Loading
Loading…
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Tender Value
₹2.5 L
EMD Value
₹75,000
Closing Date
16 Feb 2026, 12:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Managing Director
Civil construction work for an underground RCC water tank (210KL) along with plumbing works for the staff quarters at Dudhdhara Dairy, Bharuch.
272133
2025-26
Open
Civil - All
Works
Bharuch
1 document required · 1 mandatory
₹1,770
Yes
The Bharuch District Co-Operative Milk producers` Union Ltd
₹75,000
Yes
3 Feb 2026
3 Feb 2026
3 Feb 2026
16 Feb 2026
3 Feb 2026
SPECIAL NOTE: FIRM/ COMPANY NEEDS TO SUBMIT THE DETAILS AS PER ABSTRACT SHEET AFTER ALLOTMENT OF TENDER CURRENTLY FIRM/ COMPANY NEED TO SUBMIT TOTAL AMOUNT OF THE WORK IN SCHEDULE B/ COMMERCIAL BID / PRICE BID ONLINE
Client : DUDHDHARA DAIRY, BHARUCH
Name of Work : Civil Work for Proposed UGWT
Consultant: AR STRUCTURALS, Bharuch
Item no. Item BOQ Qty Unit Rate amount
SECTION 'A' : EARTHWORK AND BACK FILLING
a. Excavation rate includes removal of all kind of vegetation, small shrubs, Earthing Pits, etc.
b. Dewatering from pits and excavations to be let out of the building area through proper pipes & channels.
c. Excavation dimension shall be as per PCC dimension only
1 Excavation in all types of soil viz., sand, clay, gravel, Clayton, mud, slush other than rock for foundation of walls, columns, cable trenches, equipment foundation, etc. as per the Drawing, including removing of all vegetations, bushes, roots, etc, shorting, disposing off surplus materials (after utilization in back filling selected earth) including shoring, Shuttering, dewatering where required (until foundation work is complete). with in plot. as directed by the engineer-in-charge, leveling, dressing, and compaction of the disposed earth, etc complete.
Up to 1.50 mtr. Depth Cu.M. 142
From 1.50 mtr. to 3.00 mtr. Depth Cu.M. 142
From 3.00 mtr. to 4.50 mtr. Depth Cu.M. 105
2 Back Filling in Foundation and plinth with approved materials in layers of 150 mm thickness, consolidating each layer by ramming and watering and rolling with vibro roller for a compaction to the modified proctor density of 95 percent of approved borrow pit. (Minimum 1.60 gms / Cu.cm.)
Selected earth obtained from excavation vide item no. 1 Cu.M. 85
3 Providing and laying close graded Granular sub base (GSB), conforming to 25% CBR conforming to grading-2 of table 400-1 of MoSRTH specification laid in layers not exceeding 150 mm thick compacted to 125mm, 2 layers, spreading to level gradient and camber using motor grader, rolling at Optimum Moisture Content using vibratory power roller of 8 - 10 Ton operational weight to acheive not less than 98% proctor density (IS2720 Part-8). including all material, labour, machinery with all leads & lifts etc. complete. all as laid down in Clause 401 of MORTH etc complete as directed by Engineer in charge. Cu.M. 25
Total of Section - 'A'
SECTION 'B' : P.C.C. / R.C.C. WORK :
1 Providing, mixing and laying plain cement concrete with 40 mm nominal size graded aggregates of approved quality as a leveling course under the column foundation, wall foundation, cable trenches, other trenches, machinery foundations, raft foundations, pipe supports, plinth beam, as floor sub base, Drain etc. including ramming, leveling, curing etc. complete at any level Please consider the cost of form work if required any.
MIX 1:4:8 Cu.M. 9
2 Providing, mixing, Batching and laying Reinforced cement concrete M:25 with 20 mm and downsized aggregate in all type of works such as foundation and superstructures, footings, pile caps, raft beams, columns, runners, coping beam, walls, slabs, lintels, tie-beams, canopies, staircase, fins, ledge, ugwt, drain etc. including vibrating, tamping, curing, complete as per the drawing and specification including the cost of plywood form work including necessary centering for alignment and levels for columns, blocks, pedestals, lintels, beams (regular and inverted), slabs, chajjas, copings, gutters, pardi, facias, fins, bands, walls, staircases, slopping RCC elements, rain water chutes, etc. of rectangular, square shapes, curve, including strutting, shoring, bracing, propping, staging, water retaining structure / any type of structure member, etc. keeping the same in position during the concreting and removal of the same after a specified period, etc. complete as per drawings and specifications. The framework shall ensure smooth finish surface without any additional rendering. Rate to include coating formwork with approved quality of non-staining mineral oil.
FOR ALL LEVELS Cu.M. 85
3 Fabricating & fixing in position Reinforcement Steel for RCC work with Thermo mechanically Treated (TMT) bar of various diameters and grade of steel as specified below conforming to IS specification including straighting, cutting, , bending, hoisting, fabricating and placing in position at all heights & levels according to drawings including preparation of bar bending schedules and obtaining their approval from consultant and binding the reinforcement with GI annealed binding wire in two strands of 18 gauge and providing PVC / cement mortar cover blocks for placing the reinforcements in position and for maintaining the cover specified and/or according to relevant IS. Note : Reinforcement shall be measured only in lengths of bars as actually placed in position on standard weight basis, no allowance being made in the weight for rolling margin, chairs of any shape & profile, spacer bar of any shape & profile. Cover block, wastages and binding wire shall be included in the quoted rate and to include lead, lift, placing at all levels and as per the approved bar bending schedule etc all complete.
TMT Bars M.T. 8
4 Providing, fixing and stripping off plywood shuttering of 12mm thk plywood having film faced desnsified shuttering for the RCC works including the cost of centering and staging finishing of concrete surface and removing of form work as per the specifications etc., complete all as per drawings, specifications and as directed. The form work shall ensure smooth finish surface without any additional rendering. Rate to include coating formwork with approved quality of non-staining mineral oil. SQM 410
Total of Section - `B'
SECTION 'C' : FLOORING ITEMS
Providing and laying vitrified tiles of approved make / shed thick set in 1:4 cement mortar in line, level, plumb and slope including curing, cleaning, etc. complete as per manufacturer’s specifications.(Basic Rate Rs. 550/-per Sq.M)
a) For flooring over 12mm thick cement mortar bedding. Size 600mm x 600mm SQM 60
b) For wall over 12mm thick backing coat, upto slab lvl.. SQM 175
Total of Section - `C'
SECTION 'D' : PLASTERING
1 Providing and laying cement plaster to all surfaces of masonry, and R.C.C. in C.M. 1:4 finished smooth with cement punning including scaffolding, racking of joints, racking of RCC surface, curing, etc. complete including providing and fixing G.I. chicken wire mesh of 150mm overlap either side of joint of the junction of R.C.C. / P.C.C. and masonry, Bonding chemical etc as directed by Engineer-in-Charge. (For cement punning, the proportion of lime and cement shall be 1:10). The item is inclusive of grooves up to 12 x 12mm, drip moulds (50 mm wide x 12 mm thick), bands of any width etc. complete.
8-10mm thick on Ceiling Sq.M. 70
2 Providing and applying 20 mm thick. Double coat external sand faced water proof plaster(using river sand only) in 2 coats over masonry surfaces, concrete surfaces, etc. First coat 12 mm thick in C.M. 1:4 & second coat 8 mm thick in C.M. 1:3 at all heights including scaffolding, racking of concrete / masonry surfaces, curing, etc. complete including providing and fixing G.I. chicken wire mesh of 150mm overlap either side of joint of the junction of R.C.C. / P.C.C. and masonry, Bonding chemical as directed by Engineer-in-Charge. The item is inclusive of grooves up to 12 x 12mm, drip moulds (50x12 mm), bands of any width etc. complete. The plaster should be dabbed with a sponge pad to gice a uniform finish etc. Sq.M. 165
Total of Section - D'
SECTION 'E' : PAINTING
1 Providing and applying Bitumineous damp proof paint (Black Japan)of approved maketo the outside RCC wall surface in two coats. Including preparation of the surface like holes,dents and cracks to be filled only by using mixture of cement and fine sand(in the ratio 1:3), scaffolding , curing, cleaning at all levels and locations etc. complete.The dry/wet cleaning of floors/pipes/glass etc. after painting is to be carried out, protection of surfaces before painting is included in the item. Sq.M. 165
Total of Section - E'
SECTION 'F' : MANHOLE & RUNGS
1 Providing, supplying, Fixing and grouting Heavy duty 600 x 600 x 100mm Double Seal Cast Iron Cover (App. Weight with frame will be 50 Kgs). nos 2
2 The supply and installation of Cast Iron (C.I.) rungs for an Underground Water Tank involves providing heavy-duty grey cast iron steps (conforming to IS 5455) that are pre-coated with a corrosion-resistant bituminous paint, must be securely embedded into the tank walls at staggered intervals of 300mm center-to-center and grouted with concrete mix to ensure they can safely support. The installation is finalized to maintain the tank's structural integrity and prevent leaks. nos 26
Total of Section - F
SECTION 'G' : WATER SUPPLY
1 Supply, installation, testing, and commissioning of a 3 HP submersible pump set of approved make (such as Kirloskar or CRI), featuring a corrosion-resistant body and high-efficiency motor. The scope includes providing ISI-marked 3-core flat submersible cabling, heavy-duty uPVC column pipes, and a fully automatic control panel equipped with dry-run and overload protection. The system must integrate a Water Level Controller with an overflow indicator/alarm, complete with all necessary sensors, safety wire ropes, and plumbing attachments to ensure a fully automated and functional water supply system. NOS 1
2 Providing ,fixing & testing pipes for water supply of U- PVC for following diameters at all levels, including with all necessary fixtures like bends , elbow etc. Quoted rate shall be inclusive of excavation and refilling the trenches / cutting floors & wall / making hole in RCC/ Brick work / making groove/ clamping finishing, jointing & sealing the same with sealant , making good after work etc. including hydro test complete as directed by engineer in charge. (Astral, Finolax make)
50 mm dia nominal bore R.M. 100
75 mm dia. nominal bore. R.M. 3
Total of Section - G
SECTION 'H' : MICSLLENEOUS
1 Breaking of R.C.C. or P.C.C. at any level including cutting of existing reinforcement bars, shifting of debris from factory premises to outside as directed by Engineer-in-Charge. Cu.M. QRO
2 Providing, drilling & fixing anchor bars in concrete using Hilti HY-150 chemical grout as per as per manufacturer's specifications.
8mm Bars No QRO
10mm Bars No QRO
12mm Bars No QRO
16mm Bars No QRO
3 Supply of Manpower including tools & Tackles as required by EIC
Skilled Manpower Day QRO
Unskilled Manpower Day QRO
4 Supply of Machinery as required including operator, fuel etc
Supply of JCB Hr QRO
Supply of Tractor Hr QRO
Total of Section - H
AR STRUCTURALS. Bharuch
Client Name : NISHAL GASES, DAHEJ
Name of Work : PARKING SHED (23X16.7)
Bill of Quantity
Item No. Description Unit No L B D Qty Total Qty
Section 'A' : Earthwork :
1(A) Excavation in all types of Soil
(a) Up to 1.50 mtr. Depth Cu.M.
FOR PILE CAP 11
(b) From 1.50 mtr. to 3.00 mtr. Depth Cu.M.
( c ) From 3.00 mtr. to 4.5.00 mtr. Depth
(e) From 1.50 mtr. to 3.00 mtr. Depth Soft Rock Cu.M. QRO
(d) From 1.50 mtr. to 3.00 mtr. Depth Hard Rock Cu.M. QRO
2 Backfilling in foundation with approved materials 0
(a) Selected earth obtained from excavation vide item no. 1 Cu.M.
From Excavation
(b) Approved Good quality Earth brought from Outside Cu.M.
Up to 1.50 mtr. Depth
From 1.50 mtr. to 3.00 mtr. Depth
(c) Sand (2.6 to 2.8 F.M.) brought from Outside Cu.M.
Less for Bullet
3 Filling in plinth with approved material
(a) Selected earth obtained from excavation vide item no. 1 Cu.M.
(b) Approved Good quality Earth brought from Outside Cu.M. 1
(c) Sand (2.6 to 2.8 F.M.) brought from Outside Cu.M.
4 Dry Stone Metal Soling - 230 mm thk. Cu.M.
5 Antitermite Treatment. Sq.M. 1
6 Surface Cutting Sq.M.
13 Under Reamed pile single bulb
(a) 350 mm Dia 5.0 Mt depth from NGL Rmt 36
Total of Section - 'A'
Section 'B' : P.C.C. / R.C.C. Work :
1 P.C.C. in Foundation and Floor
Boiler Foundation 1 10
2 R.C.C M30 for Piles with Tremie
(a) 350 mm Dia 6.0 mtr Depth Rmt 36 5.5
3 R.C.C. M:25 by batching Plant
(a) For Foundation and up to Plinth lvl. Cu.M.
For Columns 4 0.000 2
For Columns 4 0.000 2
Bolier Foundations 1 20
(b) For Superstructure up to 5.00 mtr. Cu.M.
(c) - Do - but from 5.00 to 10.00 mtr. Height
4 Reinforcement 0
(a) Mild Steel Bars. M.T. QRO
(b) High Strength Deformed Bars. M.T. QRO
(c) TMT Bars M.T.
For Foundation and up to Plinth lvl. Cu.M.
For Superstructure 0.00 to 5.0 Mtr. Cu.M.
- Do - but from 3.75 to 7.50 mtr. Height Cu.M.
- Do - but from 7.50 to 11.25 mtr. Height Cu.M.
- Do - but from 11.25 to 15.00 mtr. Height Cu.M.
5 Form work / Shuttering
(a) For Foundation and up to Plinth lvl. Sq.m
For Columns 4 2
For Columns 4 2
For Columns 2 0.999 2
For Floor 1 0.15
For Steps 1 0.15
Bolier Foundations 1 100
(b) -Do- upto 5.00 Mtr Ht
(c ) - Do - but from 5.00 to 10.00 mtr Ht
6 Precast Reinforced Cement Slab - R.C.C. M:25 Cu.M.
7 Water Proofing admixture in Liquid form. Ltr.
7 Free Flow Non-Shrink Grout. (FOSROC GP-2) Cu.M.
Columns 6 0.000 0.05
Foundations 0.000
8 25mm thick Premoulded compressible foam for expansion joint filler. Sq.M.
9 Expansion Joint filler. Rmt.
10 Expansion Joint Cover. Rmt.
11 Staging for Direct Ht Cu.M.
Total of Section - `B'
Section 'C' : Masonary Work :
1 Brick Masonary C.M. 1:6 for fdn. and plinth Cu.M.
On Plinth Beams upto Floor Level 1
2 Brick mansonary in C.M. 1:6 0
(a) Up to 5.00 mtr. Height Cu.M.
(b) -Do- upto 5.00 Mtr Ht Cu.M.
( c) - Do - but from 5.00 to 10.00 mtr Ht
( d) - Do - but from 11.25 to 15.00 mtr. Height
3 Brick Partition Wall - 115mm thk. Sq.M.
4 Extra over item no 1 & 2 for masonry in 1:4 Cement mortar instead of 1:6 Cu.M. QRO
Total of Section - `C'
Section 'D' : Structural Steel Work :
1 Hot Rolled Steel Structure
(i) Fully Welded Structure M.T. 1 60
(ii) Erection incl. Alignment M.T.
