Tender ID

Karnataka

Cancelled

Works

Buildings

Construction of Ambedkar Community hall in Chennapeth Ambedkarnagar of ward no.56 in Hubballi Taluk Dharwad District.

Karnataka Neeravari Nigam Limited

KNNL Division MRBC Div No 3 Byahatti | Karnataka

Amount: ₹42.2 LCloses: 4 Nov 2024Closed

Tenderkart AI

Reads all tender documents

Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.

Timeline

Published10 Oct 2024
Cancelled10 Oct 2024

Cancellation Details

Cancelled

CancelledCancelledReason: Cancelled

Published 10 Oct 2024

Tender Value

₹42.2 L

EMD Value

₹85,000

Closing Date

4 Nov 2024, 9:30 pmClosed

Tender Inviting Authority

Office Inviting Bids

Karnataka Neeravari Nigam Limited

Contact Person

manohar S Bisnal

Office Number

Work Description

Construction of Ambedkar Community hall in Chennapeth Ambedkarnagar of ward no.56 in Hubballi Taluk Dharwad District.

Tender Information

Tender ID

KNNL/2024-25/BD/WORK_INDENT1581

Reference Number

KNNL/2024-25/BD/WORK_INDENT1581

Tender Type

Open

Product Category

Buildings

Form of Contract

Electronic Documents, First(One Cover)

Location

KNNL Division MRBC Div No 3 Byahatti

Source Website

Subscribe to view

Documents Required

9 documents required · 9 mandatory

Technical Bid

RequiredAnnual Turnover Certificate 2019-20 to 2023-24 a.Achieved in at least Two Financial years an average Financial Turnover of Rs.50.00 lakhs.All document certificates issued by a Charted Accountant should have a UDIN Unique Document Identification Number generated through the ICAI The Institude of chartered Accountants of India Portal. Certificate without UDIN the documents uploaded will be considered and treated as invalid document.

RequiredLiquid assets and or availability of credit facilities of not less than Rs.15.00 lakhs. Credit lines or letter of credit or Certificates from Banks for meeting the fund requirement etc

Requiredwork done certificate a.Satisfactorily completedat least 90percent of contract value as a prime contractor, at least one similar work Such as Construction of community hall Buliding Work of value not less than 50 percent of the amount put to tender i.e. Rs 25.00 Lakhs The work done should be obtained from a competent authority not below the rank of Executive Engineer of the concerned division

RequiredThe requisite Earnest money deposit e cash The earnest money Deposit remain as e cash till the completion of work including maintenance period.Small Scale Industries Certificate

RequiredKPWD Registered Class-III and above contractor

RequiredValid Employees provident fund EPF registration certificate with latest paid challan

RequiredCopy of Income tax return filed for the financial year 2023-24 mentioning the pan.

RequiredGST Registration certificate

RequiredAssessed available tender capacity equal to AxNx2.5-B

Eligibility Criteria

General Conditions of Tender 1) The tenderer should submit the following documents along with the tender a) A copy of the KPWD Registered Class-III and above contractor b)Valid Employees provident fund (EPF) registration certificate with latest paid challan.c) Copy of Income tax return filed for the financial year 2023-24 mentioning the pan.d)GST Registration certificate e) Liquid assets and /or availability of credit facilities of not less than Rs.15.00 lakhs. (Credit lines or letter of credit or Certificates from Banks for meeting the fund requirement etc.f) The requisite Earnest money deposit (e-cash) The earnest money Deposit remain as e cash till the completion of work including maintenance period

The intending bidders are advised to visit the site of work before submission of the tenders.

Within 20 days of receipt of the Letter of Acceptance, the successful Tenderer shall deliver to the Employer a Security deposit in any of the forms given below for an amount equivalent to 5% of the Contract price plus full difference amount for below quoted tenders as additional security (for unbalanced tenders) in accordance with Clause 25.5 of ITT and Clause 43 of the Conditions of Contract.: The additional performance security will be released proportionately to the bill amount till the contractor achieves progress of the entire cost of the work as per the agreement.

It shall be the responsibility of the Bidder to ensure credit of Tender Processing Fee and EMD into the respective receiving bank accounts of e-Procurement on or before the last date and time of bid submission.

EMD Payments through e-Payment mode shall be made as one single transaction and payments made in part are liable for rejection.

To qualify for award of this contract, each Tenderer in his name should have in the last five years is i.e. 2019-20, 2020-21, 2021-22 2022-23 & 2023-24. Achieved in at least Two Financial years an average Financial Turnover of Rs.50.00 lakhs.All document/certificates issued by a Charted Accountant should have a UDIN (Unique Document Identification Number) generated through the ICAI (The Institude of chartered Accountants of India) Portal. Certificate without UDIN the documents uploaded will be considered and treated as invalid document.

Satisfactorily completed (at least 90% of contract value) as a prime contractor, at least one similar work Such as Construction of community hall / Buliding Work of value not less than 50% of the amount put to tender i.e. Rs 25.00 Lakhs The work done should be obtained from a competent authority not below the rank of Executive Engineer of the concerned division

Assessed available tender capacity equal to (AxNx2.5- B) where A Maximum value of civil engineering works executed in any one year during the last five years (2019-20 to 2023-24) (Updated to 2024-25 price level) taking into account the completed as well as works in progress.N equal to Number of years prescribed for completion of the works for which Tenders are invited.B equal Value, at 2024-25 price level, of existing commitments and on-going works to be completed during the next 06 months (period of completion of the works for which Tenders are invited)

If any of the dates mentioned above happen to be a general holiday, the next working day holds good.

The contractor should take still photos / videos of the work before commencement of works, during execution and after completion compulsorily. These photos/ videos should be made available to the implementing officer, for immediate reference during review of works to enclose it with completion certificate

The bidder at the time of execution of the agreement should give a detailed execution plan and fortnightly program to complete the work in full manner in 6 months without fail. The program can be modified with mutual consent.

Conditional tenders are liable to be rejected. The officer competent to accept the tender shall have the right to reject any or all the tenders without assigning any reason whatsoever.

Corrigendum will be published in web site for all modifications/corrections if any

The intending bidders should note that, if any of lands either in part/parts or whole required for the work is not acquired by the Nigam, it shall be the responsibility of the bidder to take possession of such land and start the work by the consent of the land owners before commencement of work at no extra cost to the Nigam and no claim whatsoever relating to non availability of land would be entertained.

Incomplete tender documents will be rejected.

All materials like steel, cement etc., required for the above work should be procured by the contractor only at his own cost. And these materials will have to be got tested by the competent authority before put to use

The application made by the firm/company, shall be signed by a person holding the power of attorney, in which case a copy of power of attorney shall be submitted.

The necessary certificates documents in support of eligibility criteria fulfilled as stipulated shall be scanned and attached to e-tender document. The Original certificates/documents shall be produced on or before stipulated date and time for verification. Scanned signature of the bidder/authorized representative of the bidder shall be attached while uploading bid document.

Maintenance period or the defect liability period for this work is 12 months from the date of completion of work.

As per the Karnataka building and other construction workers welfare cess act 1996, 1% of the bill amount will be deducted from the bills.

Tenders will be opened on the due date in presence of the contractor or their Authorized representatives

Debarment of tenderers: The procurement entity may debar tenderer for a period not exceeding 3 years from participation in its tenders following such procedures as may be prescribed on the ground that tenderer is engaged in corrupt or fraudulent practices in competing or executing the contract including misleading the procuring entity or any stage of procurement activity with a fraudulent intention. ( KTPP Act 26A).

As per GO FD 5 EXP -12 / 2023 dated 15.05.2023 , the contractor shall be abide to provide e Bank Guarantee towards Security Deposits

The payment of bills of this work will be made as and when the letter of credit is received under the same head of account from KNNL/Government of Karnataka.

The contractors should adhere to the accepted action plan submitted by him under any circumstances without linking to the pending bill payment of the work

Typo-graphical errors if any will not be the ground for any claims by the Contractor.

Tendering by the joint venture will not be allowed.

The contractor should furnish the name of the individual /firm with address and Telephone numbers with place of registration, year of incorporation etc.

The tender processing charges paid by the bidders are not refundable even if the tenders are cancelled

Royalty on construction materials and other taxes will be deducted as per prevailing Government orders.

The Contractor shall produce the Mineral Dispatch Receipt (MDR) from Department of Mines & Geology for exemption.

The tenderer has to make his own arrangement for procurement of all materials required for the work. There is no departmental supply of materials. Contractor should procure only ISI mark materials and submit necessary quality control certificates from the authorized quality control authority, before execution.

Sub leasing of work in any form is prohibited

No quarries are approved by KNNL for materials. The quarries considered are for the estimate purpose only. The intending bidders shall visit the site, identify the quarries, ascertain availability for the quantity and quality of the materials required for the work and shall quote his rates accordingly. No extra claim whatsoever will be entertained in this regard

The rates includes all leads and lifts and work shall be carried out as per the instruction of Engineer-in-charge .All specifications are as per relevant IS codes in vogue and Indian Road Congress. The rates for the specification in the Schedule B includes all lead and lifts irrespective of the distance and height, no extra claim will be entertained for additional lead and lifts.9

The validity period of EMD shall be for a minimum period of 225 days from the date of opening of the tenders.

The EMD of the unsuccessful bidder will be refunded only after the acceptance of the tender by the competent authority as per tender clause

The tender inviting authority has got right either accepting tender or rejecting the tender without assigning any reasons.

The Contractor shall be abide to pay any revision of GST during the tender period.

In case of death of contractor after executing the agreement commencement of the work , his legal heir if any eligible registered contractor and willing can execute and complete the work at the accepted tender rates irrespective of the cost of the work

EMD amount and Amount put to tender will be as mentioned in the e-portal of respective work

Fee & Financial Details

Tender Fee Amount

₹1,060

EMD Fee Amount

₹85,000

Important Dates

Last Activity

10 Oct 2024

Published

10 Oct 2024

Download Ends

30 Oct 2024

BOQ Preview

•

Construction of Ambedkar Community hall in Chennapeth Ambedkarnagar of ward no.56 in Hubballi Taluk Dharwad District.

•

Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...

•

Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS...

•

Providing and laying in position Reinforced cement concrete for all Superstructures of building , Road works, Water works, Irrigation works & superstructure works of bridges upto 3.50 m height. The gr...

•

formwork 8% for footing I.No.3 (complete as per direction of Engineer incharge)

•

Form work for columns Ground Floor 70% as per I.No.5 (complete as per direction of Engineer incharge)

•

Form work for columns First Floor 70% as per I.No.7 (complete as per direction of Engineer incharge)

•

form work for for beam,lintel 60% As per I.no.9 (complete as per direction of Engineer incharge)

•

form work for Roof slab 50% as per I.No.5

•

Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level in all shapes and sizes in Cement mortar 1:6 (1 cement : 6 coarse sand) inc...

•

Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The ...

•

Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The ...

•

Formwork for chajja,canopy,staircase For Ground Floor 45% I.No.14 (complete as per direction of Engineer incharge)

•

Formwork for chajja,canopy,staircase For First Flore 45% I.No.15 (complete as per direction of Engineer incharge)

•

Supplying,fitting and placing TMT Fe 550 & above Reinforcement in foundation/substructure/superstructure complete as per Drawing and Technical specifications

•

(complete as per direction of Engineer in...

•

Providing Mathi/Nandi wood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete a...

•

Providing and fixing in position fully panelled Honne wood shutters for doors with stiles and rails of 40mm. thick with bottom and lock rails 180mm wide top rail and stiles 100mm wide as per drawing a...

•

Fixing of door frame in an existing opening including embedding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1:3:6 of 20mm and down size grani...

•

Providing & fixing of 2.5 track x 2-panel sliding windows made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elasto...

•

Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with pproved steel primer all complete. Fixed to steel ...

•

Providing 12 mm cement plaster with cement mortar 1:4 (1 cement:4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, inc...

•

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per sp...

•

Providing 18 mm cement plaster in two coats under layer 12 mm thickcement plaster with cement mortar 1:5 (1 cement : 5 coarse sand)finished with a top layer 6 mm thick cement plaster with cement morta...

•

Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade :New work (two coats) over and including water thinnable priming coat with cement primer after th...

•

Finishing walls with water proofing cement paint of required shade :New work (Two coats applied @ 4.84 kg/10 m²) to give an even shade after thoroughly brooming the surface to remove all dirt, dust, ...

•

Applying priming coat: With ready mixed pink or Grey primer of approved rand and manufacture on wood work (hard and soft wood) including reparing the surface after thorougly cleaning oil, grease, di...

•

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :Two coats on new work over an under coat of suitable shade with ordinary paint of appro...

•

Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two coat applied @ 0.90 ltr/10 m² over an under coat of primer applied @ 0.80 ltr/10 m² of approved brand and manufacture i...

•

Providing and laying flooring and steps fine machine polished granite stone slabs 20 mm thick on cement mortar bed 1:6, 20 mm thick, and joints finished with cement mortar 1:3 over existing cement con...

•

Providing and fixing in position 12mm thick plaster of paris (Gypsum anhydrous) for ceiling reinforced with hessian cloth flat surface with ceiling tiles up to a height of 5 m above floor level over a...

•

Supplying PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joint...

•

Hold fasts (complete as per direction of Engineer incharge)

•

Providing and fixing ISI marked M.S. pressed butt hinges bright finished with necessary screws etc. 125x65x2.12mm (complete as per direction of Engineer incharge)

•

Providing and fixing chromium plated brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete. (complete as per direction o...

•

Providing and Applying single component Polyurethane based cold applied seamless waterproofing coating to the RCC surface like Roof & Podium area applied at 2.4kg per m2 in 3 coats to achieve 1.5mm D...

•

Concealed Conduit System: Supplying heavy gauge PVC conduit pipe ...... mm dia..........mm thick confirming to IS 2509 with suitable size bends, metal/PVC Junction boxes, adhesive paste etc., and runn...

•

Open Conduit System:Supplying heavy gauge PVC conduit pipe ....... dia ....... mm thick confirming to IS 2509 with suitable size bends, junction boxes, adhesive paste etc , and fixing using inverted w...

•

Supplying and fixing PVC/metal conduit Deep junction box (complete as per direction of Engineer incharge) a) 19/20mm deep junction box

•

Supplying and fixing PVC/metal conduit Deep junction box (complete as per direction of Engineer incharge) b) 25mm deep junction box

•

Supplying and fixing PVC/metal conduit Deep junction box (complete as per direction of Engineer incharge) c) 32mm deep junction box

•

Supplying and flush mounting teak wooden box without front plank, made of not less than 12 mm thick wood, after due groove cutting, finishing with necessary cement plastering complete.. (complete as p...

•

Extra for Groove cutting in brick wall/CC floor to the suitabledepth for concealing of Conduit/GI pipe and plastering,finishing upto wall surface complete.(complete as per direction of Engineer inchar...

•

Pointing wiring using copper wire with switch:Supplying and wiring adopting loop system in existing PVC Conduit /casing capping using 2x1.5mm2 (Phase & Neutral) & 1x1.0 mm2 (Earth wire) FRLS multi str...

•

Supplying 6A flush type socket and 6 A flush type SP switcheither surface/flush mounting in existing gang box or in 4mm thick plastic sheet and fixing over a flush mounted wooden box and wiring using ...

•

Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 32A DP Switch (complete as per direction of Engineer incharge)

•

Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 3.6.9 6/16A Universal Socket

•

Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. I.No.3.6.4 Stepped Fan Regulator Two Module (complete as per direction of En...

•

Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS...

•

Supplying 4mm thcik plastic sheet with necessary nitches of fixing switches regulators etc and fixing on existing wooden or metal box using N.F.screws (complete as per direction of Engineer incharge)

•

Supplying PVC/GI flexible conduit pipe .... mm dia fixing on surface over inverted tapered wooden plugs or phill plugs or rawl plugs and clamped using heavy gauge saddles at an interval of 300 mm usin...

•

Supplying and fixing of slim box fitting, made out of CRCA Sheet metal body with locking type holder completely wired. Excluding Ballast & Fluorescent Tube.I.no.11.14.1 1 x 2' Tube light fitting. (c...

•

Fixing of ..... A TPST / change over switch / Contactor along with neutral link with screws, bolts, nuts and wiring using required capacity wires and circuit labelling.15A to 63A TPST a)15A to63A TP...

•

supplying of TPST with rewirable porelain channels in SM enclosure. Made out of 14 SWG powder coated paint of approaved colour 32A (a) 32Amps (complete as per direction of Engineer incharge)

•

Supplying and fixing of Porecelain fuse channel with cut out on existing wooden/panel using necessary nuts,bolts and washers 32 A (a) 32 Amps (complete as per direction of Engineer incharge)

•

Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capa...

•

Supplying and fixing of LED type panel board indicating lamp with required colour suitable for 230/440VAC. 50 Hz 12/24V D.C. (complete as per direction of Engineer incharge)

•

Supplying and fixing angle iron frame work fabricated out of MS angle iron and MS flat .... with bolts,washers etc and painted with 2 coats of red oxide and then two coats of approved paint ( i)40x40x...

•

Fabricating supplying and mounting MS box made out...... SWG suitable for floor/wall mounting.fully weather proof with provision for better heat dissipation, provided with hinged front cover, equipped...

•

Supply of LED Streetlight luminaire with pressure die cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of anti glare clear diffuser with Injection moulded polyc...

•

Fixing a ceiling /wall mounting fan of all capacities and all types to existing with necessary clamps and 'S' hook made out of 15 mm dia MS rod, with 5 amps, celling rose of approved quality with nece...

•

Supplying capacitor type ceiling fan complete with down rod blade,shakle,regulator canopies etc.,for operation on 230 volts,50 cycles,single phase AC supply confirming to ISS-374-1979 and with double ...

•

Supplying and fixing 32A security and energy saving DP switch with key tag suitable to operate on 230 V, 50Hz AC supply & completely wired on existing box. (complete as per direction of Engineer incha...

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

NIT Documents

Verification of CA documents (1).pdf

Others - Verification of CA document • 0.13 MB

Royalty.pdf

Others - Royalty • 0.22 MB

e proc 56 chennapete Ambedkar bid document kw-2.docx

Others - bid document • 1.76 MB

Debarment cerculer 31.5.24(3).pdf

Others - Debarment cerculer • 0.60 MB

E- Bank Guarantee Reg_0001.pdf

Others - E-Bank Guarantee • 1.06 MB

MDP-Royalty circular for attachment all dtp and e-proc (1).pdf

Others - MDP-Royalty circular • 2.36 MB

Ready to Participate?

Download all tender documents and submit your bid

Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .

Loading…

Tender ID

Karnataka

Cancelled

Works

Buildings

Construction of Ambedkar Community hall in Chennapeth Ambedkarnagar of ward no.56 in Hubballi Taluk Dharwad District.

Karnataka Neeravari Nigam Limited

KNNL Division MRBC Div No 3 Byahatti | Karnataka

Amount: ₹42.2 LCloses: 4 Nov 2024Closed

Tenderkart AI

Reads all tender documents

Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.

Timeline

Published10 Oct 2024
Cancelled10 Oct 2024