PROVIDING AND FIXING G.I. CHAINLINK FENCING, M.S. GRILL, BARBED WIRE FENCING AND CONCERTINA COIL FENCING WORK & G.I. SHEET BARRICADING WORK AND MS FABRICATION WORK IN DEFFERENT RESERVATION PLOT & MUN.PROPERTY AT SARTHANA, SIMADA, VALAK, PASODARA & BHADAA

Name of Work :- Providing and fixing G.I. Chainlink fencing, M.S. Grill, Barbed wire fencing and Concertina coil

fencing work & G.I. Sheet Barricading Work and MS Fabrication Work in Defferent Reservation Plot & Mun.Property

at Sarthana, Simada, Valak, Pasodara & Bhada Area in New East Zone (Sarthana).

S.O.R. 2024-25 (Without GST)

ITEM Qty UNIT RATE AMOUNT (Rs.)

1 Demolition including stacking of serviceable materials with all

(i) RCC work 50.00 C.M 1110.75

2 Demolition of brick work and stone masonry including stacking of serviceable

materials and disposal of unserviceable materials with all lead and lift. (i) On

(II) in Cement mortar. 50.00 CM 577.92

3 Boring holes 3.5 mt.deep in ordinary soil ( for cast in situ piles) & disposal of

the surplus excavated soil as directed within a lead of 50 M. For

following diameter of piles.

Excavation for foundation includ.sorting out & stacking of useful materials &

disposing of the excavated stuff upto 50 mt. Lead & all lift, watering etc.

Executed With Manual Labours

(A) loose and doft soil

(II) 0.0 to 1.5 mt depth. 100.00 CM 212.52

Providing & laying cement concrete 1:2:4 (1 cement:2 sand:4 graded stone

agg. 20 mm nominal size)& curing comp. Includ.cost of form work but exclu.

Cost of reinforcement for reinforced concrete work in : (A) Foundation,

footing, Base of columns

6 Brick work using common burnt clay building bricks having crushing strength

not less than 35 kg./Sq.Cm. in foundation and plinth in Cement Mortar 1:6 (1-

Cement : 6 -fine sand)(C) Fly Ash Bricks

Up to plinth 50.00 CM 4441.11

7 20mm thick sand faced cement plaster on walls upto height 10 metres above

ground level consisting of 12mm thick backing coat of C.M. 1:3 (1-cement : 3-

sand) and 8mm thick finishing coat of C.M. 1:1 (1-cement : 1- sand) etc.

(A) For wall and similar surfaces 500.00 SM 347.42

8 Steel work welded in built up sections, framed work including cutting,

hoisting, fixing in position and applying a priming coat of red lead paint

(A) in beams & joists channels angles, tees, flats with connection plates

or angle cleats as in main & cross beams,hip & trussed purlins connected 300.00 Qtl 9108.48

to common raffers & the like.

Providing and fixing G.I. chain link of 50mm x 50mm size x 10 guage thick

with nuts, bolts, washer or G.I. pins, excluding M.S. angles etc.complete as per

relevent IS specification & directed by engineer in charge. (TATA or Jindal

Providing and fixing and fitting TATA or Jindal make G.I. barbed wire fencing

with necessary barbed wire (12 x 14 guage, weight not less than 0.14 kg. /

mt.) pins, hooks, excluding M.S. angles etc. complete as per relevent IS

specification.& directed by engineer in charge

11 Providing & fixing M.S.Grills of required pattern to wooden frames of

windows etc. At all floor levels with M.S. flats at required spacing &

frame around square or round bars with round headed bolts & round headed

bolts and nuts or by screws incl. Priming coat of Red lead paint etc. comp.

(A) Plain grill For all Floors 1000.00 Kg. 109.41

12 Providing and Fixing Hollow steel Sections Framed Work including

Cutting, Hoisting, Welding & Fixing in position Purlin, Main Chord etc. as per

Engineer- in-charge.TATA / JINDAL / ASIAN Make

Painting two coat (excluding priming coat) on new steel and other metal

surface with synthetic enemal paint, burshing to give an even shade

including cleaning the surface of all dirt, dust and other foreign matters.

ITEM Qty UNIT RATE AMOUNT (Rs.)

Providing and Fixing hot dip concertina coil of 610 mm dia. made out of

mm (12 SWG) hot dip galvanized (G.I. coating not less than 200 gm/sqmt.) th.

wire having 80 nos. of spikes and 200 nos. of clips made out of stainless steel

(AISI 304) 1.5 mm th. dia., G.I. strips 0.5 mm th. ( G.I. coating not less than

14 gm/sq.mt.) weight of one coil should not be lesss than 15 kg. etc., complete at 2500.00 RM 231.00

the top of compound wall fixed with S.S. clips and binding wires whereever

necessary etc. complete. ( NOTE: Strctching length of one coil should not be

more than 9 mt.)

Providing corrugated G.I. Sheets of class-3 roofing fixed with glavanished iron

J or L Hooks, Bolts and nuts 8m diameter with bitumen and G.I. limpet washer

or G.I. limpet washer. filled with white lead complete excluding the cost

of purlins, Rafters and Trusses. (Tata / Jindal or

(ii) 0.63mm Thick Sheet 1000.00 SM 1016.00

Providing & fixing colouron galvaniced steel, zinc / aluminium allus coated

sheet 0.5 mm. thick roofing fixed with gslvanised grom J or L hook bolts and

16 bolt 8mm dia with bituman and impet washer filled with white lead etc. 100.00 SM 999.00

Excluding the cost of purlins rafter and trusses. (Tata / Jindal or equivalent)

Providing & fixing 150mm wide 450mm over all semicircular plain

G.I. sheet class-3 gutter with iron brackets 40mm x 3mm size bolts,

nuts, washers etc. including marking necessary connection with rain water

pipes. (i) 0.8 mm thick

Providing ridges or hips 600mm over all in plain G.I. sheet fixed with G.I.

18 "J" of "L" hooks bolts and nuts 8mm dia G.I. limpet and bitumen washer 200.00 RM 641.94

complete (1) 0.80 mm thick

EXECUTIVE ENGINEER

NEW EAST (SARTHANA) ZONE

SIGNATURE OF CONTRACTOR SURAT MUNICIPAL CORPORATION