Loading…
Loading…
Tender Value
Refer Docs
EMD Value
₹19,383
Closing Date
14 Jul 2026, 3:00 pm6d left
THE EXECUTIVE ENGINEER
O/o The Executive Engineer DWS Division Bishalgarh
Extension of Pipeline from DTW Schemes in Various GPs/VCs, Including Domestic Connections and allied Works, under Bishalgarh RD Block within the Jurisdiction of DWS Sub-Division
2026_CEDWS_74490_1
119/EE/DWS/BLG/2026-27
Open Tender
Civil Works - Water Works
90 days
Bisramganj
Please refer Tender documents.
3 documents required · 3 mandatory
₹1,000
₹19,383
7 Jul 2026
7 Jul 2026
15 Jul 2026
7 Jul 2026
14 Jul 2026
7 Jul 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1Extension of Pipeline | |||||
| 1.01 | Excavating trenches of required width for pipes, cables etc. in/c excavation for sockets and dressing of sides, where required ramming of bottom, depth up to 1500 mm ( Slope 1 in 200) in/c getting out the excavated soil and backfilling of soil as required after laying of pipe line, in layer not exceeding 200mm in depth in/c consolidating each deposited layer by ramming, watering etc. and disposing of surplus excavated soil as directed with all required lead as per Chapter-2 of CPWD specification & direction of the Engineer-in-Charge. | - | - | - | - |
| 1.02 | A).For UPVC pipes in new work
a). in all kinds of soil
i) For Pipes not exceeding 90 mm dia | - | Mtr | 87.6 | - |
| 1.03 | A).For UPVC pipes in new work
a). in all kinds of soil
i). For pipes exceeding 90 mm dia but not exceeding 300 mm dia. | - | Mtr | 106.4 | - |
| 2Providing and fixing C.I. sluice valves ( with cap ) complete with bolts, nuts, rubber insertions etc. ( the tail pieces if required will be paid separately ) as per CPWD specification and direction of the Engineer - in - charge. | |||||
| 2.01 | i.80mm dia. (PN-1.6) | - | No. | 4,319.7 | - |
| 2.02 | ii.100mm dia (PN-1.6) | - | No. | 5,066.7 | - |
| 3 | Providing, fixing and laying fabricated UPVC end cap conforming to IS : 10124 ( Part 4 ) with solvent cement conforming to IS : 14182 including testing of joints complete as per CPWD specification and direction of the Engineer - in - charge. i. 90 mm dia | - | No. | 148.7 | - |
| 4 | Providing, fixing and laying fabricated UPVC bend of required degree conforming to IS : 10124 ( part 8 / 9 / 10 / 11 / 12 / 13 ) with solvent cement conforming to IS : 14182 including testing of joints complete as per chapter 20 of CPWD specification and direction of the Engineer - in - charge. i. 90 mm dia | - | No. | 298.7 | - |
| 4.01 | ii. 110 mm dia | - | No. | 356.4 | - |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 2.52 MB
BOQ_75819.xls
BOQ • 0.28 MB
D.pdf
Tender Documents • 2.51 MB
Download all tender documents and submit your bid