(iii) Applying First Coat Oil Paint M.T.
(iv) Applying Second Coat Oil Paint M.T.
2 RHS / SHS - TISCO Tube Structure 0
(i) Fully Welded Structure M.T. QRO
(ii) Erection incl. Alignment M.T.
(iii) Applying First Coat Oil Paint M.T.
(iv) Applying Second Coat Oil Paint M.T.
3 Sag Roads KG 1.2 0.89
4 Foundation Bolts KG 1.2 0.000
5 Cold Rolled Steel Structure M.T.
Total of Section - `D'
Section 'E' : Roofing, Cladding, etc.
1 0.65 mm. thk. Galvalume Color coated plain sheets for accessories
(a) Below 150mm size R.M.
(b) 150mm to 250mm size R.M.
(c) 250mm to 650mm size R.M. 3
(f) North Light Curve R.M.
(g) Apron Piece R.M.
2 0.47mm thk. Bare Galvalume Sheets for roofing Sq.M.
3 0.47mm thk. Galvalume Color Coated Sheets Cladding Sq.M.
North & South Side
Vertical Sides 2 5.5
4 4mm Thk Aluminium Foil Insulation Sq.M.
5 Armstrong Acoustical Mineral Fiber False Ceiling-1210 x 610 Sq.M.
6 - Do - but for 610 x 610mm - Bottom Laminated Sq.M.
7 - Do - but for 610 x 610mm - Both Side Laminated Sq.M.
8 G.I. Rain Water Gutter Sq.M. 2 1
9 Rain Water Down Take pipe (P.V.C.)
(a) 90mm. Dia. R.M.
(b) 110mm. Dia. R.M. 2
(c) 125mm. Dia. R.M.
(d) 160mm. Dia. R.M.
(e) 180mm. Dia. R.M.
10 Streamline ridge Ventilators
(a) SRV - 600 R.M.
11 P & F Translucent Roof light sheets 2mm thick plycarbonate corugated Sq.M.
12 Air vent turbine - VERGOLA Ventilator
(a) Model - AV 600 No. 4
Total of Section - 'E'
Section 'F' : Doors / Windows / Ventilators
1 Box type Door Frame 125mm x 60mm - Pressed Steel Sheets R.M.
2 Fully Glazed Aluminum Door Kgs.
3 35mm thick laminated flush door shutter Sq.M.
4 Aluminum Anodised frame Window.
(a) Fully Glazed Fixed type. Kgs.
(b) - Do - but sliding type 50% opening. Kgs.
(c) Fully glazed Fixed type but fixed glass strips louvers Kgs.
(d) Fully glazed Fixed type but Adjustable glass strips louvers Kgs.
(e) Openable type shutters Kgs.
5 Supplying, providing and fixing of Float glass
(a) 4mm thick Sq.M.
(b) 5.5 to 6mm thick Sq.M.
(c) 8mm thick Sq.M.
(d) 10mm thick Sq.M.
(e) 12mm thick Sq.M.
6 Extra over Item No. 5 for Toughening of Glass.
(a) 4mm thick Sq.M.
(b) 5.5 to 6mm thick Sq.M.
(c) 8mm thick Sq.M.
(d) 10mm thick Sq.M.
(e) 12mm thick Sq.M.
7 Extra over Item No. 5 for Frosting of Glass of any thick Sq.M.
8 Extra over Item No. 2, 4 and 11 for
(a) Extra for Powder Coating Kgs.
(b) Extra for Color Anodizing. Kgs.
9 Hydraulic Door Closer No.
10 Plastic section Doors of Syntex Sq.M.
11 Aluminum Frame Door partially galzed and partially laminated board panel Kgs.
12 Supplying, providing and fixing 10mm thick laminated board. Sq.M.
13 Rolling Shutter - 18 gauge thickness
(a) - Do - with gear arrangement. Sq.M.
(b) - Do - without gear arrangement. Sq.M.
(c) - Do - but with 100% Grill type with gear arrangement. Sq.M.
(d) - Do - but with 100% Grill type without gear arrangement. Sq.M.
(e) - Do - but with 25% of the area to be Grill type with gear arrangement Sq.M.
14 Extra for providing motorized system to
(a) Sliding Door No.
(b) Rolling Shutter No.
15 Aluminium Windows with Double Glass (Domal-40 series) Sq.M.
16 Providing and fixing Acoustics Partitions Sq.M.
17 Fire Proof Door Sq.M.
Total of Section - 'F'
Section 'G' : Plastering
1 20 mm thk. water proof cement plaster. Sq.M.
2 12 mm thk. Cement Plaster to all surface 0
(a) 12mm thk Cement Plaster upto Plinth
(b) From plinth to 5.00 mtr. Height Sq.M.
For Boiler Foudation 50
(b) From 5.0 mtr. to 10.0 mtr. Height Sq.M.
Between Boiler & Workshop
3 Double coat Sand Faced Plaster Sq.M.
4 6mm thk. Cement Plaster over all R.C.C. Work Sq.M.
5 Extra over Item no 2 for provide (over uncourse / Random rubble masonry) additional plaster thickness of 13mm Sq.M.
6 Extra over Item no 3 for provide (over uncourse / Random rubble masonry) additional plaster thickness of 13mm Sq.M.
Total of Section - 'G'
Section 'H' : Painting
1 Cement Paint Sq.M.
2 Acrylic Distemper Sq.M.
3 Oil bound distemper Sq.M.
4 Weather seal coat exterior quality paint Sq.M.
5 Texturised matt finished paint Sq.M.
6 Acrylic emulsion (Matt & glossy) Paint Sq.M.
7 lime white wash Sq.M.
Total of Section - 'H'
Section 'I' : Flooring / Skirting / Dado
1 Providing and Laying Granolithic Floor
(a) 40mm thick. Granolithic floor. (With out vacuum dewatering ) Sq.M.
(b) 50mm thick. Granolithic floor. (With out vacuum dewatering) Sq.M.
(c) 75mm thick. Granolithic floor. (With vacuum dewatering) Sq.M.
(d) 100mm thick. Granolithic floor. (With vacuum dewatering) Sq.M.
(e) 125mm thick. Granolithic floor. (With vacuum dewatering) Sq.M.
(f) 150mm thick. Granolithic floor (With vacuum dewatering) Sq.M. 1
2 Non Metallic floor Hardner Kgs. 1 5
3 Ashford Formula Floor treatment Sq.M.
4 Polyproplylene fibrous reinforcement Kgs.
5 Expansion Joints in the Floor R.M. 1
6 Reinforcement Bars for Flooring
(a) Mild Steel Bars M.T.
(b) H.Y.S.D. Bars (T.M.T. Tor Steel) M.T.
(c) 3.175mm (10 gauge) 50mm x 50mm weld mesh M.T.
(d) Prefabricated cold rolled welded wire fabric M.T.
7 Isolation Joints R.M.
8 White Glazed Ceramic Tiles - 6mm thk.
(a) In Floors Sq.M.
(b) In Dado Sq.M.
9 Extra for Colored Ceramic Tiles
(a) In Floors Sq.M.
(b) In Dado Sq.M.
10 Extra for Matt finish Colored tiles
(a) In Floors Sq.M.
(b) In Dado Sq.M.
11 Polished Kota Stone Flooring - 30 to 40mm thk. Sq.M.
12 Polished Kotah Stone Flooring - 25 to 30mm thk. Sq.M.
13 Polished Kota Stone 100mm high Skirting fixing by Mortar R.M.
(a) Polished Kota Stone 100mm high Skirting fixing by Adhesiv R.M.
14 P.V.C. Vinyl Flooring - 3 mm thk. Anti static Sq.M.
15 Marble Flooring
(a) Makrana white marble. Sq.M.
(b) For Udaipur / Kesariaji green marble. Sq.M.
(c) Makrana white marble Skirting R.M.
(d) For Udaipur / Kesariaji green marble Skirting R.M.
16 20mm thick Acid resistance tiles Sq.M.
17 False Flooring Sq.M.
18 250 micron PVC Sheet Sq.M.
19 Minimum 10mm thick Vetrified Tiles in floor with 100mm Skirting Sq.M.
20 Polish Kota stone for Staircase and Window Sill Sq.M.
21 Marble for Staircase and Window Sill Sq.M.
22 Stone Cladding
(a) Nimbaheda Rough Stone Sq.M.
(b) 8 to 10mm thick Polish Granite Sq.M.
(c) Red Agra Stone Sq.M.
23 2 mm thk.Self leveling Epoxy Coating Sq.M.
Total of Section - 'I'
Sectiom 'J' : Miscellaneous Items
1 P.C.C. Fillet
(a) 100 x 100mm size R.M.
(b) 150 x 150mm size R.M.
2 100mm thk. Partition with Double Gyp. Board on each face. Sq.M.
3 G.I. Expanded Chain link Jali Sq.M.
4 DORMA Door Sq.M.
5 Breaking of R.C.C. at all levels Cu.M.
6 Breaking of Brickwork and shifting of debris at all levels Cu.M.
7 100mm thk. Partition with Single Gyp. Board on each face. Sq.M.
8 Making & Finishing Openings of any size Sq.M.
9 Making corner fillet 25 x 25mm size in Epoxy modified polymer mortar. R.M.
10 Fixing 450mm dia. Exhaust fan No.
11 Fixing 300mm dia. Exhaust fan. No.
12 Fixing 250mm dia. Exhaust fan. No.
13 India Type waterproofing Sq.M.
14 Red Agra Stone Paving. Sq.M.
15 P & E Structural glazing Sq.M.
16 1800 mm high Barbed Wire Fencing R.M. 1
17 Dumbble Type PVC Water Stopper R.M.
18 Providing and Fixing Aluminum Composite Panel
(a) Total thickness 2.0mm Sq.M.
(b) Total thickness 4.0mm Sq.M.
19 75mm thick Precast M30 Grade Concrete Paver Block Sq.M.
20 Aluminum Nosing angle Kg
21 3mm thick APP & SBS Polymeric Water Proofing Membbrane Sq.M.
22 G.I. "B'' Class Pipe Nozzle with Puddle Flange
(a) 150mm dia x 1000mm Long. No
(b) 200mm dia x 1000mm Long. No
(c) 300mm dia x 1000mm Long. No
23 G.I.Pre painted Sheets Partition Sq.M.
24 2mm thick Polythene or Tarpaulin sheet curtain wall Sq.M.
25 Perforated Pipe P.V.C. 225mm dia R.M.
26 Pebble Filling as Filter media for Rain Harvesting
(a) 40mm to 65mm Cu.M.
(b) 20mm to 30mm Cu.M.
27 Existing Structure Roof sheet & Wall sheet Removing & Staking Sq.M.
28 Existing Steel Structure Member Remove & Stacking M.T
29 Providing and fixing Rebaring
(a) 8mm Bars No
(b) 10mm Bars No
(c) 12mm Bars No
(d) 16mm Bars No
30 Providing and fixing Anchor Fastner
(a) 10mm Bars No
(b) 12mm Bars No
(c) 16mm Bars No
(d) 20mm Bars No
32 Modular merino toilet partition Sq.M.
Total of Section - 'J'
Section 'K' : Sanitary Installation, Water Supply & Drainage
1 White China Water Closet (India type) No.
2 White China Water Closet (Orissa type) No. 4
3 White China Water Closet Universal (Anglo Indian) Type No.
4 White China Water Closet European Floor mounting type. No. 1
5 White China Water Closet European wall Hung type. No.
6 Extra for Colured Wall hung European W.C. No.
7 Wash Basin No. 3
8 Stainless Steel Sink No.
9 Wall Mixer No.
10 Shower rose with Arm No.
11 Wash Basin Mixer Center Hole No.
12 Senso Urinal No.
13 Flat Back Large Urinal
a Single urinal No. 4
b Two urinal Set No.
c Three Urinal Set No.
14 Marble Partition 1200 x 650 No.
a In Bathroom (Cat.no.107) No.
b In Hand Wash area Sensor Taps (Cat no. 51011) No.
c In W.C. (Cat.no.039) No. 5
16 Toilet Paper Holder No.
17 Mirror No. 3
18 C.P.Brass Towel Rail No.
19 Liquid Soap Container No.
20 P/F PVC Soil, waste and vent Pipe
(a) 150 mm Dia. PVC Soil Pipe. R.M.
(b) 100 mm Dia. PVC Iron Soil Pipe. R.M.
(c) 75 mm Dia. PVC Pipe. R.M.
21 PVC Floor Trap 100 mm INLET & 100mm dia. OUTLET No. 5
22 P.C.C. 1:2:4 around Pipe
(a) 150 mm Dia. PVC Pipe. R.M.
(b) 100 mm Dia. PVC Pipe. R.M.
(c) 75 mm Dia. PVC Soil Pipe. R.M.
23 Painting of G. I. Pipes with 2 coats of bitumastic paint
(a) 15 mm dia nominal bore. R.M.
(b) 20 mm dia nominal bore. R.M.
(c) 25 mm dia nominal bore. R.M.
(d) 40 mm dia nominal bore R.M.
(e) 50 mm dia nominal bore R.M.
(f) 75 mm dia. nominal bore. R.M.
(g) 100 mm dia. nominal bore. R.M.
24 P/F of UPVC Pipes including all fittings
(a) 15 mm dia. Nominal Bore R.M.
(b) 20 mm dia. Nominal Bore R.M.
(c) 25 mm dia. Nominal Bore R.M.
(d) 40 mm dia. Nominal Bore R.M.
(e) 50 mm dia. Nominal Bore R.M.
(f) 75 mm dia. Nominal Bore R.M.
(g) 100 mm dia. Nominal Bore R.M.
25 P/F Brass Full Way Valve with wheel tested on 20 kg/sqm
(a) 15 mm dia. Nominal Bore No. 3
(b) 20 mm dia. Nominal Bore No.
(c) 25 mm dia. Nominal Bore No. 3
(d) 40 mm dia. Nominal Bore No.
(e) 50 mm dia. Nominal Bore No. 3
(f) 75 mm dia. Nominal Bore No.
(g) 100 mm dia. Nominal Bore No.
26 Sintex Water Tank
(a) 500 ltr. Capacity Tank No.
(b) 1000 ltr. Capacity Tank No. 2
0 (c) 2000 ltr. Capacity Tank No.
(d) 5000 ltr. Capacity Tank No.
27 Stoneware pipe 1.50 mtr. Deep
(a) 150 mm dia. S.W. pipe R.M.
(b) 230 mm dia. S.W. pipe R.M.
(c) 300 mm dia. S.W. pipe R.M.
28 - Do - but below 1.50 mtr. To 3.00 mtr. Depth
(a) 150 mm dia. S.W. pipe R.M.
(b) 230 mm dia. S.W. pipe R.M.
(c) 300 mm dia. S.W. pipe R.M.
29 PVC Pipes of 6 Kg. / Sq.M. - 1.50 mtr. Deep
(a) 160 mm dia. P.V.C. pipe R.M.
(b) 225 mm dia. P.V.C. pipe R.M.
(c) 315mm dia P.V.C. Pipe R.M.
30 PVC Pipes of 6 Kg. / Sq.M. - 1.5 mtr. To 3.00 mtr. Depth
(a) 160 mm dia. P.V.C. pipe R.M.
(b) 225 mm dia. P.V.C. pipe R.M.
(c) 315mm dia P.V.C. Pipe R.M.
31 Stone ware Gully trap No. 5
32 Manhole Chamber up to 1.50 mtr. Depth No. 5
33 Extra over above Item for Additional Depth R.M.
34 P / F of C.I. rungs No.
35 P / F Double seal C.I. manhole cover of size 600mmx600mmx100mm No. 25
36 Constructing of Honeycomb brick mashonry Cu.M.
37 Filling the angular shape brick bats. Cu.M.
38 M.S. Plate Cover No.
Total of Section - 'K'
Section 'L' : Road Work
1 Sub grade preparation incl. Excavation and Rolling Cu.M.
2 Yellow soil filling in layers Cu.M.
3 335mm thick Granular Sub Base Cu.M.
4 200mm thick Water Bound Maccadam Cu.M.
5 60mm thick Binder course Sq.M.
6 25mm thk. Wearing Course Sq.M.
7 Seal Coat Sq.M.
8 L Shape Pre cast R.C.C. M25 Kerbing R.M.
9 Oil Paint to Kerbing Stone R.M.
10 Interlocking coloured Concr. Block 200 x 100 x 40 Sq.M.
11 P/L N.P.3 Class Hume Pipes
(a) 200mm dia. R.M.
(b) 300mm dia. R.M.
(c) 450mm dia. R.M.
(d) 600mm dia. R.M.
(e) 750mm dia. R.M.
(e) 900mm dia. R.M.
12 Cast in situ Paving with Grass Slot Sq.M.
13 2mm Thick Thermoplastic Paint Sq.M.
14 150mm thick Concrete Panel Sq.M.
Total of Section - 'L'
Section ‘M: Area Grading and Development
1 Area grading in all types of soil including excavation upto 1.50 mtr. depth Cu.M.
2 Approved Good quality Earth brought from Outside Cu.M.
Total of Section - 'M'
VibeArch Associates. Bharuch
Client Name : Paras Pharmachem. Saykha
Name of Work : Proposed Civil Works for Plant Bulding, Boler House, RM Store, FG Store, UG Tank, Chlorine Shed, Adminstration Bldg, ETP, Road & Ancillary Works
Bill of Quantity
Item No. Description Unit No L B D Qty Total Qty
Section 'A' : Earthwork :
1(A) Excavation in all types of Soil
(a) Up to 1.50 mtr. Depth Cu.M.
For Pile Cap 17
(b) From 1.50 mtr. to 3.00 mtr. Depth Cu.M.
( c ) From 3.00 mtr. to 4.5.00 mtr. Depth
(e) From 1.50 mtr. to 3.00 mtr. Depth Soft Rock Cu.M. QRO
(d) From 1.50 mtr. to 3.00 mtr. Depth Hard Rock Cu.M. QRO
2 Backfilling in foundation with approved materials 0
(a) Selected earth obtained from excavation vide item no. 1 Cu.M.
Ex upto 1.5 Mtr
Pile Caps & Columns
(b) Approved Good quality Earth brought from Outside Cu.M.
(c) Sand (2.6 to 2.8 F.M.) brought from Outside Cu.M.
3 Filling in plinth with approved material
(a) Selected earth obtained from excavation vide item no. 1 Cu.M.
(b) Approved Good quality Earth brought from Outside Cu.M.
Less Available earth
(c) Sand (2.6 to 2.8 F.M.) brought from Outside Cu.M.
4 Dry Stone Metal Soling - 230 mm thk. Cu.M.
5 Antitermite Treatment. Sq.M. 1
6 Surface Cutting Sq.M.
13 Under Reamed pile single bulb
(a) 350 mm Dia 5.0 Mt depth from NGL Rmt 90
(a) 350mm Dia Rmt 90
Total of Section - 'A'
Section 'B' : P.C.C. / R.C.C. Work :
1 P.C.C. in Foundation and Floor
For Pile Cap 17
2 R.C.C M30 for Piles with Tremie
(a) 350 mm Dia 6.0 mtr Depth Rmt 90 6.5
2 R.C.C. M:25 by batching Plant
(a) For Foundation and up to Plinth lvl. Cu.M.
(b) For Superstructure up to 5.00 mtr. Cu.M.
Mezzanine Floor Slab Beam 1
(c) - Do - but from 5.00 to 10.00 mtr. Height
3 Reinforcement 0
(a) Mild Steel Bars. M.T. QRO
(b) High Strength Deformed Bars. M.T. QRO
(c) TMT Bars M.T.
For Foundation and up to Plinth lvl. Cu.M.
For Superstructure 0.00 to 5.0 Mtr. Cu.M.
- Do - but from 5.00 to 10.00 mtr. Height Cu.M.
- Do - but from 7.50 to 11.25 mtr. Height Cu.M.
- Do - but from 11.25 to 15.00 mtr. Height Cu.M.
4 Form work / Shuttering
(a) For Foundation and up to Plinth lvl. Sq.m
Pile Caps 17 0.000 0.6
For Columns 17 2
Pile Caps 6 0.35
For Columns 6 0.999 2
For Floor 1 0.15
For Steps 1 0.15
Bolier Foundations 1 100
(b) -Do- upto 5.00 Mtr Ht
For Columns 17 5
Mezzanine Floor Slab Beam 1
(c ) - Do - but from 5.00 to 10.00 mtr Ht
For Columns 17 1.5
Tie Beam 1 0.999
5 Precast Reinforced Cement Slab - R.C.C. M:25 Cu.M.
6 Water Proofing admixture in Liquid form. Ltr.
7 Free Flow Non-Shrink Grout. (FOSROC GP-2) Cu.M.
8 25mm thick Premoulded compressible foam for expansion joint filler. Sq.M.
9 Expansion Joint filler. Rmt.
10 Expansion Joint Cover. Rmt.
11 Staging for Direct Ht Cu.M.
Total of Section - `B'
Section 'C' : Masonary Work :
1 Brick Masonary C.M. 1:6 for fdn. and plinth Cu.M.
On Plinth Beams upto Floor Level 1
2 Brick mansonary in C.M. 1:6 0
(a) Up to 5.00 mtr. Height Cu.M.
(b) - Do - but from 5.00 to 10.00 mtr Ht Cu.M.
( c) - Do - but from 5.00 to 10.00 mtr Ht
( d) - Do - but from 11.25 to 15.00 mtr. Height
3 Brick Partition Wall - 115mm thk. Sq.M.
4 Extra over item no 1 & 2 for masonry in 1:4 Cement mortar instead of 1:6 Cu.M. QRO
Total of Section - `C'
Section 'D' : Structural Steel Work :
1 Hot Rolled Steel Structure
(i) Fully Welded Structure M.T. 1 60
(ii) Erection incl. Alignment M.T.
(iii) Applying First Coat Oil Paint M.T.
(iv) Applying Second Coat Oil Paint M.T.
2 RHS / SHS - TISCO Tube Structure 0
(i) Fully Welded Structure M.T. QRO
(ii) Erection incl. Alignment M.T.
(iii) Applying First Coat Oil Paint M.T.
(iv) Applying Second Coat Oil Paint M.T.
3 Sag Roads KG 1.2 0.89
4 Foundation Bolts KG 1.2 1.58
5 Cold Rolled Steel Structure M.T.
Total of Section - `D'
Section 'E' : Roofing, Cladding, etc.
1 0.65 mm. thk. Galvalume Color coated plain sheets for accessories
(a) Below 150mm size R.M.
(b) 150mm to 250mm size R.M.
(c) 250mm to 650mm size R.M. 3
(f) North Light Curve R.M.
(g) Apron Piece R.M.
2 0.47mm thk. Bare Galvalume Sheets for roofing Sq.M.
3 0.47mm thk. Galvalume Color Coated Sheets Cladding Sq.M.
4 4mm Thk Aluminium Foil Insulation Sq.M.
5 Armstrong Acoustical Mineral Fiber False Ceiling-1210 x 610 Sq.M.
6 - Do - but for 610 x 610mm - Bottom Laminated Sq.M.
7 - Do - but for 610 x 610mm - Both Side Laminated Sq.M.
8 G.I. Rain Water Gutter Sq.M. 2 1
9 Rain Water Down Take pipe (P.V.C.)
(a) 90mm. Dia. R.M.
(b) 110mm. Dia. R.M. 4
(c) 125mm. Dia. R.M.
(d) 160mm. Dia. R.M.
(e) 180mm. Dia. R.M.
10 Streamline ridge Ventilators
(a) SRV - 600 R.M.
11 P & F Translucent Roof light sheets 2mm thick plycarbonate corugated Sq.M.
12 Air vent turbine - VERGOLA Ventilator
(a) Model - AV 600 No. 4
Total of Section - 'E'
Section 'F' : Doors / Windows / Ventilators
1 Box type Door Frame 125mm x 60mm - Pressed Steel Sheets R.M.
2 Fully Glazed Aluminum Door Kgs.
3 35mm thick laminated flush door shutter Sq.M.
4 Aluminum Anodised frame Window.
(a) Fully Glazed Fixed type. Kgs.
(b) - Do - but sliding type 50% opening. Kgs. 9
(c) Fully glazed Fixed type but fixed glass strips louvers Kgs. 11
(d) Fully glazed Fixed type but Adjustable glass strips louvers Kgs.
(e) Openable type shutters Kgs.
5 Supplying, providing and fixing of Float glass
(a) 4mm thick Sq.M.
(b) 5.5 to 6mm thick Sq.M. 9
(c) 8mm thick Sq.M.
(d) 10mm thick Sq.M.
(e) 12mm thick Sq.M.
6 Extra over Item No. 5 for Toughening of Glass.
(a) 4mm thick Sq.M.
(b) 5.5 to 6mm thick Sq.M.
(c) 8mm thick Sq.M.
(d) 10mm thick Sq.M.
(e) 12mm thick Sq.M.
7 Extra over Item No. 5 for Frosting of Glass of any thick Sq.M.
8 Extra over Item No. 2, 4 and 11 for
(a) Extra for Powder Coating Kgs.
(b) Extra for Color Anodizing. Kgs.
9 Hydraulic Door Closer No.
10 Plastic section Doors of Syntex Sq.M.
11 Aluminum Frame Door partially galzed and partially laminated board panel Kgs.
12 Supplying, providing and fixing 10mm thick laminated board. Sq.M.
13 Rolling Shutter - 18 gauge thickness
(a) - Do - with gear arrangement. Sq.M.
(b) - Do - without gear arrangement. Sq.M.
(c) - Do - but with 100% Grill type with gear arrangement. Sq.M.
(d) - Do - but with 100% Grill type without gear arrangement. Sq.M.
(e) - Do - but with 25% of the area to be Grill type with gear arrangement Sq.M. 2
14 Extra for providing motorized system to
(a) Sliding Door No.
(b) Rolling Shutter No.
15 Aluminium Windows with Double Glass (Domal-40 series) Sq.M.
16 Providing and fixing Acoustics Partitions Sq.M.
17 Fire Proof Door Sq.M.
Total of Section - 'F'
Section 'G' : Plastering
1 20 mm thk. water proof cement plaster. Sq.M.
2 12 mm thk. Cement Plaster to all surface 0
(a) 12mm thk Cement Plaster upto Plinth
(b) From plinth to 5.00 mtr. Height Sq.M.
(b) From 5.0 mtr. to 10.0 mtr. Height Sq.M.
Between Boiler & Workshop 1 1.5
3 Double coat Sand Faced Plaster Sq.M.
4 6mm thk. Cement Plaster over all R.C.C. Work Sq.M. 1
5 Extra over Item no 2 for provide (over uncourse / Random rubble masonry) additional plaster thickness of 13mm Sq.M.
6 Extra over Item no 3 for provide (over uncourse / Random rubble masonry) additional plaster thickness of 13mm Sq.M.
Total of Section - 'G'
Section 'H' : Painting
1 Cement Paint Sq.M.
2 Acrylic Distemper Sq.M.
3 Oil bound distemper Sq.M.
4 Weather seal coat exterior quality paint Sq.M.
5 Texturised matt finished paint Sq.M.
6 Acrylic emulsion (Matt & glossy) Paint Sq.M.
7 lime white wash Sq.M.
Total of Section - 'H'
Section 'I' : Flooring / Skirting / Dado
1 Providing and Laying Granolithic Floor
(a) 40mm thick. Granolithic floor. (With out vacuum dewatering ) Sq.M.
(b) 50mm thick. Granolithic floor. (With out vacuum dewatering) Sq.M. 1
(c) 75mm thick. Granolithic floor. (With vacuum dewatering) Sq.M.
(d) 100mm thick. Granolithic floor. (With vacuum dewatering) Sq.M.
(e) 125mm thick. Granolithic floor. (With vacuum dewatering) Sq.M.
(f) 150mm thick. Granolithic floor (With vacuum dewatering) Sq.M. 1
2 Non Metallic floor Hardner Kgs. 1 5
3 Ashford Formula Floor treatment Sq.M.
4 Polyproplylene fibrous reinforcement Kgs.
5 Expansion Joints in the Floor R.M. 1
6 Reinforcement Bars for Flooring
(a) Mild Steel Bars M.T.
(b) H.Y.S.D. Bars (T.M.T. Tor Steel) M.T. 5
(c) 3.175mm (10 gauge) 50mm x 50mm weld mesh M.T.
(d) Prefabricated cold rolled welded wire fabric M.T.
7 Isolation Joints R.M.
8 White Glazed Ceramic Tiles - 6mm thk.
(a) In Floors Sq.M.
(b) In Dado Sq.M.
9 Extra for Colored Ceramic Tiles
(a) In Floors Sq.M.
(b) In Dado Sq.M.
10 Extra for Matt finish Colored tiles
(a) In Floors Sq.M.
(b) In Dado Sq.M.
11 Polished Kota Stone Flooring - 30 to 40mm thk. Sq.M.
12 Polished Kotah Stone Flooring - 25 to 30mm thk. Sq.M.
13 Polished Kota Stone 100mm high Skirting fixing by Mortar R.M.
(a) Polished Kota Stone 100mm high Skirting fixing by Adhesiv R.M.
14 P.V.C. Vinyl Flooring - 3 mm thk. Anti static Sq.M.
15 Marble Flooring
(a) Makrana white marble. Sq.M.
(b) For Udaipur / Kesariaji green marble. Sq.M.
(c) Makrana white marble Skirting R.M.
(d) For Udaipur / Kesariaji green marble Skirting R.M.
16 20mm thick Acid resistance tiles Sq.M.
17 False Flooring Sq.M.
18 250 micron PVC Sheet Sq.M.
19 Minimum 10mm thick Vetrified Tiles in floor with 100mm Skirting Sq.M.
20 Polish Kota stone for Staircase and Window Sill Sq.M.
21 Marble for Staircase and Window Sill Sq.M.
Window Jambs 9 0.000
22 Stone Cladding
(a) Nimbaheda Rough Stone Sq.M.
(b) 8 to 10mm thick Polish Granite Sq.M.
(c) Red Agra Stone Sq.M.
23 2 mm thk.Self leveling Epoxy Coating Sq.M.
Total of Section - 'I'
Sectiom 'J' : Miscellaneous Items
1 P.C.C. Fillet
(a) 100 x 100mm size R.M.
(b) 150 x 150mm size R.M.
2 100mm thk. Partition with Double Gyp. Board on each face. Sq.M.
3 G.I. Expanded Chain link Jali Sq.M.
4 DORMA Door Sq.M.
5 Breaking of R.C.C. at all levels & Pile Head Cu.M. 90 0.5
6 Breaking of Brickwork and shifting of debris at all levels Cu.M.
7 100mm thk. Partition with Single Gyp. Board on each face. Sq.M.
8 Making & Finishing Openings of any size Sq.M.
9 Making corner fillet 25 x 25mm size in Epoxy modified polymer mortar. R.M.
10 Fixing 450mm dia. Exhaust fan No.
11 Fixing 300mm dia. Exhaust fan. No.
12 Fixing 250mm dia. Exhaust fan. No.
13 India Type waterproofing Sq.M.
14 Red Agra Stone Paving. Sq.M.
15 P & E Structural glazing Sq.M.
16 1800 mm high Barbed Wire Fencing R.M. 1
17 Dumbble Type PVC Water Stopper R.M.
18 Providing and Fixing Aluminum Composite Panel
(a) Total thickness 2.0mm Sq.M.
(b) Total thickness 4.0mm Sq.M.
19 75mm thick Precast M30 Grade Concrete Paver Block Sq.M.
20 Aluminum Nosing angle Kg
21 3mm thick APP & SBS Polymeric Water Proofing Membbrane Sq.M.
22 G.I. "B'' Class Pipe Nozzle with Puddle Flange
(a) 150mm dia x 1000mm Long. No
(b) 200mm dia x 1000mm Long. No
(c) 300mm dia x 1000mm Long. No
23 G.I.Pre painted Sheets Partition Sq.M.
24 2mm thick Polythene or Tarpaulin sheet curtain wall Sq.M.
25 Perforated Pipe P.V.C. 225mm dia R.M.
26 Pebble Filling as Filter media for Rain Harvesting
(a) 40mm to 65mm Cu.M.
(b) 20mm to 30mm Cu.M.
27 Existing Structure Roof sheet & Wall sheet Removing & Staking Sq.M.
28 Existing Steel Structure Member Remove & Stacking M.T
29 Providing and fixing Rebaring
(a) 8mm Bars No
(b) 10mm Bars No
(c) 12mm Bars No
(d) 16mm Bars No
30 Providing and fixing Anchor Fastner
(a) 10mm Bars No
(b) 12mm Bars No
(c) 16mm Bars No
(d) 20mm Bars No
32 Modular merino toilet partition Sq.M.
Total of Section - 'J'
Section 'K' : Sanitary Installation, Water Supply & Drainage
1 White China Water Closet (India type) No.
2 White China Water Closet (Orissa type) No. 4
3 White China Water Closet Universal (Anglo Indian) Type No.
4 White China Water Closet European Floor mounting type. No. 1
5 White China Water Closet European wall Hung type. No.
6 Extra for Colured Wall hung European W.C. No.
7 Wash Basin No. 3
8 Stainless Steel Sink No.
9 Wall Mixer No.
10 Shower rose with Arm No.
11 Wash Basin Mixer Center Hole No.
12 Senso Urinal No.
13 Flat Back Large Urinal
a Single urinal No. 4
b Two urinal Set No.
c Three Urinal Set No.
14 Marble Partition 1200 x 650 No.
a In Bathroom (Cat.no.107) No.
b In Hand Wash area Sensor Taps (Cat no. 51011) No.
c In W.C. (Cat.no.039) No. 5
16 Toilet Paper Holder No.
17 Mirror No. 3
18 C.P.Brass Towel Rail No.
19 Liquid Soap Container No.
20 P/F PVC Soil, waste and vent Pipe
(a) 150 mm Dia. PVC Soil Pipe. R.M.
(b) 100 mm Dia. PVC Iron Soil Pipe. R.M.
(c) 75 mm Dia. PVC Pipe. R.M.
21 PVC Floor Trap 100 mm INLET & 100mm dia. OUTLET No. 5
22 P.C.C. 1:2:4 around Pipe
(a) 150 mm Dia. PVC Pipe. R.M.
(b) 100 mm Dia. PVC Pipe. R.M.
(c) 75 mm Dia. PVC Soil Pipe. R.M.
23 Painting of G. I. Pipes with 2 coats of bitumastic paint
(a) 15 mm dia nominal bore. R.M.
(b) 20 mm dia nominal bore. R.M.
(c) 25 mm dia nominal bore. R.M.
(d) 40 mm dia nominal bore R.M.
(e) 50 mm dia nominal bore R.M.
(f) 75 mm dia. nominal bore. R.M.
(g) 100 mm dia. nominal bore. R.M.
24 P/F of UPVC Pipes including all fittings
(a) 15 mm dia. Nominal Bore R.M.
(b) 20 mm dia. Nominal Bore R.M.
(c) 25 mm dia. Nominal Bore R.M.
(d) 40 mm dia. Nominal Bore R.M.
(e) 50 mm dia. Nominal Bore R.M.
(f) 75 mm dia. Nominal Bore R.M.
(g) 100 mm dia. Nominal Bore R.M.
25 P/F Brass Full Way Valve with wheel tested on 20 kg/sqm
(a) 15 mm dia. Nominal Bore No. 3
(b) 20 mm dia. Nominal Bore No.
(c) 25 mm dia. Nominal Bore No. 3
(d) 40 mm dia. Nominal Bore No.
(e) 50 mm dia. Nominal Bore No. 3
(f) 75 mm dia. Nominal Bore No.
(g) 100 mm dia. Nominal Bore No.
26 Sintex Water Tank
(a) 500 ltr. Capacity Tank No.
(b) 1000 ltr. Capacity Tank No. 2
0 (c) 2000 ltr. Capacity Tank No.
(d) 5000 ltr. Capacity Tank No.
27 Stoneware pipe 1.50 mtr. Deep
(a) 150 mm dia. S.W. pipe R.M.
(b) 230 mm dia. S.W. pipe R.M.
(c) 300 mm dia. S.W. pipe R.M.
28 - Do - but below 1.50 mtr. To 3.00 mtr. Depth
(a) 150 mm dia. S.W. pipe R.M.
(b) 230 mm dia. S.W. pipe R.M.
(c) 300 mm dia. S.W. pipe R.M.
29 PVC Pipes of 6 Kg. / Sq.M. - 1.50 mtr. Deep
(a) 160 mm dia. P.V.C. pipe R.M.
(b) 225 mm dia. P.V.C. pipe R.M.
(c) 315mm dia P.V.C. Pipe R.M.
30 PVC Pipes of 6 Kg. / Sq.M. - 1.5 mtr. To 3.00 mtr. Depth
(a) 160 mm dia. P.V.C. pipe R.M.
(b) 225 mm dia. P.V.C. pipe R.M.
(c) 315mm dia P.V.C. Pipe R.M.
31 Stone ware Gully trap No. 5
32 Manhole Chamber up to 1.50 mtr. Depth No. 5
33 Extra over above Item for Additional Depth R.M.
34 P / F of C.I. rungs No.
35 P / F Double seal C.I. manhole cover of size 600mmx600mmx100mm No. 25
36 Constructing of Honeycomb brick mashonry Cu.M.
37 Filling the angular shape brick bats. Cu.M.
38 M.S. Plate Cover No.
Total of Section - 'K'
Section 'L' : Road Work
1 Sub grade preparation incl. Excavation and Rolling Cu.M.
2 Yellow soil filling in layers Cu.M.
3 335mm thick Granular Sub Base Cu.M.
4 200mm thick Water Bound Maccadam Cu.M.
5 60mm thick Binder course Sq.M.
6 25mm thk. Wearing Course Sq.M.
7 Seal Coat Sq.M.
8 L Shape Pre cast R.C.C. M25 Kerbing R.M.
9 Oil Paint to Kerbing Stone R.M.
10 Interlocking coloured Concr. Block 200 x 100 x 40 Sq.M.
11 P/L N.P.3 Class Hume Pipes
(a) 200mm dia. R.M.
(b) 300mm dia. R.M.
(c) 450mm dia. R.M.
(d) 600mm dia. R.M.
(e) 750mm dia. R.M.
(e) 900mm dia. R.M.
12 Cast in situ Paving with Grass Slot Sq.M.
13 2mm Thick Thermoplastic Paint Sq.M.
14 150mm thick Concrete Panel Sq.M.
Total of Section - 'L'
Section ‘M: Area Grading and Development
1 Area grading in all types of soil including excavation upto 1.50 mtr. depth Cu.M.
2 Approved Good quality Earth brought from Outside Cu.M.
Total of Section - 'M'
VibeArch Associates. Bharuch
Client Name : Paras Pharmachem. Saykha
Name of Work : Proposed Civil Works for Plant Bulding, Boler House, RM Store, FG Store, UG Tank, Chlorine Shed, Adminstration Bldg, ETP, Road & Ancillary Works
Bill of Quantity
Item No. Description Unit No L B D Qty Total Qty
Section 'A' : Earthwork :
1(A) Excavation in all types of Soil
(a) Up to 1.50 mtr. Depth Cu.M.
For Pile Cap 11
(b) From 1.50 mtr. to 3.00 mtr. Depth Cu.M.
( c ) From 3.00 mtr. to 4.5.00 mtr. Depth
(e) From 1.50 mtr. to 3.00 mtr. Depth Soft Rock Cu.M. QRO
(d) From 1.50 mtr. to 3.00 mtr. Depth Hard Rock Cu.M. QRO
2 Backfilling in foundation with approved materials 0
(a) Selected earth obtained from excavation vide item no. 1 Cu.M.
Ex upto 1.5 Mtr
Pile Caps & Columns
(b) Approved Good quality Earth brought from Outside Cu.M.
(c) Sand (2.6 to 2.8 F.M.) brought from Outside Cu.M.
3 Filling in plinth with approved material
(a) Selected earth obtained from excavation vide item no. 1 Cu.M. 1
(b) Approved Good quality Earth brought from Outside Cu.M.
Less Available earth
(c) Sand (2.6 to 2.8 F.M.) brought from Outside Cu.M.
4 Dry Stone Metal Soling - 230 mm thk. Cu.M.
5 Antitermite Treatment. Sq.M. 1
6 Surface Cutting Sq.M.
13 Bore cast in situ pile
(a) 350 mm Dia 5.0 Mt depth from NGL No
(b) 450 mm Dia 10.0 Mtr Depth from NGL NO 11.5
14 Extra over Item no 13 for Additional length
(a) 350 mm Dia Rmt
(b) 450 mm Dia Rmt
(a) 350mm Dia Rmt
(b) 450mm Dia Rmt
Total of Section - 'A'
Section 'B' : P.C.C. / R.C.C. Work :
1 P.C.C. in Foundation and Floor
2 R.C.C M30 for Piles with Tremie
(b) 450 mm Dia 6.0 mtr Depth Rmt 130 10.5
2 R.C.C. M:25 by batching Plant
(a) For Foundation and up to Plinth lvl. Cu.M.
For Toilet Footings 4
Lift foundation 1
(b) For Superstructure up to 5.00 mtr. Cu.M.
Toilet Columns 4
Slab Beam @ 5.00 mt 1
(c) - Do - but from 5.00 to 10.00 mtr. Height
Slab Beam @ 10.00 mt 1
(d) - Do - but from 10.00 to 15.00 mtr. Height
Slab Beam @ 10.00 mt 1
(e) - Do - but from 15.00 to 20.00 mtr. Height
Lift and Stair Cabin 1
3 Reinforcement 0
(a) Mild Steel Bars. M.T. QRO
(b) High Strength Deformed Bars. M.T. QRO
(c) TMT Bars M.T.
For Foundation and up to Plinth lvl. Cu.M.
For Superstructure 0.00 to 5.0 Mtr. Cu.M.
- Do - but from 5.00 to 10.00 mtr. Height Cu.M.
- Do - but from 10.00 to 15.00 mtr. Height Cu.M.
- Do - but from 15.00 to 20.00 mtr. Height Cu.M.
4 Form work / Shuttering
(a) For Foundation and up to Plinth lvl. Sq.m
For Columns 0.45 1.5
For Toilet Footings 2.5 0.5
Columns 0.35 0.000
Lift foundation 1 0.35
(b) -Do- upto 5.00 Mtr Ht
For Columns 0.45 5
Toilet Columns 0.35 4
TS Beam 2 0.325
Slab Beam @ 5.00 mt 2 0.45
(c ) - Do - but from 5.00 to 10.00 mtr Ht
For Columns 100 5
Slab Beam @ 10.00 mt 2 0.45
(d) - Do - but from 10.00 to 15.00 mtr. Height
For Columns 100 5
Slab Beam @ 10.00 mt 2 0.45
(e) - Do - but from 15.00 to 20.00 mtr. Height
For Columns 100 1
Lift and Stair Cabin 1
5 Precast Reinforced Cement Slab - R.C.C. M:25 Cu.M.
6 Water Proofing admixture in Liquid form. Ltr.
7 Free Flow Non-Shrink Grout. (FOSROC GP-2) Cu.M.
8 25mm thick Premoulded compressible foam for expansion joint filler. Sq.M.
9 Expansion Joint filler. Rmt.
10 Expansion Joint Cover. Rmt.
11 Staging for Direct Ht Cu.M.
Total of Section - `B'
Section 'C' : Masonary Work :
1 Brick Masonary C.M. 1:6 for fdn. and plinth Cu.M.
On Plinth Beams upto Floor Level 1
2 Brick mansonary in C.M. 1:6
(a) Up to 5.00 mtr. Height Cu.M.
(b) -Do- from 5.00 mtr to 10.00 mtr . Height Cu.M.
(c) -Do- from 10.00 mtr to 15.00 mtr . Height Cu.M.
(d) - Do - but from 15.00 to 20.00 mtr Ht Cu.M.
3 Brick Partition Wall - 115mm thk. Sq.M. 50
4 Extra over item no 1 & 2 for masonry in 1:4 Cement mortar instead of 1:6 Cu.M. QRO
Total of Section - `C'
Section 'D' : Structural Steel Work :
1 Hot Rolled Steel Structure
(i) Fully Welded Structure M.T. 1
(ii) Erection incl. Alignment M.T.
(iii) Applying First Coat Oil Paint M.T.
(iv) Applying Second Coat Oil Paint M.T.
2 RHS / SHS - TISCO Tube Structure 0
(i) Fully Welded Structure M.T. QRO
(ii) Erection incl. Alignment M.T.
(iii) Applying First Coat Oil Paint M.T.
(iv) Applying Second Coat Oil Paint M.T.
4 Foundation Bolts KG
5 Cold Rolled Steel Structure M.T.
Total of Section - `D'
Section 'E' : Roofing, Cladding, etc.
1 0.65 mm. thk. Galvalume Color coated plain sheets for accessories
(a) Below 150mm size R.M.
(b) 150mm to 250mm size R.M.
(c) 250mm to 650mm size R.M.
(f) North Light Curve R.M.
(g) Apron Piece R.M.
2 0.47mm thk. Bare Galvalume Sheets for roofing Sq.M.
3 0.47mm thk. Galvalume Color Coated Sheets Cladding Sq.M.
4 4mm Thk Aluminium Foil Insulation Sq.M.
5 Armstrong Acoustical Mineral Fiber False Ceiling-1210 x 610 Sq.M.
6 - Do - but for 610 x 610mm - Bottom Laminated Sq.M.
7 - Do - but for 610 x 610mm - Both Side Laminated Sq.M.
8 G.I. Rain Water Gutter Sq.M.
9 Rain Water Down Take pipe (P.V.C.)
(a) 90mm. Dia. R.M.
(b) 110mm. Dia. R.M.
(c) 125mm. Dia. R.M. 6 16
(d) 160mm. Dia. R.M.
(e) 180mm. Dia. R.M.
10 Streamline ridge Ventilators
(a) SRV - 600 R.M.
11 P & F Translucent Roof light sheets 2mm thick plycarbonate corugated Sq.M.
12 Air vent turbine - VERGOLA Ventilator
(a) Model - AV 600 No.
Total of Section - 'E'
Section 'F' : Doors / Windows / Ventilators
1 Box type Door Frame 125mm x 60mm - Pressed Steel Sheets R.M.
2 Fully Glazed Aluminum Door Kgs.
3 35mm thick laminated flush door shutter Sq.M.
4 Aluminum Anodised frame Window.
(a) Fully Glazed Fixed type. Kgs.
(b) - Do - but sliding type 50% opening. Kgs. 65
(c) Fully glazed Fixed type but fixed glass strips louvers Kgs. 6
(d) Fully glazed Fixed type but Adjustable glass strips louvers Kgs.
(e) Openable type shutters Kgs.
5 Supplying, providing and fixing of Float glass
(a) 4mm thick Sq.M.
(b) 5.5 to 6mm thick Sq.M. 65
(c) 8mm thick Sq.M.
(d) 10mm thick Sq.M.
(e) 12mm thick Sq.M.
6 Extra over Item No. 5 for Toughening of Glass.
(a) 4mm thick Sq.M.
(b) 5.5 to 6mm thick Sq.M.
(c) 8mm thick Sq.M.
(d) 10mm thick Sq.M.
(e) 12mm thick Sq.M.
7 Extra over Item No. 5 for Frosting of Glass of any thick Sq.M.
8 Extra over Item No. 2, 4 and 11 for
(a) Extra for Powder Coating Kgs.
(b) Extra for Color Anodizing. Kgs.
9 Hydraulic Door Closer No.
10 Plastic section Doors of Syntex Sq.M.
11 Aluminum Frame Door partially galzed and partially laminated board panel Kgs. 12
12 Supplying, providing and fixing 10mm thick laminated board. Sq.M. 24 1
13 Rolling Shutter - 18 gauge thickness
(a) - Do - with gear arrangement. Sq.M. 4
(b) - Do - without gear arrangement. Sq.M.
(c) - Do - but with 100% Grill type with gear arrangement. Sq.M.
(d) - Do - but with 100% Grill type without gear arrangement. Sq.M.
(e) - Do - but with 25% of the area to be Grill type with gear arrangement Sq.M.
14 Extra for providing motorized system to
(a) Sliding Door No.
(b) Rolling Shutter No.
15 Aluminium Windows with Double Glass (Domal-40 series) Sq.M.
16 Providing and fixing Acoustics Partitions Sq.M.
17 Fire Proof Door Sq.M.
Total of Section - 'F'
Section 'G' : Plastering
1 20 mm thk. water proof cement plaster. Sq.M.
2 12 mm thk. Cement Plaster to all surface 0
(a) 12mm thk Cement Plaster upto Plinth
(b) From plinth to 5.00 mtr. Height Sq.M.
(c) From 5.0 mtr. to 10.0 mtr. Height Sq.M.
(d) From 10.0 mtr. to 15.0 mtr. Height Sq.M.
(e) From 15.0 mtr. to 20.0 mtr. Height 1 5
3 Double coat Sand Faced Plaster Sq.M.
4 6mm thk. Cement Plaster over all R.C.C. Work Sq.M. 1 200
5 Extra over Item no 2 for provide (over uncourse / Random rubble masonry) additional plaster thickness of 13mm Sq.M.
6 Extra over Item no 3 for provide (over uncourse / Random rubble masonry) additional plaster thickness of 13mm Sq.M.
Total of Section - 'G'
Section 'H' : Painting
1 Cement Paint Sq.M.
2 Acrylic Distemper Sq.M.
3 Oil bound distemper Sq.M.
4 Weather seal coat exterior quality paint Sq.M.
5 Texturised matt finished paint Sq.M.
6 Acrylic emulsion (Matt & glossy) Paint Sq.M.
7 lime white wash Sq.M.
Total of Section - 'H'
Section 'I' : Flooring / Skirting / Dado
1 Providing and Laying Granolithic Floor
(a) 40mm thick. Granolithic floor. (With out vacuum dewatering ) Sq.M.
(b) 50mm thick. Granolithic floor. (With out vacuum dewatering) Sq.M. 2
(c) 75mm thick. Granolithic floor. (With vacuum dewatering) Sq.M.
(d) 100mm thick. Granolithic floor. (With vacuum dewatering) Sq.M.
(e) 125mm thick. Granolithic floor. (With vacuum dewatering) Sq.M.
(f) 150mm thick. Granolithic floor (With vacuum dewatering) Sq.M. 1
2 Non Metallic floor Hardner Kgs. 1 5
3 Ashford Formula Floor treatment Sq.M.
4 Polyproplylene fibrous reinforcement Kgs.
5 Expansion Joints in the Floor R.M. 1
6 Reinforcement Bars for Flooring
(a) Mild Steel Bars M.T.
(b) H.Y.S.D. Bars (T.M.T. Tor Steel) M.T. 5
(c) 3.175mm (10 gauge) 50mm x 50mm weld mesh M.T.
(d) Prefabricated cold rolled welded wire fabric M.T.
7 Isolation Joints R.M.
8 White Glazed Ceramic Tiles - 6mm thk.
(a) In Floors Sq.M.
(b) In Dado Sq.M.
9 Extra for Colored Ceramic Tiles
(a) In Floors Sq.M. 1
(b) In Dado Sq.M. 1
10 Extra for Matt finish Colored tiles
(a) In Floors Sq.M.
(b) In Dado Sq.M.
11 Polished Kota Stone Flooring - 30 to 40mm thk. Sq.M.
12 Polished Kotah Stone Flooring - 25 to 30mm thk. Sq.M.
13 Polished Kota Stone 100mm high Skirting fixing by Mortar R.M.
(a) Polished Kota Stone 100mm high Skirting fixing by Adhesiv R.M.
14 P.V.C. Vinyl Flooring - 3 mm thk. Anti static Sq.M.
15 Marble Flooring
(a) Makrana white marble. Sq.M.
(b) For Udaipur / Kesariaji green marble. Sq.M.
(c) Makrana white marble Skirting R.M.
(d) For Udaipur / Kesariaji green marble Skirting R.M.
16 20mm thick Acid resistance tiles Sq.M.
17 False Flooring Sq.M.
18 250 micron PVC Sheet Sq.M.
19 Minimum 10mm thick Vetrified Tiles in floor with 100mm Skirting Sq.M.
20 Polish Kota stone for Staircase and Window Sill Sq.M. 125
21 Marble for Staircase and Window Sill Sq.M.
22 Stone Cladding
(a) Nimbaheda Rough Stone Sq.M.
(b) 8 to 10mm thick Polish Granite Sq.M.
(c) Red Agra Stone Sq.M.
23 2 mm thk.Self leveling Epoxy Coating Sq.M.
Total of Section - 'I'
Sectiom 'J' : Miscellaneous Items
1 P.C.C. Fillet
(a) 100 x 100mm size R.M.
(b) 150 x 150mm size R.M.
2 100mm thk. Partition with Double Gyp. Board on each face. Sq.M.
3 G.I. Expanded Chain link Jali Sq.M.
4 DORMA Door Sq.M.
5 Breaking of R.C.C. at all levels & Pile Head Cu.M.
6 Breaking of Brickwork and shifting of debris at all levels Cu.M.
7 100mm thk. Partition with Single Gyp. Board on each face. Sq.M.
8 Making & Finishing Openings of any size Sq.M.
9 Making corner fillet 25 x 25mm size in Epoxy modified polymer mortar. R.M.
10 Fixing 450mm dia. Exhaust fan No.
11 Fixing 300mm dia. Exhaust fan. No.
12 Fixing 250mm dia. Exhaust fan. No.
13 India Type waterproofing Sq.M. 1
14 Red Agra Stone Paving. Sq.M.
15 P & E Structural glazing Sq.M.
16 1800 mm high Barbed Wire Fencing R.M. 1
17 Dumbble Type PVC Water Stopper R.M.
18 Providing and Fixing Aluminum Composite Panel
(a) Total thickness 2.0mm Sq.M.
(b) Total thickness 4.0mm Sq.M.
19 75mm thick Precast M30 Grade Concrete Paver Block Sq.M.
20 Aluminum Nosing angle Kg
21 3mm thick APP & SBS Polymeric Water Proofing Membbrane Sq.M.
22 G.I. "B'' Class Pipe Nozzle with Puddle Flange
(a) 150mm dia x 1000mm Long. No
(b) 200mm dia x 1000mm Long. No
(c) 300mm dia x 1000mm Long. No
23 G.I.Pre painted Sheets Partition Sq.M.
24 2mm thick Polythene or Tarpaulin sheet curtain wall Sq.M.
25 Perforated Pipe P.V.C. 225mm dia R.M.
26 Pebble Filling as Filter media for Rain Harvesting
(a) 40mm to 65mm Cu.M.
(b) 20mm to 30mm Cu.M.
27 Existing Structure Roof sheet & Wall sheet Removing & Staking Sq.M.
28 Existing Steel Structure Member Remove & Stacking M.T
29 Providing and fixing Rebaring
(a) 8mm Bars No
(b) 10mm Bars No
(c) 12mm Bars No
(d) 16mm Bars No
30 Providing and fixing Anchor Fastner
(a) 10mm Bars No
(b) 12mm Bars No
(c) 16mm Bars No
(d) 20mm Bars No
32 Modular merino toilet partition Sq.M.
Total of Section - 'J'
Section 'K' : Sanitary Installation, Water Supply & Drainage
1 White China Water Closet (India type) No. 2
2 White China Water Closet (Orissa type) No.
3 White China Water Closet Universal (Anglo Indian) Type No.
4 White China Water Closet European Floor mounting type. No. 1
5 White China Water Closet European wall Hung type. No.
6 Extra for Colured Wall hung European W.C. No.
7 Wash Basin No. 2
8 Stainless Steel Sink No.
9 Wall Mixer No.
10 Shower rose with Arm No.
11 Wash Basin Mixer Center Hole No.
12 Senso Urinal No.
13 Flat Back Large Urinal
a Single urinal No. 2
b Two urinal Set No.
c Three Urinal Set No.
14 Marble Partition 1200 x 650 No. 1
a In Bathroom (Cat.no.107) No.
b In Hand Wash area Sensor Taps (Cat no. 51011) No.
c In W.C. (Cat.no.039) No. 2
16 Toilet Paper Holder No.
17 Mirror No. 2
18 C.P.Brass Towel Rail No. 1
19 Liquid Soap Container No. 1
20 P/F PVC Soil, waste and vent Pipe
(a) 150 mm Dia. PVC Soil Pipe. R.M. 15
(b) 100 mm Dia. PVC Iron Soil Pipe. R.M.
(c) 75 mm Dia. PVC Pipe. R.M.
21 PVC Floor Trap 100 mm INLET & 100mm dia. OUTLET No. 3
22 P.C.C. 1:2:4 around Pipe
(a) 150 mm Dia. PVC Pipe. R.M.
(b) 100 mm Dia. PVC Pipe. R.M.
(c) 75 mm Dia. PVC Soil Pipe. R.M.
23 Painting of G. I. Pipes with 2 coats of bitumastic paint
(a) 15 mm dia nominal bore. R.M.
(b) 20 mm dia nominal bore. R.M.
(c) 25 mm dia nominal bore. R.M.
(d) 40 mm dia nominal bore R.M.
(e) 50 mm dia nominal bore R.M.
(f) 75 mm dia. nominal bore. R.M.
(g) 100 mm dia. nominal bore. R.M.
24 P/F of UPVC Pipes including all fittings
(a) 15 mm dia. Nominal Bore R.M. 25
(b) 20 mm dia. Nominal Bore R.M.
(c) 25 mm dia. Nominal Bore R.M. 25
(d) 40 mm dia. Nominal Bore R.M.
(e) 50 mm dia. Nominal Bore R.M. 25
(f) 75 mm dia. Nominal Bore R.M.
(g) 100 mm dia. Nominal Bore R.M.
25 P/F Brass Full Way Valve with wheel tested on 20 kg/sqm
(a) 15 mm dia. Nominal Bore No. 3
(b) 20 mm dia. Nominal Bore No.
(c) 25 mm dia. Nominal Bore No. 3
(d) 40 mm dia. Nominal Bore No.
(e) 50 mm dia. Nominal Bore No. 3
(f) 75 mm dia. Nominal Bore No.
(g) 100 mm dia. Nominal Bore No.
26 Sintex Water Tank
(a) 500 ltr. Capacity Tank No.
(b) 1000 ltr. Capacity Tank No.
0 (c) 2000 ltr. Capacity Tank No. 2
(d) 5000 ltr. Capacity Tank No.
27 Stoneware pipe 1.50 mtr. Deep
(a) 150 mm dia. S.W. pipe R.M.
(b) 230 mm dia. S.W. pipe R.M.
(c) 300 mm dia. S.W. pipe R.M.
28 - Do - but below 1.50 mtr. To 3.00 mtr. Depth
(a) 150 mm dia. S.W. pipe R.M.
(b) 230 mm dia. S.W. pipe R.M.
(c) 300 mm dia. S.W. pipe R.M.
29 PVC Pipes of 6 Kg. / Sq.M. - 1.50 mtr. Deep
(a) 160 mm dia. P.V.C. pipe R.M.
(b) 225 mm dia. P.V.C. pipe R.M.
(c) 315mm dia P.V.C. Pipe R.M.
30 PVC Pipes of 6 Kg. / Sq.M. - 1.5 mtr. To 3.00 mtr. Depth
(a) 160 mm dia. P.V.C. pipe R.M.
(b) 225 mm dia. P.V.C. pipe R.M.
(c) 315mm dia P.V.C. Pipe R.M.
31 Stone ware Gully trap No. 5
32 Manhole Chamber up to 1.50 mtr. Depth No. 5
33 Extra over above Item for Additional Depth R.M.
34 P / F of C.I. rungs No.
35 P / F Double seal C.I. manhole cover of size 600mmx600mmx100mm No. 3
36 Constructing of Honeycomb brick mashonry Cu.M. 25
37 Filling the angular shape brick bats. Cu.M. 25
38 M.S. Plate Cover No.
Total of Section - 'K'
Section 'L' : Road Work
1 Sub grade preparation incl. Excavation and Rolling Cu.M.
2 Yellow soil filling in layers Cu.M.
3 335mm thick Granular Sub Base Cu.M.
4 200mm thick Water Bound Maccadam Cu.M.
5 60mm thick Binder course Sq.M.
6 25mm thk. Wearing Course Sq.M.
7 Seal Coat Sq.M.
8 L Shape Pre cast R.C.C. M25 Kerbing R.M.
9 Oil Paint to Kerbing Stone R.M.
10 Interlocking coloured Concr. Block 200 x 100 x 40 Sq.M.
11 P/L N.P.3 Class Hume Pipes
(a) 200mm dia. R.M.
(b) 300mm dia. R.M.
(c) 450mm dia. R.M.
(d) 600mm dia. R.M.
(e) 750mm dia. R.M.
(e) 900mm dia. R.M.
12 Cast in situ Paving with Grass Slot Sq.M.
13 2mm Thick Thermoplastic Paint Sq.M.
14 150mm thick Concrete Panel Sq.M.
Total of Section - 'L'
Section ‘M: Area Grading and Development
1 Area grading in all types of soil including excavation upto 1.50 mtr. depth Cu.M.
2 Approved Good quality Earth brought from Outside Cu.M.
Total of Section - 'M'
VibeArch Associates. Bharuch
Client Name : Paras Pharmachem. Saykha
Name of Work : Proposed Civil Works for Plant Bulding, Boler House, RM Store, FG Store, UG Tank, Chlorine Shed, Adminstration Bldg, ETP, Road & Ancillary Works
Bill of Quantity
Item No. Description Unit No L B D Qty Total Qty
Section 'A' : Earthwork :
1(A) Excavation in all types of Soil
(a) Up to 1.50 mtr. Depth Cu.M.
For Pile Cap 12
(b) From 1.50 mtr. to 3.00 mtr. Depth Cu.M.
( c ) From 3.00 mtr. to 4.5.00 mtr. Depth
(e) From 1.50 mtr. to 3.00 mtr. Depth Soft Rock Cu.M. QRO
(d) From 1.50 mtr. to 3.00 mtr. Depth Hard Rock Cu.M. QRO
2 Backfilling in foundation with approved materials 0
(a) Selected earth obtained from excavation vide item no. 1 Cu.M.
Ex upto 1.5 Mtr
Pile Caps & Columns
(b) Approved Good quality Earth brought from Outside Cu.M.
(c) Sand (2.6 to 2.8 F.M.) brought from Outside Cu.M.
3 Filling in plinth with approved material
(a) Selected earth obtained from excavation vide item no. 1 Cu.M. 1
(b) Approved Good quality Earth brought from Outside Cu.M.
Less Available earth
(c) Sand (2.6 to 2.8 F.M.) brought from Outside Cu.M.
4 Dry Stone Metal Soling - 230 mm thk. Cu.M.
5 Antitermite Treatment. Sq.M. 1
6 Surface Cutting Sq.M.
13 Bore cast in situ pile
(a) 350 mm Dia 5.0 Mt depth from NGL No
(b) 450 mm Dia 10.0 Mtr Depth from NGL NO 140
14 Extra over Item no 13 for Additional length
(a) 350 mm Dia Rmt
(b) 450 mm Dia Rmt 50
(a) 350mm Dia Rmt
(b) 450mm Dia Rmt 130
Total of Section - 'A'
Section 'B' : P.C.C. / R.C.C. Work :
1 P.C.C. in Foundation and Floor
2 R.C.C M30 for Piles with Tremie
(b) 450 mm Dia 6.0 mtr Depth Rmt 140 10.5
3 R.C.C. M:25 by batching Plant
(a) For Foundation and up to Plinth lvl. Cu.M.
(b) For Superstructure up to 5.00 mtr. Cu.M.
Slab Beam @ 5.00 mt 1
(c) - Do - but from 5.00 to 10.00 mtr. Height
Slab Beam @ 10.00 mt 1
(d) - Do - but from 10.00 to 15.00 mtr. Height
Slab Beam @ 10.00 mt 1
(e) - Do - but from 15.00 to 20.00 mtr. Height
Lift and Stair Cabin 1
3 Reinforcement 0
(a) Mild Steel Bars. M.T. QRO
(b) High Strength Deformed Bars. M.T. QRO
(c) TMT Bars M.T.
For Piles Cu.M.
For Foundation and up to Plinth lvl. Cu.M.
For Superstructure 0.00 to 5.0 Mtr. Cu.M.
- Do - but from 5.00 to 10.00 mtr. Height Cu.M.
- Do - but from 10.00 to 15.00 mtr. Height Cu.M.
- Do - but from 15.00 to 20.00 mtr. Height Cu.M.
4 Form work / Shuttering
(a) For Foundation and up to Plinth lvl. Sq.m
For Columns 0.45 1.5
Lift foundation 1 0.35
(b) -Do- upto 5.00 Mtr Ht
For Columns 0.45 5
Slab Beam @ 5.00 mt 1
(c ) - Do - but from 5.00 to 10.00 mtr Ht
For Columns 0.45 5
Slab Beam @ 5.00 mt 1
(d) - Do - but from 10.00 to 15.00 mtr. Height
For Columns 0.45 5
Slab Beam @ 5.00 mt 1
(e) - Do - but from 15.00 to 20.00 mtr. Height
For Columns 0.45 1
Lift and Stair Cabin 1
5 Precast Reinforced Cement Slab - R.C.C. M:25 Cu.M.
6 Water Proofing admixture in Liquid form. Ltr.
7 Free Flow Non-Shrink Grout. (FOSROC GP-2) Cu.M.
8 25mm thick Premoulded compressible foam for expansion joint filler. Sq.M.
9 Expansion Joint filler. Rmt.
10 Expansion Joint Cover. Rmt.
11 Staging for Direct Ht Cu.M.
Total of Section - `B'
Section 'C' : Masonary Work :
1 Brick Masonary C.M. 1:6 for fdn. and plinth Cu.M.
On Plinth Beams upto Floor Level 1
2 Brick mansonary in C.M. 1:6
(a) Up to 5.00 mtr. Height Cu.M.
(b) -Do- from 5.00 mtr to 10.00 mtr . Height Cu.M.
(c) -Do- from 10.00 mtr to 15.00 mtr . Height Cu.M.
(d) - Do - but from 15.00 to 20.00 mtr Ht Cu.M.
3 Brick Partition Wall - 115mm thk. Sq.M.
4 Extra over item no 1 & 2 for masonry in 1:4 Cement mortar instead of 1:6 Cu.M. QRO
5 P/F C. Concrete Blocks 200mm wide preferably louver type for water prevention
(a) Up to 5.00 mtr. Height Sq.M.
(b) -Do- from 5.00 mtr to 10.00 mtr . Height Cu.M.
(c) -Do- from 10.00 mtr to 15.00 mtr . Height Cu.M.
(d) - Do - but from 15.00 to 20.00 mtr Ht Cu.M.
Total of Section - `C'
Section 'D' : Structural Steel Work :
1 Hot Rolled Steel Structure
(i) Fully Welded Structure M.T. 1
(ii) Erection incl. Alignment M.T.
(iii) Applying First Coat Oil Paint M.T.
(iv) Applying Second Coat Oil Paint M.T.
2 RHS / SHS - TISCO Tube Structure 0
(i) Fully Welded Structure M.T. QRO
(ii) Erection incl. Alignment M.T.
(iii) Applying First Coat Oil Paint M.T.
(iv) Applying Second Coat Oil Paint M.T.
4 Foundation Bolts KG
5 Cold Rolled Steel Structure M.T.
6 Insert Fabricating and installing
Angle for Cutout Mt
Holdfast 0.15 0.999
For Additional Works 1000
Total of Section - `D'
Section 'E' : Roofing, Cladding, etc.
1 0.65 mm. thk. Galvalume Color coated plain sheets for accessories
(a) Below 150mm size R.M.
(b) 150mm to 250mm size R.M.
(c) 250mm to 650mm size R.M.
(f) North Light Curve R.M.
(g) Apron Piece R.M.
2 0.47mm thk. Bare Galvalume Sheets for roofing Sq.M.
3 0.47mm thk. Galvalume Color Coated Sheets Cladding Sq.M.
4 4mm Thk Aluminium Foil Insulation Sq.M.
5 Armstrong Acoustical Mineral Fiber False Ceiling-1210 x 610 Sq.M.
6 - Do - but for 610 x 610mm - Bottom Laminated Sq.M.
7 - Do - but for 610 x 610mm - Both Side Laminated Sq.M.
8 G.I. Rain Water Gutter Sq.M.
9 Rain Water Down Take pipe (P.V.C.)
(a) 90mm. Dia. R.M.
(b) 110mm. Dia. R.M.
(c) 125mm. Dia. R.M. 6 16
(d) 160mm. Dia. R.M.
(e) 180mm. Dia. R.M.
10 Streamline ridge Ventilators
(a) SRV - 600 R.M.
11 P & F Translucent Roof light sheets 2mm thick plycarbonate corugated Sq.M.
12 Air vent turbine - VERGOLA Ventilator
(a) Model - AV 600 No.
Total of Section - 'E'
Section 'F' : Doors / Windows / Ventilators
1 Box type Door Frame 125mm x 60mm - Pressed Steel Sheets R.M.
2 Fully Glazed Aluminum Door Kgs.
3 35mm thick laminated flush door shutter Sq.M.
4 Aluminum Anodised frame Window.
(a) Fully Glazed Fixed type. Kgs.
(b) - Do - but sliding type 50% opening. Kgs.
(c) Fully glazed Fixed type but fixed glass strips louvers Kgs.
(d) Fully glazed Fixed type but Adjustable glass strips louvers Kgs.
(e) Openable type shutters Kgs.
5 Supplying, providing and fixing of Float glass
(a) 4mm thick Sq.M.
(b) 5.5 to 6mm thick Sq.M.
(c) 8mm thick Sq.M.
(d) 10mm thick Sq.M.
(e) 12mm thick Sq.M.
6 Extra over Item No. 5 for Toughening of Glass.
(a) 4mm thick Sq.M.
(b) 5.5 to 6mm thick Sq.M.
(c) 8mm thick Sq.M.
(d) 10mm thick Sq.M.
(e) 12mm thick Sq.M.
7 Extra over Item No. 5 for Frosting of Glass of any thick Sq.M.
8 Extra over Item No. 2, 4 and 11 for
(a) Extra for Powder Coating Kgs.
(b) Extra for Color Anodizing. Kgs.
9 Hydraulic Door Closer No.
10 Plastic section Doors of Syntex Sq.M.
11 Aluminum Frame Door partially galzed and partially laminated board panel Kgs.
12 Supplying, providing and fixing 10mm thick laminated board. Sq.M.
13 Rolling Shutter - 18 gauge thickness
(a) - Do - with gear arrangement. Sq.M.
(b) - Do - without gear arrangement. Sq.M.
(c) - Do - but with 100% Grill type with gear arrangement. Sq.M.
(d) - Do - but with 100% Grill type without gear arrangement. Sq.M.
(e) - Do - but with 25% of the area to be Grill type with gear arrangement Sq.M. 3 3
14 Extra for providing motorized system to
(a) Sliding Door No.
(b) Rolling Shutter No.
15 Aluminium Windows with Double Glass (Domal-40 series) Sq.M.
16 Providing and fixing Acoustics Partitions Sq.M.
17 Fire Proof Door Sq.M.
Total of Section - 'F'
Section 'G' : Plastering
1 20 mm thk. water proof cement plaster. Sq.M.
2 12 mm thk. Cement Plaster to all surface 0
(a) 12mm thk Cement Plaster upto Plinth
(b) From plinth to 5.00 mtr. Height Sq.M.
(c) From 5.0 mtr. to 10.0 mtr. Height Sq.M.
(d) From 10.0 mtr. to 15.0 mtr. Height Sq.M.
(e) From 15.0 mtr. to 20.0 mtr. Height 1 5
3 Double coat Sand Faced Plaster Sq.M.
4 6mm thk. Cement Plaster over all R.C.C. Work Sq.M.
5 Extra over Item no 2 for provide (over uncourse / Random rubble masonry) additional plaster thickness of 13mm Sq.M.
6 Extra over Item no 3 for provide (over uncourse / Random rubble masonry) additional plaster thickness of 13mm Sq.M.
Total of Section - 'G'
Section 'H' : Painting
1 Cement Paint Sq.M.
2 Acrylic Distemper Sq.M.
3 Oil bound distemper Sq.M.
4 Weather seal coat exterior quality paint Sq.M.
5 Texturised matt finished paint Sq.M.
6 Acrylic emulsion (Matt & glossy) Paint Sq.M.
7 lime white wash Sq.M.
Total of Section - 'H'
Section 'I' : Flooring / Skirting / Dado
1 Providing and Laying Granolithic Floor
(a) 40mm thick. Granolithic floor. (With out vacuum dewatering ) Sq.M.
(b) 50mm thick. Granolithic floor. (With out vacuum dewatering) Sq.M. 3
(c) 75mm thick. Granolithic floor. (With vacuum dewatering) Sq.M.
(d) 100mm thick. Granolithic floor. (With vacuum dewatering) Sq.M.
(e) 125mm thick. Granolithic floor. (With vacuum dewatering) Sq.M.
(f) 150mm thick. Granolithic floor (With vacuum dewatering) Sq.M. 1
2 Non Metallic floor Hardner Kgs. 1 5
3 Ashford Formula Floor treatment Sq.M.
4 Polyproplylene fibrous reinforcement Kgs.
5 Expansion Joints in the Floor R.M.
6 Reinforcement Bars for Flooring
(a) Mild Steel Bars M.T.
(b) H.Y.S.D. Bars (T.M.T. Tor Steel) M.T. 5
(c) 3.175mm (10 gauge) 50mm x 50mm weld mesh M.T.
(d) Prefabricated cold rolled welded wire fabric M.T.
7 Isolation Joints R.M.
8 White Glazed Ceramic Tiles - 6mm thk.
(a) In Floors Sq.M.
(b) In Dado Sq.M.
9 Extra for Colored Ceramic Tiles
(a) In Floors Sq.M.
(b) In Dado Sq.M.
10 Extra for Matt finish Colored tiles
(a) In Floors Sq.M.
(b) In Dado Sq.M.
11 Polished Kota Stone Flooring - 30 to 40mm thk. Sq.M.
12 Polished Kotah Stone Flooring - 25 to 30mm thk. Sq.M.
13 Polished Kota Stone 100mm high Skirting fixing by Mortar R.M.
(a) Polished Kota Stone 100mm high Skirting fixing by Adhesiv R.M.
14 P.V.C. Vinyl Flooring - 3 mm thk. Anti static Sq.M.
15 Marble Flooring
(a) Makrana white marble. Sq.M.
(b) For Udaipur / Kesariaji green marble. Sq.M.
(c) Makrana white marble Skirting R.M.
(d) For Udaipur / Kesariaji green marble Skirting R.M.
16 20mm thick Acid resistance tiles Sq.M.
17 False Flooring Sq.M.
18 250 micron PVC Sheet Sq.M.
19 Minimum 10mm thick Vetrified Tiles in floor with 100mm Skirting Sq.M.
20 Polish Kota stone for Staircase and Window Sill Sq.M.
21 Marble for Staircase and Window Sill Sq.M.
22 Stone Cladding
(a) Nimbaheda Rough Stone Sq.M.
(b) 8 to 10mm thick Polish Granite Sq.M.
(c) Red Agra Stone Sq.M.
23 2 mm thk.Self leveling Epoxy Coating Sq.M.
Total of Section - 'I'
Sectiom 'J' : Miscellaneous Items
1 P.C.C. Fillet
(a) 100 x 100mm size R.M.
(b) 150 x 150mm size R.M.
2 100mm thk. Partition with Double Gyp. Board on each face. Sq.M.
3 G.I. Expanded Chain link Jali Sq.M.
4 DORMA Door Sq.M.
5 Breaking of R.C.C. at all levels & Pile Head Cu.M.
6 Breaking of Brickwork and shifting of debris at all levels Cu.M.
7 100mm thk. Partition with Single Gyp. Board on each face. Sq.M.
8 Making & Finishing Openings of any size Sq.M.
9 Making corner fillet 25 x 25mm size in Epoxy modified polymer mortar. R.M.
10 Fixing 450mm dia. Exhaust fan No.
11 Fixing 300mm dia. Exhaust fan. No.
12 Fixing 250mm dia. Exhaust fan. No.
13 India Type waterproofing Sq.M. 1
14 Red Agra Stone Paving. Sq.M.
15 P & E Structural glazing Sq.M.
16 1800 mm high Barbed Wire Fencing R.M.
17 Dumbble Type PVC Water Stopper R.M.
18 Providing and Fixing Aluminum Composite Panel
(a) Total thickness 2.0mm Sq.M.
(b) Total thickness 4.0mm Sq.M.
19 75mm thick Precast M30 Grade Concrete Paver Block Sq.M.
20 Aluminum Nosing angle Kg
21 3mm thick APP & SBS Polymeric Water Proofing Membbrane Sq.M.
22 G.I. "B'' Class Pipe Nozzle with Puddle Flange
(a) 150mm dia x 1000mm Long. No
(b) 200mm dia x 1000mm Long. No
(c) 300mm dia x 1000mm Long. No
23 G.I.Pre painted Sheets Partition Sq.M.
24 2mm thick Polythene or Tarpaulin sheet curtain wall Sq.M.
25 Perforated Pipe P.V.C. 225mm dia R.M.
26 Pebble Filling as Filter media for Rain Harvesting
(a) 40mm to 65mm Cu.M.
(b) 20mm to 30mm Cu.M.
27 Existing Structure Roof sheet & Wall sheet Removing & Staking Sq.M.
28 Existing Steel Structure Member Remove & Stacking M.T
29 Providing and fixing Rebaring
(a) 8mm Bars No
(b) 10mm Bars No
(c) 12mm Bars No
(d) 16mm Bars No
30 Providing and fixing Anchor Fastner
(a) 10mm Bars No
(b) 12mm Bars No
(c) 16mm Bars No
(d) 20mm Bars No
32 Modular merino toilet partition Sq.M.
Total of Section - 'J'
Section 'K' : Sanitary Installation, Water Supply & Drainage
1 White China Water Closet (India type) No.
2 White China Water Closet (Orissa type) No.
3 White China Water Closet Universal (Anglo Indian) Type No.
4 White China Water Closet European Floor mounting type. No.
5 White China Water Closet European wall Hung type. No.
6 Extra for Colured Wall hung European W.C. No.
7 Wash Basin No.
8 Stainless Steel Sink No.
9 Wall Mixer No.
10 Shower rose with Arm No.
11 Wash Basin Mixer Center Hole No.
12 Senso Urinal No.
13 Flat Back Large Urinal
a Single urinal No.
b Two urinal Set No.
c Three Urinal Set No.
14 Marble Partition 1200 x 650 No.
a In Bathroom (Cat.no.107) No.
b In Hand Wash area Sensor Taps (Cat no. 51011) No.
c In W.C. (Cat.no.039) No.
16 Toilet Paper Holder No.
18 C.P.Brass Towel Rail No.
19 Liquid Soap Container No.
20 P/F PVC Soil, waste and vent Pipe
(a) 150 mm Dia. PVC Soil Pipe. R.M.
(b) 100 mm Dia. PVC Iron Soil Pipe. R.M.
(c) 75 mm Dia. PVC Pipe. R.M.
21 PVC Floor Trap 100 mm INLET & 100mm dia. OUTLET No.
22 P.C.C. 1:2:4 around Pipe
(a) 150 mm Dia. PVC Pipe. R.M.
(b) 100 mm Dia. PVC Pipe. R.M.
(c) 75 mm Dia. PVC Soil Pipe. R.M.
23 Painting of G. I. Pipes with 2 coats of bitumastic paint
(a) 15 mm dia nominal bore. R.M.
(b) 20 mm dia nominal bore. R.M.
(c) 25 mm dia nominal bore. R.M.
(d) 40 mm dia nominal bore R.M.
(e) 50 mm dia nominal bore R.M.
(f) 75 mm dia. nominal bore. R.M.
(g) 100 mm dia. nominal bore. R.M.
24 P/F of UPVC Pipes including all fittings
(a) 15 mm dia. Nominal Bore R.M. 50
(b) 20 mm dia. Nominal Bore R.M.
(c) 25 mm dia. Nominal Bore R.M. 50
(d) 40 mm dia. Nominal Bore R.M.
(e) 50 mm dia. Nominal Bore R.M. 50
(f) 75 mm dia. Nominal Bore R.M.
(g) 100 mm dia. Nominal Bore R.M.
25 P/F Brass Full Way Valve with wheel tested on 20 kg/sqm
(a) 15 mm dia. Nominal Bore No. 3
(b) 20 mm dia. Nominal Bore No.
(c) 25 mm dia. Nominal Bore No. 3
(d) 40 mm dia. Nominal Bore No.
(e) 50 mm dia. Nominal Bore No. 3
(f) 75 mm dia. Nominal Bore No.
(g) 100 mm dia. Nominal Bore No.
26 Sintex Water Tank
(a) 500 ltr. Capacity Tank No.
(b) 1000 ltr. Capacity Tank No.
0 (c) 2000 ltr. Capacity Tank No.
(d) 5000 ltr. Capacity Tank No.
27 Stoneware pipe 1.50 mtr. Deep
(a) 150 mm dia. S.W. pipe R.M.
(b) 230 mm dia. S.W. pipe R.M.
(c) 300 mm dia. S.W. pipe R.M.
28 - Do - but below 1.50 mtr. To 3.00 mtr. Depth
(a) 150 mm dia. S.W. pipe R.M.
(b) 230 mm dia. S.W. pipe R.M.
(c) 300 mm dia. S.W. pipe R.M.
29 PVC Pipes of 6 Kg. / Sq.M. - 1.50 mtr. Deep
(a) 160 mm dia. P.V.C. pipe R.M.
(b) 225 mm dia. P.V.C. pipe R.M.
(c) 315mm dia P.V.C. Pipe R.M.
30 PVC Pipes of 6 Kg. / Sq.M. - 1.5 mtr. To 3.00 mtr. Depth
(a) 160 mm dia. P.V.C. pipe R.M.
(b) 225 mm dia. P.V.C. pipe R.M.
(c) 315mm dia P.V.C. Pipe R.M.
31 Stone ware Gully trap No.
32 Manhole Chamber up to 1.50 mtr. Depth No.
33 Extra over above Item for Additional Depth R.M.
34 P / F of C.I. rungs No.
35 P / F Double seal C.I. manhole cover of size 600mmx600mmx100mm No.
36 Constructing of Honeycomb brick mashonry Cu.M.
37 Filling the angular shape brick bats. Cu.M.
38 M.S. Plate Cover No.
Total of Section - 'K'
Section 'L' : Road Work
1 Sub grade preparation incl. Excavation and Rolling Cu.M.
2 Yellow soil filling in layers Cu.M.
3 335mm thick Granular Sub Base Cu.M.
4 200mm thick Water Bound Maccadam Cu.M.
5 60mm thick Binder course Sq.M.
6 25mm thk. Wearing Course Sq.M.
7 Seal Coat Sq.M.
8 L Shape Pre cast R.C.C. M25 Kerbing R.M.
9 Oil Paint to Kerbing Stone R.M.
10 Interlocking coloured Concr. Block 200 x 100 x 40 Sq.M.
11 P/L N.P.3 Class Hume Pipes
(a) 200mm dia. R.M.
(b) 300mm dia. R.M.
(c) 450mm dia. R.M.
(d) 600mm dia. R.M.
(e) 750mm dia. R.M.
(e) 900mm dia. R.M.
12 Cast in situ Paving with Grass Slot Sq.M.
13 2mm Thick Thermoplastic Paint Sq.M.
14 150mm thick Concrete Panel Sq.M.
Total of Section - 'L'
Section ‘M: Area Grading and Development
1 Area grading in all types of soil including excavation upto 1.50 mtr. depth Cu.M.
2 Approved Good quality Earth brought from Outside Cu.M.
Total of Section - 'M'
VibeArch Associates. Bharuch
Client Name : Paras Pharmachem. Saykha
Name of Work : Proposed Civil Works for Plant Bulding, Boler House, RM Store, FG Store, UG Tank, Chlorine Shed, Adminstration Bldg, ETP, Road & Ancillary Works
Bill of Quantity
Item No. Description Unit No L B D Qty Total Qty
Section 'A' : Earthwork :
1(A) Excavation in all types of Soil
(a) Up to 1.50 mtr. Depth Cu.M.
For Tank near Lime storage 1
For Tank to West side 1
For Pile Cap of Lime Storage 10
For Pile Cap of MEE Plant 6
For Filter Press Platform 6
For Round Tank 1 1.5
(b) From 1.50 mtr. to 3.00 mtr. Depth Cu.M.
For Tank near Lime storage 1
For Tank to West side 1
For Round Tank 1 1.5
( c ) From 3.00 mtr. to 4.5.00 mtr. Depth
(e) From 1.50 mtr. to 3.00 mtr. Depth Soft Rock Cu.M. QRO
(d) From 1.50 mtr. to 3.00 mtr. Depth Hard Rock Cu.M. QRO
2 Backfilling in foundation with approved materials 0
(a) Selected earth obtained from excavation vide item no. 1 Cu.M.
Ex upto 1.5 Mtr
Pile Caps & Columns
(b) Approved Good quality Earth brought from Outside Cu.M.
(c) Sand (2.6 to 2.8 F.M.) brought from Outside Cu.M.
3 Filling in plinth with approved material
(a) Selected earth obtained from excavation vide item no. 1 Cu.M.
(b) Approved Good quality Earth brought from Outside Cu.M.
Less Available earth
(c) Sand (2.6 to 2.8 F.M.) brought from Outside Cu.M.
4 Dry Stone Metal Soling - 230 mm thk. Cu.M.
For Tank near Lime storage 1
For Tank to West side 1
For Pile Cap of Lime Storage 10
For Pile Cap of MEE Plant 6
For Filter Press Platform 6
For Round Tank 1 0.23
5 Antitermite Treatment. Sq.M.
6 Surface Cutting Sq.M.
13 Under Reamed pile single bulb
(a) 350 mm Dia 5.0 Mt depth from NGL Rmt
For Lime storage 10
For Pile Cap of MEE Plant 7.5
For Filter Press Platform 6
(a) 350mm Dia Rmt 1
Total of Section - 'A'
Section 'B' : P.C.C. / R.C.C. Work :
1 P.C.C. in Foundation and Floor
For Tank near Lime storage 1
For Tank to West side 1
For Pile Cap of Lime Storage 10
For Pile Cap of MEE Plant 6
For Filter Press Platform 6
For Round Tank 1 0.1
For Piles 40 6.5
2 R.C.C. M:25 by batching Plant
(a) For Foundation and up to Plinth lvl. Cu.M.
For Tank near Lime storage
For Tank to West side 1
For Pile Cap of Lime Storage 10
For Pile Cap of MEE Plant 6 0.000 0.000 0.75
For Filter Press Platform 6
For Round Tank 1 0.4
(b) For Superstructure up to 5.00 mtr. Cu.M.
(c) - Do - but from 5.00 to 10.00 mtr. Height
(d) - Do - but from 10.00 to 15.00 mtr. Height
(e) - Do - but from 15.00 to 20.00 mtr. Height
3 Reinforcement 0
(a) Mild Steel Bars. M.T. QRO
(b) High Strength Deformed Bars. M.T. QRO
(c) TMT Bars M.T.
For Foundation and up to Plinth lvl. Cu.M.
For Superstructure 0.00 to 5.0 Mtr. Cu.M.
- Do - but from 5.00 to 10.00 mtr. Height Cu.M.
- Do - but from 10.00 to 15.00 mtr. Height Cu.M.
- Do - but from 15.00 to 20.00 mtr. Height Cu.M.
4 Form work / Shuttering
(a) For Foundation and up to Plinth lvl. Sq.m
For Tank near Lime storage
For Tank to West side 1 0.4
For Pile Cap of Lime Storage 2 0.6
For Pile Cap of MEE Plant 0.000 0.75
For Filter Press Platform 1.25 0.45
For Round Tank 1 0.4
(b) -Do- upto 5.00 Mtr Ht
(c ) - Do - but from 5.00 to 10.00 mtr Ht
(d) - Do - but from 10.00 to 15.00 mtr. Height
(e) - Do - but from 15.00 to 20.00 mtr. Height
5 Precast Reinforced Cement Slab - R.C.C. M:25 Cu.M.
6 Water Proofing admixture in Liquid form. Ltr.
7 Free Flow Non-Shrink Grout. (FOSROC GP-2) Cu.M.
8 25mm thick Premoulded compressible foam for expansion joint filler. Sq.M.
9 Expansion Joint filler. Rmt.
10 Expansion Joint Cover. Rmt.
11 Staging for Direct Ht Cu.M.
Total of Section - `B'
Section 'C' : Masonary Work :
1 Brick Masonary C.M. 1:6 for fdn. and plinth Cu.M.
For Lime Storage
For Pile Cap of MEE Plant
For Filter Press Platform
2 Brick mansonary in C.M. 1:6
(a) Up to 5.00 mtr. Height Cu.M.
(b) -Do- from 5.00 mtr to 10.00 mtr . Height Cu.M.
(c) -Do- from 10.00 mtr to 15.00 mtr . Height Cu.M.
(d) - Do - but from 15.00 to 20.00 mtr Ht Cu.M.
3 Brick Partition Wall - 115mm thk. Sq.M.
4 Extra over item no 1 & 2 for masonry in 1:4 Cement mortar instead of 1:6 Cu.M. QRO
Total of Section - `C'
Section 'D' : Structural Steel Work :
1 Hot Rolled Steel Structure
(i) Fully Welded Structure M.T. 4
(ii) Erection incl. Alignment M.T.
(iii) Applying First Coat Oil Paint M.T.
(iv) Applying Second Coat Oil Paint M.T.
2 RHS / SHS - TISCO Tube Structure 0
(i) Fully Welded Structure M.T. QRO
(ii) Erection incl. Alignment M.T.
(iii) Applying First Coat Oil Paint M.T.
(iv) Applying Second Coat Oil Paint M.T.
4 Foundation Bolts KG 1.2 0.000
5 Cold Rolled Steel Structure M.T.
Total of Section - `D'
Section 'E' : Roofing, Cladding, etc.
1 0.65 mm. thk. Galvalume Color coated plain sheets for accessories
(a) Below 150mm size R.M.
(b) 150mm to 250mm size R.M.
(c) 250mm to 650mm size R.M.
(f) North Light Curve R.M.
(g) Apron Piece R.M.
2 0.47mm thk. Bare Galvalume Sheets for roofing Sq.M.
3 0.47mm thk. Galvalume Color Coated Sheets Cladding Sq.M.
4 4mm Thk Aluminium Foil Insulation Sq.M.
5 Armstrong Acoustical Mineral Fiber False Ceiling-1210 x 610 Sq.M.
6 - Do - but for 610 x 610mm - Bottom Laminated Sq.M.
7 - Do - but for 610 x 610mm - Both Side Laminated Sq.M.
8 G.I. Rain Water Gutter Sq.M.
9 Rain Water Down Take pipe (P.V.C.)
(a) 90mm. Dia. R.M.
(b) 110mm. Dia. R.M.
(c) 125mm. Dia. R.M.
(d) 160mm. Dia. R.M.
(e) 180mm. Dia. R.M.
10 Streamline ridge Ventilators
(a) SRV - 600 R.M.
11 P & F Translucent Roof light sheets 2mm thick plycarbonate corugated Sq.M.
12 Air vent turbine - VERGOLA Ventilator
(a) Model - AV 600 No.
Total of Section - 'E'
Section 'F' : Doors / Windows / Ventilators
1 Box type Door Frame 125mm x 60mm - Pressed Steel Sheets R.M.
2 Fully Glazed Aluminum Door Kgs.
3 35mm thick laminated flush door shutter Sq.M.
4 Aluminum Anodised frame Window.
(a) Fully Glazed Fixed type. Kgs.
(b) - Do - but sliding type 50% opening. Kgs.
(c) Fully glazed Fixed type but fixed glass strips louvers Kgs.
(d) Fully glazed Fixed type but Adjustable glass strips louvers Kgs.
(e) Openable type shutters Kgs.
5 Supplying, providing and fixing of Float glass
(a) 4mm thick Sq.M.
(b) 5.5 to 6mm thick Sq.M.
(c) 8mm thick Sq.M.
(d) 10mm thick Sq.M.
(e) 12mm thick Sq.M.
6 Extra over Item No. 5 for Toughening of Glass.
(a) 4mm thick Sq.M.
(b) 5.5 to 6mm thick Sq.M.
(c) 8mm thick Sq.M.
(d) 10mm thick Sq.M.
(e) 12mm thick Sq.M.
7 Extra over Item No. 5 for Frosting of Glass of any thick Sq.M.
8 Extra over Item No. 2, 4 and 11 for
(a) Extra for Powder Coating Kgs.
(b) Extra for Color Anodizing. Kgs.
9 Hydraulic Door Closer No.
10 Plastic section Doors of Syntex Sq.M.
11 Aluminum Frame Door partially galzed and partially laminated board panel Kgs.
12 Supplying, providing and fixing 10mm thick laminated board. Sq.M.
13 Rolling Shutter - 18 gauge thickness
(a) - Do - with gear arrangement. Sq.M.
(b) - Do - without gear arrangement. Sq.M.
(c) - Do - but with 100% Grill type with gear arrangement. Sq.M.
(d) - Do - but with 100% Grill type without gear arrangement. Sq.M.
(e) - Do - but with 25% of the area to be Grill type with gear arrangement Sq.M.
14 Extra for providing motorized system to
(a) Sliding Door No.
(b) Rolling Shutter No.
15 Aluminium Windows with Double Glass (Domal-40 series) Sq.M.
16 Providing and fixing Acoustics Partitions Sq.M.
17 Fire Proof Door Sq.M.
Total of Section - 'F'
Section 'G' : Plastering
1 20 mm thk. water proof cement plaster. Sq.M.
For Tank near Lime storage
For Tank to West side
2 12 mm thk. Cement Plaster to all surface
(a) 12mm thk Cement Plaster upto Plinth
(b) From plinth to 5.00 mtr. Height Sq.M.
(c) From 5.0 mtr. to 10.0 mtr. Height Sq.M.
(d) From 10.0 mtr. to 15.0 mtr. Height Sq.M.
(e) From 15.0 mtr. to 20.0 mtr. Height
3 Double coat Sand Faced Plaster Sq.M.
For Lime Storage 1 1
Tank Near Lime storage 1 1
Tank to West 1 1
4 6mm thk. Cement Plaster over all R.C.C. Work Sq.M.
5 Extra over Item no 2 for provide (over uncourse / Random rubble masonry) additional plaster thickness of 13mm Sq.M.
6 Extra over Item no 3 for provide (over uncourse / Random rubble masonry) additional plaster thickness of 13mm Sq.M.
Total of Section - 'G'
Section 'H' : Painting
1 Cement Paint Sq.M.
2 Acrylic Distemper Sq.M.
3 Oil bound distemper Sq.M.
4 Weather seal coat exterior quality paint Sq.M.
5 Texturised matt finished paint Sq.M.
6 Acrylic emulsion (Matt & glossy) Paint Sq.M.
7 lime white wash Sq.M.
Total of Section - 'H'
Section 'I' : Flooring / Skirting / Dado
1 Providing and Laying Granolithic Floor
(a) 40mm thick. Granolithic floor. (With out vacuum dewatering ) Sq.M.
(b) 50mm thick. Granolithic floor. (With out vacuum dewatering) Sq.M.
For Lime Storage 1
Tank Near Lime storage 1
(c) 75mm thick. Granolithic floor. (With vacuum dewatering) Sq.M.
(d) 100mm thick. Granolithic floor. (With vacuum dewatering) Sq.M.
(e) 125mm thick. Granolithic floor. (With vacuum dewatering) Sq.M.
(f) 150mm thick. Granolithic floor (With vacuum dewatering) Sq.M.
2 Non Metallic floor Hardner Kgs.
3 Ashford Formula Floor treatment Sq.M.
4 Polyproplylene fibrous reinforcement Kgs.
5 Expansion Joints in the Floor R.M.
6 Reinforcement Bars for Flooring
(a) Mild Steel Bars M.T.
(b) H.Y.S.D. Bars (T.M.T. Tor Steel) M.T.
(c) 3.175mm (10 gauge) 50mm x 50mm weld mesh M.T.
(d) Prefabricated cold rolled welded wire fabric M.T.
7 Isolation Joints R.M.
8 White Glazed Ceramic Tiles - 6mm thk.
(a) In Floors Sq.M.
(b) In Dado Sq.M.
9 Extra for Colored Ceramic Tiles
(a) In Floors Sq.M.
(b) In Dado Sq.M.
10 Extra for Matt finish Colored tiles
(a) In Floors Sq.M.
(b) In Dado Sq.M.
11 Polished Kota Stone Flooring - 30 to 40mm thk. Sq.M.
12 Polished Kotah Stone Flooring - 25 to 30mm thk. Sq.M.
13 Polished Kota Stone 100mm high Skirting fixing by Mortar R.M.
(a) Polished Kota Stone 100mm high Skirting fixing by Adhesiv R.M.
14 P.V.C. Vinyl Flooring - 3 mm thk. Anti static Sq.M.
15 Marble Flooring
(a) Makrana white marble. Sq.M.
(b) For Udaipur / Kesariaji green marble. Sq.M.
(c) Makrana white marble Skirting R.M.
(d) For Udaipur / Kesariaji green marble Skirting R.M.
16 20mm thick Acid resistance tiles Sq.M.
17 False Flooring Sq.M.
18 250 micron PVC Sheet Sq.M.
19 Minimum 10mm thick Vetrified Tiles in floor with 100mm Skirting Sq.M.
20 Polish Kota stone for Staircase and Window Sill Sq.M.
21 Marble for Staircase and Window Sill Sq.M.
22 Stone Cladding
(a) Nimbaheda Rough Stone Sq.M.
(b) 8 to 10mm thick Polish Granite Sq.M.
(c) Red Agra Stone Sq.M.
23 2 mm thk.Self leveling Epoxy Coating Sq.M.
Total of Section - 'I'
Sectiom 'J' : Miscellaneous Items
1 P.C.C. Fillet
(a) 100 x 100mm size R.M.
(b) 150 x 150mm size R.M.
2 100mm thk. Partition with Double Gyp. Board on each face. Sq.M.
3 G.I. Expanded Chain link Jali Sq.M.
4 DORMA Door Sq.M.
5 Breaking of R.C.C. at all levels & Pile Head Cu.M.
6 Breaking of Brickwork and shifting of debris at all levels Cu.M.
7 100mm thk. Partition with Single Gyp. Board on each face. Sq.M.
8 Making & Finishing Openings of any size Sq.M.
9 Making corner fillet 25 x 25mm size in Epoxy modified polymer mortar. R.M.
10 Fixing 450mm dia. Exhaust fan No.
11 Fixing 300mm dia. Exhaust fan. No.
12 Fixing 250mm dia. Exhaust fan. No.
13 India Type waterproofing Sq.M.
14 Red Agra Stone Paving. Sq.M.
15 P & E Structural glazing Sq.M.
16 1800 mm high Barbed Wire Fencing R.M. 1
17 Dumbble Type PVC Water Stopper R.M.
18 Providing and Fixing Aluminum Composite Panel
(a) Total thickness 2.0mm Sq.M.
(b) Total thickness 4.0mm Sq.M.
19 75mm thick Precast M30 Grade Concrete Paver Block Sq.M.
20 Aluminum Nosing angle Kg
21 3mm thick APP & SBS Polymeric Water Proofing Membbrane Sq.M.
22 G.I. "B'' Class Pipe Nozzle with Puddle Flange
(a) 150mm dia x 1000mm Long. No
(b) 200mm dia x 1000mm Long. No
(c) 300mm dia x 1000mm Long. No
23 G.I.Pre painted Sheets Partition Sq.M.
24 2mm thick Polythene or Tarpaulin sheet curtain wall Sq.M.
25 Perforated Pipe P.V.C. 225mm dia R.M.
26 Pebble Filling as Filter media for Rain Harvesting
(a) 40mm to 65mm Cu.M.
(b) 20mm to 30mm Cu.M.
27 Existing Structure Roof sheet & Wall sheet Removing & Staking Sq.M.
28 Existing Steel Structure Member Remove & Stacking M.T
29 Providing and fixing Rebaring
(a) 8mm Bars No
(b) 10mm Bars No
(c) 12mm Bars No
(d) 16mm Bars No
30 Providing and fixing Anchor Fastner
(a) 10mm Bars No
(b) 12mm Bars No
(c) 16mm Bars No
(d) 20mm Bars No
32 Modular merino toilet partition Sq.M.
Total of Section - 'J'
Section 'K' : Sanitary Installation, Water Supply & Drainage
1 White China Water Closet (India type) No.
2 White China Water Closet (Orissa type) No.
3 White China Water Closet Universal (Anglo Indian) Type No.
4 White China Water Closet European Floor mounting type. No.
5 White China Water Closet European wall Hung type. No.
6 Extra for Colured Wall hung European W.C. No.
7 Wash Basin No.
8 Stainless Steel Sink No.
9 Wall Mixer No.
10 Shower rose with Arm No.
11 Wash Basin Mixer Center Hole No.
12 Senso Urinal No.
13 Flat Back Large Urinal
a Single urinal No.
b Two urinal Set No.
c Three Urinal Set No.
14 Marble Partition 1200 x 650 No.
a In Bathroom (Cat.no.107) No.
b In Hand Wash area Sensor Taps (Cat no. 51011) No.
c In W.C. (Cat.no.039) No.
16 Toilet Paper Holder No.
18 C.P.Brass Towel Rail No.
19 Liquid Soap Container No.
20 P/F PVC Soil, waste and vent Pipe
(a) 150 mm Dia. PVC Soil Pipe. R.M.
(b) 100 mm Dia. PVC Iron Soil Pipe. R.M.
(c) 75 mm Dia. PVC Pipe. R.M.
21 PVC Floor Trap 100 mm INLET & 100mm dia. OUTLET No.
22 P.C.C. 1:2:4 around Pipe
(a) 150 mm Dia. PVC Pipe. R.M.
(b) 100 mm Dia. PVC Pipe. R.M.
(c) 75 mm Dia. PVC Soil Pipe. R.M.
23 Painting of G. I. Pipes with 2 coats of bitumastic paint
(a) 15 mm dia nominal bore. R.M.
(b) 20 mm dia nominal bore. R.M.
(c) 25 mm dia nominal bore. R.M.
(d) 40 mm dia nominal bore R.M.
(e) 50 mm dia nominal bore R.M.
(f) 75 mm dia. nominal bore. R.M.
(g) 100 mm dia. nominal bore. R.M.
24 P/F of UPVC Pipes including all fittings
(a) 15 mm dia. Nominal Bore R.M.
(b) 20 mm dia. Nominal Bore R.M.
(c) 25 mm dia. Nominal Bore R.M.
(d) 40 mm dia. Nominal Bore R.M.
(e) 50 mm dia. Nominal Bore R.M.
(f) 75 mm dia. Nominal Bore R.M.
(g) 100 mm dia. Nominal Bore R.M.
25 P/F Brass Full Way Valve with wheel tested on 20 kg/sqm
(a) 15 mm dia. Nominal Bore No.
(b) 20 mm dia. Nominal Bore No.
(c) 25 mm dia. Nominal Bore No.
(d) 40 mm dia. Nominal Bore No.
(e) 50 mm dia. Nominal Bore No.
(f) 75 mm dia. Nominal Bore No.
(g) 100 mm dia. Nominal Bore No.
26 Sintex Water Tank
(a) 500 ltr. Capacity Tank No.
(b) 1000 ltr. Capacity Tank No.
0 (c) 2000 ltr. Capacity Tank No.
(d) 5000 ltr. Capacity Tank No.
27 Stoneware pipe 1.50 mtr. Deep
(a) 150 mm dia. S.W. pipe R.M.
(b) 230 mm dia. S.W. pipe R.M.
(c) 300 mm dia. S.W. pipe R.M.
28 - Do - but below 1.50 mtr. To 3.00 mtr. Depth
(a) 150 mm dia. S.W. pipe R.M.
(b) 230 mm dia. S.W. pipe R.M.
(c) 300 mm dia. S.W. pipe R.M.
29 PVC Pipes of 6 Kg. / Sq.M. - 1.50 mtr. Deep
(a) 160 mm dia. P.V.C. pipe R.M.
(b) 225 mm dia. P.V.C. pipe R.M.
(c) 315mm dia P.V.C. Pipe R.M.
30 PVC Pipes of 6 Kg. / Sq.M. - 1.5 mtr. To 3.00 mtr. Depth
(a) 160 mm dia. P.V.C. pipe R.M.
(b) 225 mm dia. P.V.C. pipe R.M.
(c) 315mm dia P.V.C. Pipe R.M.
31 Stone ware Gully trap No.
32 Manhole Chamber up to 1.50 mtr. Depth No.
33 Extra over above Item for Additional Depth R.M.
34 P / F of C.I. rungs No.
35 P / F Double seal C.I. manhole cover of size 600mmx600mmx100mm No.
36 Constructing of Honeycomb brick mashonry Cu.M.
37 Filling the angular shape brick bats. Cu.M.
38 M.S. Plate Cover No.
Total of Section - 'K'
Section 'L' : Road Work
1 Sub grade preparation incl. Excavation and Rolling Cu.M. 1 0.6
2 Yellow soil filling in layers Cu.M.
3 300mm thick Granular Sub Base Sq.m 1
4 110mm thick Water Bound Maccadam Sq.m 1
5 60mm thick Binder course Sq.M.
6 25mm thk. Wearing Course Sq.M.
7 Seal Coat Sq.M.
8 L Shape Pre cast R.C.C. M25 Kerbing R.M.
9 Oil Paint to Kerbing Stone R.M.
10 Interlocking coloured Concr. Block 200 x 100 x 40 Sq.M. 1
11 P/L N.P.3 Class Hume Pipes
(a) 200mm dia. R.M.
(b) 300mm dia. R.M. 1
(c) 450mm dia. R.M. 1
(d) 600mm dia. R.M.
(e) 750mm dia. R.M.
(e) 900mm dia. R.M.
12 Cast in situ Paving with Grass Slot Sq.M.
13 2mm Thick Thermoplastic Paint Sq.M.
14 150mm thick Concrete Panel Sq.M. 1
Total of Section - 'L'
Section ‘M: Area Grading and Development
1 Area grading in all types of soil including excavation upto 1.50 mtr. depth Cu.M.
2 Approved Good quality Earth brought from Outside Cu.M.
Total of Section - 'M'
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
RAW_HTML
Tender for UGWT (210KL) at dudhdhara dairy.pdf
3.UGWT DETAIL-3.pdf
2.UGWT DETAIL-2.pdf
1.UGWT DETAIL-1.pdf
BOQ FOR UGWT.xls
XLS
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .