PROCURMENT OF FURNITURE AGAINST SURVEY OF FURNITURES AT ARMY AREA BANAR AND NAGTALAO UNDER GE BANAR

Amount

Bed hard Plytop (FD-246) Overall size shall be of 1980mm long x 900 mm wide. Height of bed shall be 500 mm on foot rest and 660 mm at head rest .2 Nos of Stiffener size 40*60mm to support plywood bed top. Top of the bed shall be 12 mm thick BWR commercial plywood duly ISI marked. Rest all as shown on drg and as directed by EIC.

Chair Dining (FD-279) All wood shall be first class hard teak wood.Over all size shall be 440mm long in front side and 405 mm in rear side, 430mm wide and 890mm high. All wood shall be teak wood. Front leg shall be 30mm x 55mm in section 460mm high and rear leg shall be 30mm x 55mm in section 890mm.Two side stiffener shall be 20mm x 25mm in section and one middle stiffener 20mm x 25mm.Canning shall be done as per Godrej pattern with 2 mm wide and 0.40 mm thick half round cane.All exposed wooden surface shall be french polished.Rest all as per drg or as directed by EIC.

Chair Easy (FD-229) All wood shall be first class hard teak wood.Over all size shall be 575 mm long 510 mm wide and 740 mm high.Front leg shall be 70mm x 25mm in section 520mm high.Rear leg shall be 70mm x 25mm in section .All wood shall be teak wood. Canning shall be done as per Godrej pattern with 2 mm wide and 0.40 mm thick half round cane.All exposed wooden surface shall be french polished. Rest all as per drg or as directed by EIC.

Chair Table Card (FD-353) Over all size shall be 440mm long in front side and 405 mm in rear side, 430mm wide and 890mm high. All wood shall be teak wood. Canning shall be done as per Godrej pattern with 2 mm wide and 0.40 mm thick half round cane.All exposed wooden surface shall be french polished. Rest all as per drg or as directed by EIC.

Chair WBB (FD-285) Over all size shall be 445mm long in front side and 405 mm in rear side, 440mm wide and 835mm high. All wood shall be teak wood. All exposed wooden surface shall be french polished. Rest all as per drg or as directed by EIC.

Chair Writing (FD-280) Over all size shall be 535mm long in front side and 470 mm in rear side, 470mm wide and 890mm high. All wood shall be teak wood. Canning shall be done as per Godrej pattern with 2 mm wide and 0.40 mm thick half round cane.All exposed wooden surface shall be french polished. Rest all as per drg or as directed by EIC.

Peg Table (FD-384) Overall size shall be 450 mm x 300 mm x 380 mm. All wood work shall be 1st class hard teak wood. Top shall be made of 18 mm thick pre laminated wall nut colour board of exterior grade. 4 mm thick teak wood edging around top shall be provided. All exposed surface of timber shall be polished in wall nut colour with melamine finished. PVC/hard rubber shoe shall be screwed all 04 legs. Rest all as per drg or as directed by EIC.

Sofa Set 4 Seater With Cushion (FD-373) The set shall be consist of single four seat.Legs and arms shall be 70mm x 35 mm in section.Front and side rails shall be 35mm x 100 mm teek wood. 40mm x 40mm wooden bearer shall be provided at the bottom of seat over which 07 numbers 50 mm x 20 mm wooden batten shall be fixed.04 numbers 50mm x 20 mm wooden batten shall be provided at the back of sofa.Foam cushion of 40 density of size 530mm x 500mm x100mm duly upholstered with tepastry cloth as approved by GE not less than 350/- per RM shall be provided.All wood shall be teak wood.All exposed surface shall be french polished. Rest all as per drg or as directed by EIC.

Sofa Set 5 Seater with Cushion (FD-373) The set shall be consist of two single seat and one three seat.Legs and arms shall be 70mm x 35 mm in section.Front and side rails shall be 35mm x 100 mm teak wood. 40mm x 40mm wooden bearer shall be provided at the bottom of seat over which 50 mm x 20 mm wooden batten (21 numbers for three seat and 7 numbers for single seat sofa) shall be fixed.50mm x 20 mm wooden batten (14 numbers for three seat and 4 numbers for single seat sofa) shall be provided at the back of sofa.Foam cushion of 40 density of size 530mm x 500mm x100mm duly upholstered with tepastry cloth as approved by GE not less than 350/- per RM shall be provided.All wood shall be teak wood.All exposed surface shall be french polished. Rest all as per drg or as directed by EIC.

Table Dining 6 Person (FD-273) Over all size shall be 1500mm long 900 mm wide and 760 mm high. Leg shall be 75mm x40mm in section. 5mm x 5mm in dection groove shall be provided at the visible portion of top of legs.8 Nos wooden corners shall be provided to joining legs with top rail even not shown on drg as directed by engineer in charge. All wood shall be teak wood.Top of table shall be 18/19 mm thick exterior grade prelaminated particle board of teak face shade.All exposed surface shall be french polished. Rest all as per drg or as directed by EIC.

Table Dining 1200x900x760mm (FD/MAP-11/03) Over all size shall be 1200mm long 900 mm wide and 760 mm high. Leg shall be 75mm x40mm in section. 5mm x 5mm in dection groove shall be provided at the visible portion of top of legs.8 Nos wooden corners shall be provided to joining legs with top rail even not shown on drg as directed by engineer in charge. All wood shall be teak wood.Top of table shall be 18/19 mm thick exterior grade prelaminated particle board of teak face shade.All exposed surface shall be french polished. Rest all as per drg or as directed by EIC.

Table Card 900x900x760mm (FD-352) Over all size shall be 900 mm long x 900 mm wide x 760 mm high. Legs shall be 55mm x 35mm in section. Top of the table shall be 19 mm thick commercial particle board over which superior quality green baize cloth shall be fixed. All wood shall be teak. All exposed surface shall be french polished. Rest all as per drg or as directed by EIC.

Table Dressing Gents With Mirror (FD-230) Over all size 1650 mm high 600 mm wide and 100 mm deep. Cabinet size shall be 1200 mm x 600 mm x 100mm. Side bottom and top of cabinet shall be made of 18/19 mm thick exterior grade particle board. Back and base of mirror shall be made of 12 mm thick plywood.02 nos legs of size 450mm x 38mm x 38 mm shall be provided including brackets of size 38 mm x 112 mm x 112mm .All exposed surface shall be french polished. Rest all as per drg or as directed by EIC.

Description of Work / Item(s)

Amount

Almirah Large 1/2H x 1/2S (FD-1033) Over all size shall be 920mm long, 485 mm wide and 1985 mm high.two numbers base channel of 100 mm height made of mild steel sheet shall be welded at 50mm from each end of 760 mm length.Steel sheet shall be 1mm thick.Two shelves making three compartments in which bottom two compartments are equally spaced of size 920long x 485mm wide and 350mm high and rest of space is vertically divided into two compartments shall be provided. All exposed steel surface shall be painted witn two coat of light grey coloured enamel paint over a coat of primer. Rest all as shown on drg and as directed by EIC.

Almirah Large Steel (FD-1031) Over all size shall be 920mm long, 485 mm wide and 1985 mm high.two numbers base channel of 100 mm height made of mild steel sheet shall be welded at 50mm from each end of 760 mm length.Steel sheet shall be 1 mm thick.Four shelves equally spaced making five compartments shall be provided. All exposed steel surface shall be painted witn two coat of light grey coloured enamel paint over a coat of primer. Rest all as shown on drg and as directed by EIC.

Almirah Medium/Small Steel With Shelves (FD-1032) Over all size shall be 760mm long, 440 mm wide and 1270 mm high.two numbers base channel of 100 mm height made of mild steel sheet shall be welded at 50mm from each end of 760 mm length.Steel sheet shall be 1 mm thick.Three shelves equally spaced making four compartments shall be provided. All exposed steel surface shall be painted witn two coat of light grey coloured enamel paint over a coat of primer. Rest all as shown on drg and as directed by EIC.

Aluminium Ladder With Loft (FD-1025) Over all size shall be 2310mm long and 300mm wide.Two Aluminium stringer of size 2310mm long 60mm wide with fitted with equally spaced 8nos of aluminium conduit pipe of 23mm dia 300mm long. Rest all as shown on drg and as directed by EIC.

Bench Workshop 1800x900x760mm (FD-1024) Over all size shall be 1800mm long ,900 mm wide and 760mm high. Steel frame shall be made of 1.6 mm thick 32 mm square MS pipe. Size of drawer shall be 900mm wide 450 long mm and 125 mm deep.Top of table shall be 40mm thick 2nd class hard wood with three coats of oil paints. All exposed steel surface shall be painted witn two coat of light grey coloured enamel paint over a coat of primer. Rest all as shown on drg and as directed by EIC.

Book Case Steel (FD-1028) Over all size shall be 840mm long, 310mm wide and 1675mm high. All sheet shall be 20 guage thick mild steel sheet.Book case shall be provided four equally spaced comparments with 3 mm thick glass panes shall be fixed to sliding shutter, which shall move on 1.25 mm thick MS channels and each shutter shall be provided with locking system brass 6 lever with duplicate key of approved quality.Alll exposed steel surface shall be painted with coats of light grey/off white coloured enamel paint except front side of shutter which shall be painted with two coats of blue/brwon colured enamel paint over a coat of primer. Rest all as shown on drg and as directed by EIC.

Chair School With Hand Board (FD/E6/MAP/05) Overall shall be 770mm high, 490mm wide and 460mm deep. Frame shall be made up of 20mm dia 16 guage conduit pipe. Polypropylene co-polymere seat of weight 1.20kg. Hand rest shall be 20mmthick commercial ply finished with plastic laminated teak finish.All exposed steel surface shall be painted witn two coat of black coloured enamel paint over a coat of primer. Rest all as shown on drg and as directed by EIC.

Chair CB Steel With Arms (FD-75(M)) Over all size shall be 535mm wide 560 mm deep and 900 mm high.frame shall be made of 20 mm dia 1.6 mm thick conduit pipe. Seat and back of chair shall be made of wooden frame duly canned with 2 mm wide 0.40 mm thick can. Hand rest shall be 20mm thick commercial ply finished with laminated foam with leatherite.All exposed steel surface shall be painted witn two coat of light grey coloured enamel paint over a coat of primer. Rest all as shown on drg and as directed by EIC.

Chair CB Steel Without Arms (FD-75(M)) Over all size shall be 535mm wide 560 mm deep and 900 mm high.frame shall be made of 20 mm dia 1.6 mm thick conduit pipe. Seat and back of chair shall be made of wooden frame duly canned with 2 mm wide 0.40 mm thick can. All exposed steel surface shall be painted witn two coat of light grey coloured enamel paint over a coat of primer. Rest all as shown on drg and as directed by EIC.

Charpoy GI Pipe Nylon Newar (FD-220) Over all size shall be 1980 mm long x 900 mm wide x 440mm high. Frame and leg shall be made of 32mm dia GI Pipe. Three stiffener made out of flat iron 900x50x5mm duly painted with two coat of black colour synthetic enamel paint of 1st quality over a coat of red oxide primer to be fixed over the long rails of drilling holes in flat iron and long rail by 01 Nos semi circular top bolt of 6mm dia x 75mm long for every stiffener and every side, total 02 Nos for every stiffener.Top shall be made of 12 mm thick BWR grade plywood and 12mmx5mm thick 2nd class Hard Wood half round beading all round the plywood edges duly polished.Three way GI elbow 32mm dia ISI marked as per drg. Rest all as shown on drg and as directed by EIC.

Chair Special With Arms (FD-260) Overall shall be 770mm high, 490mm wide and 460mm deep. Frame shall be made up of 20mm dia 16 guage conduit pipe.Polypropylene co-polymere seat of weight 1.20kg.Hand rest shall be 20mm thick commercial ply finished with plastic laminated teak finish.All exposed steel surface shall be painted witn two coat of black coloured enamel paint over a coat of primer. Rest all as shown on drg and as directed by EIC.

Chair Verandah (FD-256/359) Over all size shall be 460 mm long 600 mm wide and 760 mm high. Legs shall be made of 20 mm dia and 1.6 mm thick mild steel conduit pipe. The horizontal distance between legs at seat level shall be 450 mm and shall be 600 mm at bottom level. Seat and back shall be weaven with 4 mm wide plastic cane. All exposed steel surface shall be painted witn two coat of white coloured enamel paint over a coat of primer. Rest all as per drg and as directed by EIC.

Form With Back1800/1900MM (FD-78(M)) Over all size shall be 1800mm long 510 mm wide and 900mm high. Steel frame shall be made of 1.6 mm thick 25 mm square MS pipe.Wooden seat shall be teak wood in one piece and of size 1800 mm long x 255 mm wide x 25mm thick. Wooden back shall be teak wood in one piece and of size 1800 mm lond x 150 mm wide x 19 mm thick.All exposed steel surface shall be painted witn two coat of light grey coloured enamel paint over a coat of primer. Rest all as per drg and as directed by EIC.

Form With Back 1500MM (FD-77) Over all size shall be 1800mm long 510 mm wide and 900mm high. Steel frame shall be made of 1.6 mm thick 25 mm square MS pipe.Wooden seat shall be teak wood in one piece and of size 1800 mm long x 255 mm wide x 25mm thick. Wooden back shall be teak wood in one piece and of size 1800 mm lond x 150 mm wide x 19 mm thick.All exposed steel surface shall be painted witn two coat of light grey coloured enamel paint over a coat of primer. Rest all as per drg and as directed by EIC.

Rack Letter (FD-1036) Over all size shall be 1670mm long 205 mm wide and 1100mm high made up of thick MS Shee.All exposed steel surface shall be painted witn two coat of light grey coloured enamel paint over a coat of primer. Rest all as per drg and as directed by EIC.

Side Rack Steel With Tray (FD-1023) Over all size shall be 1120mm long, 355mm wide and 810mm high. 04 Nos mild steel angle iron of size 40mm x 40mm x 3mm shall be provided as legs and shall be 810mm high. Top shelf shall have 4 compartments of equally spaced with 50mm high partition and back covered with 20 guage thick MS steel sheet. All exposed steel surface shall be painted with two coat of light grey coloured enamel paint over a coat of primer. Rest all as per drg and as directed by EIC.

Stool Steel (Fd-81) Over all size shall be 305mm wide x 305mm long x 510 mm high.Stool shall be made out of 1 mm thick MS sheet. All exposed steel surface shall be painted witn two coat of light grey coloured enamel paint over a coat of primer. Rest all as per drg and as directed by EIC.

Table Bedside MAP (FD/E6/MAP/15R) Over all size shall be 450mm x 450 mm x 600 mm. Whole body and drawer shall be made of 18/19mm thick exterior grade per laminated particle board. Frame shall be made of 18/19 mm thick exterior grade prelaminated particle board. Frame shall be made of 18mm x 18mm square mild stell 18 guage tube. The drawers shall run on 1.6mm thick telescopic channels. All exposed steel surface shall be painted with black coloured synthetic enamel paint. Rest all as per drg and as directed by EIC.

Table Centre With Glass Top (FD-375) Over all size shall be 1200 mm long x 600mm wide and 400 mm high. 4 Nos legs shall be 40mm dia 16 Guage stainless steel pipe in one piece. Legs shall be joined in long and short side with 02 nos 25mm dia stainless steel pipe of wall thickness of 16 guage. Top pipe shall be fixed at 150mm from the top and lower pipe shall be 100mm from the bottom of top pipe. The stainless steel frame shall be 900mm long and 450mm wide. The bottom of legs shall be covered with 16 guage thick stainless steel sheet and shall have PVC shoes. Top of the table shall be made of 10mm thick white or smoke gray coloured round edges tinted glass rounded in corners. Rest all as per drg and as directed by EIC.

Table Conference (FD-1001) Overall size shall be 1900mm long 835 mm wide and 760mm high.18/19mm MDF board with 1.5mm thick decorative laminate fixed on one side on top.Frame shall be made up of 32*32mm mS tube of 1.6mm thickness. Rest all as per drg and as directed by EIC.

Table 900*900*760MM Steel without drawer (FD-1009) Over all size shall be 900mm long, 900mm wide and 760mm high. Steel frame shall be 800mm x 500mm x 742mm. Legs shall be 25mm square MS Tube 1.6mm thickness. Top shall be 18mm thick MDF board with teak wood edged. Rest all as per drg and as directed by EIC.

Table 3'x2' with drawer (FD-1008) Over all size shall be 900mm long 600 mm wide and 760 mm high. Steel frame shall be 800 mm x 500 mm x 742mm made of 1.6 mm thick 25 mm square mild steel tube.A drawer of size 350mm x 130 mm x 500 mm shall be provided on the left side of the table.Top of table shall be 18/19 mm thick exterior grade prelaminated particle board of teak face shade. All exposed steel surface shall be painted witn two coat of light grey coloured enamel paint over a coat of primer. Rest all as per drg and as directed by EIC.

Table 900*600*760 (FD-1007) Over all size shall be 900mm long, 600mm wide and 760mm high. Steel frame shall be 800mm x 500mm x 742mm. Legs shall be 25mm square MS Tube 1.6mm thickness. Top shall be 18mm thick MDF board with teak wood edged. Rest all as per drg and as directed by EIC.

Table Dining ORS (FD-165(M)) Overall size shall be 1900mm long 685 mm wide and 760mm high.19mm thick block baord with 22 guage aluminium sheet on top.Frame shall be made up of 25x25mm mS tube of 16 guage. Rest all as per drg and as directed by EIC.

Table Cook Aluminium Steel (FD-377) Over all size shall be900 mm long 540 mm wide x 840 mm high.Steel frame shall be made of 1.6 mm thick 25 mm square MS tube of size 850mm x 490 mm x 815mm.10 mm long lug 4 in number shall be welded at the top of the frame to fix the 25 mm thick stone top. Top of the table shall be made of 25mm thick polished kota stone slab duly round edges. All exposed steel surface shall be painted witn two coat of light grey coloured enamel paint over a coat of primer. Rest all as per drg and as directed by EIC.

SK INDUSTRIES

BHARAT BUILDERS

BHARAT BUILDERS

SK INDUSTRIES