMER AND TWO COATS OF INTERIOR EMULSION OF APPROVED COLOUR SHADE INCLUDING SCAFFOLDING, LABOUR ETC., COMPLETE AT ALL LEVELS.

PROVIDING AND FIXING OF 15 MM SIZE CP BIBCOCK OF METRO OR EQUIVALENT APPROVED MAKE.

PROVIDING MANHOLE CHAMBER OF CLEAR SIZE 450MM X 450MM X 750MM HEIGHT WITH NECESSARY EARTH WORK, PCC 1:5:10, 230MM THICK BRICK WORK, PLASTERING INSIDE AND OUTSIDE WITH SMOOTH FINISHING IN CM 1:3, CAST IRON MANHOLE COVER WITH FRAME AND FINISHING INSIDE WITH PROPER SLOPES, ETC., COMPLETE.

SUPPLYING AND FIXING OF 50MM THICK EXPANDABLE FILLER BOARD HD 100 JOINTS AT ALL LEVELS (SUPREME MAKE)

SUPPLY AND FIXING IN POSITION OF STANDARD EWC WITH "P" OR "S" TRAP OF SIZE 570 X 340 X 400MM INCLUDING SEAT COVER AND LOW LEVEL FLUSH TANK OF SLIM LINE MAKE INCLUDING INTERNAL FITTINGS OF PARRYWARE / HINDUSTAN MAKE - WHITE COLOUR, AS DIRECTED INCLUDING FIXING OF CP STOP COCK, WATER CONNECTION ETC., COMPLETE AT ALL LEVELS.

SUPPLY AND FIXING OF SS 304 GRADE FLOOR DRAIN GRATING OF SIZE 6 INCH X 6 INCH WITH NECESSARY FRAME INCLUDING INNER AND OUTER FILTER ARRANGEMENTS AND COCKROACH TRAP.

SUPPLY AND FIXING OF WASH BASIN MIRROR OF SIZE 600 X 450MM MADE UP OF IMPORTED GLASS WITH INDIAN SILVERING WITHOUT ANY WAVINESS WITH PVC BACKING, ETC., COMPLETE AT ALL LEVELS.

SUPPLY AND FIXING OF 2 IN 1 CP MIXER TAP HOT AND COLD 15MM SIZE OF JAQUAR MAKE WITH ALL NECESSARY FITTING AS PER THE INSTRUCTIONS OF ENGINEER IN CHARGE

SUPPLY AND LAYING OF 110MM DIA FINOLEX MAKE PVC PIPES (6 KG/CM2) PRESSURE WITH REQUIRED EARTHWORK OF DEPTH MINIMUM 1 MTR BELOW GROUND LEVEL AND JOINTING WITH NECESSARY SPECIALS AS DIRECTED.

SUPPLY OF 63MM DIA FINOLEX MAKE PVC PIPE OF PRESSURE 6KG/CM2 INCLUDING ALL NECESSARY SPECIALS LIKE BEND, TEE, COUPLING, ELBOW ETC., AND LAYING USING PVC SOLVENT WITH NECESSARY EXCAVATION UPTO TO A DEPTH OF 3 FEET, BACKFILLING, LEVELLING, TESTING ETC., COMPLETE AS PER THE INSTRUCTIONS OF ENGINEER IN CHARGE

SUPPLY AND FIXING OF PVC WATER BAR OF 200MM WIDE OF APPROVED MAKE FOR CONSTRUCTION JOINTS AT ALL LEVELS.

SUPPLY AND FIXING OF CP SHOWER ARM 1/2" X 18" LONG WITH SHOWER ROSE OF APPROVED MAKE INCLUDING ALL NECESSARY FITTINGS, LABOUR ETC., COMPLETE

SUPPLY OF 25MM DIA THREADED U.PVC PIPE 40 SH OF FINOLEX MAKE AND LAYING IN POSITION INCLUDING NECESSARY SPECIALS LIKE BEND, ELBOW, CLAMPING, COUPLING INCLUDING NECESSARY EARTH WORK IN CASE OF UNDER GROUND LINE AND CONCEALING WORKS WHEREVER REQUIRED ETC., COMPLETE.

SUPPLY AND FIXING OF FLAT BACK TYPE URINAL (WHITE COLOUR) OF STANDARD SIZE AND APPROVED MANUFACTURE INCLUDING FIXING OF CP STOP COCK, 12MM PVC WATER CONNECTION, 32MM PVC WASTE PIPE ETC. COMPLETE AT ALL LEVELS.

PROVIDING MARBLE SLAB OF 20MM THICK OF APPROVED SHADE / DESIGN AND FIXING THEM TO MATCH IN POSITION AT URINAL PARTITION WITH BED MORTAR IN CM 1:3, 20MM THICK, PREPARING THE SURFACES AND POINTING THE JOINTS WITH TILE MATE COMPOUND (SUITABLE POINTING MATERIAL IS IN THE SCOPE OF CONTRACTOR).

SUPPLY AND FIXING OF WHITE GLAZED EARTHENWARE WASH BASIN OF SIZE 630 X 450MM OF APPROVED MANUFACTURE WITH CENTRAL 15MM CP PILLAR TAP OF METRO MAKE WITH CI BRACKETS, WOODEN PLUGS 15MM PVC CONNECTION, 15MM CP STOP COCK, 32MM CP WASTE COUPLING AND 32MM PVC WASTE PIPE, ETC., COMPLETE AT ALL LEVELS.

SUPPLY OF 1000 LITRE CAPACITY PVC APPROVED WATER TANK ALONG WITH ACCESSORIES INCLUDING 1" DIA BRASS FLOAT VALVE WITH COPPER BALL AND FIXING IN POSITION WITH NECESSARY CUTTING, THREADING AND JOINTING WORKS IN THE EXISTING INLET OF THE MAIN WATER LINE AT ALL LEVLES AS DIRECTED.

TAKE DELIVERY OF FOUNDATION BOLTS SUPPLIED BY TNPL AT FREE OF COST OF SIZE VARYING FROM M16 / M20 / M25 / M30 / M36 X 750 TO 1000 MM LONG FABRICATE TEMPLATES AND FIXING IN POSITION TO PROPER ALIGNMENT AND LEVEL. THE WORK INCLUDES WELDING TO THE EXISTING MAIN REINFORCEMENT AND TO THE ADDITIONAL REINFORCEMENTS AS ANCHORAGE TO THE FOUNDATION BOLTS AS DIRECTED BY THE SITE INCHARGE.

Bidder Name

Amount in Words

RPP INFRA PROJECTS LIMITED (BID ID -1437679)

PRIYA ENGINEERING PROJECTS PRIVATE LIMITED (BID ID -1434485)

RPP INFRA PROJECTS LIMITED (BID ID -1437679)