Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Infra Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹33.5 LAccepted-AOC 18 MOTI BAGH BABYAL ROAD AMBALA CANTT 133001 | AMBALA CANTT | AMBALA | HARYANA | 133001 | L1 | Accepted-AOC ACCEPTED LOWEST BIDDER L1 | |
| 2 | L2₹34.6 L+₹43,948.50 (1.29%)Rejected-Finance | L2 | Rejected-Finance Being rejected L2 | |
| 3 | L3₹35.9 L+₹1.8 L (5.23%)Rejected-Finance H 45 MAHESH NAGAR AMBALA CANTT 133001 HARYANA | AMBALA | HARYANA | 133001 | L3 | Rejected-Finance Being rejected L3 | |
| 4 | L4₹38.8 L+₹4.7 L (13.7%)Rejected-Finance | L4 | Rejected-Finance Being rejected L4 | |
| 5 | L5₹42.5 L+₹8.4 L (24.6%)Rejected-Finance | L5 | Rejected-Finance Being rejected L5 |
Tender Value
₹47.4 L
EMD Value
₹94,842
Closing Date
15 Jan 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
SHRI ABHINANDAN KUMAR MISHRA EE IDSE
GE (SOUTH) AMBALA CANTT
CA NO GE (SOUTH) AMB 64 2023 2024 SPL REPAIR TO BLDG NO HT 02 (KOTA) UNDER GE (SOUTH) AMBALA CANTT
2023_MES_632988_1
GE(SOUTH)/AMB-64/2023-2024
Open Tender
Civil Works
Item Rate
180 days
GE (SOUTH) AMBALA CANTT
AS PER NIT
9 documents required · 9 mandatory
₹500
GE (SOUTH) AMBALA CANTT
₹94,842
Yes
7 Mar 2024
15 Dec 2023
17 Jan 2024
15 Dec 2023
15 Jan 2024
1 Jan 2024
15 Dec 2023 - 28 Dec 2023
Amount
Demolition of mud pushka in roofs, any thickness, including plastering and leeping (whether full thickness removed or only a part thereof) and removal of the same outside defence land complete all as specified and directed.
Dismantling of brick or terracing tiles of single layers on roofs and removal from site, including preparing slab surface with wire brushing and cleaning the roof surfacs with water including flashings and junction of parapets complete all as specified and directed.
Matrerial and labour for 50mm thick PCC 1:2:4 type B-1 using 12.5mm graded stone aggregates mixed with and including WPC @2% by weight of cement as in levelling course etc., including roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust,etc. and brushing the surface with neat cement slurry @ 3.0kg of cement per square metre and bedding layer of 10 mm thick cement plaster in CM 1:4 on RCC roof slab complete all as specified and directed.
Matrerial and labour for 40mm thick brick tiles, bedded in 15mm thick cement mortar (1:6) and joints grouted in flush in cement mortar (1:3) mixed with 5% of crude oil by weight of cement including dismantling of brick tiles or terracing tiles, single layer on roofs including old tarfelt and bedding under it complete all as specified and directed.
Material and labour for APP polymeric water proofing treatement to roof using membrane minimum 3 mm thick and weighting not less than 3.6 kg/sqm , black finish reinforced with non-woven polyster matt (Weight not less than 150 gms/Sqm) with thermo fusible finish laid by force application after applying compatible bitumen primer at the rate of 0.40 Ltr per Sqm, by the same membrane manufacturer of density 0.87 to 0.89 kg/ltr at 25' C temprature and viscosity 70-160 cps over the primer coat, torching over laps with a propane or butane gas torch with a over lap of 100 mm at the side and 150 mm at the ends and sealing including a tack coat of hot blown bitumen 85/25 @ 1.2 Kg/Sqm below APP complete all as specified and directed. NOTES : - (i) The water proofing treatment shall be got carried out by the manufacturer or their authorised applicators duly approved by GE in writing. (ii) 5% amount of the total amount of water proofing treatment shall be retained as a guarantee and shall be released after 10 years. However contractor may deposit the FDR of same amount in favour of GE. If contractor fail to rectify the defect pointed out during this period in writing, the defect shall be got rectified at contractor' risk and cost and the payment shall be made from the amount kept reserved or by encashing the FDR deposited by the contractor as guarantee. Contractor's quoted rate for this item shall deemed to be inclusive of this aspect.
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) and removing debries out side defence area complete all as specified and directed.
Material and labour for premium quality (of approved class, colour and design/shade), joint free, non skid coloured ceramic tiles, area of each tile exc 0.18 sqm but not exceeding 0.38 sqm, 7 to 8 mm thick as in floors etc, set and jointed in neat cement slurry @ 3.00 kg/square metre and pointed in white or coloured cement to match the shade of tiles over and including 15mm thick screed bed or bedding layer in cement mortar (1:4) complete all as specified and directed.
Material & labour for premium quality coloured glazed ceramic tiles (of approved class, colour and design/shade) of size 450 x 350 x 7 to 8 mm thick in vertical surfaces and jointed in neat cement slurry @ 3.00 kg/square metre and pointed in white or coloured cement to match including rendering 10mm thick in cement plaster 1:3 complete all as specified and directed.
Material and labour for premium quality (of approved class, colour and design/shade), light shade vitrified ceramic tiles 9 to 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed as in neat, neat cement slurry @ 3.00 kg/square metre and pointed in white or coloured cement to match the surface over and including 15mm thick screed bed or layer in cement mortar (1:4) complete all as specified and directed.
Material and labour for premium quality (of approved class, colour and design/shade), light shade vitrified ceramic tiles 9 to 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm as in vertical surfaces such as dado, skirting, set and jointed in neat cement slurry @ 3.00 kg/square metre and pointed in white or coloured cement to match the surface over and including 10 mm thick rendering in cement mortar (1:3) complete all as specified and directed.
Material and labour for machine cut kota stone slab 18-20 mm thick for staircase steps in single piece, over and including cement screed bed 15 mm thick in cement mortar (1:3) and set and jointed in neat cement slurry @ 3.00 kg/Sqm and pointed in white or coloured cement to match the surface mixed with pigment to match shade of the slab including cutting, waste, rubbing and polishing (Mirror finish) complete including provn of two Nos 3x3mm grooves at tread of each step complete all as specified and directed.
Material and labour for machine cut kota stone slab 18-20 mm thick on vertical surfaces like riser of steps, skirting in single piece, over and including cement screed bed 10 mm thick in cement mortar (1:3) and set and jointed in neat cement slurry @ 3.00 kg/Sqm and pointed in white or coloured cement to match the surface mixed with pigment to match shade of the slab including cutting, waste, rubbing and polishing (Mirror finish) complete all as specified and directed.
Material and labour for 20 to 25 mm thick granite stone of any colour (of any type) work (table rubbed, polished & moulding), as in floors, cooking platforms and like bedded with and including 15 mm thick screed bed in CM (1:4) and jointed with grey cement slurry @ 3 Kg/Sqm, and pointed with white with admixture of pigment to match with shade of granite stone including grinding and polishing and rounding to edges of stone slabs one edge etc complete all as specified and directed.
Material and labour for 18 to 20 mm thick baroda green marble (of any type) work (table rubbed, polished & moulding), as in floors, cooking platforms and like bedded with and including 15 mm thick screed bed in CM (1:4) and jointed with grey cement slurry @ 3 Kg/Sqm, and pointed with white with admixture of pigment to match with shade of granite stone including grinding and polishing and rounding to edges of stone slabs one edge etc complete all as specified and directed.
Demolition of brickwork or stone/ boulder masonry, built in cement mortar including all quoins, arches, pillars, etc complete all as specified and directed.
Material and labour for brick work with sub class 'B' (old size) bricks, straight or curved on plan, exceeding 6 mtr mean radius built in CM 1:6 complete all as specified and directed.
Material and labour for brick work with sub class B bricks of old size, straight or curved on plan to any radius as in half brick thick walls, built in cement mortar 1:4 complete all as specified and directed.
Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for (reinforcement cut as required to faciliate demolition) as in existing RCC tanks etc complete all as specified and directed.
Material and labour for providing reinforced cement concrete 1:2:4 type B1 (using 20mm graded mechanically crushed stone aggregate) as in chajjas, fascia and the like etc complete all as specified and directed.
Material and labour for mild steel TMT bars 8mm dia and over, cut to length, bent to shape required, including cranking , bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all directed
Material & labour for use & waste for formwork to chullah hoods, chajja’s, troughs and similar items including edges of fair finished surface of concrete complete all as specified and directed.
Material and labour for cutting holes into or through brick walls built in cement mortar and making good in cement mortar 1:3 or cement concrete 1:2:4 type B-l as required superficial area not exceeding 150 sq.cm complete all as specified and directed.
Material and labour for cutting openings, through brick walls built in cement mortar for door, window and other openings or enlarging existing openings. converting window into door openings, etc. or cutting out defective brick work for under-pinning, including providing, fixing and removing shoring, cleaning and stacking bricks, removing surplus serviceable bricks, hard-core, etc. to store and rubbish not exc. 50m complete all as specified and directed.
Material and labour for forming jambs, etc. to openings (to foregoing item), including cutting, toothing and properly bonding into old work in cement mortar 1:6, also facing, jointing and pointing to match existing work, complete complete all as specified and directed.
Taking down cement plaster of any description and in any position including raking out joints, hacking for key, scrubbing down with water etc of any thickness complete all as specified and as directed.
Material and labour for preparation of exposed brick wall surface by cleaning the surface wire brush to remove all dirt/loose materials from the bricks and from the joints between the bricks. Prepared surface should be then washed with diluted HCL acid (dilution ratio of 1:50) for three times in a day for two days. After acid wash surface should be allowed to be air dried for one day. NOTE : - Further treatment over the surface so achieved will be carried out only after approved of the same by GE.
Material and labour for 15mm thick rendering in cement mortar (1:6) on surface of any description of brick or concrete and finished the surface even and smooth without using extra cement complete all as specified and directed.
Material and labour for 15mm thick rendering in cement mortar (1:4) on surface of any description of brick or concrete and finished the surface even and smooth without using extra cement complete all as specified and directed.
Material and labour for rough cast plaster with and including 15mm thick rendering in CM 1:3 on brick wall or concrete surface as specified in clause 14.22 of SSR Part-I complete all as specified and directed. Note:-(i) After applying the under coat of cement and sand mortar 1:3 not less than 10 mm thick and while it is still in plastic state the rough cast mixture consisting of crushed stone or fine gravel aggregate (which is generally of size between 6 to 12 mm depending on the texture required) mixed with coarse sand and cement in the ratio of 1: 1: 1 shall be applied and finished even. (ii) The mix of cement and sand shall be made slightly loose/wetter than normal for rendering to ensure that larger aggregates are thoroughly covered. (iii) Contractor's quoted rate shall include all above provisions and no extra shall be admissible on this account.
Material and labour for 5mm thick cement plaster in CM (1:3) to ceiling surface and finished the surface even and smooth without using extra cement with and including applying two coats of oil bound distemper over a coat of primer applying with roller including necessary scaffoldings etc on ceilig complete all as specified and directed.
Material and labour for preparing surfaces plastered old surfaces on ceiling and applying two coats of oil emulsion distemper complete as all specified and directed.
Material and labour for preparation of new plastered surface of two coats distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete over a coat of wall care putty not less than 1mm thick as per manufacture instructions, complete all as specified and directed.
Material and labour for complete removal of existing treatment of old decorated plastered or unplastered surfaces of walls and applying two coats distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete over a coat of wall care putty not less than 1mm thick as per manufacture instructions, complete all as specified and directed.
Taking down chowkats or frames with shutter, area not exceeding 1.50 Square metre (w/o taking off shutters from frames) and removing from site, including cutting holes in wall/concrete for taking out existing hold fasts and making good the disturbed portion of jambs and adjoining surfaces in CM (1:3) and finishing the surfaces to match with existing finish complete all as specified and directed. (Note – The qouted rate shall be deemed to include for fixing of hold fast in the same opening irrespective of position of hold fasts and no separate item for making good of hold fasts shall be paid).
Taking down chowkats or frames with shutter, area exceeding 1.50 Square metre but not exceeding 4 Square metre (w/o taking off shutters from frames) and removing from site, including cutting holes in wall/concrete for taking out existing hold fasts and making good the disturbed portion of jambs and adjoining surfaces in CM (1:3) and finishing the surfaces to match with existing finish complete all as specified and directed. (Note – The qouted rate shall be deemed to include for fixing of hold fast in the same opening irrespective of position of hold fasts and no separate item for making good of hold fasts shall be paid).
