Loading…
Loading…
Tender Value
₹14.6 L
EMD Value
₹14,600
Closing Date
12 Jun 2026, 6:00 pm7d left
Executive Engineer, GSPHCL, Gandhinagar
Providing & fixing Alluminium sliding window of SRP Barrack and Renovation and furniture work of DCI (A & T) chamber & Smack Control Room at 2nd floor of Policebhavan, Sector-18, Gandhinagar (Including Electrification)
309897
NIT No. 02 of 2026-27 (Sr.No.3) (SBD) (5th Attempt)
Open
Civil Works - Others
Gandhinagar
11 documents required · 8 mandatory · 3 optional
₹900
GUJARAT STATE POLICE HOUSING CORPORATION LTD, Payable at Gandhinagar
₹14,600
30 May 2026
30 May 2026
30 May 2026
12 Jun 2026
30 May 2026
SCHEDULE -B WITH RATE
Total Rate in Words Total Amount
Total Rate in Words Total Amount
Sr No. Description As Per SOR 2024-25 Unit Rate
1 Dismentaling doors, windows, vetilators etc. (wood or steel) shutters including chokthas, architraves, holdfast and other attachment etc.complete and stacking 93.00 No. 261.29 Rupees Two Hundred Sixty One and
the material with all lead and lift. (ii) exceeding 3 smt in area. Paisa Twenty Nine Only
2 Providing and Fixing Granite Telephonic Black Colour 18 mm thick for jambs and sills of doors & windows using neat cement slurry laid over 20 mm average base 90.00 Smt 2428.00 Rupees Two Thousand Four Hundred
of cement mortar 1:1(1 cement:1 Coarse Sand) and jointed with grey cement slurry including racking(Tancha Work) rubbing and polishing,scaffoldings,tools and Twenty Eight Only
tackles,scaffolding etc. complete(with base of neat cement) as per direction of Engineer in charge rate are also including fully rounding the exposed edges as
3 Providing and fixing Alluminium section window having extruded Aluminum Colour anodized section frame main outer size 95mm x 24mm x 1.17mm (of Jindal 126.00 Smt 1568.27 Rupees One Thousand Five Hundred
Section no:2459 @ wt.of 0.738 Kg/mt), horizontal Three track member size 92mm x 31.75mm x 1.30mm (of Jindal Section no:8688,@ Wt.1.07 Kg/mt), vertical Sixty Eight and Paisa Twenty Seven
member of size 92mm x 31.75mm x 1.50mm (of Jindal Section no:8933,@ Wt. 1.06 Kg/mt) with sliding shutters of horizontal member size 40mm x 18mm x
1.29mm (of Jindal Section no:8947@ wt.of 0.456 Kg/mt), vertical member of size 40mm x 18mm x 1.29 mm (of Jindal Section no:8949 @ wt.of 0.456Kg/mt) with
5 mm thick transparent bronze colour tinted float glass with powder coated aluminum fittings and fixtures and transparent silicon sealant glass fixing to frame as
per details including one mosquitoe jali shutter With Both Side Locking Arrangment for ALL FLOORS.
4 Distempeing (Two coats) with oil bound 124.00 Smt 79.88 Rupees Seventy Nine and Paisa Eighty
distemper of approved brand and manufacture and of required shade on wall surfaces to give an even shade, over and including a priming coat with distemper Eight Only
primer of approved brand and manufacture after thoroughly brushing the surface free from mortar dropping and other foreign matter and also including
preparing the surface even and sand papered smooth.
5 Dismantling alluminium partition asbestos Hard board in ceiling or partition walls, wooden trellis work including frames, stacking of the serviceable materials 112.00 Smt 56.23Rupees Fifty Six and Paisa Twenty
and disposal of unserviceable materials with all lead and lift Three Only
6 Gypsum False Ceiling Providing and fixing gypsum board ceiling as per manufactures' specifications incl. acrylic paint. Fixing of suspended 52.00 Smt 992.25 Rupees Nine Hundred Ninety Two and
gypsum plain false ceiling by using standard company section (GYPSTEEL ULTRA), which includes providing and fixing G.I. parameter channels of size 20 X 28 X 30 Paisa Twenty Five Only
X 0.55 mm thick having one flange of 20 mm and another flange of nylon sleeves and screws at 610 mm center. Then suspending G.I intermediate channels of size
15 X 45 X 15mm, 0.9 mm thick fixed with two flanges of 15 mm each from the sophist at 1220 mm center with ceiling angle of width 25 mm x 10 mm x 0.55 mm
thick fixed to sophist with G.I. cleat and steel expansion fasteners. Ceiling section of 0.55 mm. thickness having knurled web of 51 mm. and two flanges of 26 mm
each with lips of 10.5 mm. area then fixed to the intermediate
channel with the help of connecting clips and in direction perpendicular to the intermediated channel at 457 mm. center 12.5 mm tapered edge gypsum board 0.00 Rupees Four Hundred Seventy Six and
(conforming to is 2095-1982) is then screw fixed to ceiling section with 25 mm drywall screws at 230 mm center. Screws fixing is done mechanically either with Paisa Ninety Three Only
screwdriver or drilling machine with suitable attachment. Standard company manufactured section (GYPSTEEL ULTRA) should be used for the entire framework.
Finally the board are to be jointed and finished, so as to have a flush look which includes filling and finishing the tapered and square edges of the boards with
jointing compound, paper tape and two coats of primer suitable for Gyp-board (as per recommended practices of India Gyproc - Saint Gobain make). (also
including application of primer and preparing surface even & sand papered smooth with lapi, astar...) Including three coats with plastic emulsion paint of
approved brand & manufacture. Including all materials and labour etc. complete as per detail drawing and instruction of engineer-in charge.
7 Full Ht. Partition (Wooden) Providing and fixing full and low height partition and glass partition with installation upto ceiling or beam bottom as 15.00 Smt 3579.17 Rupees Three Thousand Five Hundred
per drawing and framing the skeleton (plywood frame structure) with 19mm + 19mm thick vertical and horizontal plywood (patti) both side cover with 6mm + Seventy Nine and Paisa Seventeen
6mm for grooving as per design. Fixing properly without any air gap and finishing with selected 1mm laminate. Before installation, make hole/face plate for Only
conduit pipes of electrical / networking cables with openable stud from partition Including all materials and labour etc. complete as per detail drawing and
instruction of engineer-in charge (Ref. Dwg. No. )
8 Wall Paneling Wall paneling on wall for electrical conducting and net wiring etc. made by 19 mm and 12 mm plywood framing, 1mm 3.00 Smt. 2116.80 Rupees Two Thousand One Hundred
approved laminate on surfaces openable facility with necessary hardware as per design and instruction as directed by site in-charge or architect.(Ref. Dwg. No. ) Sixteen and Paisa Eighty Only
Total Rate in Words Total Amount
Total Rate in Words Total Amount
Sr No. Description As Per SOR 2024-25 Unit Rate
9 Door Size 1.00mt. X 2.10mt. & Frame 100mm X 60mm with Single Door Shutter Only. 6.00 Smt 8399.74 Rupees Eight Thousand Three
Providing, Supplying and Fixing of 32mm (Total) Thick Flush Door Shutter with 1mm Thick Laminates on Both Side of Shutter. Making / Construction of Flush Door Hundred Ninety Nine and Paisa
is with Pine or southern Yellow Pine Filler and 2.5mm core veneer Both Side and 0.4mm Face Veneer on Both Side with Lock rail on Center. Flush Door Provide Seventy Four Only
with Teak wood beading patti (32mm X 12mm) on Peripheries of Flush Door with Door Frame of Non Teak Solid Wood of size 100mm x 60mm with Chemically
Treated and Seasoned Including Paint Matching with Laminates. Frame & Flush door shutter having 5 year warranty against attack of biological agent like termite,
borers, decay, fungi and harmful insects also warranty against seasoning related issues like crack, bending, twisting, warping. Laminates on shutter shall be press
by cold press method. Shutter shall be brought to site in packed PVC bags & pvc coating shall be removed on completion of work in such a way that shutter &
Frame is free from nail mark & any damages etc. Rates are also Inclusive of all Labors & Proviging 15cm. Long 6 No of Hold Fast (25mm X 5mm) & 3 No of 6 Inch
S.S. but Hinges, 100mm x 75 mm x 3mm thick, required Screw & Nails per Frame and Fixing following S.S. Fixtures And Fastening.
(1) Aldrops 1 No, 250mm x 16mm & Tadi 1 No, (2) Door Stopper 1 No, 100mm Long, (3) Double Leg Heavy Push Door Stopper 1 No & (4) Handle 2 No, 150mm
Long X 10mm thick. Door are Fixing as per Details Drawing & Instruction of Engineer in charge. All Materials Used Shall be as Per approved Material Make List of
G.S.P.H.C. The Required Frame is to be Obtained from Vanil Udhyog Maked Only.
10 Applying general insecticide pest control treatment to floors, cupboards etc including labour material etc. complete. Using Heptachloride 20 EC. As Per 67.00 Smt 90.72 Rupees Ninety and Paisa Seventy Two
6113_pests Consentration Weight 0.50 percent is recommended one litre chemical emulsion dillute with 39 liter of water will give. Total dillute concrentration Only
will be 40 litre inclusive of one litre chemical emulsion appication 0.5 Litre chemical / Sqm of surface is recommended as per I.S code
11 Roller Blind Providing and fixing Roller Blind curtain fixed on window level on wooden batten and curtain lift with cotton thin rope, design and colour as per 17.00 Smt. 2359.46 Rupees Two Thousand Three Hundred
instruction by engineer – in – Charge with necessary hardware fitting, material and labour etc complete. Fifty Nine and Paisa Fourty Six Only
12 Table: Size: (2.40 x 0.90 x 0.76) Providing and fixing 38mm thick (plywood interior grade) post forming laminated top in approved shade with telescopic 1.00 No. 35809.84 Rupees Thirty Five Thousand Eight
suspended metal keyboard with mouse tray with 57mm vertical legs made by plywood with exterior side 1mm and interior side 0.8mm approved laminate. Hundred Nine and Paisa Eighty Four
Appron should be made from plywood with laminated finish as per detail drawing, seperate Drawer unit box (0.65 x 0.41 x 0.43) with wooden bidding patti on Only
nylon castors with lock and telescopic channel of HAFELE should be made from 19mm plywood with 1mm outside and 0.8mm inside laminate as well as 19mm
post forming Outside of shutter with Auto hinges of HAFELE or equivalent and drawer should made from 19mm post forming laminated in approved shade and
CPU Trolley should be supplied of metal powder coated, Footrest (0.91 x 0.30) should be from 19mm plywood with 1mm laminated finish in approved shade. Fix
12mm toughen frosted glass in front of the table and fixing the courian top having size of 4'0" x 2'0" as per given drawing of the table top. Including all materials
and labour etc. complete as per detail drawing and instruction of engineer-in charge (Ref. Dwg No. )
13 Providing and supplying High back leatherette / black mesh fabric chair as per approved brand and model. (Brand and model as per HOF-Model-Marco 1001 / 1.00 No. 21335.00 Rupees Twenty One Thousand Three
Godrej-Model-THRILL HIGH BACK / Wipro-Model-Define / Featherlite-Model-Halix HB / Merrifare-Model-Wau HB or Equivalent) Hundred Thirty Five Only
14 Providing and supplying Medium back chair for Officer's Visitor as per approved brand and model. (Brand and model as per HOF-Model-Sitra-L-Fix / Godrej-Model- 6.00 No. 7670.00 Rupees Seven Thousand Six Hundred
Thrive Fix / Wipro-Model-Carbon / Featherlite-Model-Astro Visitor / Merrifare-Model-Nez (Fix) or Equivalent) Seventy Only
15 Side Table: Size: (1.07 x 0.46 x 0.69) 1.00 No. 15585.17 Rupees Fifteen Thousand Five
Providing and fixing 25mm thick (19mm+6mm) plywood laminated on top and bottom with 6mm thick plywood at backside in approved laminate shade with Hundred Eighty Five and Paisa
exterior side 1mm and interior side 0.8mm approved laminate. Drawer unit box (measurement shown in drawing) with wooden bidding patti, lock,handle and Seventeen Only
telescopic channel should be made from 19mm plywood with 1mm outside and 0.8mm inside laminate.The Rate includes the cost of shutter with Magnet,
Multiple drawer lock, S.S. Legs (75mm height) in bottom, Auto hinges. Including all materials and labour etc. complete as per detail drawing and instruction of
engineer-in charge.The necessary hardware fitting shall be as per approved make list of GSPHCL.
16 Low Ht. Storage (0.46 Depth) 4.00 Smt 9470.04 Rupees Nine Thousand Four Hundred
Providing and fixing low height storage with 25mm thick plywood board.Top and shutter made from 19mm thick plywood in approved shade with vertical and Seventy and Paisa Four Only
horizontal surface 19mm plywood with inside 0.8mm and outside 1mm laminate finish with 6mm thick Plywood & 0.8mm Laminated Finished at Backside. All
teakwood bidding should be finished by melamine polish with support of S.S. legs, lock, handle, etc. complete. Including all materials and labour etc. complete as
per detail drawing and instruction of engineer-in charge.necessary hardware fitting shall be as per aprroved make list of GSPHCL.
Total Rate in Words Total Amount
Total Rate in Words Total Amount
Sr No. Description As Per SOR 2024-25 Unit Rate
17 Two Seater Sofa Providing and supplying the sofa will be total prepared in metal structure. So, 50mm x 50mm sq. metal furniture pipe section created necessity 1.00 No. 17802.66 Rupees Seventeen Thousand Eight
support for 2 seaters sofa. Seat support also been in same metal section. In the metal section, the finished seating must be 0.78mm length x 0.53mm width. 2 Hundred Two and Paisa Sixty Six Only
Seater also created. then Z-Section spring use and on top 4''.0' rubber cushion and top 25mm thick and 32 density U-Foam finished with leather rexin as per
selected sample. At back support also 0.53mm width x 0.74 mm for 2 seater back, fitted with 2''.0' rubber cushion with 25mm U-Foam with 32 density appropriate
3'' angle support, also done finishing along with leather finished. To adding the decorative part 12mm dia. S.S. chrome pipe finish with legs and handle support
also as shown in drawing to create decoration and strengthening support. Including all materials and labour etc. complete as per detail drawing and instruction of
engineer-in charge.
18 Three Seater Sofa Providing and supplying the sofa will be total prepared in metal structure. So, 50mm x 50mm sq. metal furniture pipe section created necessity 1.00 No. 26231.05 Rupees Twenty Six Thousand Two
support for 3 seaters sofa. Seat support also been in same metal section. In the metal section, the finished seating must be 0.78mm length x 0.53mm width. 3 Hundred Thirty One and Paisa Five
Seater also created. then Z-Section spring use and on top 4''.0' rubber cushion and top 25mm thick and 32 density U-Foam finished with leather rexin as per Only
selected sample. At back support also 0.53mm width x 0.74 mm for 3 seater back, fitted with 2''.0' rubber cushion with 25mm U-Foam with 32 density
appropriate 3'' angle support, also done finishing along with leather finished. To adding the decorative part 12mm dia. S.S. chrome pipe finish with legs and
handle support also as shown in drawing to create decoration and strengthening support. Including all materials and labour etc. complete as per detail drawing
and instruction of engineer-in charge.
19 Finishing Walls with Plastic Emulsion Paint on Wall Surfaces (Twocoats) to give an Required shape and even shade after thoroughly brushing the surface to 232.00 Smt 180.25 Rupees One Hundred Eighty and
remove all dirt, and remains of loose powdered materials and finishing smooth etc. complete. Rate are inclussive of Applying Two Coats of Lappy (Putty) and One Paisa Twenty Five Only
Coat of Primer on New Wall Surfaces to give an even shade including throughly brushing the surface free from mortar droppings and other foreign matter and
sand papered smooth. (Fine Putty Shall be of Bison Wall Putty of Berger Paint India Ltd or Trucare Wall Putty of Asian Paint or Dulux Polly Putty of Dulux Paint
Only and Primer shall be of BP White Primer of Berger Paint India Ltd or Asian Paint Trucare Interior Primer of Asian Paint or Interior Sealer A 500 of Dulux Paint
Only and Plastic Emulsion Paint Shall be of Rangoli Total Care of Berger Paint India Ltd or Apcolite Premium Emulsion of Asian Paint or Dulux Interior A 900 of
Dulux Paint Only.) etc. Complete for ALL FLOORS.
20 Single Bed with Matress 1.00 No. 11666.01 Rupees Eleven Thousand Six Hundred
Providing and supplying Single Bed (0.90 X 2.0m) made from teakwood 75x75mm leg support with 50x38mm member as per design with 18mm thick plywood Sixty Six and Paisa One Only
with 1.0mm laminate finish on top and 0.8mm thick laminate finish on bottom area on wooden frame and 18mm thick 150mm wide plywood patta on three side
finished with both side 1.0mm laminate and back side having 330mm wide plywood patta finished with both side 1.0mm laminate and 2mm thick pvc edge
banding of all expose sided and legs & frame to be melamine polish etc. complete. Including supplying 100mm thick matress of U form, density 50Kg/m2 with soft
seat on top of matress etc. complete as per instruction of engineer in charge. (Bed with matress)
21 Centre Tipoi : Size: (0.90 x 0.60 x 0.46m)Providing and fixing 12mm thick designer glass top supported with SS stud with 19mm thick plywood frame (shown in 2.00 No. 6195.03 Rupees Six Thousand One Hundred
detail drawing) with 1mm approved laminate finish with nylon buffers and including all materials and labour etc. complete as per detail drawing and instruction of Ninety Five and Paisa Three Only
engineer-in charge and consultant.
22 Corner Tipoi : Size: (0.675 x 0.675 x 0.46m)Providing and fixing 12mm thick designer glass top supported with SS stud with 19mm thick plywood frame (shown in 2.00 No. 5444.68 Rupees Five Thousand Four Hundred
detail drawing) with 1mm approved laminate finish with nylon buffers and including all materials and labour etc. complete as per detail drawing and instruction of Fourty Four and Paisa Sixty Eight Only
engineer-in charge and consultant.
23 Dismentaling tiled or stone floors laid in mortar including stacking of serviceable material and disposal of unserviceable material with all lead and lift. 55.00 Smt
Rupees Fourty Nine and Paisa Sixty
24 Half brick masonry in common burnt clay building bricks having crushing strength not less than 35 Kg/Sq.cm. in cement mortar 1:4 (1-cement:4-coarse sand) For 3.00 Smt 691.48 Rupees Six Hundred Ninety One and
Second Floor (B) Conventional. Bricks with frog only shall be used. Paisa Fourty Eight Only
25 Providing 15mm thick cement plaster in single coat on brick or concrete wall for interior plastering and finished even and smooth in cement mortar 1:4 (1- 3.00 Smt 272.03 Rupees Two Hundred Seventy Two
cement:4-sand) including finishing with a floating coat of neat cement slurry at Second Floor. and Paisa Three Only
26 P & L 24" x 24" Double Charge Vitrified Tiles 8 to 10 mm thick in Flooring over 20 mm (average) base of cement mortar 1:6 ( 1 cement: 6 coarse sand) on new 30.00 Smt 1580.10 Rupees One Thousand Five Hundred
surface orfixing on existing flooring by adhesive including dismentaling of existing flooring and material jointed with color cement slurry including finised with Eighty and Paisa Ten Only
flush pointing & cleaning the surface etc. complete for Light shade.
Total Rate in Words Total Amount
Total Rate in Words Total Amount
Sr No. Description As Per SOR 2024-25 Unit Rate
27 Table: Size: (1.52 x 0.76 x 0.76) 1.00 No. 16622.62 Rupees Sixteen Thousand Six
Provinding and fixing 19mm thick plywood top table with fixing 25mm thick plywood (19mm + 6mm) patta of 300mm width fixed on bottom periphery .The Hundred Twenty Two and Paisa Sixty
plywood table top is laminated on top and bottom.the front edges of the table top surface is to be covered with 12mm thick teak wood bedding patty with Two Only
melamine polish finish of approved shed.The Rate includes the cost of fixing telescopic suspended metal keyboard with mouse tray. 38mm thick vertical legs
made from plywood with exterior side 1mm and interior side 0.8mm approved laminate. Appron should be made from plywood with laminated finish as per
detail drawing and CPU Trolley should be supplied of metal powder coated. Footrest (0.75 x 0.37) should be from teakwood with melamine polish
complete.Seperate Drawer unit box (0.65 x 0.41 x 0.43) to be made from 19mm plywood with 1mm outside and 0.8mm inside laminate as well as approved
shade for Left or Right sidewith wooden bidding patti on nylon castors with handle,lock and telescopic channel.Rate includes the cost of all materials and labour
etc. complete as per detail drawing and instruction of engineer-in charge.The necessary hardware fitting shall be as per approved make list of GSPHCL.
28 Side Table: Size: (0.91 x 0.46 x 0.69) 1.00 No. 10160.83 Rupees Ten Thousand One Hundred
Providing and fixing 25mm thick (19mm+6mm) plywood laminated on top and bottom with 6mm thick plywood at backside in approved laminate shade with Sixty and Paisa Eighty Three Only
exterior side 1mm and interior side 0.8mm approved laminate. Drawer unit box (measurement shown in drawing) with wooden bidding patti, lock,handle and
telescopic channel should be made from 19mm plywood with 1mm outside and 0.8mm inside laminate. The Rate includes the cost of shutter with Magnet,
Multiple drawer lock, S.S. Legs (75mm height) in bottom, Auto hinges. Including all materials and labour etc. complete as per detail drawing and instruction of
engineer-in charge.The necessary hardware fitting shall be as per approved make list of GSPHCL.
