Kerala

To Be Opened

Works

Miscellaneous Works

GENERAL-THANNEERMUKKOM SWB-46 Ft Radial Lock gate shutter fixing by fabrication and installation of embedded parts with SS anchoring rod and other associated works. -General Mechanical Work

Irrigation Department

Thanneermukkom Bund | Alappuzha, Kerala

Amount: ₹70.7 LCloses: 27 May 202619 May 2026Closed

Timeline

Published12 May 2026
Closed27 May 202619 May 2026
Bid Opening29 May 202621 May 2026

Corrigenda

Corrigendum

1 updatesLatest on 20 May 2026Submission Ends:19 May 202627 May 2026

Date changes

Download Ends19 May 202627 May 2026Clarification Ends19 May 202627 May 2026Submission Ends19 May 202627 May 2026Bid Opening21 May 202629 May 2026

Tender Value

₹70.7 L

EMD Value

₹50,000

Closing Date

27 May 2026, 4:00 pmClosed

Tender Inviting Organisation

Name

EXECUTIVE ENGINEER

Address

Mechanical Division, Irrigation Dept, 2nd floor, Mini Civil Station, Thathampally.P.O, Alappuzha-688013

Work Description

GENERAL-THANNEERMUKKOM SWB-46 Ft Radial Lock gate shutter fixing by fabrication and installation of embedded parts with SS anchoring rod and other associated works. -General Mechanical Work

Tender Information

Tender ID

2026_Irrig_850121_1

Reference Number

IRR/MH/TR/6908/2022_16_8_7/RC 1/4

Tender Type

Open Tender

Product Category

Miscellaneous Works

Form of Contract

Item Rate

Period of Work

365 days

Location

Thanneermukkom Bund

Source Website

Subscribe to view

Eligibility / Pre-Qualification

Please refer Tender documents.

Documents Required

8 documents required · 8 mandatory

Fee/PreQual/Technical/Finance

RequiredCopy of Regn Certificate attested by Gazetted Officer with validity and class of registration (.pdf)

RequiredBid Submission Letter as per Item No.1Part6 (.pdf)

RequiredPreliminary agreement in Stamp paper worth Rs.200 duly filled and signed by bidder (.pdf)

RequiredIntegrity Pact Certificate as per Item No.3 Part6 (.pdf)

RequiredAffidavit as per Item No.4 as per Part 6 (.pdf)

RequiredBID Documents with NIT (.pdf)

RequiredRequistion for e payment as per item no 6 part 6 (.pdf)

RequiredBOQ (.xls)

Fee & Financial Details

Tender Fee Amount

₹2,760

Tender Fee Exemption Allowed

Yes

EMD Fee Amount

₹50,000

Important Dates

Last Activity

12 May 2026

Published

12 May 2026

Bid Opening

29 May 2026

Download Starts

12 May 2026

Download Ends

27 May 2026

Submission Starts

12 May 2026

Clarification Period

12 May 2026 - 27 May 2026

Bill of Quantities

Item RateBoQ_Ver3.0INR

BoQ1 (31 items)

Sl No	Description	Qty	Unit	Est. Rate	Est. Amount
1Formation of Sand Bund on Both Side of 46’ Lock Chamber, Bailing Out of Water
1.001	OD22862/2025-2026:Providing Sand Bund on Both Side of 46’ Lock Chamber with needle shutter support of ISMB 300 x 140, ISMC 200 x 75 and MS Flat 6 x 100 mm including 1/5 th cost of MS materials and conveying charges, Bund as per approved shape 10m bottom width, 5m top width using empty gunny/polythene bag filled with earth placed in two rows 1.0m apart and filled in between with puddle clay to form bund for an average height of 5.5m including labour dismantling the bund after completion of work as the direction from the departmental officers at site.	-	metre	-	-
1.002	OD22860/2025-2026:BAILING OUT WATER USING PUMP ABOVE 30HP AND UP TO 40HP - Bailing out water with engine and pump set above 30HP and up to 40HP, including conveyance to site and erection, cost of fuel, lubrication oil and other stores, pay of staff etc complete	-	hour	-	-
1.003	OD22861/2025-2026:Bailing out water using pump above 5 HP and Up to 10 HP-Bailing out water with engine and pump set above 5HP and up to 10HP, including conveyance to site and erection, cost of fuel, lubrication oil and other stores, pay of staff etc complete	-	hour	-	-
2Removal of Slit/Mud From Lock Chamber, Dismantling of Radial Gates, Demolishing the Existing Civil Structure for Anchoring Trunnion Bracket and Concreting etc.
2.001	2.6.1:Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in-charge.All kinds of soil	-	cum	-	-
2.002	OD22851/2025-2026:Dismantling/Assembling of the existing lock gate and associated its operating piston, cylinder, hydraulic oil hose etc. taking out from the lock chamber and conveying to safe place up to 100 Mtr etc complete	-	set	-	-
2.003	15.3:Demolishing R.C.C. work manually / by mechanical means including stacking of steel bars and disposal of unserviceable material with in 50 metres lead as per direction of Engineer -in-Charge.	-	cum	-	-
2.004	26.31.2:Providing, mixing and applying bonding coat of approved adhesive on chipped portion of RCC as per specifications and direction of Engineer-In-charge complete in all respect.Epoxy bonding adhesive having coverage 2.20 sqm/kg of approved make	-	sqm	-	-
2.005	26.29.2:Cleaning of reinforcement from rust from the reinforcing bars to give it a total rust free steel surface by using alkaline chemical rust remover of approved make with paint brush and removing loose particles after 24 hours of its application with wire brush and thoroughly washing with water and allowing it to dry, all complete as per direction of Engineer-In-Charge.Bars above 12 mm diameter	-	metre	-	-

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

Tender Page Snapshot

details.html

html • 0.03 MB

NIT Documents

Tendernotice_1.pdf

PDF • 0.05 MB

Work Item Documents

BOQ_1436534.xls

BOQ • 0.33 MB

sbd1.pdf

Tender Documents • 1.65 MB

Corrigendum Documents

Corrigendum.pdf

PDF • 0.31 MB

Ready to Participate?

Download all tender documents and submit your bid

Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .

Loading…

Sl No	Description	Qty	Unit	Est. Rate	Est. Amount
1Formation of Sand Bund on Both Side of 46’ Lock Chamber, Bailing Out of Water
1.001	OD22862/2025-2026:Providing Sand Bund on Both Side of 46’ Lock Chamber with needle shutter support of ISMB 300 x 140, ISMC 200 x 75 and MS Flat 6 x 100 mm including 1/5 th cost of MS materials and conveying charges, Bund as per approved shape 10m bottom width, 5m top width using empty gunny/polythene bag filled with earth placed in two rows 1.0m apart and filled in between with puddle clay to form bund for an average height of 5.5m including labour dismantling the bund after completion of work as the direction from the departmental officers at site.	-	metre	-	-
1.002	OD22860/2025-2026:BAILING OUT WATER USING PUMP ABOVE 30HP AND UP TO 40HP - Bailing out water with engine and pump set above 30HP and up to 40HP, including conveyance to site and erection, cost of fuel, lubrication oil and other stores, pay of staff etc complete	-	hour	-	-
1.003	OD22861/2025-2026:Bailing out water using pump above 5 HP and Up to 10 HP-Bailing out water with engine and pump set above 5HP and up to 10HP, including conveyance to site and erection, cost of fuel, lubrication oil and other stores, pay of staff etc complete	-	hour	-	-
2Removal of Slit/Mud From Lock Chamber, Dismantling of Radial Gates, Demolishing the Existing Civil Structure for Anchoring Trunnion Bracket and Concreting etc.
2.001	2.6.1:Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in-charge.All kinds of soil	-	cum	-	-
2.002	OD22851/2025-2026:Dismantling/Assembling of the existing lock gate and associated its operating piston, cylinder, hydraulic oil hose etc. taking out from the lock chamber and conveying to safe place up to 100 Mtr etc complete	-	set	-	-
2.003	15.3:Demolishing R.C.C. work manually / by mechanical means including stacking of steel bars and disposal of unserviceable material with in 50 metres lead as per direction of Engineer -in-Charge.	-	cum	-	-
2.004	26.31.2:Providing, mixing and applying bonding coat of approved adhesive on chipped portion of RCC as per specifications and direction of Engineer-In-charge complete in all respect.Epoxy bonding adhesive having coverage 2.20 sqm/kg of approved make	-	sqm	-	-
2.005	26.29.2:Cleaning of reinforcement from rust from the reinforcing bars to give it a total rust free steel surface by using alkaline chemical rust remover of approved make with paint brush and removing loose particles after 24 hours of its application with wire brush and thoroughly washing with water and allowing it to dry, all complete as per direction of Engineer-In-Charge.Bars above 12 mm diameter	-	metre	-	-

Sl No

Description

Qty

Unit

Est. Rate

Est. Amount

1Formation of Sand Bund on Both Side of 46’ Lock Chamber, Bailing Out of Water

1.001

OD22862/2025-2026:Providing Sand Bund on Both Side of 46’ Lock Chamber with needle shutter support of ISMB 300 x 140, ISMC 200 x 75 and MS Flat 6 x 100 mm including 1/5 th cost of MS materials and conveying charges, Bund as per approved shape 10m bottom width, 5m top width using empty gunny/polythene bag filled with earth placed in two rows 1.0m apart and filled in between with puddle clay to form bund for an average height of 5.5m including labour dismantling the bund after completion of work as the direction from the departmental officers at site.

metre

1.002

OD22860/2025-2026:BAILING OUT WATER USING PUMP ABOVE 30HP AND UP TO 40HP - Bailing out water with engine and pump set above 30HP and up to 40HP, including conveyance to site and erection, cost of fuel, lubrication oil and other stores, pay of staff etc complete

hour

1.003

OD22861/2025-2026:Bailing out water using pump above 5 HP and Up to 10 HP-Bailing out water with engine and pump set above 5HP and up to 10HP, including conveyance to site and erection, cost of fuel, lubrication oil and other stores, pay of staff etc complete

hour

2Removal of Slit/Mud From Lock Chamber, Dismantling of Radial Gates, Demolishing the Existing Civil Structure for Anchoring Trunnion Bracket and Concreting etc.

2.001

2.6.1:Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in-charge.All kinds of soil

cum

2.002

OD22851/2025-2026:Dismantling/Assembling of the existing lock gate and associated its operating piston, cylinder, hydraulic oil hose etc. taking out from the lock chamber and conveying to safe place up to 100 Mtr etc complete

set

2.003

15.3:Demolishing R.C.C. work manually / by mechanical means including stacking of steel bars and disposal of unserviceable material with in 50 metres lead as per direction of Engineer -in-Charge.

cum

2.004

26.31.2:Providing, mixing and applying bonding coat of approved adhesive on chipped portion of RCC as per specifications and direction of Engineer-In-charge complete in all respect.Epoxy bonding adhesive having coverage 2.20 sqm/kg of approved make

sqm

2.005

26.29.2:Cleaning of reinforcement from rust from the reinforcing bars to give it a total rust free steel surface by using alkaline chemical rust remover of approved make with paint brush and removing loose particles after 24 hours of its application with wire brush and thoroughly washing with water and allowing it to dry, all complete as per direction of Engineer-In-Charge.Bars above 12 mm diameter

metre