Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | 1₹27.4 LAccepted-AOC | ₹27.4 L Quoted ₹29.9 L | 1 | Accepted-AOC RANK 1 |
| 2 | 2₹33.9 L+₹3.9 L (13.1%)Rejected-Finance H NO B 111 76 2 PAKHON WAL BAGH SAHORIA STREET BARNALA | SANGRUR | PUNJAB | 148024 | ₹33.9 L+₹3.9 L (13.1%) | 2 | Rejected-Finance RANK 2 |
| Sl No | Description | Qty | Unit | SHIV KUMAR CONTRACTOR L2 | VIRK CONTRACTORS L1 |
|---|---|---|---|---|---|
| 1.00 | Excavation by mechanical means(JCB or Hydraulic excavator) in trenches for pipe lines with straight or open cutting in streets or open area including dressing sides levelling of beds of trenches to correct grade, cutting joint holes, refilling consolidation, including the cost of diversion for traffic, crossing over trenches for access to the houses, watching, fencing, etc. and removal of surplus soil out side/inside the town involving lead upto 15 meter complete in all respect. | 1 | cum | 118 ₹118 | 105.97 ₹105.97 Lowest |
| 2.00 | Earth work in excavation in foundations trenches etc. in all kinds of soil where Pick-Jumper work is not involved and not exceeding 2.0 metres depth including dressing of bottom and sides of trenches, stacking the excavated soil clear from the edge of excavation and subsequent filling around masonry in 15 cm, layers with compaction including disposal of all surplus soil as directed within lead of 30 metres. | 1 | cum | 240 ₹240 | 216.68 ₹216.68 Lowest |
| 3.00 | First class brick masonary 229 mm thick laid in cement sand mortar 1.6 in foundation and plinth including supply recarriage of bricks cement. | 1 | cum | 8,126 ₹8,126 | 7,443.31 ₹7,443.31 Lowest |
| 4.00 | 10mm thick cement plaster 1.4 on sides walls | 1 | sqm | 216 ₹216 | 195.23 ₹195.23 Lowest |
| 5.00 | 10mm thick cement plaster 1:4 on bed and top. | 1 | sqm | 167 ₹167 | 150.71 ₹150.71 Lowest |
| 6.00 | Reinforced cement concrete 1:2:4 hand mixed but including steel reinforcement | 1 | cum | 12,397 ₹12,397 | 11,206.16 ₹11,206.16 Lowest |
| 7.00 | Cement Conc.1:2:4 including supply, carriage & with stone ballast or shingle | 1 | cum | 6,733 ₹6,733 | 6,085.91 ₹6,085.91 Lowest |
| 8.00 | Cement concrete 1:4:8 with brick ballast 40mm gauge | 1 | cum | 5,185 ₹5,185 | 4,686.57 ₹4,686.57 Lowest |
| 9.00 | Lowering, jointing of UPVC pipes 315 mm dia laying same to correct gradient and alignment and jointing ends in all depths complete in all respect. | 1 | metre | 97 ₹97 | 77 ₹77 Lowest |
| 10.00 | Providing and fixing Elbow/bends of 90 degree 6kg/cm2 pressure as per IS 4985 i/c testing commisioning and complete in all respect to the specification of engineer in charge | 1 | each | 12,250 ₹12,250 | 9,700 ₹9,700 Lowest |
Tender Value
₹54.7 L
EMD Value
₹1.1 L
Closing Date
5 Mar 2026, 10:00 amClosed
EXECUTIVE ENGINEER LUDHIANA CANAL AND GROUND WATER
EXECUTIVE ENGINEER LUDHIANA CANAL AND GROUND WATER DIVN WRD NEAR DURGA MATA MANDIR PHASE 1 LDH
Estimate for Laying of Underground uPVC Pipeline of Outlet at RD 18000/TF of 4-R Disty (Labour Component)
2026_WR_159893_9
558/28A
Open Tender
Civil Works - Canal
Item Rate
90 days
4R DISTRIBUTARY
Estimate for Laying of Underground uPVC Pipeline of Outlet at RD 18000/TF of 4-R Disty (Labour Component)
2 documents required · 2 mandatory
₹1,000
₹1.1 L
Yes
21 Apr 2026
11 Feb 2026
5 Mar 2026
11 Feb 2026
5 Mar 2026
11 Feb 2026
Excavation by mechanical means(JCB or Hydraulic excavator) in trenches for pipe lines with straight or open cutting in streets or open area including dressing sides levelling of beds of trenches to correct grade, cutting joint holes, refilling consolidation, including the cost of diversion for traffic, crossing over trenches for access to the houses, watching, fencing, etc. and removal of surplus soil out side/inside the town involving lead upto 15 meter complete in all respect.
Earth work in excavation in foundations trenches etc. in all kinds of soil where Pick-Jumper work is not involved and not exceeding 2.0 metres depth including dressing of bottom and sides of trenches, stacking the excavated soil clear from the edge of excavation and subsequent filling around masonry in 15 cm, layers with compaction including disposal of all surplus soil as directed within lead of 30 metres.
First class brick masonary 229 mm thick laid in cement sand mortar 1.6 in foundation and plinth including supply recarriage of bricks cement.
10mm thick cement plaster 1.4 on sides walls
10mm thick cement plaster 1:4 on bed and top.
Reinforced cement concrete 1:2:4 hand mixed but including steel reinforcement
Cement Conc.1:2:4 including supply, carriage & with stone ballast or shingle
Cement concrete 1:4:8 with brick ballast 40mm gauge
Lowering, jointing of UPVC pipes 315 mm dia laying same to correct gradient and alignment and jointing ends in all depths complete in all respect.
Providing and fixing Elbow/bends of 90 degree 6kg/cm2 pressure as per IS 4985 i/c testing commisioning and complete in all respect to the specification of engineer in charge
Wrought Iron and mild steel ladders, framed grills, grating etc. complete fixed in position in D-tank
Providing & fixing M.S. foot rests made of 23x25 mm square bar including fixing in Haudis complete with cement concrete 1:2:4
Providing and fixing of Alfa Valve fitted on riser pipe to act as Nakka (D regulators)
Centreing & shuttering for Concerte faces
Providing & Fixing of Steel Shutter Gate Assembly in Main Pipeline complete in all respect
Dismantling of Brick work in Cement
(Carriage) For UPVC/HDPE pipes all sizes (Truck load 2.20 tonnes) Goraya rest house excluding loading and unloading
Providing & fixing double air valve ISI Marked as per IS-14845 including jointing all carriages complete .C.I Double air valve (Size 140mm)
Providing and fixing equal Tee of 6kg/cm2 pressure as per IS 4985 i/c testing commisioning and complete in all respect to the specification of engineer in charge
Providing and fixing Unequal Tee/ Reducer Bush 315 x140 mm of 6kg/cm2 pressure as per IS 4985 i/c testing commisioning and complete in all respect to the specification of engineer in charge
Providing and fixing Tail end piece 315 mm of 6 kg/cm2 pressure as per IS 4985 i/c testing commisioning complete in all respect to the satisfaction of engineer in charge
Supply and installation of anti theft mechanism for alfa valve of size 315 mm
Providing & fixing C.I/D.I Flanged end, stem of SS (AIS 1410) and Bronze(gunmetal) working parts Sluice Valves (250mm) ISI marked 14846-2000, including jointing , testing & cost of Nut ,Bolt & insertion sheet, all carriage complete (with the approval of Engineer in-charge). B) Class PN-1.6 as per ISI
Lowering, jointing and cutting of UPVC pipe 140mm dia for vent pipe in trenches and laying same to correct alignment
stage.html
html • 0.04 MB
technical_324464.pdf
techsummary_324464.pdf
finance_324464.pdf
BOQ Comparative Chart
xlsx
finsummary_324464.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.54 MB
BOQ_324464.xls
BOQ • 0.32 MB
C27032026.pdf
PDF • 0.49 MB
C19032206.pdf
PDF • 0.54 MB
C12032026.pdf
PDF • 0.09 MB
C05032026N.pdf
PDF • 0.50 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .