2075 VVIP / 2059

Name of work: Providing and Erecting Temporary EI and DG Set and Roshni Work for "Independence Day" (15th August) at Chaudhary High

School and Various Government building of Rajkot City-Rajkot ( From Dt.13/08/2026 to 15/08/2026)

Item Quantities estimated Item of work Tendered Rate Total amount

Item Quantities estimated Item of work Tendered Rate Total amount

No. but may be more or according to

In Figures In Word

Qty. Unit estiamted

Hire charges for440V A.C generating set following capacity

Rupees ThirtySix

with necessary fuel, mains, switchgears & accessories

Thousand Nine Hundred

1 1 Nos complete running on load / no load with acoustic sound proof 36978.12

SeventyEight Paise

enclosure etc as per requirement. With transportation charges

up to 30 kms.[F] 125 KVA

Hire charges for providing erecting and dismantling after use in

Rupees FourtyEight Paise

2 108 Nos good running condition with necessary interconnecting 48.48

FourtyEight Only

wire/cable on panel board.(A) D.P. Switch 16A/32A, 230V

Rupees Two Hundred

(Q) Distribution Boards 3 phase 440V 6A/32A

9 Nos 246.95 FourtySix Paise

NinetyFive Only

Rupees Two Hundred

9 Nos (F) BUSBAR (i) 63 Amp to 100 Amp. Above 1 Mtr. 233.31 ThirtyThree Paise

Rupees One Hundred

9 Nos (C ) T.P. Switch with neutral 63A/200A 440V 124.23 TwentyFour Paise

TwentyThree Only

Hire charges for providing, erecting with necessary connection

and dismantling after user of good running ELCBs/RCCBs

conforming to IS 12640 and having sensitivity of 30 ma and

Rupees Two Hundred

short circuit withstand capacity of 6 KA and Suitable for

3 9 Nos 293.91 NinetyThree Paise

operation on 3 Phase and neutral 415V having characteristic of

quick action & tripping with all advance feature & do not

incorporate any electronic component for following Max rating

(B) 63 Amps FP [Cat.II]

Higher charges for providing erecting and Removing after use Rupees Four Hundred

4 6 Nos of good running condition 300 mm/ 400 mm size low noise 443.90 FourtyThree Paise Ninety

oscillation type pedestal fan of good condition. Only

Hire charges for LED Flood Light Fittings with High Power

White LEDs wattage of 1 Watt and above assemble on single

MCPCB, efficiency more than 130 Im/w and corrosion free

high pressure die cast aluminium housing with smooth finish

powder coated and heat sink extruded aluminium with diffuser

and Polycarbonate optics/lenses with company mark/name

Rupees One Thousand

engraved or embossed 120 to 300 V, Power factor more than

5 50 Nos 1492.28 Four Hundred NinetyTwo

0.95, THD<10%, CCT 5000 K to 5700K, Uniformity ratio

Paise TwentyEight Only

>0.45, Luminaire efficiency > 85 Lumens/Watt, LED driver

efficiency >85%. CREE/OSRAM/PHILLIPS Lumileds

/NICHIA/SEOUL/BridgeLux(U.S.A) make LED used for

luminaire. (Each fitting required LM-79 & LM-80 Certificates)

(B) Flood Light (IP-65), Surge -4KV ( e ) Above 150 watts to

240 watts Cat-III

Hire charges for providing for temporary plug point with

Rupees ThirtyNine Paise

6 12 Nos 5/15Amp plug switch combined, erected in wooden board 39.39

ThirtyNine Only

Hire charges for providing, erecting & dismantling after use of

good running condition for PVC copper /Aluminium wire

7 1500 Rmt. 6.06 Rupees Six Paise Six Only

mains with suitable copper PVC 1.5 / 2.5 Sq.mm earth wire of

following size (A) 2 wire 1 /1.5 / 2.5 Sq.mm Copper

Rupees Seven Paise

1350 Rmt. (C) 2 wire 4 /6 Sq.mm Copper 7.58

FiftyEight Only

Hire charges for providing erecting as per direction of

Engineer in charge dismantling after use of good running

Rupees TwentyEight Paise

8 850 Rmt. condition for temporary power supply the XLPE insulated 28.79

SeventyNine Only

armoured cable Aluminium conductor of following size.(C)

Core 16 / 25 Sq.mm

Rupees FourtySix Paise

NinetySeven Only

Hire charges for providing & dismantling earth pit of

minimum bore dia.150mm size approved make Earthing

Electrode consisting Pipe-in-Pipe Technology as per IS 3043-

1987 made of corrosion free G.I.Pipes having Outer pipe dia

of 50mm having 80-200 Micron galvanizing, Inner pipe dia of

Rupees One Thousand

25 mm having 200-250 Micron galvanizing, connection

9 12 Nos 1155.95 One Hundred FiftyFive

terminal dia of 12mm with constant ohmic value surrounded by

Paise NinetyFive Only

highly conductive compound with high charge dissipation

suitable for following type of applications(a) For Electrical

Installation up to 440V in normal soil

Length of pipe - 1 Mtr

Back filling compound - 1 Nos Bag of 15 Kg.

Hire charges for providing erecting and dismantling after use of Rupees Three Thousand

10 2 Nos good running condition Industrial Air Cooler With Water 3466.32 Four Hundred SixtySix

filling erected as per instruction of engineer-in -charge Paise ThirtyTwo Only

Hire charges for Providing & erecting weather proof, dust &

vermin proof / floor mounted Front operated outdoor type

cubical Panel board having IP 64 protection made from

SWG thick CRC MS sheet for outer body and doors, 16 SWG

thick CRC MS Sheet for internal partition with neccessary

supporting angles, flats including cutting.bending , drilling,

welding revetting, with internal Partition and cable alley as per

requirement & instruction of Engineer in charge with

SUPPLY AND ERECTION OF of following type switchgears

/busbars with suitable size of inter connecting PVC copper

wire/ copper strips,rubber grommets,rib,earth bus and earth

bolt, foundation flange- bolts - base plates, sufficient Nos. of

Hinged doors, handles with locking arrangement &rubber

gasket complete .The panel shall be painted with epoxy powder

coating and have Cu. Busbar strips

. Each bus bar should insulated by color coded sleeve. WITH

PHASE INDICATING Lamps--- Digital Multi function meter -

Voltage, Amperes & Frequency only) with CTs coils) Each

panel will contain earth bus and earth bolts with danger notice Rupees Twelve Thousand

1 board. [C] Power Distribution Cubical Panel with main 12326.04 Three Hundred TwentySix

incomer 125A also with change over switch of 125A TPN Paise Four Only

MCCB - 1 Nos., 200 A Alum. Busbar, Outgoing 16A SP MCB

10 KA - 6 Nos, [Panel size 800mm H x 600 mm W x 350 mm

Hire charges for providing erecting temp LED light 10 mm

bulbs approved high glow with complete wiring with auto Rupees ThirtyFour Paise

changer reverse and after good use dismantling. (A) Strip FourtyFour Only

Light. (Minimum 38 Lamps / Mtr.)

Rupees Six Paise

6600 Rmt. (B) Series Light. (Minimum 5 Lamps / Mtr.) 6.26

Hire charges for providing & dismantling temp. three light Rupees Two Thousand

consisting Neon / LED Light with electronically controlled Three Hundred

effects(Par light) complete erected with necessary supports EightyEight Paise

with connection & necessary controller .(B) above 150 Watt NinetyFive Only

Hire charges for providing erecting and dismantling after use in

good running condition.

Rupees Four Hundred

Section pillar fabricated from 16 SWG thick M.S. Sheet with

14 9 Nos 463.59 SixtyThree Paise

40 x 40 x 6 mm thick angle iron legs with 12 mm thick bakelite

/ wooden sheet erected complete with following sizes

(b) Section pillar having size 75 x 60 x

Rupees Eight Lakh FourtyFive Thousand EightyFive Paise Eight Only

Note:- The Credit of dismentalled materials for Rs.00.00 shall be recovered from the First R.A. bill payable to the contrator and there after the

dismentalled materials shall be the property of the contractor.

I/We am/are willing to carry out the work at__________________% above/below (in figures)_____________________________________percent Above / below (in

words) the estimated rates mentioned above amount of my\our tender works out as under :-

Estimated amount put to Tender Rs. _________

Deduct________% below Rs. _________

Net Amount Rs. _________

Estimated amount put to Tender Rs. _________

Net Amount Rs. _________

A I/We hereby declare that I/we have visited the site and fully acquainted my self / our selves with the local situation regarding material,labour

and other factors pertaining to the work before submitting this tender.

B I/We hereby declare that I/we carefully studied the conditions of contract, detailed technical specifications and other tender documents of this

work and agree to execute the same accordingly.

C Any Excess in Tender Item/Extra Item if Needs to be Execute. Contractors has to carry out work on the instruction of Competant Authority on

Tender Submitted rate,No Excuse will be Accepted.Hence Contractor are Requested to quote the rate considering this condition.

D Contractor are requested to quote the Tender by considering that payment will be made after availibility of grant.Contractor has to start the

work immediately after issue of Work Order and as per instruction of Engineer-in-Charge irrespective of availibility of grant.

E "This estimate has been prepared on the new SOR wich is exclusive of GST hence GST additional will be paid to the agency as per existing

(Signature of the Contractor) Deputy Executive Engineer

Electrical R&B Sub Division

Executive Engineer

Electrical R&B Division

Note 1 Please strike out whichever is not applicable.

2 In the case of tendered amount being quoted incorrectly the quoted pered percentage Below/Above will be considered as final.