Supply and fixing of pressed steel frames for doors of size 125 x 60mm, 1mm thick, with one or more rebates including, hold fasts of 25mm x 4mm FI, 25cm long, 6 Nos in each chowkhat, necessary lugs, 6 Nos 100 mm MS butt hinges medium weight, cold rolled, welded for each shutters of frame, lock strike plate, including sanding, tarring backs of chowkhats, PCC 1:3:6 type C-0 filling in frame, 2 Nos 12 mm dia MS tie bars at the bottom of frame and one shop coat of red oxide primer etc complete all as specified and as directed.
Supply and fixing of pressed steel frames for doors of size 105 x 60mm, 1mm thick, with one or more rebates including, hold fasts of 25mm x 4mm FI, 25cm long, 6 Nos in each chowkhat, necessary lugs, 3 Nos 100 mm MS butt hinges medium weight, cold rolled, welded for each shutters of frame, lock strike plate, including sanding, tarring backs of chowkhats, PCC 1:3:6 type C-0 filling in frame, 2 Nos 12 mm dia MS tie bars at the bottom of frame and one shop coat of red oxide primer etc complete all as specified and as directed.
Material and labour 2nd class hardwood factory made 35mm thick glazed skelton shutters, open rebated and prepared to receive glass, gauge etc. divided into squares edges of framing, plain, chamfered or rounded, mitred fitted with cut and mitred beads for securing glass/gauge etc. with sizes of members of shutters as specified in SSR part-I section 8 clause 8.24(a) supplt and fixed to choukats complete all as specified and directed.
Supply and fixing of factory made flush shutters 40 mm thick, solid core construction, with block board core and plywood face panels, commercial type on both sides, ISI marked complete all as specified and as directed
Supply and fixing factory made PVC hollow door frame of size 50 mm x 47 mm with wall thickness of 5 mm made out of extended 5 mm rigid PVC foam sheet cut at corner and jointed with 02 Nos., 150 mm long brackets of size 15 mm x 15 mm mild steel square tubes 19 gauge including vertical door profiles reinforced with 19 mm x 19 mm steel square tube of 19 gauge (EPDM) rubber gasket weather seal provided through out the frame and fixed to wall with 65/100 mm long mild steel screws through the frame by using PVC fasteners (minimum of 04 Nos. of screws to be provided for each vertical number & minimum 02 Nos. for horizontal member), complete all as specified and directed.
Supply and fixing of factory made solid PVC moulded door shutter with wood free EPS, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site with 03 Nos extruded aluminium alloy butt hinges 100mm, 02 Nos aluminium tower bolt 150 mm, 02 Nos aluminium handle 150 mm for each shutter all as per specification & drawing complete all as specified and directed
Supply and fixing of extruded aluminium alloy handles, fabricated type, anodized of size 150 mm long complete all as specified and directed.
Supply and fixing of aluminum anodized, barrel tower bolts of extruded section 200mm long complete all as specified and directed.
Supply and fixing of 300 mm aluminum anodised sliding door bolt, ISI marked, with hasp, staple (bolt type) complete with clamps bolt not less than 16mm dia and fixing clips of sheet, cast or extruded section and fixing bolts an sliding bolt of extruded section or cast aluminum alloy, complete all as specified and as directed.
Material and labour for preparation of new or previously untreated wooden surfaces of any description, not other wise described over 10cm width or girth and apply two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.
Material and labour for preparation of new steel surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint complete all as specified and directed.
Supply and fixing of factory made uPVC white colour fixed glazed window/ventilator made of (small series) frame 47 x 50 mm mullion 47 x 68 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension (Area upto 0.75 sqm.) comprising of uPVC multi-chambered frame and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, G.I. fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Glass shall be paid separately). Note: For uPVC frame, sash and mullion extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable.Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. (Note: The unit rate quoted by contractor includes cost of glass/wire mess and includes all other connected accessories including locking arrangement.
Supply and fixing of factory made uPVG white colour Sliding window Three track made of extruded profiles with wall thickness of 2.3mm (+ -0.2mm). Window profile with hollow section with multi chamber. Frame (88mm x 52mm), sliding sash (42mm x 67mm). Slidingmesh Sash (42mm x 57mm) Sliding interlock (One vertical length in each shutters) (45.5mm x 28mm),Glazing bead (24.5mm x 16mm) will be miterd cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware.EPDM gasket, 1.2+ -0.2mm thick galvanised steel Frame (30mm x 18mm) 2 nos, sliding sash (30mm x 18mm), sliding mesh sash (26mm x 10mm) profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners, Hardware [Touch Lock of zinc alloyed (white powder coated),steel roller system. Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and required accessories area not exceeding 2.00 sqm each (Note: The unit rate quoted by contractor includes cost of glass/wire mess and includes all other connected accessories including locking arrangement.
Material and labour for 4.8 mm thick sheet black/dark glass ordinary quality and glazing n exceeding 0.50 Sqm in each pane fixed with including rubber gasket in aluminium frame work complete all as specified and directed.
Material and labour for 4.8 mm thick sheet glass one side frosted and glazing n exceeding 0.50 Sqm in each pane fixed with including rubber gasket in aluminium frame work complete all as specified and directed.
Supply and fixing of 0.56 mm dia MS galvanised wire cloth with average width of aperature 1.4 mm and fixed with tinned tacks or galvanised wire staples complete all as specified and directed.
Supply and fixing in repair of rubber strips 3 to 4mm thick & 65mm to 75mm wide fixed on bottom rail of door for covering gaps between door & floor to aviod entry of insects, dust etc complete all as specified and directed.
Supply and fixing in repair of aluminium pre coated of choice colour designed type 25 mm tubular rod in curtain rod, 1.6mm fancy type including PVC golden colour brakets, latto and wall to wall socket etc., complete all as specified and directed.
Supply and fixing in repair of mild steel helical door spring 150 mm long fixed with screws to wooden chowkhats or welding to steel chowkhats, complete all as specified and directed.
Supply and fixing in repairs of mild steel almirah shutters with frame, exceeding 1.5 Square metre, made of 20 gauge mild steel sheet in two leaves as built in furniture in cupboards including locking arrangement with mortice lock of mild steel, vertical type, 65mm size, 2 lever, ISI marked with duplicate keys and handle, etc. all as per Godrej pattern including two coats of spray painting over a coat of red oxide primer complete fixed on brick or concrete wall with minimum six numbers of 10mm dia and 100mm long mild steel bolt with washer and nut in cement mortar (1:4) or PCC 1:2:4, type B-0, complete all as specified and directed.
Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for (reinforcement cut as required to faciliate demolition) complete all as specified and directed.
Supply and fixing in repair of steel tube 40 mm bore, medium grade galvanized, ISI marked as in spout and making good with PCC to old existing surface complete all as specified and directed.
Material and labour for PCC 1:5:10 type E-2 using 40mm graded mechanically crushed stone aggregate as in foundation filling, mass concrete, sub base of floor and under sunken floor etc complete all as specified and directed.
Material and labour for water proofing treatment of sunken floor of WCs, bathroom, etc by applying of the following specifications and sequence with and including 40mm thick PCC 1:2:4 type B-1 using 20mm graded stone aggregate as in floor rough finishes complete as specified and directed:- (i) Cleaning of sunken floor surface with mechanical means i.e. wire brush/air blower etc. and remove all loose /unsound material, dirt, dust etc. (ii) Applying cement slurry mixed with acrylic based polymer moodified cementitous composite compound coating. (iii) First layer of cement slurry @ 0.488Kg/sqm mixed with acrylic based polymer moodified cementitous composite compound @0.253 Kg/ Sqm and allow it to air dry for 04 hours. (iv) Second layer of cement slurry @ 0.242 Kg/sqm mixed with acrylic based polymer moodified cementitous composite compound @0.126 Kg/ Sqm and allow it to air dry for 04 hours followed with water curing for 48 hours. (v) 200 micron thick polythene film shall be pasted with help of adhesives over treatment. Note- Joints of WC/ Trap/ Soil waste shall be properly sealed with sealing compound. Testing of all traps and joint and sunken slab shall be done as per IS-1742 before filling and tiling work.
Material and labour for 75mm thick PCC 1:3:6 type C-2 using 40 mm graded mechanically crushed stone aggregates as in sub base, finishing the surface even and rough to receive floor etc complete all as specified and directed.
Supply and fixing of GI tubing, ISI Marked, 15mm bore, `medium grade, with all fittings and fixed to walls and ceilings or laid in floors including necassary cutting/chasing/pinning in wall and making good the disturbed surfaces as per existing wherever required, including taking down of old tubing as existing at site and removal, complete all as specified and as directed.
Supply and fixing of GI tubing, ISI Marked, 20mm bore, `medium grade, with all fittings and fixed complete to walls or laid in floors/roofs etc including necassary cutting/chasing/pinning in wall if required and making good the disturbed surfaces as per existing wherever required, including taking down of old tubing as existing at site and removal, complete all as specified and as directed.
Supply & fixing of 15mm fancy type, chromium plated, angle cock, cast copper alloy, screwed down high pressure with crutch or butterfly handle, heavy with adjustable wall flange, complete all as specified and directed.
Supply and fixing in repair of stop valve 20mm dia, chromium plated, cast copper alloy, screwed down, high pressure with crutch or butter fly handle, screwed both ends for iron pipes or unions, complete all as specified and as directed.
Supply and fixing of chromium plated bib tap screwed down high pressure, long body, cast copper alloy, chromium plated` with crutch or butterfly handles screwed down suitable for 15mm bore pipe or union, complete all as specified and directed.
Supply and fixing in repair of fancy type chromium plated wall mixer (Hot & old), cast copper alloy, with capstan heads, screwed down high pressure with long screwed shanks and fly nuts, screwed for iron pipe and fixed bore of pipe 15 mm, complete all as specified and directed.
Supply and fixed in repair of vitreous china wash down water closet pedestal pattern (EWC), White including connection to trap and to flushing pipe with ‘P’ or ‘S’ trap, making good to floor, plastic water closet seat cover with mild steel chromium plated hinges and chromium plated jet spray with 1.5 meter flexible LDPE pipe jointed with pipe complete all as specified and directed.
Supply and fixing in repair of 10 litre capacity virgin polypropylene cistern, white at low level complete with 32 mm bore PVC flush pipe of suitable length, PVC connection 450 mm long having PTMT nuts including bracket and making all connections and making good the disturbed surfaces in cement mortar (1:3) to match with the existing surface, complete all as specified and directed.
Supply and fixing in repair of vitreous china wash hand basin white flat back of size 550x440mm including CI brackets and 15mm chromium plated centre hole WHB mixer, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, PVC connection 450 mm long having PTMT nuts and 32 mm dia brass chromium plated waste coupling and making good to disturbed portion including 32 mm dia PVC waste pipe etc., complete all as specified and directed.
Material and labour for 40mm bore low density polythelene pipe (LDPE) of pressure rating 6Kgf/Sqcm complete fixed to walls, ceiling or laid in floors etc fixed in repair complete all as specified and directed
Supply & fixing in repair of sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12mm wide and chromium plated brakects guard and railing 60cm long complete all as specified and directed.
Supply and fixing of sheet glass corner assembly consisting of 5.5mm thick sheet glass shelf 300mmx300 mm with chromium plated bracket guard and railing complete fixed in repair all as specified and directed.
Supply and fixed in repair of chromium plated brass towel rail 20 mm dia & 600 mm long including a pair of CP brackets fixed with plastic rawl plugs & CP screws fixed in repair complete all as specified and directed.
Supply and fixing in repair of brass CP toilet paper holder, recessed type, fixed to wall with brass CP screws complete all as specified and directed.
Supply and fixed in repair of soap dish, any type, fixed to plugs with chromium plate brass screws complete as specified and directed.
Supply and fixed (in repair) of CP Hand shower (Health faucet) shower including 1.50 meter long flexible tube complete all as specified and directed.
Supply and fixing in repair of PVC coloured bathroom cabinet overall size 500 x 400 mm decorative design with looking mirror, nepkin rail complete all as specified and as directed
Supply and fixing in repair of fancy type, shower rose 125mm size with swivel joints, brass chromium plated, revolving type, fixed to existing steel pipe or union 15mm bore complete all as specified and as directed.
Material and labour in repair for 100 mm dia circular grating stainless steel chromium plated fixed on trap loose or with cement motor 1:6 complete all as specified and directed.
Supply and fixing of water storage tank of 500 ltr capacity, HDPE triple layer, cylindrical, vertical with closed top and FDA approved, 100% UA stabilized, rust proof, ISI marked, fixed and hoisted in position on staging or roof complete with locking arrangement including over flow pipe, air lock pipe, brass valve 20 mm high pressure with polythene float and flynut, ISI marked, screwed and suitable for iron pipe 20 mm bore including taking down of old tank of any descrption and removal from site complete all as specified and directed. Note:- Make of tank shall be engraved on the tank.
Cleaning and removing all scale and dirt, etc from existing water storage tanks of capacity exceeding 250 litres and not exceeding 500 litres by emptying, drying and cleaning the tank by scrubbing the dust with wire brush from tank including cleaning from mouths of circulating pipes, to entire satisfaction of Engr-in–charge of cleaning, including writing date of cleaning with oil paint of of visible colour in font size not less than 100 mm high complete all as specified and directed. (The rates includes for disconnecting of existing water tank, lowering if required and hoisting, reconnecting and refixing in same position after cleaning ) NOTE: - (i) The whole process of disconnecting, reconnecting and refixing in same position after cleaning shall be done on the same day, if failing so, Rs. 100/- shall be deducted for each tank per day from the contractor due. (ii) A separate register to be maintained by contractor for cleaning and occupant signature with date to be obtained in it.
Supply and fixing of LEAD FREE PVC Celuka ply 18mm thick (Minimum density 600kg/Cum) of both side plain white colour, fixed with stainless steel screws, solvent cement /adhesive to make kitchen /bed rooms cabinet sides top, bottom and shelves inside the cabinet complete as per manufacturer’s specifications complete including dismantling boarding, any description, fixed in any position with nails etc; complete all as specified and directed.
Supply and fixing of LEAD FREE PVC Celuka ply 18mm thick (Minimum density 600kg/Cum) of single side rigid lamination of approved colour and other side plain white colour, fixed with stainless steel screws, solvent cement /adhesive to make kitchen cabinet shutters and shelves complete as per manufacturer’s specifications complete including dismantling boarding, any description, fixed in any position with nails etc; complete all as specified and directed.
Supply and fixing of 12mm thick LEAD FREE PVC Celuka ply (Minimum density 600kg/Cum) of fixed with stainless steel screws, solvent cement /adhesive to make wall mount kitchen cabinet back and pull out drawer sides complete as per manufacturer’s specifications complete including dismantling boarding, any description, fixed in any position with nails etc; complete all as specified and directed.
Supply and fixing in repair of stainless steel 304 grade wire basket cutlery of size 370 x 485mm premium quality fixed in position complete all as specified and directed.
Supply and fixing in repair of stainless steel 304 grade wire basket (average weight 2.5 to 4 Kg per Basket) of pull out type like plain /cup & saucer /bottle /multi purpose /2–3 shelf basket etc for kitchens of required size fixed in position complete all as specified and directed.
Supply and fixing in repair of ball bearing runners 45mm telescopic (KTS–20) full extension load capacity minimum 50Kgs complete all as specified and directed.
Supply and fixing in repair of ‘D’ type cabinet handles premium quality, stainless steel grade 304, gloss chrome, SN finished 150mm long matt finished complete all as specified and directed.
Supply and fixing of auto closing hinges of size 35mm of 0 crank (KH–001) of 8 crank (KH–002) openable at 110 degree for kitchen cabinet shutters complete in all respect and fixed in position complete all as specified and directed.
Supply and fixing in repair of stainless steel plate rack 1mm thick of size 900mmx900mm x 200mm fixing with rawl plug and steel screws of weight not less than 8 kg each, complete all as specified and as directed.
Supply and fixing in repair of stainless steel sink with drainage board 1.00 mm thick, ISI marked for kitchen with plug, washers and wastes, including bedding in cement mortar on to dwarf wall or fixing contilever brackets of suitable angle iron, CP brass waste coupling, superior quality PVC waste pipe and connecting union to pipe, over all size 915mm x460mm, bowl size 410mm x 330mm x160mm complete all as specified and directed.
Supply and fixing of PVC (SWR) 110 mm pipe single socket in any length with rubber ring joints fixed to wall with MS clamps etc or in floors including dismantling of pipes of any description any length complete all as specified and as directed.
Supply and fixing of PVC (SWR) 75 mm pipe type socket in any length with rubber ring joints fixed to wall with MS clamps etc or in floors including dismantling of pipes of any description any length complete all as specified and as directed.
Supply and fixing in repair of 110 mm bore PVC (SWR) plain bend any radius including jointing with solvent cement, complete all as specified and as directed.
Supply and fixing in repair of 75 mm bore PVC (SWR) plain bend any radius including jointing with solvent cement, complete all as specified and as directed.
Supply and fixing in repair of 75 mm bore PVC (SWR) plain bend any radius with access door including jointing with solvent cement, complete all as specified and as directed.
Supply and fixing in repair of 110 mm bore PVC (SWR) junction single T (equal or unequal) with access door, including jointing with solvent cement, complete all as specified and directed.
Material and labour for salt glazed stoneware gully trap, square or round moulded type 'P', 100x100mm size complete all as specified and directed.
Material and labour for 50 mm thick PCC 1:3:6 type C1 (using 20 mm graded crushed stone aggregate) as in plinth protection finished fair and even smooth without using extra cement complete all as specified and directed. Note:- The plinth protection shall be laid in panels and lenth of each panel shall not be more than 2.50 m and at every turning and 10mm joints filled with 85/25 grade bituman and sand mixture in the ratio (1:3) shall be provided.
Material and labour for precast RCC 1:2:4 Type B-1 (using 20 mm graded crushed stone aggregate) as in manhole covers, including necessary form work etc, set and jointed in CM 1:4 complete including demolition of existing RCC work etc complete all as specified and directed. (Note: Reinforcement shall be measured and paid separately under respective items of this BOQ)
Dismantling wrought iron or mild steel work of any description not otherwise provided for purlin/rafters, framed truss etc complete all as specified and directed.
Material and labour for providing and injecting chemical emulsion for post constructional antitermite treatment along external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc. in apron complete all as specified and directed
Material and labour for providing and injecting chemical emoulsion for post constructional ATT of soil under existing floors using emulsion @ one litre per hole, 300mm apart including drilling and plugging 12mm dia holes with cement mortar 1:2 (1 cement: 2 coarse sand) to match the existing floors complete all as specified and directed.
