Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹3.4 LAccepted-AOC | L1 | Accepted-AOC L1 | |
| 2 | L2₹3.6 L+₹18,053.40 (5.24%)Rejected-Finance | L2 | Rejected-Finance L2 | |
| 3 | L3₹3.7 L+₹22,367.51 (6.49%)Rejected-Finance VIJAY BHAVAN PUNNAVILAKAM VETTU ROAD PALLIPPURAM KANIYAPURAM P O TRIVANDRUM 695301 | TRIVANDRUM | THIRUVANANTHAPURAM | KERALA | 695301 | L3 | Rejected-Finance L3 | |
| 4 | L4₹3.8 L+₹37,975.63 (11.0%)Rejected-Finance | L4 | Rejected-Finance L4 |
| Sl No | Description | Qty | Unit | Abhinesh Anandan L2 | Vinod C L4 | VIJAYAKUMAR M L3 | JAYAN A L1 |
|---|---|---|---|---|---|---|---|
| 1.00Ayurveda dispensary maintenance | |||||||
| 1.00 | 10.16.1:Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.Hot finished welded type tubes | 639.77 | kg | 156.44 ₹1,00,085.31 | 158.21 ₹1,01,217.7 | 150.15 ₹96,061.17 | 148.65 ₹95,101.51 Lowest |
| 1.00 | 50.10.2:Steel work for purlin/single section with G I pipes including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete | 95.19 | kg | 150.61 ₹14,337.32 | 158.89 ₹15,125.53 | 135.56 ₹12,904.63 Lowest | 143.13 ₹13,625.26 |
| 1.00 | 12.50:Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+0.05%), total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x55mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. | 52.92 | sqm | 678.12 ₹35,886.11 | 715.39 ₹37,858.44 | 676.96 ₹35,824.72 | 644.4 ₹34,101.65 Lowest |
| 1.00 | 12.51.1:Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+0.05 %) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screwscomplete :Ridges plain (500-600 mm) | 11.6 | metre | 454.99 ₹5,277.88 | 480 ₹5,568 | 439.3 ₹5,095.88 | 432.28 ₹5,014.45 Lowest |
| 1.00 | 21.1.1.2:Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS : 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminnium snap beading for glazing /paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge.(Glazing, paneling and dash fasteners to be paid for separately):
For fixed portionPowder coated aluminium (minimum thickness of powder coating 50 micron) | 19.98 | kg | 470.83 ₹9,407.18 | 496.71 ₹9,924.27 | 470.18 ₹9,394.2 | 447.42 ₹8,939.45 Lowest |
| 1.01 | 21.1.2.2:For shutters of doors, windows & ventilators including providing and fixing hinges / pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/ neoprene gasket required (Fittings shall be paid for separately)Powder coated aluminium (minimum thickness of powder coating 50 micron) | 15.65 | kg | 570.29 ₹8,925.04 | 626.68 ₹9,807.54 | 584.3 ₹9,144.3 | 541.94 ₹8,481.36 Lowest |
| 1.01 | 21.3.1:Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of Engineer - in -Charge. ( Cost of aluminium snap beading shall be paid in basic item):With float glass panes of 4.0 mm thickness (weight not less than 10kg/sqm) | 4.68 | sqm | 1,029.73 ₹4,819.14 | 1,086.34 ₹5,084.07 | 1,038.18 ₹4,858.68 | 978.56 ₹4,579.66 Lowest |
| 1.01 | 50.12.4.2:Providing and fixing false ceiling with 7.5 mm thick PVC wooden grains panel board ceiling of approved quality in aluminium frame work with necessary screws etc complete ( aluminium frame work shall be paid separately) | 16.91 | sqm | 841.43 ₹14,228.58 | 918.35 ₹15,529.3 | 961.82 ₹16,264.38 | 799.6 ₹13,521.24 Lowest |
| 1.01 | 50.6.1.7:Solid block masonry using pre cast solid blocks ( Factory made) of size 40x20x15cm or nearest available size confirming to IS 2185 part I of 1979 for foundation and plinth with thickness 15 cm in : CM 1:6 ( 1 cement : 6 coarse sand ) etc complete | 4.76 | cum | 5,643.66 ₹26,852.53 | 6,124.15 ₹29,138.71 | 6,966.96 ₹33,148.8 | 5,363.1 ₹25,517.63 Lowest |
Tender Value
₹4.2 L
EMD Value
₹10,592
Closing Date
29 Sept 2025, 5:00 pmClosed
AE LID AND EW BEDADUKA GP
AE LID AND EW BEDADUKA GP
BEDADUKKA GP PRO NO 232 2025 26 MAINTENANCE FOR AYURVEDA DISPENSARY
2025_LSGD_800107_11
05 AE LID AND EW BDKA PHASE V
Open Tender
Civil Works - Roads
Item Rate
Bedadukka GP
please refer Tender Documents
8 documents required · 8 mandatory
₹935
Yes
₹10,592
Yes
1 Nov 2025
22 Sept 2025
3 Oct 2025
22 Sept 2025
29 Sept 2025
22 Sept 2025
stage.html
html • 0.04 MB
tech_eval.pdf
fin_eval.pdf
aoc.pdf
finance_1328714.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .