WBPWD/CEC/eNIQ/05/Q/2021-22

Amount

Sub Head 1 : Ductable & Concealed Split Air Conditioner Unit Supply & Delivery of Ceiling Suspended Ductable type Split Airconditioners having Microprocessor Based Control System and the following specification Capacity - 8.5 Tonnage (upto +1 TR acceptable) Rated Cooling Capacity - 102000 BTU/Hr. No of IDU - 1 No Air-flow / IDU - 3400 CFM No of ODU - 1 Nos. Compressor - 1 No Scroll Compressor Refrigerent - R 410A Condenser & Cooling Coil : Copper coil

Power Supply : 415V, 50 Hz, 3 Ph AC (with applicable tolarance) Make - Carrier/ Voltas/ Blue Star/ Mitsubishi Electric / Hitachi/ Trane/ YORK / DIAKIN

Supply & Delivery of Ceiling Suspended Ductable type Split Airconditioners having Microprocessor Based Control System and the following specification Capacity - 5.5 Tonnage (upto +1 TR acceptable) Rated Cooling Capacity - 66000 BTU/Hr. No of IDU - 1 No Air-flow / IDU - 2200 CFM No of ODU - 1 Compressor - 1 No Scroll Compressor Refrigerent - R 410A Condenser & Cooling Coil : Copper coil

Power Supply : 415V, 50 Hz, 3 Ph AC (with applicable tolarance) Make - Carrier/ Voltas/ Blue Star/ Mitsubishi Electric / Hitachi/ Trane/ YORK / DIAKIN

Supply & Delivery of Ceiling Suspended Ductable type Split Airconditioners having Microprocessor Based Control System and the following specification Capacity - 4 Tonnage (upto +.5 TR acceptable) Rated Cooling Capacity - 48000 BTU/Hr. No of IDU - 1 No Air-flow / IDU - 1600 CFM No of ODU - 1 Compressor - 1 No Scroll Compressor/Rotary compressor Refrigerent - R 410A/Eco Frendly Refrigerant Condenser & Cooling Coil : Copper coil Power Supply : 240V/415V, 50 Hz, 3 Ph AC (with applicable tolarance) Make - Carrier/ Voltas/ Blue Star/ Mitsubishi Electric / Hitachi/ Trane/ YORK / DIAKIN

Supply & Delivery of Ceiling Suspended Ductable type Split Airconditioners having Microprocessor Based Control System and the following specification Capacity - 3 Tonnage (upto +.5 TR acceptable) Rated Cooling Capacity - 36000 BTU/Hr. No of IDU - 1 No Air-flow / IDU - 1200 CFM No of ODU - 1 Compressor - 1 No Scroll Compressor/Rotary compressor Refrigerent - R 410A/Eco Frendly Refrigerant Condenser & Cooling Coil : Copper coil Power Supply : 240V/415V, 50 Hz, 3 Ph AC (with applicable tolarance) Make - Carrier/ Voltas/ Blue Star/ Mitsubishi Electric / Hitachi/ Trane/ YORK / DIAKIN

Supply & delivery 3.0TR capacity multi Split type Air Conditioner of rated cooling capacity of 36000 BTU/hr. with 2Nos. rotary compressor & R410A/Eco friendly refrigerant, 2nos. IDU in metal casing of rated power supply-230V-1ph-50Hz. , 1no. ODU of rated power supply-230V-1ph-50Hz. Air-flow/per IDU:- 650CFM. with corded / cordless remote handset as per choice of EIC. Make - Carrier/ Voltas/ Blue Star/ Mitsubishi Electric / Hitachi/ Trane/ YORK / DIAKIN

Supply & Delivery of Hi-wall Split Air Conditioner having following specification. Cooling Capacity--5.2 kW(Minimum) ISEER - As per 3 Star of BEE/BIS IS compliance - IS 1391 Refrigerant - R410A Compressor - Rotary/Scroll Evaporator & Condensor Coil : Copper Operating Outdoor Temparature = 50ºC and above

Power Supply - 230V,50Hz ( +Tolerrance as per applicable standard) The scope of work is also includes supply of following (i) Necessary refrigeration copper line with nitrial rubber insulation - 3 mtr (ii) necessary copper cable (FRLS type - make : Finolex/RR Kable/Polycab/Havells/Gloster) - 3mtr [Make: Mitsubishi Electric / General / SHARP]

Supply & Delivery of Hi-wall Split Air Conditioner having following specification. Cooling Capacity--6.6 kW (Minimum) ISEER - As per 3 Star of BEE/BIS IS compliance - IS 1391 Refrigerant - R410A Compressor - Rotary/Scroll Evaporator & Condensor Coil : Copper Operating Outdoor Temparature = 50ºC and above

Power Supply - 230V,50Hz ( +Tolerrance as per applicable standard) The scope of work is also includes supply of following (i) Necessary refrigeration copper line with nitrial rubber insulation - 3 mtr (ii) necessary copper cable (FRLS type - make : Finolex/RR Kable/Polycab/Havells/Gloster) - 3mtr [Make: Mitsubishi Electric / General / SHARP]

Installation Testing and Commissioning of Ductable Split AirConditioners by making scaffolding arrangement as per site condition, Supply of necessary Refrigerant, connecting Control & power cabling & other necessary materials to complete the job.

8.5 TR Ceiling Suspended Ductable type Split AC

5.5 TR Ceiling Suspended Ductable type Split AC

4 TR Ceiling Suspended Ductable type Split AC

3 TR Ceiling Suspended Ductable type Split AC

Installation, Testing & Commissioning of Indoor & Outdoor unit of above Hi wall split AC machine after making hole in wall etc as per direction of EIC including Supply of required Refrigerant, S&F of necessary fixing arrangement for indoor and 40 x 40 x 5 mm MS angle iron frame for outdoor unit (or arrangement recomended by Manufacturer), duly painted, laying and making connection of refrigeration pipe, power cable, drain pipe etc as per direction of the EIC.

Sub Head 2 : Refrigerent Piping Supply, Installation, testing and commissioning including vaccumiazation and Nitrogen testing of following nominal sizes of soft/hard drawn copper refrigerant piping for Package/VRV/VRF/RAC system, complete with fittings, with suitable adjustable ring type hanger supports, jointing/brazing including accessories, insulated with XPLE Class-O tubular insulation/with Class-O closed cell elastometric nitrile rubber tubular sleeves sections of specified thickness as given below for Suction and Liquid lines, all accessories as per specifications etc. as required :

6.4 mm dia (OD) (Soft drawn) with tube thickness 1.2 mm with 19 mm thick insulation

9.5 mm dia (OD) (Soft drawn) with tube thickness 1.2 mm with 19 mm thick insulation

12.7 mm dia (OD) (Soft drawn) with tube thickness 1.2 mm with 19 mm thick insulation

15.86 mm dia (OD) (Soft drawn) with tube thickness 1.2 mm with 19 mm thick insulation

22.2 mm dia (OD) (Hard drawn) with tube thickness 1.2 mm with 19 mm thick insulation

28.58 mm dia (OD) (Hard drawn) with tube thickness 1.2 mm with 19 mm thick insulation

Supply & Installation of 6mm Nitrile Rubber insulated PVC / HDPE pipes of following sizes with fitting, accessories, bends, elbows, tees, flanges, U-trap, wall sleeves, hangers, supports, anchors etc for draining condensate water from indoor unit to the nearest drain point. 25 mm Dia

32 mmDia

Sub-Head 3 - Ducting Supply, installation, balancing and commissioning of fabricated at site GSS sheet metal ( Make-Tata Steel/Sail/Jindal ) rectangular/ round ducting complete with neoprene rubber gaskets,elbows,splitter dampers, vanes, hangers, supports etc as per approved drawings and specifications of following sheet complete as required Thickness 0.63 mm sheet

Thickness 0.80 mm sheet

Duct tharmal insulation by supplying and fixing of 19mm thickness duly laminated aluminum foil of mat finish closed cell Nitrile rubber (Class “O”) insulation on existing duct after applying suitable adhesive for Nitrile rubber. The joints shall be sealed with 50 mm wide and 3 mm thick self adhesive nitrile rubber tape insulation complete as per specifications and as required.