Material and labour for providing and injecting chemical emulsion for post constructional ATT at points of contact of wood by chemical emulsion (in oil or kerosene base solution) @ 0.5 litre per hole, by drilling and plugging 6mm dia holes at a downward angle of 45 degree at 150 mm centre to centre and sealing the same complete all as specified and directed Note for item No 104 to 106:- (i) The ATT work shall be carriedout through specialised agency as approved by GE in writing and chemical used shall be approved before execution of work. (ii) 5% amount of the total amount of ATT shall be retained as a guarantee and shall be released after 10 years. However contractor may deposit the FDR of same amount in favour of GE. If contractor fail to rectify the defect pointed out during this period in writing, the defect shall be got rectified at contractor' risk and cost and the payment shall be made from the amount kept reserved or by encashing the FDR deposited by the contractor as guarantee. Contractor's quoted rate for this item shall deemed to be inclusive of this aspect..
Supply and fixing of rolled mild steel in roof trusses (framed), trussed rafter/purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc fixed in position, conforming to Fe-410-W (Gde 250), complete all as specified and directed.
Supply and fixing of mild steel plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, with riveted, bolted or welded attachment conforming to grade Fe-290 (Gde E-165), complete all as specified and directed.
Supply and fixing of pre-painted galvalume, aluminuim zinc coating, GI based corrugated steel sheet, 0.50mm thick, conforming to IS-15961, of any approved colour, having tensile strength of 550 MPa, as in roof covering/cladding to wall, fixed with self tapping screws or J type hooks including rubber washer etc including taking down of old AC/CGI etc sheets of any descriptions as existing on site complete all as specified and as directed. Note- The sheets shall have super durable polyester quality paint of approved colour, 150 gm/sqm total on both sides, suitable for exterior application conforming to IS-15965.
Supply and fixing for pre-painted galvalume, aluminuim zinc coating, GI based plain steel sheet, 0.50mm thick, conforming to IS-15961, of any approved colour, having tensile strength of 550 MPa, as in roof covering/cladding to wall, fixed with self tapping screws or J type hooks including rubber washer etc including taking down of old AC/CGI etc sheets as existing on site complete all as specified and as directed. Note- The sheets shall have super durable polyester quality paint of approved colour, 150 gm/sqm total on both sides, suitable for exterior application conforming to IS-15965.
Supply and fixing of 5 to 8 mm thick plain colour PVC sheet hollow interlocking wall panelling of width 250 mm for wall panelling inclusive of fixing on wall with screws and solvent alongwith PVC 'U' and 'L' beading at corner and end portion where ever required of matching colour complete all as specified and as directed. NOTE : - Unit rate quoted against this item shall also includes taking down and refixing the same of any electrical board, switch, sockets, light and fittings, fans etc after carrying out necessary relevant work and making good to match with existing surface effected for this area etc complete all as specified and directed.
Surface excavation not exceeding 30 cm deep and averaging 15cm deep and getting out in soft/loose soil complete all as specified and directed.
Removing excavated material to a distance exc 1.5 KM but n.exc 5 KM and deposited where directed and levelled & filled in, spreading levelling in layers n. exc 25 cm thick as specified and directed.
Demolition of cement concrete in ground floors and pavings not exceeding 15 cm thickness (below or above ground level) complete all as specified and directed.
Material and labour for 100mm thick PCC 1:4:8 type D-2 using 40 mm graded mechanically crushed stone aggregates as in foundation, sub base and mass concrete complete all as specified and directed.
Material and labour for providing and laying factory made PVC moulded, any approved coloured with grey cement and red pigment, glossy finished, vibrated machine pressed precast conctete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade, over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand; complete all as specified & as directed. Note:- Size and shape of interlocking tile shall be approved by GE
Material and labour for providing and laying factory made PVC moulded, any approved coloured with grey cement and red pigment, glossy finished, vibrated machine pressed precast conctete interlocking paver block any shape and size confirming to IS 15658-2006 of 80 mm thickness, M-40 Grade, over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand; complete all as specified & as directed. Note:- Size and shape of interlocking tile shall be approved by GE
Material and labour for PCC 1:2:4 type B-1 (using 20 mm graded mechanically crushed stone aggregate) as copings, bed plates, kerbs, benching, roof kerbs, on edge for sealing interlocking tiles and other bands and the like, finished the surface fair and even, including necessary form work etc complete all as specified and directed.
Material and labour for preparation of new plaster surfaces of walls chajjas and applying two coat of 100% anti fungle acrylic exterior emulsion paint in approved shed over a coat of primer including necessary scaffolding complete all as specified and directed.
Material and labour for complete removal of existing treatment by brooming down on surfaces of walls etc. by steel wire brushes and scarping down smook moulds efflorcient salt and treating oil and greasy spots including washing down etc. applying two coat of 100% anti fungle acrylic emulsion paint in approved shed over a coat of acrylic resistant primer complete all as specified and directed.
Dismantling/taking down carefully aluminium/ copper point wiring (light, fan, socket or power) complete, including fixtures and fittings such as switches, ceiling roses, pendants, regulators , sockets, light fittings etc., removing materials to stores for keeping in safe custody for taking credit and making good the disturbed surfaces of wall, floors, ceiling etc to match with the existing surfaces with matching OBD/White wash/Distemper complete all as specified and as directed.
Material and labour for concealed point wiring using approved colour coding as per IS, with multi stranded copper conductor 1.5 sqmm (Nominal area), single core, FRLSH (FIRE Retardant Low Smoke and low Halogen), PVC insulated and unsheathed stranded cable drawn through and including non metallic, heavy duty PVC concealed conduit not less than 25mm dia and its fittings including all tees, bell mouth pieces and fixing accessories such as couplers, saddlers, pipe hooks etc, PVC junction boxes ISI marked with GI flush boxes / sunken boxes made out of 1.2mm thick of any module from 2 to 18 module confirming to IS-5139(pt-I) of 1969 and IS:14772-2000 with earth dolly including modular cover plates with frame i.e. inner and outer plate extended upto 25 mm over sunken box for housing the modular switches, socket outlets, fan regulators etc with brass screws and brass washers and making good the disturbed surfaces as per existing for one light / fan / bell point contorlled by one switch including 1.5 sqmm single core PVC insulated and unsheathed FRLSH (FIRE Retardant Low Smoke and low Halogen) copper cable, 1100 volt grade with multi stranded copper conductor green colour as earth continuity conductor upto common earth and connecting to common earth dolly with suitable size of lugs for one light point/ fan point/bell point controlled by one switch complete all as specified and as directed. NOTES : - (i) The quoted rates shall be deemed to be inclusive for cutting chases by chase cutter in wall/pillars/columns etc. of any description for concealing the conduits to required depth & making good the disturbed surface in cement mortar 1:4 including finishing the surface to match with the existing surface. The portion of point wiring at ceiling shall be in surface conduit of suitable size fixed on ceiling surface with using necessary accessories/fittings. (ii) Point wiring & earth wire shall be connected to each & every flush/sunken box. (iii) All screws, fasteners, bolts, nuts & washer shall be cadmium plated & the cost of which is deemed to be included in the quoted unit rates.
Description all as per item No 122.00 above but for socket out let point 5 Amps on same board complete all as specified and directed.
Description all as per item No 122.00 above but for socket out let point 5 Amps on independent board complete all as specified and directed.
Description all as per item No 122.00 above but for one two way point controlled by two switch complete all as specified and directed.
Description all as per srl item No 122.00 here in before but point wiring for one socket out let 15&5 Amps (independent) controlled by one switch with using 2.5 Sq mm (nominal area) stranded copper conductor complete all as specified and directed.
Description all as per srl item No 122.00 here in before but point wiring for one plug & socket (independent) controlled by one MCB with using 4 Sq mm (nominal area) stranded copper conductor for Geyser/AC point complete all as specified and directed.
Supply and fixing of modular switches, one way, 6 amps one module, 230V, AC supply, ISI marked complete all as specified and directed.
Supply and fixing of modular switches, two way, 6 amps one module, 230V, AC supply, ISI marked complete all as specified and directed.
Supply and fixing of modular switches, one way, 15 Amps, one module, 230 volt , AC supply, ISI marked complete all as specified and directed.
Supply and fixing of modular socket outlet 6 amps, 2/3 pin combined 2 module, 230 volt, complete all as specified and directed.
Supply and fixing of modular socket outlet 6/15 amps, 2/3 pin, 2 module, complete all as specified and directed.
Supply and fixing of modular switches, bell push, 6 amps one module, 230V, 50 Hz supply, complete all as specified and directed.
Supply and fixing of fan regulator step type one module / 2 module, 120w 230 Volts, 50 Hz, AC complete all as specified and directed.
Supply and fixing of ceiling rose surface bakelite 65x50mm, 3 terminal complete all as specified and directed.
Supply and fixing of lamp holder, PVC/polycarbonate type with back plate suitable for batten fittings,complete all as specified.
Supply and fixing of door bell electric ,ding dong /musical type, single phase 230 volts, ISI marked complete all as specified.
Supply and fixing of ceiling fans, AC, single phase, 230V, 50Hzs, copper wounded of 1200mm sweep with BLDC technology, maximum power input upto 35W service value not less than 6.0, copper wire insuction motor with 5 star BEE rating complete alongwith blades, electronic regulator, canopy cover, down rods 'U' clamp, 3 core PVC flexible cable 1 sqmm for making connection of fan and hanging the fan in clamp, connecting with ceiling rose to fan complete all as specified and as directed.
Supply and fixing of heavy duty exhaust fan metallic body 300 mm sweep with and including louvers, electric, single phase 1400RPM, 240 volt 50 Hz complete and making suitable hole in existing cement concrete / brick walls built in cement mortar 1:4 and removing unserviceable/loose/broken debris upto 500m distance and making good the disturbed surfaces to match with the existing surface including plastering as required & finishes including grouting four Nos rag bolts, nuts & washers and connecting with 3 core copper flexible cable of size 23/0.0076 including testing & commissioning after installation at site complete all as specified and directed.
Supply, installation and testing of storage type heater (Geyser) of 25 litres capacity, vertical type to sustain high pressure upto 8 bars with fixing bolts / fastener, necessary PCC/cement work and making good the disturbed surfaces to match with existing surface giving electric and water connection and testing after installation to entire satisfaction of the Engineer-in-Charge complete with following specifications:- (a) 5 Star rated (Vertical type) Necessary BEE cerificate from OEM shall be produced by the contractor at the time of sample approval. (b) Metal Body (Shock proof and rust proof), (c) Glass line coated tank (Ferro-glass technology) / Polymer coated. (d) Incoloy glass coated heating element. (e) Adjustable thermostat. (f) Temperature indicator dial/digital type. (g) Multiple Heating Option. (h) Multiple Functional Safety Valve. (j) Thermal Cutout Capillary Type. NOTE : - Warranty certificate to be produced by the contractor from OEM for the following components before processing the bill. (a) For product - 02 Years (b) For metal tank 07 years.
Supply and fixing in repair of sheet metal enclosure SP with two pin and earth plug and socket with one single pole, MCB 20 Amps, 'B' curve, 240 volts complete all as specified and directed.
Supply and fixing of sheet metal enclosures vertical distribution board VTPN, (MCCB DB) 4 ways, double door, 415 volts with 200 amps rated bus bar IP 54 protection, with shrouded neutral bar and insulated bus bar and earth link, with and including MCCB 4 pole thermal release type, 125 Amps, 25 KA as incomer and MCBs as out going complete with making suitable size of MS cabinet 1.2 mm thick dully grouted on the wall (flush) with opening arrangement including making connections with suitable size of lugs and making good the disturbed surface matching with existing surface including taking down existing unserviciable MCCB/DBs including MCBs complete all as specified and directed..
Supply, installation, testing of SPN distibution board 8 way,double door , IP 43, as per IS 8623 including 100 Amps fully insulated copper bus bar, insulated neutral bar, earth bar, door earthing, reversible doors, PAN assembly for easy installation and also incoming and outgoing connections with suitable size of lugs/thimbles/glands including taking down existing unserviciable MCB/DBs including MCBs complete all as specified and directed.
Supply and fixing of MCB single pole, 240 volts, 50Hz , breaking capacity 10KA, 'B' curve 6 to 32 Amps, including connection with suitable size copper lugs complete all as specified and directed.
Supply and fixing of MCB single pole, 240 volts, 50Hz , breaking capacity 10KA, 'B' curve 40 to 63 Amps, including connection with suitable size copper lugs complete all as specified and directed.
Supply and fixing of MCB single pole and neutral, 240 volts, 50Hz , breaking capacity 10KA, 'B' curve 40 to 63 Amps, including connection with suitable size copper lugs complete all as specified and directed.
Material and labour for concealed sub main wiring with two single core FRLSH PVC insulated unsheathed copper conductor cable 4.0 sqmm drawn in and including rigid non metallic PVC medium grade 25 mm dia concealed conduit with accessories on wall or ceiling with one additional PVC insulated , stranded copper conductor FRLSH of 4.0 sqmm, green colour for earth continuity conductor including taking down old unserviceable sub main wiring and making good the disturbed surface complete all as specified and directed. NOTE : - 3 run of cable and 1 run of conduit shall be measured as 1 unit. (ii) The quoted rates shall be deemed to be inclusive for cutting chases in wall/pillars/columns etc. of any description for concealing the conduits to required depth & making good the disturbed surface in cement mortar 1:4 including finishing the surface to match with the existing surface. The portion of sub main wiring at ceiling shall be in surface conduit of suitable size fixed on ceiling surface with using necessary aceessories/fittings.
Material and labour for concealed sub main wiring with two single core FRLSH PVC insulated unsheathed copper conductor cable 6.0 sqmm drawn in and including rigid non metallic PVC medium grade 25 mm dia concealed conduit with accessories on wall or ceiling with one additional PVC insulated , stranded copper conductor FRLSH of 6.0 sqmm, green colour for earth continuity conductor including taking down old unserviceable sub main wiring and making good the disturbed surface complete all as specified and directed. NOTE : - 3 run of cable and 1 run of conduit shall be measured as 1 unit. (ii) The quoted rates shall be deemed to be inclusive for cutting chases in wall/pillars/columns etc. of any description for concealing the conduits to required depth & making good the disturbed surface in cement mortar 1:4 including finishing the surface to match with the existing surface. The portion of sub main wiring at ceiling shall be in surface conduit of suitable size fixed on ceiling surface with using necessary aceessories/fittings.
Supply and fixing of indoor decorative LED tube light fitting 1x 20W, 220V, AC decorative box type with opal diffuser, including 20 watt LED tube, T8 with aluminium extrusion heat sink and connecting up with two core 1.5 sq mm copper conductor cable from connector to ceiling rose to connection of light including disconnecting and taking down old unserviceable light fitting of any description and in any position complete all as specified and directed.
Supply and fixing aesthetically designed STYLO wall light bowl type and B22 holder and B22 holder with 9 watt LED Lamp warm white & clear diffuser including connecting up with three core 1.5 sqmm flexible copper conductor cable including disconnecting and taking down old existing light fitting/new provision as required at site of any description and in any position complete all as specified and directed.
Supply and fixing of surface mounted LED tube light fitting with high efficient diffuser mirror light, aluminium housing in CRCA body suitable and including 10 watt LED tube rod high efficient, AC 220-240 volts, 50 Hz and connecting with two core 1.5 Sqmm copper conductor cable from ceiling rose to connector of the light including disconnecting and taking down old existing light fitting of any description and in any position complete all as specified and directed.
Supply and fixing of LED bulk head light fitting, 10 watt with min 800 lumen, industrial model IP 65, energy efficient with lamp 10 watt with provision of 2/3 core PVC copper conductor cable 0.5 Sqmm size from ceiling rose to light fitting complete including disconnecting and taking down old existing light fitting of any description complete all as specified and directed.
Supply and fixing of LED security light luminaire 45 watt, pressure die cast aluminum housing, toughened heat resistant glass, IP65 protection, better optics for uniform distribution with multiplte LEDs not less than 2 W each and having optical grade polycarbonate lens with all accessories internally pre wired and bracket made up of GI pipe, light grade, 25mm dia, 0.9 metre long, bent to required length, fixed to wall with two clamps made of 20 x 3 mm mild steel flat minimum 15cm long, 4 nos 8mm dia bolts with nuts including connecting up with two core 1.5 sq mm copper conductor cable from connector to ceiling rose to connection of light complete all as specified and directed.
Material and labour for taking down electric meter single phase any capacity alongwith its connection and keeping in safe custody and refix the same after competion of work incl necessary wiring work from meter to main DB all as specified and as directed.
Material and labour for taking down water heater (Geyser) any type/size/capacity with all accessories after removing all incoming/outgoing pipe line connection deposited to AGE E/M (South) store yard complete all as specified and directed.
Taking down old exhaust fan any sweep or any type and deposited to AGE E/M (South) store yard complete all as specified and directed.
Taking down old ceiling fan any sweep or any type and deposited to AGE E/M (South) store yard complete all as specified and directed.
Taking out old unserviceable earthing and Material and labour for earthing and material & labour for earthing with galvanised steel earth plate electrode 60cm x 60cm x 6.0 mm thick buried directly in ground vertically at a depth not less than 2.25metre below normal ground level with top edge of earth plate at a depth not less than 1.5 metre below normal ground level, earth plate surrounded from all sides by 15cm thick packed layer of charcoal dust and common salt filling in alternate layers and electrode connections by using galvanised iron wire 4 mm as earthing lead (upto terminal point) by means of bolts, nuts, check nuts and washers made of galvanised iron and thimbles and protected by light grade 15 mm dia GI pipe connected to main switch board or main control board and GI pipe medium grade 20mm bore for watering and including funnel , wire mesh, 50 mm thick precast RCC 1:2:4 type B1using 20 mm graded stone aggregate , reinforced with 8 mm dia dedormed /TMT bars 3 nos both way 12 mm dia round bar handle and PCC chamber pit with PCC (1:3:6) type C-2 using 40mm graded stone aggregate, including excavation and earth work in any type of soil , returning , filling in approved soil and disposal of surplus soil to a distance not exceeding 50m all as specified and shown in electrical plate No 3 of SSR 2009 (Part-I) complete all as specified and as directed. Note :- (i) Earth lead wire and its protection pipe upto and including 7.50 mtr only from top of earth electrode are included under this item. (ii) On testing if the earth resistance is not obtained within permissible limit, earthing will be re-done at NO extra cost ,till the desired earth resistance is obtained. (iii) Any joint in earth lead from earth electrode to test point shall not be allowed/permitted.
NOTE:- Amount of credit of Rs. 65,411.50 for retrieved materials is mentioned in Schedule of Credit Page No 21(R) & 22(R) of tender documents in pdf form which will be deducted offline while acceptance of tender.
power house batteries
dhingra builders
Parveen Kumar
V K Constructive Builders
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .