Additional AND Renovation work of MC office Building at Ner Chowk

Amount

Earth work in excavation by mechanical means (Hydraulic excavator)/ manual means in foundation trenches or drains (not exceeding 1.5m in width or 10 sqm on plan),including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soils as directed, within a lead of 50 m

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size)

Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) upto plinth level with :Cement mortar 1:6 (1 cement : 6 coarse sand)

Half brick Masonary with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in :in CM 1:4(1Cement :4 Sand)

Providing and laying cement concrete 1:2:4(1cement: 2sand: 4graded stone aggregate 20mm nominal size) and curing complete

Providing and laying 60mm thick faciory made cementconcrete interlocking paver block of M -30 grade madeby block making machine with strong vibratorycompaction, of approved size, design & shape, laid inrequired colour and pattern over and including 50mmthick compacted bed of coarse sand, filling the jointswith line sand etc. all complete as per the direction of Engineer-in-charge.

Brick work with common burnt clay machine moulded perforated F.P.S. (non modular) bricks of class designation 12.5 conforming IS : 2222 in exposed brick work including making horizontal and vertical grooves 10mm wide 12 mm deep complete in cement mortar 1:6 (1 cement : 6 coarse sand). above plinth level upto floor V level

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth levelMild steel and Medium Tensile steel bars

15mm cement plaster in single coat on rough side of brick/concrete/stone walls for interior plastering upto floors two level including arises, internal rounded angles, chamfers and/or rounded angles not exceeding 80mm in girth and finished even and smooth including all leads and lift including all type of carriage. in cement mortar 1:4(1cement:4sand)

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length ( hold fast lugs or dash fastener shall be paid for separately). Sal wood

Providing and fixing glazed shutters for doors, windowsand clerestory windows using 4 mm thick float glasspanes, including ISI marked M.S. pressed butt hingesbright finished of required size with necessary screws Second Class Deodar Wood

Providing and fixing wire gauge shutters using galvanized M.S. wire gauge of average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm, for doors, windows and clerestory windows with hinges and necessary screws :35 mm thick shutters.

Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours,shades except burgundy, bottle green, black of any size as approved by Engineerin-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.

Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joint with white cement & matching pigments etc. complete. Size of Tile 600x600 mm

Centering and shuttering including strutting, propping etc. and removal of form work for :Retaining walls, return walls, walls (any thickness) including attached pilasters,buttresses, plinth and string courses fillets, kerbs and steps etc.

Providing and fixing Chlorinated Polyvinyl Chloride(CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc.15 mm nominal outer dia Pipes

Providing and fixing high pressure PVC spigot and socket, waste and ventilating pipes ISI marked (working pressure 4 kg / sqcm.) including waste fixing with approved adhesive etc. complete. 75mm dia.

Providing and fixing PVC door bend with oval access door, insertion rubber washer 3 mm thick bolts and nuts complete including fixing with approved adhesive etc. complete.75 mm door bend.

Providing and fixing PVC floor trap of self cleaning design including fixing with approved adhesive, cost of cutting and making good the wall and floors etc. complete. 110 mm X 75 mm.

Providing and fixing P.V.C. low level flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete. 10 litre capacity - White

Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. Semi rigid pipe. 32 mm dia.

Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: White Vitreous China Wash basin size 630x450 mm with a single 15 mm C.P.brass pillar tap

Providing and fixing C.P. brass angle valve for wash basin mixer and geyser points of approved quality conforming to IS:8931 : 15 mm nominal bore

Providing and fixing Stainless steel grating of approved quality and colour. Circular type: 100 mm nominal dia.

Providing and placing on terrace (at all floor levels)polyethylene water storage tank, IS : 12701 marked,with cover and suitable locking arrangement and makingnecessary holes for inlet, outlet and overflow pipes butwithout fittings and the base support for tank. 1000 Ltr filling capecity.

Providing and fixing G.I. inlet connection/ outlet connection for water tank.(Similar Item of item No.18.15.2)

Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipeand making long screws etc. complete (New work) :15 mm dia nominal bore.

Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :20 mm dia nominal bore

Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete : 200x10 mm

Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete:75mm

Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc. Internal work - Exposed on wall.: 1 5 mm nominal bore

Providing and fixing G.I.Union of approved quality : 15 mm nominal bore

Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : W.C. pan with ISI marked white solid plastic seat and lid

Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works

Providing and Fixing 0.50 (Zero point Fifty Millimeter) thick Pre -Painted Sheet Sheet in roofing with hot dipped metallic zinc coated sheet with top coat of regular modified polyester (RNP) Organic Coating of 20 (Twenty ) Microns over 5(Five) Microns Primary coating to back coat of polyester of 5(Five) Microns over 5(Five) Microns primary coating i/e fixing with pre-painted iron J or L Hocks bolts and nuts 6mm (Six Millimeter ) dia meter with pre- painted limpet and rubber washers complete with all accessories as required as per the direction of Engineer -in-Charge including carriage of materials with in all leads. lifts and other incidentals.

Providing and Fixing Liner Sheet 0.35 (Zero point Fifty Millimeter) thick Pre -Painted Sheet Sheet in roofing with hot dipped metallic zinc coated sheet with top coat of regular modified polyester (RNP) Organic Coating of 20 (Twenty ) Microns over 5(Five) Microns Primary coating to back coat of polyester of 5(Five) Microns over 5(Five) Microns primary coating i/e fixing with pre-painted iron J or L Hocks bolts and nuts 6mm (Six Millimeter ) dia meter with pre- painted limpet and rubber washers complete with all accessories as required as per the direction of Engineer -in-Charge including carriage of materials with in all leads. lifts and other incidentals

Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer’s specification Two or more coats on new work

DEVINDER KUMAR

Mithil Walia