Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹92,019Accepted-AOC | ₹92,019 Quoted ₹92,019.14 | L1 | Accepted-AOC L1 |
| 2 | L2₹99,506.04+₹7,486.90 (8.14%)Rejected-Finance | ₹99,506.04+₹7,486.90 (8.14%) | L2 | Rejected-Finance L2 |
| 3 | L3₹1.1 L+₹16,180.15 (17.6%)Rejected-Finance | ₹1.1 L+₹16,180.15 (17.6%) | L3 | Rejected-Finance L3 |
| 4 | Rejected-Technical SANDESHKHALI | JALPAIGURI | WEST BENGAL | 734001 | - | - | Rejected-Technical Credential mismatched |
Tender Value
₹1.2 L
EMD Value
₹2,487
Closing Date
22 May 2026, 12:00 pmClosed
EE Kakdwip Irrigation Division
Office of the Executive Engineer Kakdwip Irrigation Division Postal address Kakdwip South 24 Parganas
M/R to 1 no. damaged sluice (Sumatinagar Satsata Bigha Sluice) at mouza-Sumatinagar on right bank of river Muriganga under Sagar Irrigation sub- Division of Kakdwip Irrigation Division.
2026_IWD_1024337_8
WBIW/EE/KIDIVISION/e-NIT- 01(e)/2026-27
Open Tender
CIVIL WORKS
Percentage
21 days
SAGAR
Please refer Tender documents.
6 documents required · 6 mandatory
₹2,487
Yes
14 Aug 2026
15 May 2026
23 May 2026
15 May 2026
22 May 2026
15 May 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Lifting flap shutter on channel for feeding including tying with suitable galvanized wire to iron bracket to guard against falling down, as per direction of the Engineer-in-charge.
a) with galvanized wire rope | - | Each | 767.52 | - |
| 2 | Fabrication , Supply, erection and commissioning of new Slide type vertical lift regulator service gates of Distributtories / Branch Canal / Minor Canal / Channel as per IS : 5620 - 2000 / Latest Revision consisting of skin plate, vertical and horizontal girder, stiffener etc. made of MS material consisting of angle, channel, beam, plate, flat etc. conforming to IS : 2062 - 2011 / Latest revision manufactured as per approved drawing and direction of Engineer - in - charge. The cost includes cost of Materials, Machinaries, manpower, cutting Aligning, drilling, Welding, Finishing, Consumables, Carriage and overheads with all leads and lifts complete as per specification (without painting). | 1 | Kg. | 185.92 | ₹185.73 |
| 3 | Supplying fitting and fixing at site Cast iron flap shutter for hume pipe sluice with cast iron coller and other fittings etc. complete ( As per drawing and direction of Engineer - in - Charge) including casting the same.
necessary drilling etc with carriage to site complete. The cost includes cost of Materials, Machineries, Manpower, Cutting, Aligning, drilling, Welding, Finishing, Consumbles, carriage and all overheads with all leads and lifts complete as per specification (Without painting) | 0.8 | Kg. | 203.08 | ₹162.26 |
| 4 | Lowering flap shutter from channel after feeding operation, as per direction of the Engineer-in-charge. | - | Each | 218.1 | - |
| 5 | Supplying fitting and fixing screw rod having square thread of 1.5 / 2 T.P.I. Material bright steel [EN 8 / EN 9 / Forgrd CL 4 45 C8 as per IS 1875 1992 (Latest revision) dia and thread length as required and providing with a drilled hole of required dia on the other end after flattened and supplying with one no. bolt and nut of required size and all other components as required as per direction of Engineer - in - Charge The cost includes cost of Materials, Machineries, Manpower, Cutting, Aligning, drilling, Welding, Finishing, Consumbles like cutting tools, emari paper, cloths, hire charges of machineries tools and tackles, greeze, mobil etc. including carriage, loading, unloading as per direction of Engineer in Charge.
a) Upto length 3 metre. | - | Kg. | 215.96 | - |
| 6 | Supplying fitting and fixingof CI wheel in the screw hoisting system of lifting and lowering the draw shutter. The wheel consisting of suitable size ms hub to accomodate any size of G.M/C.I nut. The rim dia 32 mm and four nos arm of wheel are made of minor dia 30 mm. & major dia 36mm. dia rod complete as per approved drawing & direction of the Engineer-in-charge. The cost includes cost of materials, man power employed for dismantling and fitting fixing consumbles like cutting tools, welding rod hire charges of machineries like bending machine, lathe machinegrinding machine, welding set tools & tackles etc. including carriage loading and unloading (a) Upto 60 cm. dia. Cast Iron wheel. | - | Kg. | 205.94 | - |
| 7 | Supplying, fifling & fixing Gun Metal Nut as per requirement having 1.5/2 T.P.I square thread for screw gearing arrangement, perfectly metting with the screw rod/gear rod for lifting the draw shutter as per direction of E.I.C. The cost includes cost of materials, man power employed, consumables like cutting tools, emery paper, cloths, , hire charges of machineries, tools & tackles etc including carriage loading & unloading. | - | Kg. | 2,019.38 | - |
| 8 | Supplying fitting and fixing M/S fabricated pedestal stool of suitable size consisting of bottom plate, top plate, four nos. legs etc.fabricated with suitable sizes m.s. plate, m.s. angle conforming to IS 2062 of latest revision as per approved drawing and direction of Engineer in charge. The cost includes cost of materials, man power employed dismantling and fitting fixing civil works consumbles like cutting tools, gas, oxygen, welding rod anchor bolt of required size hire charges of machineries like gas cutting set, welding set, tools and tackles etc. including carriage loading and unloading | 1 | Kg. | 198.79 | ₹198.59 |
| 9 | Cost for supplying and fifling fixing of Flat rubber seal (Make : Universal Moulders & Engineer/Popular Rubber Works (Pvt) Ltd/ S B Industries/Unique Polymer Works/equivelant approved make conforming to lS : 11855 -2011/Latest Revision) for different types of gate shutter as per direction of E.I.C. The cost includes cost of man power employed for fitting fixing, cost of rubber seal, hire charges of tools & tackles, scaffolding and safety equipments etc including carriage loading & unloading but excluding supply of ms clamp/ flat plate, bolts, nuts and washer.
a) 65mm x 6 mm. | - | RM | 1,219.93 | - |
| 10 | Sypplying of M.S bolt with nut for clamping Rubber seal as per direction of EIC | 1 | Kg. | 143.02 | ₹142.88 |
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 1.40 MB
Tendernotice_2.pdf
PDF • 1.03 MB
BOQ_2517420.xls
BOQ • 0.37 MB
Corrigendum.pdf
PDF • 0.42 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .