Loading…
Loading…
| # | Company | Status |
|---|---|---|
| 1 | Accepted-Technical | Accepted-Technical Accepted |
| 2 | Accepted-Technical VILLAGE PO BASSA WAXIRAN TEHSIL NURPUR DISTT KANGRA HP | MANDI | HIMACHAL PRADESH | 175013 | Accepted-Technical Accepted |
| 3 | Accepted-Technical ANDHRA POWER HOUSE DIVISION HPSEBL CHIRGAON 171208 | SHIMLA | HIMACHAL PRADESH | 171208 | Accepted-Technical Accepted |
Tender Value
₹8.2 L
EMD Value
₹16,500
Closing Date
12 Jan 2026, 10:30 amClosed
Executive Engineer
HP City Transport and Bus Stand Management And Development Authority Tutikandi Shimla -4
SH Painting Distempering , drain in back side of New Bus Stand and CGI Sheet roofing in Old Bus Stand
2025_BSMDA_124584_5
No.HPBSMDA/EE/(2)2025-2026 Tender Vol-V
Open Tender
Civil Works
90 days
Nagrota Bagwan
Please refer tender document
9 documents required · 9 mandatory
₹415
HPBSMDA
₹16,500
30 Jan 2026
29 Dec 2025
12 Jan 2026
30 Dec 2025
12 Jan 2026
30 Dec 2025
Providing and fixing double scaffolding system (cup lock type) on the exterior side, up to seven story height made with 40 mm dia M.S. tube 1.5 m centre to centre, horizontal & vertical tubes joining with cup & lock system with M.S. tubes, M.S. tube challies, M.S. clamps and M.S. staircase system in the scaffolding for working platform etc. and maintaining it in a serviceable condition for the required duration as approved and removing it there after .The scaffolding system shall be stiffened with bracings, runners, connection with the building etc wherever required for inspection of work at required locations with essential safety features for the workmen etc. complete as per directions and approval of Engineer-in-charge .The elevational area of the scaffolding shall be measured for payment purpose .The payment will be made once irrespective of duration of scaffolding., including all leads, lifts and carriage of materials, complete in all respect of as per entire satisfaction of the Engineer in charge.
Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq. meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, all complete:-With cement mortar 1:4 (1 cement : 4 fine sand) including all leads, lifts and carriage of materials, complete in all respect of as per entire satisfaction of the Engineer in charge
Providing and applying white cement based putty of average thickness 1 mm , of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.including all leads, lifts and carriage of materials, complete in all respect of as per entire satisfaction of the Engineer in charge
Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade:- One or more coats on old work, including all leads, lifts and carriage of materials, complete in all respect of as per entire satisfaction of the Engineer in charge
Distempering with 1st quality acrylic washable distemper (ready made) of approved manufacturer and of required shade and colour complete. as per manufacturer's specification :- One or more coats on old work including all leads, lifts and carriage of materials, completein all respect of as per entire satisfaction of the Engineer in charge
Finishing walls with water proofing cement paint of required shade :-Old work (one or more coats applied @ 2.20 kg/10 sqm) over priming coat of primer applied @ 0.80 litrs/10 sqm complete including cost of Priming coat, ncluding all leads, lifts and carriage of materials, completein all respect of as per entire satisfaction of the Engineer in charge
Painting on G.S. sheet with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : Old work (one or more coats) including cost of Priming coat, including all leads, lifts and carriage of materials, completein all respect of as per entire satisfaction of the Engineer in charge
Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion Single socketed pipes :- 110mm diameter including all leads, lifts and carriage of materials, completein all respect of as per entire satisfaction of the Engineer in charge
Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion:-Bend 87.5(Degree) 110 mm including all leads, lifts and carriage of materials, completein all respect of as per entire satisfaction of the Engineer in charge
Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion:- Shoe (Plan) 110mm including all leads, lifts and carriage of materials, completein all respect of as per entire satisfaction of the Engineer in charge
Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised PVC rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with M.S. screws of required length, including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete:- 110mm including all leads, lifts and carriage of materials, completein all respect of as per entire satisfaction of the Engineer in charge
Providing and fixing in position collapsible steel shutters with vertical channels 20x10x2 mm and braced with flat iron diagonals 20x5 mm size, with top and bottom rail of T-iron 40x40x6 mm, with 40 mm dia steel pulleys, complete with bolts, nuts, locking arrangement, stoppers, handles, including applying a priming coat of approved steel primer.including all leads, lifts and carriage of materials, completein all respect of as per entire satisfaction of the Engineer in charge
Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved complete, all respect of as per entire satisfaction of the Engineer in charge
Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan),including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within all lead ncluding all lifts involved complete, all respect of as per entire satisfaction of the Engineer in charge
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:4:8 (1 Cement : 4 coarse sand) : 8 graded stone aggregate 40 mm nominal size) including all leads, lifts and carriage of materials, complete in all respect of as per entire satisfaction of the Engineer in charge
Centering and shuttering including strutting, propping etc. and removal of form work for :Retaining walls, return walls, walls (any thickness) including attached pilasters, buttresses, plinth and string courses fillets, kerbs and steps etc. including all leads, lifts and carriage of materials, complete in all respect of as per entire satisfaction of the Engineer in charge
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:2:4 (1 cement : 2 coarse sand) : 4 graded stone aggregate 20 mm nominal size)including all leads, lifts and carriage of materials, complete in all respect of as per entire satisfaction of the Engineer in charge
Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) over 75mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation, levelling & dressing & finishing the top smooth) including all leads, lifts and carriage of materials, complete in all respect of as per entire satisfaction of the Engineer in charge
Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within all lead , lifts and carriage of materials, complete in all respect of as per entire satisfaction of the Engineer in charge
Dismantling roofing including ridges, hips, valleys and gutters etc., and stacking the material all lead , lifts and carriage of materials, complete in all respect of as per entire satisfaction of the Engineer in charge:- G.S. sheet.
15 mm cement plaster on the rough side of single or half brick wall of mix :1:4 (1 cement: 4 fine sand) in all height, lead , lifts and carriage of materials, complete in all respect of as per entire satisfaction of the Engineer in charge
Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. in all height, lead , lifts and carriage of materials, complete in all respect of as per entire satisfaction of the Engineer in charge
Providing corrugated G.S. sheet roofing including vertical / curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (up to any pitch in horizontal/ vertical or curved surfaces), excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required:-0.63 mm thick with zinc coating not less than 275 gm/ m² in all height, lead , lifts and carriage of materials, complete in all respect of as per entire satisfaction of the Engineer in charge
Providing corrugated G.S. sheet roofing including vertical / curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (up to any pitch in horizontal/ vertical or curved surfaces), excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required:-0.63 mm thick with zinc coating not less than 275 gm/ m² in all height, lead , lifts and carriage of materials, complete in all respect of as per entire satisfaction of the Engineer in charge (Labour Rate only)
Providing and fixing 15 cm wide, 45 cm overall semi-circular plain G.S. sheet gutter with iron brackets 40x3mm size, bolts, nuts and washers etc., including making necessary connections with rain water pipes complete. 0.63 mm thick with zinc coating not less than 275 gm/m² in all height, lead , lifts and carriage of materials, complete in all respect of as per entire satisfaction of the Engineer in charge
Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion.Bend 87.5°:-110 mm bend in all height, lead , lifts and carriage of materials, complete in all respect of as per entire satisfaction of the Engineer in charge
Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised PVC rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with M.S. screws of required length, including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete:-110 mm, in all height, lead , lifts and carriage of materials, complete in all respect of as per entire satisfaction of the Engineer in charge
Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes:-110 mm diameter in all height, lead , lifts and carriage of materials, complete in all respect of as per entire satisfaction of the Engineer in charge
Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion:-Shoe (Plain) 110mm in all height, lead , lifts and carriage of materials, complete in all respect of as per entire satisfaction of the Engineer in charge
Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised PVC rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with M.S. screws of required length, including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete:-110mm in all height, lead , lifts and carriage of materials, complete in all respect of as per entire satisfaction of the Engineer in charge
Finishing walls with water proofing cement paint of required shade :Old work (one or more coats applied @ 2.20 kg/10 sqm) over priming coat of primer applied @ 0.80 litrs/10 sqm complete including cost of Priming coat
Please Enable Macros to View BoQ information
tech_bid_open.pdf
tech_eval.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 1.14 MB
SBD.pdf
Tender Documents • 10.50 MB
BOQ_183151.xls
BOQ • 0.26 MB
Download all tender documents and submit your bid