Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹9.3 LAccepted-AOC | L1 | Accepted-AOC LOWEST BIDDER | |
| 2 | L2₹10.8 L+₹1.0 L (10.5%)Rejected-Finance 01 POYEN KARGIL LADAKH 194103 | KARGIL | LADAKH | 194103 | L2 | Rejected-Finance Other than lowest bidder | |
| 3 | L3₹11.9 L+₹2.0 L (20.9%)Rejected-Finance 6 GURU GOBIND SINGH NAGAR DHAKOLI DHAKOLI PATIALA PUNJAB 140602 | PATIALA | PUNJAB | 140602 | L3 | Rejected-Finance Other than lowest bidder | |
| 4 | L4₹12.3 L+₹2.5 L (25.2%)Rejected-Finance | L4 | Rejected-Finance Other than lowest bidder | |
| 5 | L5₹12.3 L+₹2.5 L (25.9%)Rejected-Finance | L5 | Rejected-Finance Other than lowest bidder |
Tender Value
₹15 L
EMD Value
₹30,000
Closing Date
29 Apr 2025, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Garrison Engineer Kargil
Office of GE Kargil, PIN - 908121, C/o 56 APO
TOKEN NO. GE/K-98/2024-25 - REPAIR TO INTERLOCKING TILES, CHEQUERED TILES, PCC PLATFORMS AND MISC B/R WOKRS IN VARIOUS UNITS AT KARGIL UNDER GE KARGIL ZONE B
2025_MES_703121_1
TOKEN NO. GE/K-98/2024-25
Open Tender
Civil Works
Item Rate
180 days
Kargil
Please refer Tender documents.
8 documents required · 8 mandatory
₹500
GE Kargil
₹30,000
Office of GE Kargil
13 Jun 2025
29 Mar 2025
1 May 2025
29 Mar 2025
29 Apr 2025
15 Apr 2025
7 Apr 2025
Amount
Demolition of PCC (un-reinforced) in ground floors & pavings n.exc 15 CM thickness below or above ground level, complete all as specified and directed by Engr-in-Charge.
M&L for 75mm thick, plain cement concrete, type D-2 1:4:8 (using 40mm graded stone aggregate) as in sub base flooring, surface finished even and rough to receive floor topping, complete all as specified and directed by Engr-in-Charge.
M&L for chequered cement concrete tiles 30x30x25mm thick with grey cement and pigment and set jointed and pointed in neat cement slurry as in floor over 15 mm thick sreed bed or bedding layer in CM 1:6 complete all as specified and directed
Dismantling of Stone sett paving of any description or thickness in floors, aprons etc. laid dry or laid dry and pointed complete all as specified and directed.
M&L for machine pressed precast concrete interlocking paver block any shape and size conforming to IS 15658-2006 of 60 mm thickness, M-35 Grade with grey cement and pigment over 25mm thick sand cushion complete all as specified and directed. (Note- Sand cushion measured and paid seperately).
M&L for Sand filling under floors or in foundation including watering and consolidation all as specified and as directed.
Demolition of Brickwork or stone/boulders masonry built in cement mortar complete all as specified and as directed by the Engr-in-Charge.
M&L for precast cement concrete type B1 1:3:6 (using 20mm graded aggregate) block masonary with solid block, exc 10cm width and setting in cement mortar 1:6 complete all as specified and as directed by Engr-in-Charge
Excavating in post holes (or similar holes) each n exc 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm complete all as specified and directed.
Dismantling posts or struts embedded in concrete, brickwork, masonaryy etc (wood, steel or RCC) any section, including taking out embedded portion and making good disturbed ground, complete all as specified and directed by Engr-in-Charge
M&L for Hand rails, half round or other steel section or core for wooden hand-rail straight portion,drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts;posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed.
Supply & fixing galvanised 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails strain- ing bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured) complete all as specified and directed
M&L for Rendering 10mm thick on fair faces of brick work or concrete surfaces in CM 1:4 complete all as specified and directed
M&L for applying two coats of synthetic enamel paint over one coat of red oxide primer on steel surfaces incl preparation of new steel surfaces of any description, over 10cm in width or girth complete all as specified and directed
Supply, fixing and laying of Punched Tape Concertina Coils Dia of Coil 610 mm Approx. 2 Feet 51spirals Expansion per 6 Mtrs Per Coil Having Core wire High Tensile Spring Steel wire 2.6mm Dia as per IS 4454 pt I Grade II Zinc Coating on wire 230 Gms/m2 Min Strip for Blade .05mm +- .005mm complete all as specified and directed.
M&L PCC (1:3:6) type C-1 using 20mm graded crushed stone aggregate as in foundations, mass filling , sub base and the like all as specified.
Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified and directed.
Note : Deduction for amount of Rs. 45,710.00 as listed in Schedule 'A' Part-II (Schedule of Credit) shall be made while awarding of contract.
M/S MOHD HASSAN (BID ID -3285978)
JP AND CO. (BID ID -3285717)
M/s Pall Constructions (BID ID -3286125)
M/S MOHD HUSSAIN (BID ID -3289574)
M/S TRADE LINK (BID ID -3282654)
M/S Haji Hadi (BID ID -3285789)
M/S LIAQAT ALI KHAN (BID ID -3289472)
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .