CERTAIN REAPIR OF CIVIL AND INTERNAL ELECTRICFICATION WORKS AT HOSPITALS UNDER GE NORTH BINNAGURI

Amount

SCHEDULE `A' ( CIVIL WORK) Disconnecting existing tanks, setting aside and refixing in position after roof repairing works, cleaning tank inside with bleaching powder and washing with clean water tank capacity exc. 500 litre and not exc. 1000 litre complete all as specified.

Demolition of existing roof treatment complete of any description and in taking down existing tarfelt including tiles, lime concrete and screed bed complete from roof surfaces including parapets and lowering and removing the same to a distance exc. 500 mtr and not exc. 1000 meter including roughening of old concrete surface of roof , cleaning the surface by wire brushing to remove all loose dust etc complete all as specified and directed.

Material and labour for 15 mm thick screed bed or bedding layers in cement mortar (1:4) mixed with water proofing compound @ 200 ml per bag (50 Kg) weight) of cement or as per manufacturers instruction in order to maintain proper slope over existing roof surfaces finished even and smooth without using extra cement for receiving treatment complete all as specified and directed.

Material and labour for water proofing treating to RCC roof with providing and applying single component acrylic polymer modified, fibre reinforced waterproof coating Roof Guard in 4 coats of application:- (a) apply primer coat with primer @ 0.3 Kg /sqm, (b) Over primer coat apply water proofing fibre reinforcement a length of appox 1 Mtrs @ 0.75 kg/Sqm on flat surface and ensure that there is no bubbles of creases, overlapping of the fibre is minimum of 50 mm and allow this coat dry for a period of 2-6 hours depending on atmospheric condition. (c) Apply second coat of water proofing coat @ 0.75 Kg/Sqm. (d) Apply final coat of primer @ 0.08 kg/Sqm after seconf coat dried properly. (Note : Water proofing treatment work shall be carried out by applicator of manufacturer only duly approved by GE in writiing.

Supply and fixed rotational moulded poly-ethylene multilayer water storage tanks ( cylinderical vertical with closed top ) 1000 litres capacity ,hoisted and fixed in position complete all as specified including dismantling PVC water tanks, including removing ball valve and removing unserviceable tank from work site complete all as specified

Supply and fixed rotational moulded poly-ethylene multilayer water storage tanks ( cylinderical vertical with closed top ) 500 litres capacity ,hoisted and fixed in position complete all as specified including dismantling PVC water tanks, including removing ball valve and removing unserviceable tank from work site complete all as specified

Supply and fixed ball valves, high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed (Minimum weight 210 gms complete , screwed for 20 mm bore dia. pipe or brass ferrule complete all as specified.

Supply and fixed in repairs ball valves, high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed (Minimum weight 210 gms complete , screwed for 20 mm bore dia. pipe or brass ferrule complete all as specified.

Dismantling floor, hearth or wall tiling including cement mortar bedding ( but not backing), in floors, aprons etc .laid dry or laid dry and pointed including removing of demolished material from work site at any distance outside MD land complete all as specified and directed.complete all as specified.

Material and labour for Non Skid ceramic coloured tiles (1st quality) 7 to 8mm thick ( square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screeding in CM 1:6 complete all as specified (Note : screed bed shall not be measured and paid separately).

Material and labour for glazed ceramic coloured / digital printed of size (300 x 450 mm x 7 mm thick ) as in vertical surfaces such as skirting/dado / riser to steps etc conforming to IS - 13712 grade IB-III set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over and including cement screed bed / backing layer of 10mm thick in cement mortar (1:4) complete all as specified and as directed. (Note : screed bed shall not be measured and paid separately).

Material and labour for 8 to 9 mm thick vitrified ceramic (square/rectangular) coloured polished tiles, (1st quality) area of each tiles not exc 0.36 sqm , as in floors etc. set and jointed in neat cement slurry and pointed in white cement and pigment to match laid over and including15 mm thick screeding in CM 1:6 complete all as specified (Note : screed bed shall not be measured and paid separately).

Material and labour for 8 to 9 mm thick vitrified ceramic (square/rectangular) coloured polished tiles, (1st quality) area of each tiles not exc 0.36 sqm , as in verticle surfaces etc. set and jointed in neat cement slurry and pointed in white cement and pigment to match laid over and including 10 mm thick screeding in CM 1:4 complete all as specified (Note : screed bed shall not be measured and paid separately).

Demolition of reinforced concrete of any description and in any position not otherwise specifically provided for including removing of demolished material from site complete all as specified and as directed.

Material and labour for 75mm thick PCC (1:3:6), type C-2 (using 40 mm graded crushed stone aggregate ) as in plinth protection; pathway / hardstanding etc laid in bays / panels not exc. 2.00 Sqm each including construction joints at suitable interval and each corner and filled with bituminous mastic filling (1 part bitumen & 3 part sand) and finished the surface even and smooth without using extra cement complete all as specified.

Material and labour for 75mm thick PCC (1:3:6), type C-2 (using 40 mm graded crushed stone aggregate ) as in sub base for path way / hard standing finished even and fair to receive chequered / interlocking tiles complete all as specified.

Material and labour for prepolished chemically treated coloured chequered cement concrete tiles of size 300 mm x 300 mm x 25 mm thick set, jointed and pointed in neat slurry in floors and steps with grey cement and pigments laid over and including 15mm thick screed bed or bedding layer in cement mortar (1:6) complete all as specified ( Note : screed bed shall not be measured and paid separately).

Material and labour for 80 mm thick coloured rubber moulded machine pressed precast conctete interlocking paver block chemically treated any shape , size and colour confirming to IS 15658-2006 of M-40 Grade with grey cement and pigment over and including 25 mm thick sand cushion spread and laid levelled in layers complete all as specified.

Suppy and fixed in repairs, powder coated aluminium anodised window frame sliding type 3 (three) tracks, (aluminium sections for frame weighing not less than 1.67kg/mtr) and shutter frame aluminium section weighing not less than 0.55kg/mtr) 1 (one) gauge and 2(two) glazed shutter including necessary jointing cleats glazing clips, rubber gasket aluminium anodised snap beading, screws, hold fast, locking arrangements, handle and 4mm thick tinted glass fixed in panels and stainless steel gauge mosquito proof wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm complete all as directed.

Suppy and fixed in repairs, aluminium anodized louvered ventilators with glass louvers , without sash bars, of aluminium sections weighing 0.55kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings and with suitable locking arrangements tc.complete all as specified.

Supply and fixing in repair factory made steel window with side hung shutters including projecting type hinges with steel handles, and steel peg stay, fixing lugs complete with glazing bar devetailed or welded including one shop coat of red oxide primer compete all as specified and as directed.

Supply and fixing in repair factory made steel window with side hung shutters including projecting type hinges with steel handles, and steel peg stay, fixing lugs complete without glazing bar devetailed or welded including one shop coat of red oxide primer compete all as specified and as directed.

Supply and fixed in repairs mild steel framed work such as grills , gratings, etc., with ends of bars shouldered and/ or riveted, or forged in to spikes; framed guard bars ; barred iron doors; ladders; framed balusters ; walk ways ; railings; frame work of water tanks and similar work conforming to Fe-290-Gde E-165 complete all as specified and directed.

Supply and fixing 3 mm thick (nominal) Sheet glass, ordinary quality , in squares, not exceeding 0.50 sqm each each pane fixed with oil putty complete all as specified.

Supply and fixed stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and as directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for, removing of unserviceable material from work site complete all as specified and as directed.

Dismantling of corrugated asbestos cement in roof coverings including ridges, removing of unserviceable material from work site complete all as specified and as directed.

Supply and fixed Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws as specified.

Supply and fixed Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa of profile tile / khaprail as in roof covering/ cladding to wall, fixed with self tapping screws as specified.

Supply and fixed Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in as in ridges, valley, eaves, etc with self tapping screws as specified.

Supply and fixed rolled mild steel in roof trusses, ( framed), trussed purlins, crane gantries, rails and fastenings and heavy bracket framing ( Beam, tee,angle,channel or flat sections ) including distance pieces , cleats etc. grade Fe-410-W ( Gde-E-250) quality -B complete all as specified.

Suppy and fixed in repairs, powder coated aluminium sections weighing 0.55kg/m as in aluminium partition including necessary joining cleats, glazing clips, rubber packing, beading aluminium snap beading, screws, etc. including drilling in wali, floor and ceiling (minimum thickness of powder cotaing 50 micron) including 12mm thick prelaminated particle board / 5.5 mm thick tinted glass fixed in panel complete all as specified.

Supply and Fixing in repairs PVC wall lining consisting of 5mm thick single side prelam wood grain PVC sheet inclusive of solvent cement and fixing at site on PVC frame including PVC sheet fillet of width 35mm as per specification and drawing complete all as specified.

Material and labour for preparation of new steel surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamelled paint (1st quality) over one coat of red oxide Zinc chrome primer complete all as specified.

Taking down chowkats with shutter (without taking off shutter from the frame) not exc 1.5 sqm each etc including removing material from work site complete all as specified and directed.

Supply and Fixing solid PVC door frame of size 50 mm X 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube supply & fixing in opening as per specification & drawing and as directed.

Supply and Fixing factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side as gap insert for top rails bottom rail, panelling of plain colour PVC sheet to be fitting in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement, supplying & fixing in the frame at site as per specification and drg and as directed.

Supply and fixed of 100 mm long stainless steel butt hinges complete all as specified and directed.

Supply and fixing 150 mm size Extruded aluminium alloy handles, fabricated type, anodised complete all as specified.

Supply and fixing 150 mm size aluminium, anodised, barrel tower bolts of extruded section and fixed, complete all as specified.

Supply and fixing 300 mm long Aluminium alloy. Anodised, sliding door bolt with hasp, staple ( bolt type) and fixing clips of sheet , cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed complete all as specified.

Taking down chowkats with shutter (without taking off shutter from the frame) exc 1.5 Sqm but n exc 4 sqm each etc including removing material from work site complete all as specified and directed.

Taking down shutters of any description exc 1 sq.m and n exc 2 sq.m each and including removing material from work site complete all as specified and directed.

Supply and fixed rolled mild steel in framed work as in doors chowkats including supplying and welding of butt hinges etc .grade Fe-410-W ( Gde-E-250) quality -B complete all as specified.

Supply and fixed 35 mm thick factory made door Flush shutters , solid core construction, with particle board core and plywood face panels, commercial type on both sides including for the provision of suitable blocks for mortice locks, latches or other fittings etc complete all as specified and directed.

Supply and Fixing factory made Solid PVC Moulded Door Shutter, 28 to 30 mm thick (stiles),with 2, 4, or 6 raised panel design with 4mm thick Moulded prelam PVC Sheet on the front face and 4mm Plain colour PVC sheet on back face, with particle board core fixing in frame at site as per specification & drawing complete all as specied.

Material and labour for mild steel flat iron, as in wind ties or as in hold fast, hooks for hanging fans , clamps, supports for rainwater, ventilating pipes, including bolts,including drilling holes, notching for wire , etc.; flat iron fillets ( for securing wire mesh etc. including all necessary drilling , bolting or rivetting , etc., and similar work conforming to Fe-290-Gde E-165 all as specified and directed.

Material and labour for preparation of untreated new wooden surface of any description over 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint, (1 st quality) with a coat of pink primer all as specified and directed.

Supply and Fixed in repairs special pivot for aluminium door made up of aluminium die-cast body complete all as specified and directed.

Supply and fixed in repairs stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and as directed.

Supply and fixed in repairs cast brass chromium plated shower rose 125 mm size with or without swivel joints, any size, including fixing to steel pipe or union in repairs complete all as specified.

Supply and fixed in repairs low level flushing cistern (dual-flush), 9-10 litres capacity ISI marked embossed moulded from virgin poly propylene including flush pipe complete all as specified and directed.

Supply and fixed in repair, 15 mm bore dia of pipe , chromium plated ,pillar taps, fancy type, cast copper alloy , with capstan heads, screwed down for 15 mm bore pipe,high pressure , with or without l'ettered ' 'HOT' or 'COLD' with long screwed shanks and fly-nuts , screwed for iron pipe complete all as specified.

Supply and fixed in repairs, Chromium plated Bib taps long body with cup , cast copper alloy with crutch handle, screwed for 15 mm bore dia. iron pipe or for brass ferrule and fixed complete all as specified.

Supply and fixed in repair CP angular stop cock single way with flange fancy type, screwed down for 15 mm bore dia. pipe, high pressure, with crutch handle, screwed externally both ends for unions etc. and fixed complete all as specified .

Supply and fixed in repairs of Vitreous China bowl urinal flat back, size of 465x355x265 mm White ( minimum) including providing and fixing plugs, bedding the urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement and providing grating and union for discharge pipe including 32mm bore PVC discharge pipe complete all as specified and as directed.

Supply and fixed in repairs vitreous china wash basin (WHB) , white , flat back , size 550 mm x 400 mm (1st quality) including brackets, waste fittings , brass Chromium plated for glazed basins etc. with long screw shanks and fly nuts , flange end embedded in red lead cement , including cutting for and pinning in ends of brackets or erecting stand but but incl providing brackets, waste pipe & CP waste coupling , PVC connection 450 mm long complete all as specified and as directed.

Supply and fixed in repairs PTMT connections 15 mm size with PVC nuts of length 450 mm complete all as specified.

Supply and fixed in repairs of grating dome 100/75 mm dia of PTMT (Minimum weight 40gms) with waste hole complete all as specified.

Supply and fixed in repairs vitreous China white Squatting pan ,'Orissa' pattern size 580 mm x 440 mm with integral footrests water closet) with 'P' or 'S' trap front or back inlet complete including lime concrete for bedding, connection to drain pipe and to flushing pipe , anti syphonage pipe etc complete all as specified.

Supply and fixed in repairs white vitreous china wash down water closet pan (pedestal pattern) EWC, with ‘P’ or `S' trap, including fixing bolts, Plastic water closet seat and cover, closed pattern with flat bottom, and mild steel chromium plated or aluminised hinging device, including making all necessary connections complete all as specified and as directed.

Supply and fixed in repair, CP stop cock ( concealed type) long fancy type screwed down for 15 mm bore dia. pipe, high pressure, with crutch handle , screwed externally both ends for unions etc. and fixed complete all as specified

Supply and fixed in repairs of 110 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls with necessary clamps complete all as specified including taking down old unserviceable pipe including fittings.

Supply and fixing in repairs PVC (SWR) bends 110 mm bore of any radius without acess door complete all as specified

Supply and fixed in repairs of 75 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls or laid in floor, trenches complete all as specified.

Supply and fixed for 75mm dia PVC (SWR) bend of any radius for PVC (SWR) pipes, fixed to floor or fixed in floor complete all as directed.

Taking up or down steel tubing or CPVC pipe and connections, including cleaning for re-fixing and removal of unserviceable pipe from work site,15 mm bore dia all as directed.

Taking up or down steel tubing or CPVC pipe and connections, including cleaning for re-fixing and removal of unserviceable pipe from work site, 20 mm bore dia all as directed.

Supplying , laying, jointing and testing 15 mm nominal bore Steel water tubes, 'medium grade' ,galvanised , with all fittings ; fixed to walls and ceilings or laid in floors complete all as specified.

Supplying , laying, jointing and testing 20 mm nominal bore Steel water tubes, 'medium grade' ,galvanised , with all fittings ; fixed to walls and ceilings or laid in floors complete all as specified.

Refixing old steel tubing and connections in new or old position ( walls, ceiling , floors, etc.)15 mm nominal bore dia, including new fittings complete all as specified ( Note:- Refixing means including cleaning down existing pipes and fittings. )

Refixing old steel tubing and connections in new or old position ( walls, ceiling , floors, etc.)20 mm nominal bore dia, including new fittings complete all as specified ( Note:- Refixing means including cleaning down existing pipes and fittings. )

Demolition Brickwork or stone boulder masonry, built in cement mortar or cement lime mortar including all quoins,arches, pillars,etc. but excluding ashlar facings, dressed stonework and precast concrete articles including removing of demolished materialfrom work site complete all as specified.

Material and labour for brickwork with fly ash bricks, old size, having compressive strength 75Kg sqcm, straight or curved on plan excd 6 M mean radius in built in cement and sand mortar 1:6 complete all as specified.

Material and labour for brickwork with fly ash bricks, old size, having compressive strength 75Kg sqcm, straight or curved on plan to any radius in half bricks built in cement and sand mortar 1:4 complete all as specified.

Taking down cement plaster on brick or stone walls etc. including racking out joints, hacking for key, scrubbing down with water, any description etc.including removing of rubbished material from work site complete all as specified.

Material and labour for rendering 15 mm thick on fair faces of brick work or concrete surfaces , in cement and sand mortar 1:4 using water liquid water proofing compound @ 200 ml per bag of cement or as per manufacturer's instructionscomplete all as specified top surfaces finished even and smooth without using extra cement complete all as specified. (WPC shall be measured and paid separately)

Material and labour for rendering 5mm thick on concrete surfaces in ceiling , in cement and sand mortar 1:3 complete all as specified

Material and Labour for rendering 15 mm thick on fair faces of brick or concrete surfaces finishing surfaces even and smooth without using extra cement in Cement mortar 1:6 all as specified and directed.

Supply only Integral liquid water proofing compound conforming to IS-2645-2003 complete all as specified.

Material and labour for preparation of new plastered surfaces of facia, roof projection,chajja, walls etc. and applying wall care white (Putty) of required thickness and sand papering surfaces to achieve smooth surfaces and applying two coats exterior emulsion paint 100% acrylic, white or any tinted, over a coat of cement based primer including washing floors, cleaning glass, joinery,electrical fittings, wiring etc., of drops and splashes complete all as specified .

Material and labour for preparation of new/untreated surfaces/ of walls and applying two coats of colour wash over a coat of white wash including washing floors, cleaning glass, joinery,electrical fittings, wiring etc. , of drops and splashes complete all as specified .

Material and labour for preparation of newly plastered surfaces of walls by applying one coat of wall care white (putty to achive even & smooth surfaces and sand papering surfaces to achieve smooth surfaces and applying acrylic based distemper, two coats, white or any tinted over a coat of alkaline resistant primer including washing floors, cleaning glass, joinery,electrical fittings, wiring etc. , of drops and splashes complete all as specified .

Material and labour fo preparation of new plastered or unplastered surafces of ceilings and applying three coats of white wash including washing floors, cleaning glass, joinery,electrical fittings, wiring etc. , of drops and splashes complete all as specified .

Suppy and fixed in repairs, powder coated anodised aluminium frame (sections weighing not less than 1.40kg/mtr) made of Square/tubular Aluminium section for door with one or more rebates jointing cleat for fixing etc and provision of aluminium door shutter (section weighing not less than 0.55 kg/mtr) (Single/Double shutter) including necessary jointing cleats glazing clips, rubber gasket aluminium anodised snap beading, screws, hold fast, Aluminium hinges 3Nos 100mm long for each shutter, floor stopper, locking arrangements with bra mortise lock six lever 100 mm in size with key in duplicate, handle 2 nos for each door including 12mm thick decorative prelaminated particle board and 5.5 mm thick tinted glass in lower and upper panel respectively complete all as specified .

Suppy and fixed in repairs, powder coated anodised aluminium frame for doors, windows, ventilators with one or more rebates including jointing cleat for fixing etc. complete all as specified. Note: Powder coating 50 micron minimum thickness.

Material and labour for taking down and refixing in same opening aluminium door shutter exc 1 sqm but not exc 2.00 sqm including easing & adjusting and refixing with same hardware etc after necessary repair works / eassing and adjusting complete all as specified and directed.

Supply & fixing in repair Double action floor spring hydraulically regu-lated made up of mini-mum 1.25 mm thick alu-minium alloy sheet foun-dation box,main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and directed.

Supply and fixing in repairs aluminium body ( extruded section ) body Door closer hydraulically regulated, designation No. 3, universal type , suitable for door shutters 851 to 1000 mm in width and of weight between 61 to 80kg complete all as specified.

Supply and fixing in repairs 4mm thick tinted glass, fixed with existing snap beading, rubber gasket etc. area of each pane exc. 0.50 sqm complete all as specified and as directed.

Supply and fixing in repairs chromium plated health faucet 25 mm dia with 1.5m flexible tube and wall hook fixed in position complete all as directed.

Supply and fixed in repairs CP Brass water Jet assembly with flexible PVC pipe 1.0 metre length connector to EWC water closet complete all as specified.

Supply and fixed in repairs plastic water closet seat cover white closed pattern /anglo indian type with flat bottom and cover incl aluminium hinging devices complete all as specified.

Supply and fixed in repairs toilet paper holder chromium plated of approved quality complete all as specified and directed .

Supply and fixed in repairs in repair for fixing over crumple joints of 0.63mm thickness Plain, galvanised, mild steel sheeting, in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275 with screws complete all as specified and as directed.

Supply and fixing 40mm bore high density polyethylene pipes (HDPE) of pressure rating 6kgf/Sqcm fixed complete to floors, wall, ceilings etc complete all as specified and as directed.

Supply and fixed in repairs dia bore PVC (SWR) floor trap ,plain with grating including jointing with solvent cement 75/100 mm dia. outlet complete all as specified.

Material and labour for preparation of old plastered or unplastered surfaces of wall by brooming down or steel wire brushing ; scrapping down smoke soot , moulds, moss and efflorescent salts and treating oil and greasy spots and applying one coat of colour wash on old decorated surfaces of walls including washing floors, cleaning glass, joinery,electrical fittings, wiring etc. , of drops and splashes complete all as specified .

Material and labour for preparation of old plastered or unplastered surfaces of wall by brooming down or steel wire brushing ; scrapping down smoke soot , moulds, moss and efflorescent salts and treating oil and greasy spots and applying one coat of white wash on old decorated surfaces of wall including washing floors, cleaning glass, joinery,electrical fittings, wiring etc. , of drops and splashes complete all as specified .

Material and labour for preparation of old plastered or unplastered surfaces of ceiling by brooming down or steel wire brushing ; scrapping down smoke soot , moulds, moss and efflorescent salts and treating oil and greasy spots and applying one coat of white wash on old decorated surfaces of ceiling including washing floors, cleaning glass, joinery,electrical fittings, wiring etc. , of drops and splashes complete all as specified .

Material and labour for preparation of old decorated distempered surfaces of walls by washing, rubbing down and stopping of distempered and painted surfaces and distempering walls by applying one coat of acrylic based distemper of any tint/shade complete all as specified.

Material and labour for preparation of old decorated distempered surfaces of ceiling by washing, rubbing down and stopping of distempered and painted surfaces and applying one coat of acrylic based distemper of any tint/shade complete all as specified.

Material and labour for preparation of old decorated surfaces of walls, chajja,facia, roof projection etc. by washing, rubbing down and stopping and applying one coat of exterior emulsion paint 100% acrylic, white or tinted on old painted surfaces of walls including, cleaning glass, joinery,electrical fittings, wiring etc., of drops and splashes complete all as specified .

Material and labour for preparation of old painted wooden /wood based materials surfaces of any description, not otherwise described, over 10 cm width or girth and painting one coat with synthetic enamel paint (1st quality) including cleaning, stopping and rubbing down and removing all dropings etc. all as directed.

Material and labour for preparation of old painted steel and iron surfaces of any description , not otherwise described,over 10 cm width or girth and painting one coat with synthetic enamel paint including cleaning, stopping and rubbing down and removing all drops etc. complete all as speciified.

Dismantling wall and ceiling boards ( fibre, pulp, insulation ,etc. ) or insulation boards/slabs/blankets, any thickness, including cover fillets complete all as specified.

Material and labour for false ceiling with GI powder coated frame work and 4 mm thick, (E-board) non asbesto fibre reinforced cement board , Reinforced Designer Board tiles conforming to IS-14862 and ISO-8336 , of approved texture at all height duly suspended ceiling laid on hot dip galvanised iron imposed grid of size 600 mm x 600 mm, T section / Angle section including cutting holes in brick wall and making good surface with cement concrete 1:2:4 type B-0 / 1:3 cement mortar complete all as specifiedand having following details: (a) 27mm x 27 mm angle 0.55 mm thickness, GI powder coated hot dip galvanised plugged at the rate 600mm centre to centre alongwith the perimeter of wall. (b) 25 mm x 25 mm Tee 0.55 mm thickness, GI powder coated hot dip galvanised as main and cross runner suspended with 1.6 mm dia GI wire suspendrs (not exc. 1.20 mtr length) with adjustable clamps and dash true fastners plugged in RCC slab or angle iron runner of slopped roof placed at the rate 600 mm centre to centre alongwith the perimeter of wall. Note: The work shall be carried out as per manufacturer instruction and as directed.

INTERNAL ELECTRIFICATION Taking down carefully aluminium conductor point wiring (light,fan,socket or power) complete including fittings such as switches,ceiling roses, pendants, regulators ,sockets etc. and removing (except those to be reused shall be kept in safe custody at the site ) and making good disturbed surfaces of walls, floors etc.to match with the existing complete all as specified.

Material & Labour for consealed type point wiring with 1.50 Sqmm (nominal cross sectional area) PVC insulated (FRLS) unsheathed single core multi stranded copper conductor cable of working voltage 1100 volts grade conforming to IS-694 Pt I & II of 2000 drawn through and including PVC conduit of adequate size having a wall thickness not less than 1.5 mm with all accessories (including cutting chases & making good the disturbed surface to its original specification), including provision of 1.5 Sqmm (nominal cross sectional area) PVC insulated (FRLS) unsheathed single core multi stranded copper conductor cable as earth continuity conductor, connected to main switch / DBs or common earth dolly for one light / fan point / exhaust fan/ bell point controlled by one 5 Amps one way switch complete all as specified and as directed . Note: Red coloured cable shall be used for live connection, black coloured cable shall be used for neutral connection and green coloured cable shall be used for earthing. Separate cable for earthing and neutral to be used for each individual circuit from the distribution board.

All as per item No.110 here-in-before but for one socket out let 5/6 amps point on the independent board

All as per item No.110 above but One socket out let 5/6 amps point on the same board complete all as specified.

Material and labour wiring for 5/6 pin 6/16 Amp switch socket combination on independent boards controlled by one, one way switch using 2.5 sqmm nominal cross sectional area multistranded copper conductor, PVC insulated unsheathed FRLS cables in and including 20 mm dia or higher size PVC concealed conduits and fittings, including pressed steel terminal switch boxes, 3 mm thick bakelite sheet top cover (ISI Marked) fitted with chromium plated brass screws & washers and 2.5 sqmm nominal cross sectioanl area multistranded copper conductor , PVC insulated unsheathed FR earth wire and connecting to earth dolly and brass screws, washers etc. including cutting chases pinning in for concealed conduit wiring and making good of disturbed surface n exc 15 cm girth complete all as specified.

Supply and fixed switch piano flush type, single pole , 6 Amps, one way complete all as specified.

Supply & fixed Bell push , flush type , 5/6 amp complete all as specified.

Supply and fixed socket 2 in 1, 5 Pin, 5/6 amps, any type complete all as specified and as directed.

Supply and fixed socket combination 2 and 3 Pin, 5/6 amps, multipurpose of any type flush type controlled by one switch complete all as specified.

Supply and fixed switch socket combination 2 in 1, 5 Pin, 5/16 amps, any type complete all as specified and as directed.

Supply & fixed ceiling rose surface bakelite 65 mm x 50 mm two to three terminal suitable for 230 Volts AC 6 Amps complete all as specified.

Supply & fixed stepped type electronic fan regulator flush type 240 Volts ISI marked complete all as specified .

Supply & fixed lamp holder, PVC/polycarbonate type with back plate straight or anglar suitable for batten fittings complete all as specified.

Supply and fixed in repairs switch piano flush type, single pole , 6 Amps, one way complete all as specified.

Supply and fixed in repairs socket 2 in 1, 5 Pin, 5/6 amps, any type complete all as specified and as directed.

Supply and fixed in repairs socket combination 2 and 3 Pin, 5/6 amps, multipurpose of any type flush type controlled by one switch complete all as specified.

Supply and fixed in repairs switch socket combination 2 in 1, 6 pin 5/6 amps and 15/16 amps multipurpose, of any type complete all as specified.

Supply & fixed in repairs ceiling rose surface bakelite 65 mm x 50 mm two to three terminal suitable for 230 Volts AC 6 Amps complete all as specified.

Supply & fixed in repairs lamp holder, PVC/polycarbonate type with back plate straight or anfular suitable for batten fittings complete all as specified.

Supply & fixed in repairs stepped type electronic fan regulator flush type 240 Volts ISI marked complete all as specified .

Supply & fixed in repairs Bell push , flush type , 5/6 amp complete all as specified.

Supply & fixed LED white glass Lamp 1 x 09 Watts, 230V Base-22 complete all as directed.

Supply & fixed in repairs LED Lamp 1 x 20 Watts, 230V Base-22 complete all as directed.

Supply and fixing of LED light fittings 1 x 18/20 watts 230 Volt white powder coated slim box type batten made of formed CRCA with snap on installer LED lighting fixture with and including 1x18/20 watt T8 single side connection retrofit LED tube with G13 lamp holders, connector block, complete with all accessories internally pre-wired and including connecting up with three core twisted flexible copper conductor cable up to cealing rose complete all as specified and directed.

Supply and fixing in repairs ultra bright LED tube light 1 x 18 watts energy efficient, 230 V (single side connection) fixing to existing tube light fitting with all accessories internally pre-wired and including connecting up with three core twisted flexible copper conductor cable all as specified and directed.

Supply and fixed in repairs new generation energy saving and environmental friendly long life LED street light fitting with 25 watts LED made up of pressure die cast aluminium housing with high power LED as lighting source and lens embedded PC cover having top opening including separate driver comportment with IP 66 protection & impart resistance of IKO7 with operating voltage range of 140V to 270 V olts, 120 Lumen per watt complete with all accessories internally pre-wired and including connecting up with three core twisted flexible copper conductor cable up to cealing rose to fitting and GI pipe bracket made our of GI pipe medium grade 32mm dia 1.5 mtr long bend to required shape complete all as specified.

Supply and fixing bulk head fitting suitable for 1X 10Watt LED surface mounted energy saving, decorative oval type , IP 66 protection and necessary electric connection with PVC insulated twin twisted flexible copper wire with and including one No 10 Watt LED lamp and all accessories, complete all as specified and as directed.

Supply and fixing LED tube light fittings 1 x 9/10 watts energy efficient, 230 V incl 1x9/10 watt LED tube, surface / wall mounted LED batten with aluminium housing and integrated driver including holders, connector block etc. complete with all accessories internally pre-wired and including connecting up with three core twisted flexible copper conductor cable all as specified and directed.

Supply and fixed in repairs 15 watt LED lamp Post top lantern Black ABS plastic spigot, spun aluminium canopy with opal acrylic diffuser and accessories , integral fedora hat post top lantern with clear acrylic for mounted on post and 2 metre long GI tubing medium grade 50mm dia including grouted in ground with with necessary PCC work , making connection with two single core 1.5 sqmm stranded copper conductor cable from connector to light fitting all as specified.

Supply and fixed in repairs recessed mounted 2' x 2 ' LED luminaire 34 watts for grid ceiling minimumm lumen output 4320 lumen, pre-treated CRCA frame powder coated with diffused Profied including necessary connection complete all as specified and directed.

Supply and fixing in repairs hylam sheet 3 mm thick white in colour of size 130 mm x 180 mm complete all as specified and directed.

Supply and fixing in repairs hylam sheet 3 mm thick white in colour of size 120 mm x 170 mm complete all as specified and directed.

Supply and fixing in repairs hylam sheet 3 mm thick white in colour of size 230 mm x 280 mm complete all as specified and directed.

Supply and fixing in repairs hylam sheet 3 mm thick white in colour round type of size 80 mm dia i complete all as specified and directed.

Materials and labour for Sub main wiring with 2 runs of 6.00 Sqmm (nominal cross-sectional area) PVC insulated unsheathed single core flame retardant cable (FRLS) of working voltage 1100 volts grade with stranded copper conductor including one run of 6.00 Sqmm (nominal cross sectional area) PVC insulated unsheathed flame retardant cable (FRLS) with stranded copper conductor as continuous earth wire connected to main switches DBs or in common earth dolly, drawn through and including PVC rigid non- metallic PVC conduit / casing and capping ISI marked , medium garde of adequate size with all conduit / casing and capping accessories ISI marked as required complete all as specified and as directed including taking down old unserviceable / burnt / damaged one. [NOTE : Two run of sub main wiring cable along with one run of earth wire and one run of PVC Conduit / casing and capping shall be measured as one length]

Materials and labour for Sub main wiring with 2 runs of 4.00 Sqmm (nominal cross-sectional area) PVC insulated unsheathed single core flame retardant cable (FRLS) of working voltage 1100 volts grade with stranded copper conductor including one run of 4.00 Sqmm (nominal cross sectional area) PVC insulated unsheathed flame retardant cable (FRLS) with stranded copper conductor as continuous earth wire connected to main switches DBs or in common earth dolly, drawn through and including PVC rigid non- metallic PVC conduit / casing and capping ISI marked , medium garde of adequate size with all conduit / casing and capping accessories ISI marked as required complete all as specified and as directed including taking down old unserviceable / burnt / damaged one. [NOTE : Two run of sub main wiring cable along with one run of earth wire and one run of PVC Conduit / casing and capping shall be measured as one length]

Supply & fix sheet metal enclosure for 8 way Distribution Boards (DB’s), double door , single pole and neutral with 200 amps rated bus bar, including bus bar neutral link, earth bar and din rail, IP-43, IK-09 protection including gasket and door earthing suitable for fixing MCBs/isolators fixed on wall surface and making good the disturbed surfaces of wall and connecting up including taking down old unserviceable one including MCCB / MCB complete all as specified and as directed.

Supply and fixed in repairs epoxy powder coated sheet metal enclosure for DBs, double door (when MCBs to be used), Triple pole and neutral 415 V, 4 ways with mounting fitted with bus bar, DIN channel , neutral link and incoming contact complete all as directed.

Supply and fixed in repairs MCB SPN 6-32 Amps, 'C' series 10kA, 240 Volts and to be housed in DBs complete including necessry connection all as specified and directed. (Note :- Proper and suitable size cable lugs to be fixed with MCB are included in unit rate of each MCB of any rating).

Supply and fixed in repairs MCB SPN 40-63 Amps, 'C' series 10kA, 240 Volts and to be housed in DBs complete including necessry connection all as specified and directed. (Note :- Proper and suitable size cable lugs to be fixed with MCB are included in unit rate of each MCB of any rating).

Supply and fixed in repairs MCB SP, 6 to 32 Amps, 'C' series 10kA, 240 Voltsand to be housed in DBs including necessry connection complete all as specified and directed. (Note :- Proper and suitable size cable lugs to be fixed with MCB are included in unit rate of each MCB of any rating).

Supply and fixed in repairs for Single pole and neautral enclosure with a two pin and earth plug and socket complete with one single pole MCB, 20 Amps, 240 Volts, including necessry connection complete all as specified including taking down old one

M/s. MD IRSHAD

M/S MOHAN KUMAR BANSAL

SHRI PRADEEP PARIK

M/S MAJUMDER CONSTRUCTION