REPAIR AND MAINTENANCE TO FURNITURE OF OFFICERS MARRIED ACCOMMODATION FOR THEIR WELCOME MAINTENANCE AND MAP FURNITURE FOR JCOs/OR MARRIED ACCOMMODATION UNDER GE (NORTH) BINNAGURI

Amount

Chair Verandah (Drawing No. FD/MAP-II/15) The following repairs to be carried out:-

M&L for spot welding in repairs not exc 2.50cm in length of broken steel frame complete all as specified and as shown in drawing. Note : Material to be welled not to exceed 2.00mm in thickness.

M&L for applying one coat of white synthetic enamel paint (Ist grade quality) on all exposed steel surface of chair verandah including preparation of old painted surface complete all as specified and as shown in drawing.

Taking out old existing damaged / broken seat frame of chair verandah and supply & fix new seat frame complete all as specified and as shown in drawing.

Taking out old existing damaged / broken back frame of chair verandah and supply & fix new back frame complete all as specified and as shown in drawing.

S&F new hard rubber shoes of best quality complete all as specified and as shown on drawing.

Chair Dining JCO/OR (Drawing No. FD/MAP-II/ 05) The following repairs to be carried out:-

Taking out old damaged/decayed front leg from its position and S & F new front leg as per existing shape and size in the same position made out of well seasoned ‘Teak wood" timber complete all as specified and as shown on drawing.

All as per item Ser No 2.01 above here-in-before but for rear leg complete all as specified and as shown on drawing.

Taking out old damaged/decayed seat rail (Front/ back, left/ right) from its position and S & F new seat rail in the same position as per existing shape & size made out of well seasoned ‘Teak wood’ timber complete all as specified and as shown on drawing.

Taking out old damaged/decayed leg stiffener from its position and S & F new leg stiffener as per existing shape and size in the same position made out of well seasoned ‘Teak wood’ timber complete all as specified and as shown on drawing.

Taking out and removing all unserviceable worn out PVC seat frame of Chair Dining JCOs/OR and S & F new PVC seat frame complete all as specified and as shown on drawing.

S&F new seat stiffener fixed to middle of seat rail made out of well seasoned ‘Teak wood’ timber (size 30 x 25mm) complete all as specified and as shown on drawing.

Taking out of all old unserviceable PVC shoes and S&F new hard PVC shoes with screws as approved complete all as specified and as shown on drawing.

M&L for applying French Polish one or more coat till glossy finish achieved to match with existing surface after preparation of surfaces including wood filler complete all as specified and as shown on drawing.

Chair Dining Officers with Cushion (Drawing No. FD/MAP-II/04) The following repairs to be carried out:-

Taking out old damaged/decayed front leg from its position and S & F new front leg as per existing shape and size in the same position made out of well seasoned ‘Teak wood" timber complete all as specified and as shown on drawing.

All as per item Ser No 3.01 above here-in-before but for rear leg complete all as specified and as shown on drawing.

Taking out old damaged/decayed seat rail (Front/ back, left/ right) from its position and S&F new seat rail in the same position as per existing shape & size made out of well seasoned ‘Teak wood’ timber complete all as specified and as shown on drawing.

Taking out old damaged/decayed leg stiffener from its position and S & F new leg stiffener as per existing shape and size in the same position made out of well seasoned ‘Teak wood’ timber complete all as specified and as shown in drawing.

All as per item Ser No 3.01 above here-in-before but for back rest complete all as specified and as shown on drawing.

Taking out and removing all unserviceable worn out cushion and cover of Chair Dining Officer and S&F new cushion 40 density and leatheritic cover complete all as specified and as shown on drawing.

Taking out of all old unserviceable rubber/PVC shoes and S&F new hard rubber/PVC shoes with screws as approved complete all as specified and as shown on drawing.

M&L for removing of unsv seat ply from its position and S&F new ply 12mm thick as per shape and size fixed to frame with screw complete all as specified and as shown on drawing.

M&L for applying French Polish one or more coat till glossy finish achieved to match with existing surface after necessary preparation of surfaces including wood filler complete all as specified and as shown in drawing.

Chair Writing (Drawing No. FD/E6/MAP/12) The following repairs to be carried out :-

Taking out old damaged / decayed tapestry cloth from seat /back of chair and replace it with new tapestry cloth of Thai Matty Fabric, multicolor, plain pattern complete all as specified and as shown in drawing. Note : The cost of tapestry cloth not less than Rs. 290/- per mtr.

Taking out old damaged / decayed seat / back of chair and S&F new seat/ back, shall be of 12 mm thick hot pressed plywood up hoistered with fabric and moulded polyurethane foam (shall be 50 mm thick and moulded with density 50.55 kg per cubic mtr) with pvc lapping all around and covered with Thai Matty Fabric, multicolor, plain pattern tapestry cloth complete all as specified and as shown in drawing. Note: The cost of tapestry cloth not less than Rs. 290/- per mtr.

Taking out old damaged / decayed handle from chair and Supply and fixing a pair of arms made out of black integral skin polyurethane with 75-85 shore 'A' hard ness and reinforced with MS insert along with nut & bolt where required to chair writing complete all as specified and as shown in drawing.

M&L for spot welding to damaged/broken steel frame of chair writing complete all as specified and as shown on drawing. Note:- Length of each spot welding 4cm in length and not exc. 2mm in thickness.

Taking out old unserviceable hard PVC shoes & S&F new hard PVC shoes as approved complete all as specified and as shown on drawing.

M&L for painting to steel prame of chair with synthetic enamel paint (1st grade quality) by spray machine after cleaning rust/dust and preparation of old painted surfaces including applying primer wherever required complete all as specified and as shown on drawing.

Almirah Large Steel (Drawing No. FD-67(M), FD-1031) The following repairs to be carried out:-

M&L for taking out loose leg (right/left) and re-fixing the same in existing position with necessary run welding of Almirah large, repair of top, bottom, side(left/right) etc and make it serviceable condition complete all as specified and as shown on drawing.

Taking out the old damaged bottom leg (right/left) and S&F new bottom leg made out of 1mm thick plain mild steel sheet (MS Sheet), made existing shape and fixed in the same position by run welding including applying one coat of red oxide primer complete all as specified and as shown on drawing.

M&L for of existing loose shelf of Almirah large steel and make it serviceable by providing new chips, nut & bolts of existing size as required or spot welding complete all as specified and as shown on drawing.

M&L for repair of existing loose hinges by spot welding and make it functional by providing new steel pin including greasing, remove unsv hinges from its existing position and S&F new hinges the same for smooth function complete all as specified and as shown on drawing.

M&L for removing existing unserviceable damaged lock from almirah and S&F new 6 lever steel lock as per existing shape and size with duplicate keys as approved complete all as specified and as shown on drawing.

M&L for taking out old unserviceable handle from almirah and S&F steel chromium plated handle 125mm long of existing shape and size as approved complete all as specified and as directed and shown on drawing.

Repair of existing loose door shutter (right/left) by run welding and make it serviceable condition complete all as specified and as shown on drawing.

M&L for painting to almirah steel large on both side (outer/inner surface) including legs, door shutter and shelves with synthetic enamel paint (1st grade quality) by spray machine after cleaning rust/dust and preparation of old painted surfaces including applying ready made putty wherever required for making good cavities complete all as specified and as shown on drawing.

Almirah Medium Steel (Drawing No. FD-1032) The following repairs to be carried out:-

M&L for taking out loose leg (right/left) and re-fixing the same in existing position with necessary run welding, repair of top, bottom, side(left/right) etc and make it serviceable condition complete all as specified and as shown on drawing.

Taking out the old damaged bottom leg (right/left) and S & F new bottom leg made out of 1mm thick plain mild steel sheet (MS Sheet), made existing shape and fixed in the same position by run welding including applying one coat of red oxide primer, complete all as specified and directed.

M&L for taking out loose shelf from Almirah medium steel and re-fixing the same rigidly after minor repairs by providing new chips, nut & bolts of existing size as required complete all as specified and as directed.

M&L for Repair of existing loose hinges by spot welding and make it functional by providing new steel pin including greasing, remove unserviceable hinges from its existing position and S&F new hinges the same for smooth function complete all as specified and directed.

M&L for removing existing unserviceable damaged lock from almirah and S & F new 6 lever steel lock as per existing shape and size with duplicate Keys as approved complete all as specified and as directed.

M&L for taking out old unserviceable handle from Almirah and S & F steel chromium plated handle 125mm long of existing shape and size as approved, complete all as specified and as directed and shown on drawing.

Repair of existing loose door shutter (right/left) by run welding and make it serviceable condition, complete all as specified and as directed.

M&L for painting to Almirah Steel on both side (outer/inner surface) including legs, door shutter and shelves with synthetic enamel paint (1st grade quality) by spray machine after cleaning rust/dust and preparation of old painted surfaces including applying ready made putty wherever required for making good cavities complete all as specified and directed.

Bed Hard Steel (Drawing No. FD/E6/MAP/80 (R)) The following repairs to be carried out:-

Taking out old damaged / broken plywood from its position and refixing the same with new 12mm thick plywood (BWR grade) 07 layer shall fixed with counter sunk nut, bolts and washer as per existing shape all as specified and as directed and shown on drawing.

Taking out old damaged / broken stiffener from its position and refixing the same with new stiffener of size 25mm x 25mm x 16 gauge MS tube shall be fixed through spot welding all as specified and as directed and shown on drawing. Note: Thickness of metal to be welded shall not exceed 2mm.

S&F new rubber /PVC shoes of best quality to the bottom of leg complete all as specified and as shown on drawing.

Taking out old damaged / broken Head board / foot board from its position and S&F new Head board / foot board made with 18 mm thick pre-laminated particle board decorative with natural teak finish both side with 1mm thick laminated beading, complete all as specified and as directed by Engr-in-charge.

M&L in repairs to broken steel frame not exc 2.5 cm in length by spot welding complete all as specified and as directed as shown on drawing. Note: Material to be welded not to exceed 2.00mm in thickness.

M&L for painting to Bed Hard steel by spray machine on complete surface with one coat of Black synthetic enamel paint (1st grade quality) including preparation of old painted surfaces including applying red oxide wherever required complete all as specified and as directed.

Bed Hard Plywood (Drawing No. FD-246/245/213) The following repairs to be carried out:-

Taking out old damaged / broken plywood from its position and refixing the same with new 12mm thick plywood (BWR grade) 07 layer shall fixed with screw as per existing shape all as specified and as directed and shown on drawing.

Taking out old damaged / broken long rail from its position and S&F new long rail using well seasoned Teak wood all as specified and as directed and shown on drawing.

Taking out old damaged / broken Stiffener from its position and S&F new stiffeners using well seasoned Teak wood all as specified and as directed and shown on drawing.

Taking out old damaged / broken Head board from its position and S&F new Head board using well seasoned Teak wood all as specified and as directed and shown on drawing.

Taking out old damaged / broken Foot board from its position and S&F new Foot board using well seasoned Teak wood all as specified and as directed and shown on drawing.

M&L for applying French Polish one or more coat till glossy finish achieved to match with existing surface of Bed Hard plywood including preparation of surfaces and applying wood filler wherever required complete all as specified & as directed and as shown on drawing.

Rack Shoe Steel (Drawing No. FD/E6/MAP-II/2 (R)) The following repairs to be carried out:-

M&L for repair of rack shoes including spot welding in repairs not exc 2.50cm in length of broken structure complete all as specified and as shown in drawing. Note: Material to be welled not to exceed 2.00mm in thickness.

M&L for applying one coat of black synthetic enamel paint (Ist grade quality) on all exposed steel surface of Rack shoe steel including preparation of old painted surface complete all as specified.

Table Centre (Drawing No. FD-235/FD-274) The following repairs to be carried out:-

Taking out old damaged / decayed top from its position and S&F new top as per existing shape and size in the same position made out of 18 mm thick pre-laminated particle board decorative natural teak finish both side including 1mm thick laminated beading all around and applying one coat french polish complete all as specified and directed and shown on drawing.

Taking out old damaged / decayed top from its position and S&F new top as per existing shape and size in the same position made out of 18 mm thick plywood BWR grade with 0.9mm thick sunmica decorative natural teak finish on top including 1mm thick laminated beading all round complete all as specified and directed and shown on drawing.

Taking out old damaged / decayed top from its position and S&F top made with 18mm thick 100% solid WPC (Wood Polymer Composite) laminated board with decorative finish and laminated beading, having minimum density not less than 650Kg/cbm having good screw holding capacity, Termite free, water/moisture proof. Note: Material test certificate and authentication should be provided by the manufacturing company.

Taking out old damaged / decayed leg from its position and S&F new leg in the same position as per existing shape and size made out of well seasoned ‘Teak Wood’ timber including applying one coat french polish over wood filler exposed new timber surfaces completed all as specified and shown on drawing.

All as per item Ser No 10.04 above but long rail and –ditto-.

All as per item Ser No 10.04 above but short rail and –ditto-.

Taking out old unserviceable / damaged shoes and S&F new hard PVC shoes with screw in leg complete all as specified and directed.

M&L for applying French Polish one or more coat till glossy finish achieved to match with existing surface to complete existing/replaced parts after preparation of surfaces and applying wood filler whenever required complete all as specified, directed and shown on drawing.

Table Bed Side (Drawing No. FD/E6/MAP/15(R), FD/E6/MAP/15) The following repairs to be carried out:-

Taking out old damaged decayed leg from its position and S&F new leg in the same position as per existing shape and size made out 18mm square MS pipe 18 gauge painted with powder coated black paint complete all as specified and as shown in drawing.

Taking out old damaged decayed top from its position and S&F new top in the same position as per existing shape and size made out of 18 mm thick prelaminated particle board decorative natural teak finish in both side including teak wood beading all around and applying one coat french polish complete all as specified and directed by Engr-in-charge.

All as per item Ser No 11.02 above but Side (left/right) and –ditto-.

All as per item Ser No 11.02 above but Shelf and –ditto-.

Taking out old damaged decayed back Plywood from its position and S&F new 6mm thick plywood BWR grade the same position as per existing shape and size complete all as specified and as shown in drawing.

Taking out old damaged/ decayed bottom base from its position and S&F new bottom base in the same position as per existing shape and size made out of 18mm thick prelaminated particle board decorative natural teak finish including teak wood beading complete all as specified and as shown in drawing.

Taking out old damaged/ decayed stiffeners/runners from its position and S&F new stiffeners/runners in the same position as per existing shape and size made out of well seasoned teak wood timber complete all as specified and as shown in drawing.

Taking out old damaged/ decayed pull out tray / drawer from its position and S&F new pull out tray / drawer in the same position as per existing shape and size complete all as specified and as shown in drawing.

S&F Stainless steel telescopic channel (thickness 1.5mm), fixed to both side of drawer, fixed with screw, as approved by Engr-in-charge and all as specified and directed (Each set is 02 Nos)

Taking out old unserviceable / damaged shoes and S&F new PVC /hard rubber shoes in leg complete all as specified and directed.

Taking out old damaged / decayed handle from drawer/shutter and S&F new Square 'D' type 100 mm long (4"), Finish type-Nickel handle (Brand-SUZU, material grade-SS316 or equivalent brand ) the same place, complete all as specified & as directed by Engr-in-charge.

M&L for applying French Polish one or more coats till glossy finish achieved to match with existing surface to all exposed/new wooden/plywood surface after preparation of surfaces and applying wood filler wherever required complete all as specified and as shown in drawing.

Table Dining Four Persons (Drawing No. FD/MAP-II/03) The following repairs to be carried out:-

Taking out old damaged/decayed top from its position and S&F new top as per existing shape and size in the same position made out of 18 mm thick pre laminated particle board decorative natural teak glossy finish including 1mm thick laminated beading all round complete as specified and as shown on drawing .

Taking out old damaged / decayed top from its position and S&F top made with 18mm thick 100% solid WPC (Wood Polymer Composite) laminated board with decorative finish and laminated beading, having minimum density not less than 650Kg/cbm having good screw holding capacity, Termite free, water/moisture proof. Note :- Material test certificate and authentication should be provided by the manufacturing company.

Taking out old damaged / decayed top from its position and S&F new top as per existing shape and size in the same position made out of 18 mm thick plywood BWR grade with 0.9mm thick sunmica decorative natural teak finish on top including 1mm thick laminated beading all arround complete all as specified and directed and shown on drawing.

Taking out old damaged / decayed long rail from its position and S&F new long rail in the same position as per existing shape and size made out well seasoned ‘Teakwood’ timber including applying one coat of French polish high glossy finish over wood filler over exposed new timber surfaces compete all as directed and as shown on drawing.

All as per item No 12.04 above here in before but short rail complete all as directed.

All as per item No 12.04 above here in before but leg complete all as directed.

M&L for applying French Polish one or more coat till glossy finish achieved to match with existing surface to all exposed /replaced wooden/plywood surfaces after preparation of surfaces with applying wood filler wherever required complete all as directed and as shown on drawing.

Table Dining Six Persons (Drawing No. FD/MAP-II/03) The following repairs to be carried out:-

Taking out old damaged/decayed top from its position and S&F new top as per existing shape and size in the same position made out of 18 mm thick pre laminated particle board decorative natural teak glossy finish including 1mm thick laminated beading all round complete as specified and as shown on drawing.

Taking out old damaged / decayed top from its position and S&F top made with 18mm thick 100% solid WPC (Wood Polymer Composite) laminated board with decorative finish and laminated beading, having minimum density not less than 650Kg/cbm having good screw holding capacity, Termite free, water/moisture proof. Note :- Material test certificate and authentication should be provided by the manufacturing company.

Taking out old damaged / decayed top from its position and S&F new top as per existing shape and size in the same position made out of 18 mm thick plywood BWR grade with 0.9mm thick sunmica decorative natural teak finish one side to top including 1mm thick laminated beading all around complete all as specified and directed and shown on drawing.

Taking out old damaged / decayed long rail from its position and S&F new long rail in the same position as per existing shape and size made out well seasoned ‘Teakwood’ timber including applying one coat of French polish high glossy finish over wood filler over exposed new timber surfaces compete all as directed and as shown on drawing.

All as per item No 13.04 above here in before but short rail complete all as directed.

All as per item No 13.04 above here in before but leg complete all as directed.

M&L for applying French Polish one or more coat till glossy finish achieved to match with existing surface to all exposed wooden surfaces after preparation of surfaces with applying wood filler wherever required complete all as directed and as shown on drawing.

Table Dining Eight Persons (Drawing No. FD/MAP-II/03) The following repairs to be carried out:-

Taking out old damaged/decayed top from its position and S&F new top as per existing shape and size in the same position made out of 18 mm thick pre laminated particle board decorate natural teak finish with 1mm thick laminated beading all round complete as specified and as shown on drawing .

Taking out old damaged / decayed top from its position and S&F new top as per existing shape and size in the same position made out of 18 mm thick plywood BWR grade with 0.9mm thick sunmica decorative natural teak finish one side to top including 1mm thick laminated beading all around complete all as specified and directed and shown on drawing.

Taking out old damaged / decayed long rail from its position and S&F new long rail in the same position as per existing shape and size made out well seasoned ‘Teakwood’ timber including applying one coat of French polish high glossy finish over wood filler over exposed new timber surfaces compete all as directed and as shown on drawing.

All as per item Ser No 14.03 here in before but short rail complete all as directed.

All as per item Ser No 14.03 here in before but leg complete all as directed.

M&L for applying French Polish one or more coat till glossy finish achieved to match with existing surface to all exposed wooden surfaces after preparation of surfaces with applying wood filler wherever required complete all as directed and as shown on drawing.

Table Dressing Ladies with Mirror (Drawing No. FD-32(M)/FD-251) The following repairs to be carried out:-

Taking out old damaged / decayed leg from its position and S&F new leg in the same position as per existing shape and size made out well seasoned ‘Teakwood’ timber including applying one coat of French polish over wood filler over exposed new timber surfaces complete all as specified & as directed and as shown on drawing.

Taking out old damaged / decayed top from its position and S&F new top as per existing shape and size in the same position made out of 18mm thick plywood BWR grade with 0.9mm thick sunmica decorative natural teak finish one side to over top with Teak wood beading all around complete all as specified and directed.

All as per item Ser No 15.02 here in before but side (left/right) and -deto-.

All as per item Ser No 15.02 here in before but bottom and -deto- .

Taking out old damaged / decayed back ply from its position and S&F new 6mm thick plywood, commercial, grade BWR as per existing shape and size in the same position complete all as specified & as directed and as shown on drawing.

Taking out old damaged / decayed mirror frame form its position and new mirror frame as per existing shape and size in the same position made out of well seasoned teak wood timber and teak wood beading including applying one coat of French polish to all exposed timber and plywood surfaces complete all as specified & directed and as shown on drawing.

Taking out old damaged / decayed drawer bottom from its position and S&F new bottom of same size and shape made out of 6mm thick plywood BWR grade complete all as specified & as directed and as shown on drawing.

Taking out old unserviceable knob from its position and S&F new knob of 25mm chromium plated knob fixed with new brass screws, nut / bolts and washer all as specified & as directed and as shown on drawing.

Taking out old damaged / decayed / broken sliding glass from its position and S&F new sliding glass as per existing shape and size in the same position complete all as specified & as directed and as shown on drawing.

Taking out unsv alluminum channel from its position and S&F new alluminum channel for sliding glass as per existing shape and size in the same position complete all as specified & directed and as shown on drawing.

Taking out old damaged / broken mirror from its position and S&F new mirror of 5mm thick as per existing shape and size replace the same position all as specified and as directed and shown on drawing.

M&L for applying French Polish one or more coat till glossy finish achieved to match with existing surface to all exposed wooden/plywood surfaces including preparation of surfaces applying wood filler wherever required complete all as specified & directed and as shown on drawing.

Table Dressing Ladies with Stool (Drawing No. FD/MAP-II/07) The following repairs to be carried out:-

Taking out old damaged / decayed top from its position and S&F new top as per existing shape and size in the same position made out of 18mm thick pre-laminated particle board with teak wood beading and applying one coat french polish complete all as specified & as directed and as shown on drawing.

All as per item Ser No 16.01 above but sides and –ditto-.

All as per item Ser No 16.01 above but back side and –ditto-.

Taking out old damaged / decayed shutters from its position and S&F new shutter 18mm thick pre-laminated particle board with wooden beading including applying one coat french polish, fixed with stainless steel long piano hinges (thickness not less than 1.2mm ) wherever required complete all as specified & as directed and as shown on drawing.

Taking out old damaged / decayed bottom from its position and S&F new bottom as per existing shape and size in the same position made out of 12mm thick plywood including 1mm thick sunmica inner side all as specified & as directed and as shown on drawing.

Taking out old damaged / decayed mirror frame form its position and supply and fixing of new frame as per existing shape and size in the same position made out of well seasoned teak wood beading and 6 mm thick commercial plywood for back support including applying one coat of French polish high glossy finish complete all as specified & as directed and as shown on drawing.

Taking out old damaged / broken mirror from its position and S&F new mirror of size 5mm thick in the same position as approved all as specified and as directed and as shown on drawing.

Taking out old damaged / decayed drawer from its position and S&F new drawer complete all as specified & as directed and as shown on drawing.

Taking out old damaged / decayed handle from drawer/shutter and S&F new Square 'D' type 100 mm long (4"), Finish type-Nickel handle (Brand-SUZU, material grade-SS316 or equivalent ) the same place, complete all as specified & as directed by Engr-in-charge.

Taking out old damaged / decayed Magnetic catcher from its position and S&F new Magnetic catcher with stainless of same size and shape complete all as specified & as directed and as shown on drawing.

Remove old damaged / unsv foam cushion from its position and S&F new 75mm Thick foam 40 density cushion covered with leatherite as per shape and size complete all as specified & as directed and as shown on drawing.

Taking out old damaged / decayed Revolving Nylon double wheel from its position from stool and S&F new Heavy duty Revolving Nylon double wheel of 50mm dia of same size and shape complete all as specified & as directed and as shown on drawing.

S&F new long/short stiffener at bottom of table dressing ladies made out of 50mm x 30mm section teak wood including applying two coat of French polish high glossy finish complete all as specified & as directed by engr -in-charge.

S&F Stainless steel telescopic channel (thickness 1.5mm), fixed to both side of drawer, fixed with screw, as approved by Engr-in-charge and all as specified and directed (Each set is 02 Nos)

M&L for applying French Polish one or more coat till glossy finish achieved to match with existing surface to all exposed wooden surfaces including preparation of surfaces applying wood filler wherever required complete all as specified & as directed and as shown on drawing.

Table Peg (Drawing No. FD-384) The following repairs to be carried out:-

Taking out old damaged / decayed top from its position and S&F new top as per existing shape and size in the same position made out of 18 mm thick pre-laminated particle board decorate natural teak finish including 1mm thick laminated beading all round complete all as specified, directed and shown on drawing.

Taking out old damaged / decayed top from its position and S&F new top as per existing shape and size in the same position made out of 18 mm thick plywood BWR grade with 1mm thick sunmica decorative natural teak finish including 1mm thick laminated beading all round complete all as specified and directed and shown on drawing.

Taking out old damaged / decayed top from its position and S&F top made with 18mm thick 100% solid WPC (Wood Polymer Composite) laminated board with decorative finish and laminated beading, having minimum density not less than 650Kg/cbm having good screw holding capacity, Termite free, water/moisture proof. Note :- Material test certificate and authentication should be provided by the manufacturing company.

Taking out old damaged / decayed long rail (front/rear) from its position and supply of fixing new long rail as per existing shape and size made out of well seasoned ‘Teakwood’ timber complete all as directed and shown on drawing.

All as per item No 17.04 above here in before but for short rail (right/left) complete all as directed.

All as per item No 17.04 above here in before but for leg complete all as directed.

Taking out old unserviceable / damaged shoes and S&F new PVC shoes in leg as per existing specifications. Complete all as specified.

M&L for applying French Polish one or more coat till glossy finish achieved to match with existing surface to exposed wooden surfaces including preparation of surfaces and applying wood filler wherever required complete all as directed.

Teapoy (Drawing No. FD-382) The following repairs to be carried out:-

Taking out old damaged / decayed top from its position and S&F new top as per existing shape and size in the same position made out of 18 mm thick pre-laminated particle board decorate natural teak finish including 1mm thick laminated beading all around complete all as specified, directed and shown on drawing.

Taking out old damaged / decayed top from its position and S&F new top as per existing shape and size in the same position made out of 18 mm thick plywood BWR grade with 0.9mm thick sunmica decorative natural teak finish on top including 1mm thick laminated beading all around complete all as specified and directed and shown on drawing.

Taking out old damaged / decayed top from its position and S&F top made with 18mm thick 100% solid WPC (Wood Polymer Composite) laminated board with decorative finish and laminated beading, having minimum density not less than 650Kg/cbm having good screw holding capacity, Termite free, water/moisture proof. Note :- Material test certificate and authentication should be provided by the manufacturing company

Taking out old damaged / decayed long rail (front/rear) from its position and supply of fixing new long rail as per existing shape and size made out of well seasoned ‘Teakwood’ timber including applying one coat of French polish high glossy finish over wood filler in all exposed timber surfaces complete all as specified and shown on drawing.

All as per item Ser No 18.04 above here in before but for short rail (right/left) complete all as directed.

All as per item Ser No 18.04 here in before but for leg complete all as directed.

Taking out old unserviceable / damaged shoes and S&F new PVC/hard rubber shoes in leg as per existing specifications. Complete all as specified.

M&L for applying French Polish one or more coat till glossy finish achieved to match with existing surface to exposed wooden surface including preparation of surface and applying wood filler to new components complete all as specified and directed.

Teapoy Verandah (Drawing No. FD-35(M)/FD-255, FD/E6/MAP/17) The following repairs to be carried out:-

Taking out old damaged / decayed top from its position and S&F new top as per existing shape and size in the same position made out of 18 mm thick pre-laminated particle board decorate natural teak finish including 1mm thick laminated beading all round complete all as specified, directed and shown on drawing.

Taking out old damaged / decayed top from its position and S&F new top as per existing shape and size in the same position made out of 18 mm thick plywood BWR grade with 0.9mm thick sunmica decorative natural teak finish on top including 1mm thick laminated beading all around complete all as specified and directed and shown on drawing.

Taking out old damaged / decayed top from its position and S&F top made with 18mm thick 100% solid WPC (Wood Polymer Composite) laminated board with decorative finish and laminated beading, having minimum density not less than 650Kg/cbm having good screw holding capacity, Termite free, water/moisture proof. Note : Material test certificate and authentication should be provided by the manufacturing company

M&L for repair to broken frame of teapoy verandah by spot welding not exc 2.50cm in length complete all as specified and as directed. Note : Materials to be welded not exc. 2.50 cm in thickness.

M&L for painting to steel frame applying one coat of white synthetic enamel paint (1st grade quality) all as specified and as directed (FD-35(M)/FD-255).

M&L for painting to steel frame applying one coat of black synthetic enamel paint (1st grade quality) all as specified and as directed (FD/E6/MAP/17)

Taking out old unserviceable / damaged shoes and S&F new PVC/hard rubber shoes in leg complete all as specified and directed (FD/E6/MAP/17).

Side Board (Drawing No. FD-241 & FD-1112) The following repairs to be carried out:-

Taking out old damaged/decayed leg from its position and S&F new leg in the same position as per existing shape and size made out of well seasoned ‘Teak Wood’ timber including applying one coat of French polish over wood filler over exposed new timber surfaces complete all as specified and as shown on drawing.

S&F stiffener on all around (long&short) at bottom/base of side board, made with 75mm x 30mm section teak wood including one coat of french polish high glossy complete all as specified and directed by engr-in-charge .

All as per Ser No 20.02 above but stiffener (size 25 x 25mm section) and –ditto-.

Taking out old damaged/decayed bottom from its position and S&F new bottom base in the same position as per existing shape and size made out of 18mm thick ply wood BWR grade with 0.9mm thick sunmica one side teak finish with teak wood beading complete all as specified and as shown on drawing.

Taking out old damaged/decayed bottom from its position and S&F new bottom base in the same position as per existing shape and size made out of 18mm thick prelaminated particle board decorative teak face both side and teak wood beading including applying French polish high glossy finish complete all as specified and as shown on drawing.

Taking out old damaged/decayed door shutter from its position and S&F new door shutter both part made out of 18mm thick plywood BWR grade with supply & fixing of 0.9 mm thick sunmica one side teak face finish on external surfaces of plywood, 4mm thick teak wood beading all around and fixed with piano type continuous stainless steel hinges with screw to frame including applying one coat of French polish over wood filler over all internal new timber/plywood surfaces complete all as specified and as shown on drawing.

All as per Ser No 20.05 above with prelaminated particle board but door shutter and –ditto-

Taking out old damaged/decayed back ply wood from its position and S&F new plywood 6mm thick commercial BWR grade fixed in the same position as per existing shape and size including applying one coat of French polish complete all as specified & as directed and shown drawing.

Taking out old damaged/decayed top from its position and S&F new top in the same position as per existing shape and size made out of 18mm thick plywood BWR grade with 0.9mm sunmica one side teak face including teak wood beading all around complete all as specified & as directed and as shown on drawing.

All as per Ser No 20.05 above with prelaminated particle board but Top and –ditto-

All as per Ser No 20.09 above but side(left/right) and –ditto-.

All as per Ser No 20.05 above with prelaminated particle board but side(left/right) and –ditto-

All as per Ser No 20.09 above but inner shelf and –ditto-.

All as per Ser No 20.05 above with prelaminated particle board but inner shelf and –ditto-

Taking out old damaged / decayed drawer from its position and S&F new drawer of same size and shape made out of well seasoned Teak wood timber for side and back, 6mm thick plywood commercial type for bottom and 18 mm plywood BWR grade with sunmica on front including 4mm thick teak wood beading, apply one coat of french polish to wooden surface complete all as specified & as directed and as shown on drawing.

Taking out old damaged / decayed handle from drawer/shutter and S&F new Square 'D' type 100 mm long (4"), Finish type-Nickel handle (Brand-SUZU, material grade-SS316 or equivalent brand ) the same place, complete all as specified & as directed by Engr-in-charge.

S&F new magnetic catcher with stainless steel plate fixed with screw after taking out old unserviceable magnetic catcher from its position complete all as specified & as directed and as shown on drawing.

M&L for applying French Polish one or more coat till glossy finish achieved to match with existing surface in all wooden/plywood surfaces of side board including preparation of surfaces including applying wood filler wherever required complete all as specified & directed and as shown on drawing.

Table Writing (Drawing No. FD-275) The following repairs to be carried out:-

Taking out old damaged/decayed leg from its position and S&F new leg in the same position as per existing shape and size made out of well seasoned teak wood’ timber all as specified, directed and shown on drawing.

All as per Ser No 21.01 above but top rails(long/short) and –ditto-

All as per Ser No 21.01 above but stiffener(long/short/rear/left/right) and –ditto-

Taking out old damaged/decayed top from its position and S&F new top as per existing shape and size made out of 18mm thick plywood BWR grade with 0.9mm sunmica decorative teak face and teak wood beading complete all as specified, directed and shown on drawing.

Taking out old damaged/decayed back from its position and S&F new 6mm thick plywood commercial BWR grade to same position including one coat french polish high glossy finish as per existing shape and size including all as specified, directed and shown on drawing

Taking out old damaged/decayed front shutter of table writing from its position and S&F new front shutter of made out of 18mm thick plywood BWR grade with 0.9mm thick sunmica decorative teak face and teak wood beading all around and fixed with stainless steel continuous type hinges all as specified, directed and shown on drawing.

Taking out old damaged/decayed cabinet sides (left/right) from its position and S&F new sides made out of 18mm thick plywood BWR grade with 0.9mm thick sunmica decorative teak face to outer surface and teak wood beading complete all as specified, directed and shown on drawing.

Taking out old damaged/decayed inner shelf of cup board from its position and S&F new inner shelf the same position as per existing shape and size made out of 18mm thick prelaminated particle board including 4mm thick teak wood beading in front side including applying one coat of French polish complete all as specified & as directed and as shown on drawing.

Taking out old damaged/decayed bottom of cup board from its position and S&F new bottom made out of 18mm thick plywood BWR grade with 0.9mm thick sunmica decorative teak face and teak wood beading complete all as specified, directed and shown on drawing.

Taking out unserviceable knob front its position and S&F new chromium plated knob in the same position with new MS screw/nuts/bolts and washer complete all as specified, directed and shown on drawing.

M&L for fixing of Square 'D' type 100 mm long (4"), Finish type-Nickel handle (Brand-SUZU, material grade-SS316 or equivalent brand ) the same place, complete all as specified & as directed by Engr-in-charge.

Taking out unserviceable damaged lock from table writing and S & F new Stainless steel multipurpose lock with Key (Brand-Jainson, model 414 / MP-330EPL or equivalent brand) as approved by Engr-In-Charge, complete all as specified, directed and shown on drawing.

M&L for applying French Polish one or more coat till glossy finish achieved to match with existing surface to all wooden /plywood existing/replaced parts after preparation of surfaces and applying wood filler whenever required complete all as specified, directed and shown on drawing.

Sofa Set 5 Seater Wooden (Drawing No. FD-281/FD/MAP-II/02) The following repairs to be carried out:-

Taking out old damaged/decayed front long rail from sofa 3 seater and S&F new front long rail made with well seasoned teak wood of size 35 x 100mm section with apply one coat french polish glossy finish after applying wood filler, complete all as specified and as shown in drawing.

All as per ser No 22.01 above but rear long rail (top/bottom) of size 35 x 70mm section and –ditto-

Taking out old damaged/decayed front long rail from sofa single seater and S&F new front long rail made with well seasoned teak wood of size 35 x 100mm section with apply one coat french polish glossy finish after applying wood filler, complete all as specified and as shown in drawing.

All as per ser No 22.03 above but rear long rail (top/bottom) of size 35 x 70mm section and –ditto-

Taking out old damaged/decayed short rail(left/right) from sofa (three seater /single seater) and S&F new short rail (left/right) made with well seasoned teak wood of size 35 x 100mm section with apply one coat french polish glossy finish after applying wood filler, complete all as specified and as shown in drawing.

All as per Ser No 22.05 above but leg (front/back) of size 35 x 75mm section and –ditto-

All as per Ser No 22.05 above but wooden Batten (Three seater /One seater) of size 50 x 25mm section and –ditto- (FD-281)

All as per ser No 22.05 above but wooden Bearers/stiffner (Three seater /One seater) of size 40 x 40 mm section and –ditto-.

All as per ser No 22.05 above but Arms (Three seater /One seater) of size 75 x 35 mm section and –ditto-.

Taking out old damaged/decayed Plywood from seat/back of sofa set 3 seater and S&F new the same position as per existing shape and size made 12mm thick plywood commercial BWR grade complete all as specified. (FD/MAP-II/2)

Taking down worn out/damaged tapestry cloth cover from foam cushion and supply and fixing new cover made with Thai Matty Fabric, plain pattern multicolor tapestry cloth, as approved by Engr -in-charge, complete all as specified and as shown in drawing. Note : The cost of tapestray cloth not less than Rs. 290/- per mtr.

Taking out old unserviceable/damaged foam cushion and S&F new foam cushion of 'cool' foam of 32 density 530mm x 500mm and 100mm thick with cover and chain as approved by Engr -in-charge, complete all as specified and directed. Note: The cost of tapestray cloth not less than Rs. 290/- per mtr.

M&L for preparation of wooden surfaces of sofa 5 seater (3+1+1) and applying French Polish one or more coat till glossy finish achieved to match with existing surface including applying of wood filler wherever required complete all as specified and as shown in drawing.

Sofa Set 4 Seater Wooden (Drawing No. FD-281/FD/MAP-II/02) The following repairs to be carried out:-

Taking out old damaged/decayed front long rail from sofa single seater and S&F new front long rail made with well seasoned teak wood of size 35 x 100mm section with apply one coat french polish glossy finish after applying wood filler, complete all as specified and as shown in drawing.

All as per ser No 23.01 above but rear long rail (top/bottom) of size 35 x 70mm section and –ditto-

Taking out old damaged/decayed short rail(left/right) from sofa and S&F new short rail (left/right) made with well seasoned teak wood of size 35 x 100mm section with apply one coat french polish glossy finish after applying wood filler complete all as specified and as shown in drawing.

All as per ser No 23.03 above but leg (front/back) of size 35 x 75mm section and –ditto-

All as per ser No 23.03 above but wooden Batten of size 50 x 25mm section and –ditto- (FD-281)

All as per ser No 23.03 above but wooden Bearers/stiffener of size 40 x 40 mm section and –ditto-.

All as per ser No 23.03 above but Arms of size 75 x 35 mm section and –ditto-.

Taking out old damaged/decayed Plywood from seat/back of sofa set single seater and S&F new the same position as per existing shape and size made 12mm thick plywood commercial BWR grade complete all as specified. (FD/MAP-II/2)

Taking down worn out/damaged tapestry cloth cover from foam cushion and supply and fixing new cover made with Thai Matty Fabric, plain pattern multicolor tapestry cloth, as approved by Engr -in-charge, complete all as specified and as shown in drawing. Note : The cost of tapestray cloth not less than Rs. 290/- per mtr.

Taking out old unserviceable/damaged foam cushion and S&F new foam cushion of 'cool' foam of 32 density 530mm x 500mm and 100mm thick with cover and chain as approved by Engr -in-charge, complete all as specified and directed. Note : The cost of tapestray cloth not less than Rs. 290/- per mtr.

M&L for preparation of wooden surfaces of sofa 4 seater and applying French Polish one or more coat till glossy finish achieved to match with existing surface including applying of wood filler wherever required complete all as specified and as shown in drawing.

Table Dressing Gents with Mirror (Drawing No. FD/E6/MAP/16) The following repairs to be carried out:-

Taking out old damaged / decayed legs from table dressing gents and S&F new legs in the same position as per existing shape and size made out of teak wood complete all as specified and as shown on drawing.

Taking out old damaged / decayed back ply wood from its position and S&F new 12mm thick plywood BWR grade including applying one coat french polish high glossy finish as per existing shape and size complete all as specified and as shown on drawing.

Taking out old damaged / decayed frame of table dressing gents (Top, bottom and sides for each frame) form its position and S&F new frame (top, bottom and sides) of same as per existing shape and size made with 18mm thick plywood BWR grade with 1mm thick sunmica for outer surface, applying One coat french polish to inner surface of frame, complete all as specified and as shown on drawing.

Taking out old damaged / decayed glass shelves from its position and S&F new glass 5.5mm thick with glass holder fixed with screw as per existing shape and size complete all as specified and as shown on drawing.

Taking out old damaged / decayed back ply wood from mirror frame and S&F new back plywood of size 12mm thick BWR grade as per existing shape and size including applying one coat french polish high glossy finish, complete all as specified and as shown on drawing.

Taking out old damage/broken mirror frame its position and S&F new mirror frame with continuous stainless steel piano type hinges in the same position made out of well seasoned ‘Teakwood’ timber as per existing shape and size including applying one coat french polish complete all as specified and as shown on drawing.

S&F of new steel continous hinges as per existing shep and size for fixing of mirror frame complete all as specified and directed.

Taking out old broken / decayed mirror from its position and S&F new 5.5mm thick looking mirror of the same as per existing shape and size complete all as specified and as shown on drawing.

M&L for applying French Polish one or more coat till glossy finish achieved to match with existing surface to exposed wooden surface including preparation of surface and applying wood filler to new components complete all as specified and as directed.

Bin Liner Multi Purpose (Drawing No. FD/E6/MAP/09) The following repairs to be carried out:-

Taking out old damaged/decayed top from its position and S&F new top in the same position as per existing shape and size made out of 18mm thick pre-laminated particle board both side teak face including 4 mm thick teak wood beading all around complete all as specified & directed and as shown on drawing.

All as per Ser No 25.01 above but sides (left/right) and –ditto-.

All as per Ser No 25.01 above but bottom and –ditto-.

All as per Ser No 25.01 above but inter shelves and –ditto-.

Taking out old damaged/decayed door shutter from its position and S&F new door shutter both part made out of 18mm thick pre-laminated particle board including 4mm thick teak wood beading all around and fixed with new continuous stainless steel piano type hinges with screw including applying one coat of French polish high glossy finish complete all as specified and as shown on drawing.

Taking out old damaged/decayed back ply wood from its position and S&F new plywood 12mm thick commercial BWR grade as per existing shape and size including applying one coat of French polish complete all as specified & as directed and shown drawing.

S&F stiffener on all around (long&short) at bottom/base of bin multipurpose, made with 75mm x 30mm section teak wood including one coat of french polish high glossy complete all as specified and directed by engr-in-charge .

All as per Ser No 25.07 above but stiffener of 25x 25mm section and –ditto-.

Taking out old damaged /decayed drawer from its position and S&F new drawer of same size and shape made out of 12mm thick commercial plywood for both side and back , 6mm thick plywood for bottom and 18mm thick prelaminated particle board exterior grade for front of drawer including 4mm thick teak wood beading , apply one coat of french polish to new surface complete all as specified & as directed and as shown on drawing.

Taking out old damaged / decayed handle from drawer/shutter and S&F new Square 'D' type 100 mm long (4"), Finish type-Nickel handle (Brand-SUZU, material grade-SS316 or equivalent brand ) the same place, complete all as specified & as directed by Engr-in-charge.

S&F new megnatic catcher with stainless steel plate fixed with screw after taking out old unserviceable megnatic catcher from its position complete all as specified & as directed and as shown on drawing.

S&F Stainless steel telescopic channel (thickness 1.5mm), fixed to both side of drawer, fixed with screw, as approved by Engr-in-charge and all as specified and directed (Each set is 02 Nos)

M&L for applying French Polish one or more coat till glossy finish achieved to match with existing parts in all exposed/replaced wooden /plywood parts after preparation of surfaces including applying wood filler wherever required complete all as specified & directed and as shown on drawing.

Hat Stand (Drawing No. FD-233) The following repairs to be carried out:-

Taking out old broken / decayed mirror from its position and S&F new 5.5mm thick looking mirror of the same as per existing shape and size complete all as specified and as shown on drawing.

Taking out old damaged/decayed wooden edging from its position and S&F new edging arroubd in the same position as per existing shape and size made out of well seasoned ‘Teak Wood’ timber 35mm x 6mm thick including applying one coat of French polish over wood filler over exposed new timber surfaces complete all as specified and as shown on drawing.

Taking out old damaged / decayed back ply from its position and S&F new 4mm thick plywood BWR grade including one coat french polish to new surface complete all as specified & as directed and as shown on drawing.

Taking out old damaged / decayed front ply from its position and S&F new 4mm thick plywood BWR grade with 0.9mm thick sunmica one side teak face complete all as specified & as directed and as shown on drawing.

Taking out old damaged / decayed pegs from its position and S&F new pegs as per existing shape and size made with brass chromium plated fixed with brass screw, complete all as specified & as directed and as shown on drawing.

M&L for applying French Polish one or more coat till glossy finish achieved to match with existing parts in all exposed/replaced wooden/plywood parts after preparation of surfaces including applying wood filler wherever required complete all as specified & as directed and as shown on drawing.

Book Case (Drawing No. FD-45(M)/FD-237) The following repairs to be carried out:-

Taking out old broken / decayed leg from its position and S&F new leg of the same as per existing shape and size made with Teak wood including applying one coat french polish high gloss finish complete all as specified and as shown on drawing.

All as per Ser No 27.01 above but leg stiffener(long/short) and –ditto-

Taking out old damaged/decayed top from its position and S&F new top in the same position as per existing shape and size made out of 18mm thick prelaminated particle board both side teak face including 4 mm thick teak wood beading all around and applying one coat french polish complete all as specified & as directed and as shown on drawing.

Taking out old damaged/decayed top from its position and S&F new top in the same position as per existing shape and size made out of 18mm thick plywood BWR grade with sunmica one side teak face including 4 mm thick teak wood beading all around and applying one coat french polish complete all as specified & as directed and as shown on drawing.

All as per Ser No 27.04 above but both side and –ditto-

All as per Ser No 27.03 above with prelaminated particle board but both side and –ditto-

All as per Ser No 27.04 above but bottom and –ditto-

All as per Ser No 27.03 above with prelaminated particle board but bottom and –ditto-

All as per Ser No 27.03 above with prelaminated particle board but shelve/inner partition and –ditto-

All as per Ser No 27.04 above but shutter and –ditto-

All as per Ser No 27.03 above with prelaminated particle board but shutter and –ditto-

Taking out old damaged/decayed back ply wood from its position and S&F new 6mm thick plywood BWR Grade as per existing shape and size complete all as specified & as directed and shown drawing.

Taking out old damaged/decayed continuous Hinges piano type from its position and S&F new continuous Hinges piano type fixed in the same position with screw as per existing shape and size complete all as specified & as directed and shown drawing.

Taking out old damaged / decayed Knob from its position and S&F new chromium plated knob the same place, complete all as specified & as directed and as shown on drawing.

M&L for fixing of Square 'D' type 100 mm long (4"), Finish type-Nickel handle (Brand-SUZU, material grade-SS316 or equivalent brand ) the same place, complete all as specified & as directed by Engr-in-charge.

S&F new magnetic catcher with stainless steel plate fixed with screw after taking out old unserviceable magnetic catcher from its position complete all as specified & as directed and as shown on drawing.

M&L for applying French Polish one or more coat till glossy finish achieved to match with existing parts in all exposed/replaced wooden/plywood parts after preparation of surfaces including applying wood filler wherever required complete all as specified & as directed and as shown on drawing.

Chair School with Hand Board (Drawing No. FD/E6/MAP/05) The following repairs to be carried out:-

Taking out old damaged / decayed top fromits position and S&F new top made out of 18mm thick prelaminated particle board decorative with one side natural teak finish and other side white with 1mm thick lamination beading all arround fixed with MS wood screw complete all as specified and as shown on drawing.

Taking out old damaged / decayed top from its position and S&F new top as per existing shape and size in the same position made out of 18 mm thick plywood BWR grade fixed with 0.9mm thick sunmica decorative natural teak finish for on top and another side of plywood is white laminated including 1mm thick laminated beading all arround complete all as specified and directed and shown on drawing.

Taking out old damaged / decayed PVC back and seat in one piece from its position and S&F PVC back and seat in one piece fixed with screw, blow plast or equivalent complete all as specified and as shown on drawing.

Taking out old damaged / decayed hollow steel pipe with hinges form its position and S&F (RHS) Hollow steel pipe 25mm dia with hinges, inserted to frame and fixed to frame for slide on rod for adjustment of openable table top, complete all as specified and as shown on drawing.

M&L for repair of chair school with hand board with spot welding or minor repair and make it serviceable condition, complete all as specified and as shown in drawing. Note : Material to be weled not to exceed 2.00mm in thickness.

M&L for applying one coat of Black synthetic enamel paint (Ist grade quality) on all exposed steel surface of chair school including preparation of old painted surface complete all as specified.

S&F new rubber shoes of best quality to the bottom of leg complete all as specified and as shown on drawing.

Charpoy IP with Hard Top (FD/MAP-II/ 01) The following repairs to be carried out:-

Taking out old damaged / broken plywood from its position and refixing the same with new 12mm thick plywood (BWR grade) 07 layer shall fixed with counter sunk nut, bolts and washer as per existing shape all as specified and as directed.

Taking out old damaged / broken stiffener from its position and refixing the same with new stiffener of size 25mm x 25mm x 16 guage MS tube shall be fixed through spot welding all as specified and as directed.

S&F new rubber shoes of best quality to the bottom of leg complete all as specified and as shown on drawing.

M&L for one coat of Black synthetic enamel paint (1st grade quality) on all exposed steel surface of Charpoy hard after preparation of old painted surfaces including applying red oxide wherever required complete all as specified and as directed.

M K Engineering WOrks

samrat saw mill and joinery workshop