29 Cluster (Work station ) (1.37 x 0.69 x 0.76) 3.00 No. 16610.46 Rupees Sixteen Thousand Six
Providing and fixing Cluster (Workstation) as per drawing, Framing the skeleton with 38mm (19mm+19mm) thick vertical and horizontal plywood patti both side Hundred Ten and Paisa Fourty Six
cover with 6mm for grooving design and finishing with selected laminate. Before installation, make hole/face plate for conduit pipes of electrical/networking Only
cables with openable stud from horizontal partition. Vertical support of 38mm (19mm+19mm) thick double plywood cover with 1mm laminate finish including
teakwood bedding on exposed edges with melamine polish. Fitted 25mm (19mm+6mm) thick (plywood interior grade) post forming laminated top, fixed with
metal clamps including suspended metal keyboard-mouse tray fixed with telescoping channel, cable manager and seperate Drawer unit box (0.65 x 0.41 x 0.43)
should be made from 19mm plywood with 1mm outside and 0.8mm inside laminate as well as approved shade for Left or Right side with Wooden Bedding Patti
on Nylon Castors with Lock and Telescoping Channel of HAFELE with Providing and fixing of softboard (12mm thick) OR glass (5mm thick) as per detail Drawing,
instruction of engineer in charge and Architect.
30 Full Ht. Storage (0.46 Depth) 4.00 Smt 10502.78 Rupees Ten Thousand Five Hundred
Providing and fixing Full height storage with 19mm thick plywood board.Top, Bottom, Sides and shutter made from 19mm thick plywood in approved shade with Two and Paisa Seventy Eight Only
vertical and horizontal surface 19mm plywood with inside 0.8mm and outside 1mm laminate finish with 6mm thick Plywood & 0.8mm Laminated Finished at
Backside. All teakwood bidding should be finished by melamine polish with support of S.S. legs, lock, handle, etc. complete. Including all materials and labour etc.
complete as per detail drawing and instruction of engineer-in charge.necessary hardware fitting shall be as per aprroved make list of GSPHCL.
31 Providing and supplying Medium back chair for Staff as per approved brand and model. (Brand and model as per HOF-Model-Cati / Godrej-Model-Pulse / Wipro- 4.00 No. 7056.72 Rupees Seven Thousand Fifty Six and
Model-That's It / Featherlite-Model-Amaze Project / Merrifare-Model-Nez or Equivalent) Paisa Seventy Two Only
32 Providing and supplying Medium back chair for Staff Visitor as per approved brand and model. (Brand and model as per HOF-Model-Sitra-L-Fix / Godrej-Model- 2.00 No. 4942.08 Rupees Four Thousand Nine Hundred
Oxbo Visitor / Wipro-Model-Carbon / Featherlite-Model-Astro Visitor / Merrifare-Model-Nez (Fix) or Equivalent) Fourty Two and Paisa Eight Only
33 S.S. Sinage Board (Name Plate) 2.00 No. 1271.19 Rupees One Thousand Two Hundred
Providing and Fixing 18"x4.5" S.S. signage board made from Stainless steel (304 Grade) & 0.30mm thick sheet fixed on wall with 12mm thick Laminated Plywood Seventy One and Paisa Nineteen Only
with screw and mirror cap as per Instruction of Engineer In Charge & Architect.
34 Credit value for Door shutter 1.00 No. -400.00 Rupees Four Hundred Only -400.00
35 Credit value for window & Vent 91.00 No. -700.00 Rupees Seven Hundred Only -63700.00
TOTAL CIVIL AMOUNT (A) =
(B-Electric Work)
Total Rate in Words Total Amount
Total Rate in Words Total Amount
Sr No. Description As Per SOR 2024-25 Unit Rate
36A Providing & Erecting Point wiring with 1.1 KV grade ISI marked 2 X 1.5 sq. mm copper PVC insulted FRLS wire with 1.5 sq. mm (green) copper PVC insulated FRLS 19.00 Point 481.00 RS: Four Hundred Eighty One
wire for earth continuity in FIA approved ISI mark medium class white colour 20/25 mm dia. embossed rigid PVC pipe with PVC fitting fixed with adhesive solution only
erected in/on CC Block/Bricks wall / slab along with continuous G.I. fish wire to draw wires and laid in approved manner zari for PVC pipe and boxes shall be filled
with cement mortar and finishing the surface to match the wall / ceiling complete with approved make 5/6 Amp ISI Mark. modular type switch and accessories
mounted in 20 G. G.I. company fabricated metallic box covered with appropriate front plate modules erected flushed with wall / ceiling with necessary modular
lamp holder / modular ceiling rose / HD Connector( make & model approved by EIC and matching colur with switches accessories)as directed for concealed
wiring.Light point. Cat.-III. as directed for concealed wiring Necessary sheet must be erected on all box to prevent mortar going into the box. For ceiling light
Point & Junction box use deep Junction box of same PVC Pipe make .Length of point wiring must not increase than 10 mtr. For that necessary switch boards and
their locations must be finalised before execution by agency otherwise payment will not be done for extra long point. (For future extention, if required, agency
has to erect one higher size metal box and modular plate as per instruction of EIC. Cost of blank plate shall be paid as per tender item) [Wire must be having box
packing] [This item includescleaning (inside/outside) of all GI switch boards,electric point box,fan box,MCBDB & box cutting plaster finishing for modular plate
without any gap] [conductor resistance should be as per IS:8130/1984](A) For Concealed Wiring (a) Light point. Cat.-III
36B For Secondary light point, Cat.-III 10.00 Point 166.00 RS: One Hundred Sixty Six only
36C For Bell Point Cat.-III 2.00 Point 481.00 RS: Four Hundred Eighty One
36D For Fan Point (with 6 A. Modular type switch and two module hum free EME Five step type Electronic fan regulator both having ISI mark) Cat.-III 3.00 Point 668.00 RS: Six Hundred Sixty Eight only
36E For separate Point (with 6 Amp. Switch & 3/5 pin socket both having ISI mark) Cat.-III 4.00 Point 505.00 RS: Five Hundred Five only
36F For Looped on switch board (with 6 Amp. Switch & 3/5 pin socket both having ISI mark) Cat.-III. 9.00 Point 255.00 RS: Two Hundred Fifty Five
37A Providing and erecting Medium Class FIA approved and ISI mark white colour (embossed) RIGID PVC PIPES of following size complete erected with necessary PVC 170.00 Mtr. 33.00 RS: Thirty Three only
fittings & Junction boxes fixed with adhesive solution & clamps on / in wall / ceiling along with continuous fish wire to draw mains with necessary fittings and
junction boxes for following dia. (a) 25 mm dia.
37B 32mm Dia 20.00 Mtr. 54.00 RS: Fifty Four only
38A Providing and laying Mains with FRLS PVC Insulated wire ISI marked 1.1 KV grade with FIA approved ISI mark medium class 20/25/32 mm dia. embossed rigid 50.00 Mtr. 62.00 RS: Sixty Two only
PVC pipe with PVC fitting fixed with adhesive solution to be erected on/in brick wall / slab along with continuous G. I. fish wire to draw mains laid in approved
manner with plastering by cement mortar & finishing the surface to match the wall / ceiling complete with FRLS PVC insulated wire for earth continuity.
(Approved ISI make only) [conductor resistance should be as per IS:8130/1984] [a] 2 x 1.5 sq.mm. FRLS copper multi stranded conductor mains with 1.5 sq.mm.
FRLS copper multi stranded conductor for earthing as per standard colour code. (with 20 mm dia. PVC pipe) (for point wiring and Lighting SB mains)[Wire must be
having box packing]
38B 2 x 2.5 sq.mm. FRLS copper multi stranded conductor mains with 1.5 sq.mm. FRLS copper multi stranded conductor for earthing as per standard colour code. 90.00 Mtr. 82.00 RS: Eighty Two only
(with 20/25 mm dia. PVC pipe) (for power board and computer board mains) [Wire must be having box packing]
38C 2 x 4.0 sq.mm. FRLS copper multi stranded conductor mains with 2.5 sq.mm. FRLS copper multi stranded conductor for earthing as per standard colour code. 10.00 Mtr. 111.00 RS: One Hundred Eleven only
(with 20/25 mm dia. PVC pipe) (for AC point mains) [Wire must be having box packing]
38D 2 x 6.0 sq.mm. FRLS copper multi stranded conductor mains with 2.5 sq.mm. FRLS copper multi stranded conductor for earthing as per standard colour code. 60.00 Mtr. 146.00 RS: One Hundred Forty Six only
(with 20/25 mm dia. PVC pipe) (for Main Panel to 1 Phase MCB DB ) [Wire must be having box packing]
38E 4 x 10.0 sq.mm. FRLS copper multi stranded conductor mains with 4.0 sq.mm. FRLS copper multi stranded conductor for earthing..As per standard colour code. 60.00 Mtr. 421.00 RS: Four Hundred Twenty One
(with 32/40 mm dia. PVC pipe) [Main panel to 3 Phase MCBDB] [Wire must be having box packing] only
39 Providing & fixing 25 mm. dia. PVC insulated G.I. corrugated Flexible pipe with necessary socket, PVC bushes saddle, Check-nuts etc. complete of following sizes. 30.00 Mtr. 37.00 RS: Thirty Seven only
Total Rate in Words Total Amount
Total Rate in Words Total Amount
Sr No. Description As Per SOR 2024-25 Unit Rate
40 Providing and fixing Plug Point wiring with 1.1 KV grade ISI marked approved make 2 x 2.5 sq.mm copper PVC insulated FRLS wire with 1.5 sq.mm (green) copper 7.00 Point 738.00 RS: Seven Hundred Thirty Eight
PVC insulated FRLS wire for earth continuity in FIA approved ISI mark white colour medium class 20/25 mm dia. embossed rigid PVC pipe with PVC fitting fixed only
with adhesive solution erected in/ on wall/slab along with continuous G. I. fish wire to draw wires and laid in approved manner zari for PVC pipe & boxes shall be
filled with cement mortar & finishing the surface to match the wall / ceiling complete with 16 Amp Modular type Swich and accessories mounted in 20 G. GI
company fabricated metallic box covered with appropriate front plate modules erected flushed with wall.[conductor resistance should be as per IS:8130/1984] (a)
16 Amp. Indicator switch & 1 No. 6/16 A universal socket white colour suitable for 3 pin top duly both having ISI mark. (Necessary sheet / tape / polythene /
sand must be erected or filled in all box To Prevent Mortor Going In To The Box) Cat.-III
41 Providing and fixing Plug Point wiring with approved ISI marked 1.1 kv grade 2 x 4.0 sq.mm copper PVC insulated FRLS wire with 2.5 sq.mm (green) copper PVC 3.00 Point 991.00 RS: Nine Hundred Ninty One
insulated FRLS wire for earth continuity in FIA approved ISI mark white colour medium class 20/25 mm dia. embossed rigid PVC pipe with PVC fitting fixed with only
adhesive solution erected in wall / slab along with continuous G.I. fish wire to draw wires and laid in approved manner zari for PVC pipe & boxes shall be filled
with cement mortar & finishing the surface to match the wall / ceiling complete with approved make 16 Amp. Modular type switch and accessories mounted in
20 SWG GI company fabricated metallic box covered with appropriate front plate modules erected flushed with wall / ceiling. [conductor resistance should be as
per IS:8130/1984](a)16Amp modular SP MCB & 1 No. 16 A universal socket white colour suitable for 3 pin top duly both having ISI mark. (Seperate 16 A
Modular SP MCB & 6/16 Amp.Socket must be erected as per requirement of AC Point) (A.C POINT ONLY) (Necessary sheet / tape / polythene / sand must be
erected or filled in all box To Prevent Mortor Going In To The Box) Cat.-III.
42A Providing following type of Modular Type Accessories mounted with 20 G G.I. company fabricated metalic box, single mounting base frame covered with textured 2.00 Each 159.00 RS: One Hundred Fifty Nine
/ metallic front plate, modules erected with necessary connection. As desired by Engineer in charge. TV Co-axial Socket outlet. Cat.-III only
42B Blank Plate Single. Cat.-III 35.00 Each 25.00 RS: Twenty Five only
42C One No. SP 6 Amp Switch .Cat.-III 40.00 Each 150.00 RS: One Hundred Fifty only
42D One No 3/5 pin 6Amp plug Cat.-III 40.00 Each 150.00 RS: One Hundred Fifty only
42E 16 Amp. SP one way indicator switch Cat.-III 8.00 Each 179.00 RS: One Hundred Seventy Nine
42F 6/16Amp. Universal socket Cat.-III 8.00 Each 198.00 RS: One Hundred Ninty Eight
42G RJ-11 Telephone Socket Cat-III 6.00 Each 159.00 RS: One Hundred Fifty Nine
42H Modem Jack for Computer RJ-45. Cat.-III. 6.00 Each 159.00 RS: One Hundred Fifty Nine
43 Providing and Erecting following size of TV Co-axial flexible cable comprising inner conductor of solid bare copper insulated with Foam PE & Secondary conductor 80.00 Mtr. 39.00 RS: Thirty Nine only
made of poly – Aluminium film bonded Al. Braids @ coverage of 65% overall sheated with black PVC insulation. JOINT NOT ALLOWED
(FINOLEX/RRCABLE/POLYCAB/ HAVELLS)a. RG-6
44 SITC of Indoor Commercial Recess / Surface mounted (IP20) 24 w Cool/ Warm white Color LED Down lighter office Lighting Luminaire with separate driver with 17.00 Each 751.00 RS: Seven Hundred Fifty One
single piece pressure die cast aluminium alloy housing with corrosion resistant powder coated finish with PMMA /PS /Injection mouldede Polycarbonate diffuser only
with high brightness LED complete (only from Philips Lumileds, CREE, Nichia, Bridgelux, Seoul & Osram CRI with 24w, the led's should be mounted on back lit
metal core PCB for better heat conduction and long life of LED. The Fixture should comply all International Standarad third party (LM 79 for complete fixture,
LM80 for individual LED). The Fixture have protection like miswiring, over voltage, over load, wrong wiring, THD <15%,, P.F >0.95,efficacy >90lm/w & driver
efficiency >85%,, 24 w fixture wide voltage range from 160V to 270V, 50/60 HZ, @ 240V application, 2 KV surge protection.The fixture should be provided with
external separate Potted driver, latest Valid BIS approved Luminaire and driver . The Fixture efficacy >90 lumens/watt only for safety and performance. (L70 @
50,000 Hrs.) The fixture should be able to easily mount on POP / Grid false ceiling. The Luminiare should be tested as per IP 20 and following test reports should
be submitted at the time of approval, heat resistant test, thermal test, Ingress protection test, drop test, Photobiological report [Note:-The manufacturer /
authorised Channel partner of the manufacturer has to submit 5 yr free replcement Guarantee for complete Fixture]
(Model approved by Engineer in Charge subject to above Specification.)[Approval will be given strictly subject to item specification]
Total Rate in Words Total Amount
Total Rate in Words Total Amount
Sr No. Description As Per SOR 2024-25 Unit Rate
45 SITC of Indoor Commercial Recess/ Surface/ Hanginging mounted ( IP20 ) 36W Cool/ Warm White Color LED office Lighting Luminaire(2'X2')(4'X1') with 2.00 Each 1777.00 RS: One Thousand Seven Hundred
separate driver & Frame for installation in Gypsum ceiling with single piece pressure die cast aluminium alloy housing/ Extruded aluminium housing with Seventy Seven only
corrosion resistant powder coated finish with PMMA/PS/Injection Moulded diffuser with high brightness LED complete ( only from Philips Lumileds, CREE
Nichia , Osram, bridgelux, Seoul, CRI >80 with 36w Consumption , efficacy> =90lumens/watt the led's should be mounted Metal core PCB for better heat
conduction and long life of LED .The Fixture should comply all International Standarad third party ( LM 79 for complete fixture ,LM80 for individual LED ) . The
Fixture have protection like miswiring over voltage , over load , wrong wiring , THD <15% ,, P.F >0.95, efficacy >90lm/w, 36w fixture wide voltage range from
160V to 270V, 50/60 HZ , @ 240V application,. 2 KV surge protection The fixture should be provided with external separate Potted driver, BIS approved
Luminaire and driver only for safety and performance . ( L70 @50,000 Hrs, with minimum fixture and driver efficiency > =85% .The Fixture should be able to
easily mount 600mmX600mm Grid False cieling. The Luminiare should be tested as per IP20 standards and following test reports should be submitted at the time
of approva,l heat resistant test , thermal test , Ingress protection test , drop test, photobiological report [Note:-The manufacturer / authorised Channel partner of
the manufacturer has to submit 5 yr free replcement Guarantee for complete Fixture]
(Model approved by Engineer in Charge subject to above Specification.)[Approval will be given strictly subject to item specification]
46 Supply Installation testing commissioning of LED FLEXI STRIP complete with required nos. Driver with IP20 Protection Class 7.2W /Meter with options of Color 10.00 Mtr. 218.00 RS: Two Hundred Eighteen
temperature 3000 to 4000 deg K and which can be easily cut into various sections as per requirement with end termination box as required. The manufacturer/ only
authorised Channel partner of the manufacturer has to submit for 4yr free replcement unconditional Guarantee for complete Fixture
47 Providing, erecting, testing ceiling Fan confirming to IS: 374/1979 AMDT No. 1 to 6 Class-I, 50 Hz. Specification of Ceiling Fan must be as per below. (1) Sweep: 3.00 Each 1929.00 RS: One Thousand Nine Hundred
1200 mm, (2) Operating Voltage: 180 to 230 V, (3) Power Factor: > 0.9, (4) Power Consumption: maximum 53W, (5) RPM: minimum 350, (6) Service Value : min Twenty Nine only
4.3 mtr3/min (7) Class of insulation: 'B', (8) No. of heavy duty premium quality Ball bearing: Two, (9) Total Body: Top & Bottom should be alluminium, (10) Blade:
Aluminium approx 1.1 mm thick, (11) Colour: White high grade powder coating, (12) Canopy: Two Nos. Heavy duty, (13) Condenser: Aluminium body premium
quality Branded make,(14) Down road: up to 1.0 mtr as per site tequirment, (15) Required fixing accessories etc. (16) 3 core 1.0 sq.mm wire as per site
requirment,(17) no vibration and noise due to mechanical parts. (18) Necessary safety wire shoud be erected with fan for safety & Check with EIC (19) BEE Star
Rated (OEM has to approved model as per tender specification and tested at ERDA) ( necessary test reports should be submitted at the time of approval.strictly
sample approved by EIC subject to above specification only)
48 Providing & erecting Wrought Iron Fan Hook erected with necessary cementation & Plastering or double bolted type Anchor fastener fan hook with 2 Nos. 3.00 Each 43.00 RS: Forty Three only
anchnor fastner.
49 Supplying & erecting 19/20 mm. nominal bore "B" class G.I. pipe / M.S. pipe down rod erected duly painted for fan complete with necessary 24/0.2 flat 3 core 3.00 Rn. 107.00 RS: One Hundred Seven only
flexible Core with earthing. The down rod thickness, hole, locking arrangement, construction, powder coating, colour shed should be same as original down rod Mtr.
brought with ceiling fan. For that agency has to give original down rod sample to fabricator and one sample down rod should be approved with EIC. After approval
given by EIC agency can use the down rod as per approved sample. If without approval down rod will be erect on site, agency has to replace them with own
cost.(Execute if fall ceiling occurs)
50 SITC of Decorative call bell Stereo type 250 Volt complete erected on existing polished wooden block or in M.S. box with 3mm thick white ISI mark laminated 2.00 Each 170.00 RS: One Hundred Seventy only
sheet. {Anchor(Chime model), Rider, Vision)}
Total Rate in Words Total Amount
Total Rate in Words Total Amount
Sr No. Description As Per SOR 2024-25 Unit Rate
51 Providing ad erecting approved make 8 Way Three phase Double Door Horizontal / Vertical type (as per site requirement and EIC instruction) outgoing per phase 1.00 Each 3379.00 RS: Three Thousand Three Hundred
outgoing type (PPI) metal clad D.B. as per relevant Indian standards amended up to date.Supplying and fixing following way Three phase MCB distribution board Seventy Nine only
with company wire links for internal connections having colour code and with suitable lugs and company fabricated with sheet box with powder coated inside
and outside after apply seven tank chemical process of 1.2mm thick CRCA sheet (Door, Back side & body of MCBDB) cover complete with suitable integral single
piece construction, tinned copper busbar and link with all necessary interconnection and with necessary size GI frame (if required for surface type) for mounting
MCBDB. Manufacturer must be provided (1) IP 43 and as per IS:8623 1 & 3, IEC 61439 1 & 3 having D type PU gasket. (2) Seven tank Powder coating Certificate
(3) Tinned Copper/Brass make neutral & Earthing link with isolation & Protecting Cover for 440 Volts on surface / recess complete with loose wire box, terminal
connectors for all incoming and outgoing circuits, with suitable size FRLS PVC 10mm2 insulated copper conductor with Pin type lug up to terminal blocks and
internal connection, tinned copper bus bar, 4 nos. tinned copper neutral link, 4 nos. tinned copper earth bar, din bar 4 nos., detachable gland plate,
interconnections, including earthing etc. Three phase incoming and single phase outgoing.Total quantity of wire link: 13 Nos.
For Three phase 8Way Double Door PPI MCBDB (The DBs should be used of same company of MCB / ELCB to be used) (MCBDB must be erected in line & level with
spirit level and finish the external edge with box cutting plaster) (Same colour MCB(SP/DP) should be used as same as MCBDB) [Including Necessary numbering /
marking on box done with red colour radium sticker as per site requirement and instructions given by EIC on site. Font / number size given by EIC on site as per
52 Providing ad erecting approved make single phase Double Door metal clad D.B. as per relevant indian standards ammended upto date. 1.00 Each 5536.00 RS: Five Thousand Five Hundred
Supplying and fixing following way single phase MCB distrubution board of company fabricated with sheet box with powder coated inside and outside after apply Thirty Six only
seven tank chemical process of 1.2mm thick CRCA sheet cover (Door, Back side & body of MCBDB) complete with suitable integral single piece construction
tinned copper busbar and link with all necessary interconnection and with necessary size MS frame for mounting MCBDB.Manufacturer must be provided (1) IP
and as per IS:8623 1 & 3, IEC 61439 1 & 3 having D type PU gasket. (2) Seven tank Powder coating Certificate (3) Tinned Copper/Brass make neutral & Earthing
link with isolation & Protecting Cover for 240 Volts on surface / recess complete with loose wire box, terminal connectors for all incoming and outgoing circuits,
with suitable size FRLS PVC insulated copper conductor up to terminal blocks and internal connection, tinned coppper bus bar, 1 no. tinned copper neutral link,
tinned copper earth bar, din bar, detachable gland plate, interconnections, powder painted including earthing etc.
Single phase incoming and horizontal single phase outgoing.
For 16 Way MCBDB: Including 40 Amp. 30 mA double pole ELCB (ELCB confirming to IS:12640/1988 having sensitivity of 30 mA and breaking capacity of 10 KA),
MCB 40 Amp. double pole switch (C curve confirms to IS:8828 having breaking capacity of 10 KA) and S.P. MCB of rating 6 to 32 Amp. with NL suitable to operate
on 240 Volt A.C. power. (6 Amp: 6 Nos., 16 Amp: 6 Nos.) (The DBs should be used of same company of MCB / ELCB to be used) (MCBDB must be erected in line
& level with spirit level and finish the external edge with box cutting plaster) (Same colour MCB(SP/DP) should be used as same as MCBDB) [Including Necessary
numbering / marking on box done with red colour radium sticker as per site requirement and instructions given by EIC on site. Font / number size given by EIC on
site as per requirement]
53 Providing & erecting 415 V MCB Four Pole for Motor & Inductive Load (C Curve) having 10KA breaking capacity & confirms to IS:8828 in existing box having 1.00 Each 730.00 RS: Seven Hundred Thirty only
following capacity. For 63 Amp.
54 Providing & erecting 415 V MCB Four Pole for Motor & Inductive Load (C Curve) having 10KA breaking capacity & confirms to IS:8828 in existing box having 2.00 Each 662.00 RS: Six Hundred Sixty Two only
following capacity. For 40 Amp.
55 Providing & erecting 240 V MCB double pole switch for motor & inductive load (C Curve) having 10 KA breaking capacity & confirms to IS:8828 in existing box 12.00 Each 327.00 RS: Three Hundred Twenty Seven
having following capacity. For 40 Amp. only
56 Providing and Erecting of Miniature circuit breaker single pole 6 Amp. to 25 Amp. suitable to operate on 240 V A.C. system and having breaking capacity 10 KA to 10.00 Each 111.00 RS: One Hundred Eleven only
be erected in existing box. confirming to IS 8828/1996 with ISI Mark.
57 Supply & Fixing of company fabricated Sheets steel powder coated enclosure Size 4''X6'' for incorporating Two nos. MCB.(MCBDB must be erected in line level & 4.00 Each 272.00 RS: Two Hundred Seventy Two
level with spirit level and finish the external edge with box cutting plaster)( Same color MCB(SP/DP) should be used as same as MCBDB)( Incl. necessary numbiring only
/marking on box done with RED colour radium sticker as per site requirement & instruction given by EIC on site. Font/ Number size given by EIC on site as per
requirement)(The enclosure should be used of same company of MCB/ ELCB to be used)
58 Supply & Fixing of company fabricated Sheets steel powder coated enclosure minimum Size 8''X6' for incorporating Four nos. MCB.(The enclosure should be 2.00 Each 442.00 RS: Four Hundred Forty Two
used of same company of MCB/ ELCB to be used) (MCBDB must be erected in line level & level with spirit level and finish the external edge with box cutting only
plaster)( Same color MCB(SP/DP) should be used as same as MCBDB)( Incl. necessary numbiring /marking on box done with RED colour radium sticker as per site
requirement & instruction given by EIC on site. Font/ Number size given by EIC on site as per requirement)
Total Rate in Words Total Amount
Total Rate in Words Total Amount
Sr No. Description As Per SOR 2024-25 Unit Rate
59 Mains with ISI marked, 1.1KV grade electrolyte multi stranded, annealed copper conductor with heat resistant PVC insulated conforms to IS 694, IEC - 227 erected 50.00 Mtr. 56.00 RS: Fifty Six only
in existing pipe of following size (Specifically for control panel, relays, power switchgears, motor starters & control wiring) with required size of copper lugs, S/S
nuts and bolts if required. One wire 6.00 sq.mm.
60 Providing, erecting, fabricating the M.S. structure as per requirement of site as per structure design Including proper size approved by EIC of M.S. angles, flats, 25.00 Kg. 77.00 RS: Seventy Seven only
bars, square pipe, channels, sections (Tata,Zindal,Asian,Jsi Make) complete with cutting, welding, grinding and finishing duly painted with Asian/Nerolac make
premium quality oil paint and true care red oxide metal primer,asian paint make with erection on site as per direction of engineer in charge with necessary
grouting cementing, plastering and finishing complete. All hole opening of square pipe end must be closed with M.S plate welding. Payment will be done on KG as
per Actual weight.
61A Supplying and laying UPVC cable trunking system comprising unplasticised polyvinyl, chloride rigid material with ignition free & flame proof confirming BS .All 5.00 Mtr. 275.00 RS: Two Hundred Seventy Five
necessary accessories and measuring of following sizes. [1] 75 mm x 50 mm trunking (Honeywell / LEGRAND/ Presicion Make Only) only
61B 100 mm x 50 mm trunking (Honeywell / LEGRAND/ Presicion Make Only) 5.00 Mtr. 424.00 RS: Four Hundred Twenty Four
62 Supply, Installation testing and commissioning of 16 Gauge M.S. Powder coated floor raceway Access outlet / service junction box with 16 Gauge M.S. Powder 6.00 Each 750.00 RS: Seven Hundred Fifty only
coated Cover plate with duct entry 25 mm / 38 mm size having epoxy powder coated trap lead with corrosion & rust free with adjustable levelling screw of
following size. [a] 300 mm x 300 mm x 50 mm depth.
