Providing wall paneling, false ceiling along with other allied works to meeting hall in circle office building at Raichur.

Providing wall paneling, false ceiling along with other allied works to meeting hall in circle office building at Raichur.

19.7.1 Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material to the appropriate disposal area as per direction of Engin...

7.28 Providing & fixing 10 mm thick plaster of Paris (gypsum anhydrous) ceiling up to a height of 5 m above floor level, over first class kail wood strips 25x6 mm with 10 mm gap in between and reinfor...

15.106 Providing applying two coats of wall putty to inside plastered wall and ceiling using putty. Scapping and levelling the surface using steel blade and preparing the surface even and smooth by us...

8.33.1 Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications: Two coats applied on walls @ 1.25 L/10 m² over & including one co...

10.10 Providing and fixing in wall lining flat pressed three layer (medium density)particle board or graded wood Pre-laminated one side decorative lamination and other side balancing lamination Grade ...

Providing and fixing decorative laminate sheet of approved shade and design made out of 1mm thick to be fixed over 12mm ply complete including cost and conveyance of all materials, labour for all it...

Providing and fixing Single shutter glass door of 12mm thick plain toughened glass (Saint Gobain, Modi float). The door is fixed by using any approved make hardware fitting like patch fitting, pivot, ...

22.22 Providing & fixing Roller Blinds of reputed make 38mm round Aluminium channel with blackout fabric, telting with chain (Ball) system with all necessary fittings and fixtures as per direction of ...

9.33 Providing and laying linoleum plain flooring or coloured 3.2mm thick sheet / tiles laid with an approved adhesive on sub floor stretching, cutting and fixing complete , including cost of material...

Electrification:Supplying of…TR split Air conditioners suitable for operation on A/C supply single phase 50 Hz 230 Volts with hermetically sealed compressor with air cooled condenser, motor capacito...

Installation charges for split type air conditioner with allied works for one indoor and one outdoor unit is to be mounted on suitable Angle Iron support up to 3.0 ton split/cassette type A/C.

Supplying and installation of insulated refrigerant copper tubing of 5/8 and 3/8 with polythene foam insulation 3 core 80 stand copper wiring between indoor and outdoor unit. Leak testing oil and gas ...

9.1 Supplying, erecting,testing and commissioning of voltage stabilizer suitable for 170 to 270v input and load variation from no load to full load,with overload protection,spike suppression,operating...

Point wiring using Copper wire without switch. Supplying and wiring adopting loop system in existing PVC Conduit / casing capping using 1100V grade, COPPER conductor flexible multistrand FRLS PVC insu...

b) Medium Points Above 3mts Upto 6mm thicks, from tappring point to out let via switch

c) long Points Above 6m and Upto 10m,from tappring point to out let via switch

Wiring forlighting for power circuit using one of FRLS PVC insulated 1100V garde mullti strand copper with low conductor resistance cable single core wire in open or concealed system of wiring with s...

11.5 Supply of round/square recess/surface mounted rolling type LED Down light with W GU 10 LED Lamp Rib Fabricated from Die cast alluminium with white powder coated prewired to mains connector & ha...

Supply of round/square recess/surface mounted rolling type LED Down light with W GU 10 LED Lamp Rib Fabricated from Die cast aluminium with white powder coated prewired to mains connector & has swivel...

11.5.3 Supply of round/square recess/surface mounted rolling type LED Down light with W GU 10 LED Lamp Rib Fabricated from Die cast aluminium with white powder coated prewired to mains connector and ...

3.4 Supplying and flush mounting powder coated/galvanized metal box suitable for mounting modular switch plates.The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall ...

Supplying and fixing superior quality of modular switch mounting polycorbonate plate with necessary supporting back plate with required nos of machine screws , bolts , nuts etc., complete on existing ...

3.5.5 8 Module

3.5.8 18 Module

6.5 Supplying wall mounting fan suitable to operate at singlephase 230v A.C. supply.(6.5.2) 400mm Sweep

Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. Stepped Fan Regulator.(i.3.6.4 p10 R-290)

6/16Amps universal socket( item 3.6.11 P10 Rate 162)

16Amps one way switch (3.6.8 P10 R-115))

32Amps DP switchI 3.6.10 p10 R 182)

9.3 Supplying,erecting,testing& commissioningof ON-LINE UPS system suitable for operation on 230V,50Hz,A/C supply,with isolation transformer all accessories complete and Excluding batteries and wiring...

9.5 Supplying,installation,testing & commissioning of 12V DC,AH batteries in poly propylene container for U.P.S.Sealed maintenance free batteries 9.5.9 150 AH capacity

FURNITURES:Supplying and placing in position conference Sharing table of the following specifications of Make GODREJ/FEATHERLITE/EQUIVALENT.2700 x 600 x 750 Table consisting 25mm thick water proof H...

Providing, supplying and placing of High Back Chair of Make GODREJ/FEATHERLITE/ EQUIVALENT.

a) SEAT ASSEMBLY: The seat is made up of 1.5 plus or minus 0.1 cm thick hot pressed plywood upholstered with...

Providing, supplying and placing of High Back Chair of Make GODREJ/FEATHERLITE/ EQUIVALENT.

a) SEAT ASSEMBLY: The seat is made up of 1.5 plus or minus 0.1 cm thick hot pressed plywood upholstered with...