Tracing Dismantling and Storage of Power Control and telephone cables in FACT Petrochemical Plants

Tracing, Dismantling and Storage of Power,Control and telephone cables in FACT Petrochemical Plants

Tracing of different types of armoured power cables upto & below 3.5 x 150 sq.mm , armoured telephone cables and control cables of different sizes as directed by area Engineer. Scope of work includes detailed site inspection to identify the cables to be traced, physically tracing each cable along the cable tray route from its origin to termination point, labeling/ marking cables with SS tags for easy identification, carefully disconnect end terminations to avoid damage to active in the cable trays(If required), if required remove and collect associated cable ties, clamps and fasteners. The work shall be done in a neat and aesthetic manner as directed by the Engineer in-charge. All materials required for the work will be in the scope of Vendor.

Tracing of different types of cable such as HT and LT armoured power cables above 3.5 x 150 sq.mm up to and including 3.5 x 300 sq.mm as directed by area Engineer. Scope of work includes detailed site inspection to identify the cables to be traced, physically tracing each cable along the cable tray route from its origin to termination point, labeling/ marking cables for easy identification, carefully cut and remove end terminations to avoid damage to active cables in the cable trays(If required), if required remove and collect associated cable ties, clamps and fasteners. The work shall be done in a neat and aesthetic manner as directed by the Engineer in-charge. All materials required for the work will be in the scope of Vendor.

Cutting,Dismantling and storing of power cables up to and including 4 x 25 sq.mm, control cables up to and including 19 x 2.5 sq.mm, Unarmoured earth conductors up to and including 120 sq.mm (Insulated/uninsulated) and armoured telephone cables up to 20 pair as directed by area Engineer. Scope of work includes detailed site inspection to identify the cables to be removed, physically tracing each cable along the cable tray route from its origin to termination point, labeling/ marking cables for easy identification, carefully cut and remove end terminations to avoid damage to active cables in the cable trays, remove and collect all cable ties, clamps and fasteners, coil and bundle the cables, transport cables to the designated storage area and arrange them systematically. The work shall be done in a neat and aesthetic manner as directed by the Engineer in-charge. All materials required for the work will be in the scope of Vendor.

Cutting,Dismantling and storing of different types of traced armoured power cables upto & below 3.5 x 150 sq.mm , armoured telephone cables and control cables of different sizes as directed by area Engineer. Scope of work includes final physical tracing of cable along the cable tray route between its cutting points. Labeling/ marking of cable which is to cut for easy identification. Carefully cut and remove end terminations to avoid any damage to active cables in the cable trays(if required), remove and collect all cable ties, clamps and fasteners, coil and bundle the dismentled cables, transport cables to the designated storage area and arrange them systematically. The work shall be done in a neat and aesthetic manner as directed by the Engineer in-charge. All materials required for the work will be in the scope of Vendor.

Identification, Cutting, Dismantling and storing of traced power cables above 3.5 x 150 sq.mm up to and including 3.5 x 300 sq.mm as directed by area Engineer. Scope of work includes final physical tracing of cable along the cable tray route between its cutting points. Labeling/ marking of cable which is to cut for easy identification. Carefully cut and remove end terminations to avoid any damage to active cables in the cable trays(if required), remove and collect all cable ties, clamps and fasteners, coil and bundle the dismentled cables, transport cables to the designated storage area and arrange them systematically. The work shall be done in a neat and aesthetic manner as directed by the Engineer in-charge. All materials required for the work will be in the scope of Vendor.

supply of experienced Craftsmen having qualification of ITI/ Diploma/ valid Wireman license in Electrical Engineering issued from Kerala State Electricity Licensing Board to support and supervise Electrical works mentioned below on 8-hour shift basis as directed by Engineer in charge. A)tracing of power/ control cables of size mentioned in above Sl. No 1 & 2 for detection of fault, armour damage and cable continuity. B)Power cable jointing. C)Proper fixing and setup, relocation of Cabel junction boxes/ telephone Junction boxes at height geater than 6 Mtrs.

Supply of high quality stainless steel cable tags with each tag shall have four holes for proper fixing. The size and thickness of the tags shall be as per latest industry standards. Stainless steel wire of 26 SWG shall be supplied along with tag for securing the tags and wire should be suitable for outdoor/industrial use. Each stamp shall have clear and permanent stamping as per details provided by the Engineer In-Charge. The font size and depth of stamping shall ensure durability and readability. All tags will be inspected for any defective or unclear stampings and defective tags will rejected or replaced.

PEEJESS ELECTRICALS (BID ID -3205741)