Supply and fixing of acoustic lining of supply air duct and plenumn with 25 mm thick resin bonded glass wool having density of 32 kg/m³, with 25 mm X 25 mm GI section of 1.25 mm thick, at 600 mm centre to centre covered with Reinforced Plastic tissue paper and 0.5 mm thick perforated aluminum sheet fixed to inside surface of ducts with cadmium plated nuts, bolts, stick pins, CPRX compound etc. complete as required and as per specifications.

Supplying & fixing of powder coated extruded aluminium Supply Air Grills with aluminium volume control dampers as per specifications.

Supplying & fixing of powder coated extruded aluminium Return Air Grills with louvers but without volume control dampers complete as required

Supply, installation, testing and commissioning of GI Non-return damper complete with neoprene rubber gaskets, nuts, bolts, screws linkages, flanges etc, as per specifications for stand by units

Supply, installation, testing and commissioning of Flexible Canvas Connection as per direction of the EIC.

Supplying, fixing, testing & commissioning of fresh air provision as per direction of the EIC incl. filter, motorised damper, bird screen etc complete as required.

SITC of 6A Limit switch for control the Fresh air Motorized Damper(Fresh air damper Will be Closed when open the Door.Fresh Air Damper will be Open when Close the Door) including necessary wiring by 1.5 sqmm FRLS wire in 20 mm rigid conduit with necessary fittings.

S&F 230 V UV Lamp with mounting arrangement & necessary wiring as required.

Sub-Head 4-- Misceleneous Items Supply, fabrication & fixing 3 Nos. M.S. u-channel of 6mm thick of size (75 mm x 40 mm x 40mm) of 1 mtr length for making platform for installation of outdoor unit of ductable packaged split AC incl. drilling 2 Nos. holes in each channel including cutting holes the wall & grouting the same with Cement concrete (1:11/2 :3) etc. fabricated with horizontal angle of 50mm x 50mm X 6mm 6mm of 2 Mtr length including supporting angle 50mm x 50mm x 6mm in each platform in outer edge for transmitting the load centrally through 2Nos.(50mm x 50mm x6mm) Angle inserted into the exiting wall. The platform should be baricated with verticle angle of 25mm x 25mm x 6mm of 1 mtr. length, abricated on the surface of each Horizontal channel & Angles & interconneed by 25mm x 25mm x 5mm MS patti. Area of platform is 3Mtr. x 1 Mtr.

Supply, laying and termination of 1.1 kv grade following size PVC insulated PVC sheathed unarmoured Copper Cable (make:-Finolex/RR Kable/Polycab/Havells/Gloster)

3C X 2.5 SqMM

3C X 4 SqMM

4C X 1.5 SqMM

4C X 2.5 SqMM

Supply & fixing of plenum chamber outer boxing made of water proof wooden ply board (12mm thick) & wooden supports, acoustic insulation with fibre glass board (50mm) thickness.

Supply & Charging Refrigerant

Terms and condition

The Agency must procure the materials from the Manufacturer / OEM or from their authorised sales channel so that the standard warranty / support of the Manufacturer / OEM becomes applicable to the products to be delivered and installed by them.

Documents that authenticates such procurement from the Manufacturer / OEM or from their authorized sales channel and standard warranty / support should be sent from the e-mail of the Manufacturer / OEM / authorized sales channel to the e-mail of Engineer-in-Charge and hard copy of it to be submitted during execution, of work/submission of bill. If any refurbished material is supplied and installed, penal action will be taken as per existing rules

ELECTRIC REFRIGERATION

SKY DECORATIONS PRIVATE LIMITED

Lyric International