63 Supply & Installation of 2.0 mm thick SS 304 for Existing Floor Junction box Cover Plate as per Site requirement & required Size with required size SS bolt, Srew 1.00 Sq. Mtr 8797.00 RS: Eight Thousand Seven Hundred
& champhear edge Ninty Seven only
64 SITC of specified make X color for Cat.-6 Data and Y color for Cat.-6 voice cable to be done in prelaid PVC pipe / raceway, but without the cost of raceway or pipe 350.00 Mtr 47.00 RS: Forty Seven only
(the wire is to be drawn from MFD/ JB to outlet point) (a) CAT - 6 (For Computer Cabling and For Voice Cabling) (Molex / D-link / Legranad make Only)
65 SITC of 24 x 10/100/1000BASE-T ports 1.00 Each 15247.00 RS: Fifteen Thousand Two Hundred
4 x Gigabit RJ45/SFP Combo ports Forty Seven only
Advanced L2 switching and security features
L2+ Static Routing
Optional “standard mode” or “surveillance mode” management user interface as per attached specification ( Cisco , D-link , HP make & model approved by EIC)
66 SITC of Cat 6 Jack Panel, fully loaded with 24 nos. UTP ports for PCB based IO Jacks (RJ45, TIA-568C Category-6, Installation and Termination of all 24 nos. 1.00 Each 4357.00 RS: Four Thousand Three Hundred
Catergory-6 UTP , unloaded with individually replaceable 24 nos. Category-6 I/O Jacks complying with TIA-568.C.2, as per given jack specification Shall be suitable Fifty Seven only
for loading unshielded & shielded jacks for different category systems (CAT 6) (Molex / D-link / Legranad make Only)
67 Supply and installation of 12 U Equipment steel rack Wall mounting for installing , lan switch, Patch panel, etc, rack should be fully enclosed steel housing 1.00 Each 11441.00 RS: Eleven Thousand Four Hundred
fabricating with 14 SWG Sheet and powder coated with glass doors and having wire nos. wire management system . the rate includes the exhaust fan 2 nos, 6 Forty One only
Sockets and 1 switch power strip and all the wiring in the rack.& as per attached details specification. 600mm(W)X600mm (D) ( Make:- APW president/ APC/
Valrack/Rittal/Netrack )
68 SITC of company fabricated 1.0 mtr Patch cords shall conform to Cat- 6 & conductor shall be stranded for better flexibility Shall support network line speeds up to 5.00 Each 155.00 RS: One Hundred Fifty Five only
1 Gbps Shall have RJ-45 jacks. (Molex / D-link / Legranad make Only)
69 SITC of company fabricated 2.0 Mtr. Patch cords shall conform to Cat- 6 & conductor shall be stranded for better flexibility Shall support network line speeds up 5.00 Each 199.00 RS: One Hundred Ninty Nine
to 1 Gbps Shall have RJ-45 jacks. (Molex / D-link / Legranad make Only) only
70 Providing and erecting Red/ Black colour fire alarm XLPE (IS : 7098) (I)-88 ISI marked & FRLS outer sheath, steel wire armoured cable multistrand Copper 80.00 Mtr. 142.00 RS: One Hundred Forty Two
conductor for 600/1000V. to be laid on wall/ Ceiling with suitable G.I.1.0 mm thick heavy guage cable clamp (A) 2C X 1.5 Sq mm Shielded Armoured only
71 Supplying, installation, testing & commissioning of intelligent analog addressable photothermal detector having IS-11360-1985 or BS 5446 Part I-1977 & Part VII 2.00 Nos 2415.00 RS: Two Thousand Four Hundred
–1985 (VdS approved) or NFPA72 (UL approved) with Latest ammendment complete with mounting base & Plate complete as required.( Make:- Edwards, Fifteen only
Notifier, Siemens , Schneider, GST )
72 Supplying, installation, testing & commissioning of response indicator on surface/recessed MS Box having two LED, metallic cover complete with all connections 2.00 Nos 228.00 RS: Two Hundred Twenty Eight
etc as required. ( Make:- Edwards, Notifier, Siemens , Schneider, GST ) only
Total Rate in Words Total Amount
Total Rate in Words Total Amount
Sr No. Description As Per SOR 2024-25 Unit Rate
73 Providing and erecting Inverter based approved make split air-conditioning unit consisting of copper condensing unit with variable speed fan motor, inverter type 2.00 Each 51155.00 RS: Fifty One Thousand One
hermetically sealed rotary compressor with accessories etc. duly connected separately erected evaporating unit and blower motor with its accessories by means Hundred Fifty Five only
of extra supplied proper insulated copper tubing,drain PVC pipes suitable for ( cost includes Eco Friendly green gas charging and 15A plug top & Remote Control
& MS Stand) with necessary core cutting.(1)For 3 Star Rating of current year [a]for 1.7 to 2 ton capacity-[ Model Approved by EIC ]
74 Supply, Installation, Testing & Commissioning of Sequential controller for equal run time operation. The same should be able to run 1 units at a time out of 2 1.00 Nos. 6991.00 RS: Six Thousand Nine Hundred
units. Controller will be time and temperature based. Ninty One only
75 Providing and erecting Air condationer copper tubing with minimum 19mm thick class O nitrile rubber insulation for entire piping system. For Single phase/ 20.00 Rmt 956.00 RS: Nine Hundred Fifty Six only
Three Phase Split A.C. Machine/ Cassate A.C Machine insulated pair of soft, copper tubing including power and control cable, 20/25/32 mm Dia. Rigid (ISI
marked) UPVC drain pipe. Duly Insulated with 6 mm elastomeric nitrite rubber up for Split AC machine up to 4 TR capacity
76 Carry out RCC Core cutting- up to 100 mm dia./200mm thick Wall/beam/slab with providing PVC pipe of 3 mm thick inside and necessary finishing on both ends of 4.00 Each 1188.00 RS: One Thousand One Hundred
wall .( For Electrical Work) Eighty Eight only
77 Shifting of Split A.C. The Scope includes dismantling, shifting, re-installing & re-commissioning of the units including topping up of Refrigerant gas, minor civil 2.00 Each 1950.00 RS: One Thousand Nine Hundred
work wiring existing piping M S Stand electrical cabling with PVC drown piping for 1.00, 1.5 & 2.0 TR capacity. Fifty only
TOTAL ELECTRIC AMOUNT (B) =
TOTAL AMOUNT (A) + (B) =
TOTAL AMOUNT (A) + (B) =
Asst. Engineer Dy.Exe. Engineer Exe. Engineer
Gandhinagar Gandhinagar Gandhinagar
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
RAW_HTML
General Specification Booklet New 2021 P.No. 1 to 131.pdf
General Specification Booklet New 2021 P.No. 132 to 262.pdf
All Condition Policebhavan.pdf
Attached Specification.pdf
ELE3 specifications Booklet.pdf
Electrical MOU Condition Specification and Make list.pdf
FINAL APPROVED MAKE LIST 28.10.2025.pdf
Laminate Code.pdf
SBD Vol.1 Policebhavan.pdf
SBD Vol.2 Policebhavan.pdf
SBD Vol.3 Policebhavan.pdf
SBD Vol.4 Policebhavan.pdf
Schedule-B.pdf
Standard Specification.pdf
Approved Bank Details upto March -2027.pdf
Performance Bond and Bitumen date Amendment WhatsApp Copy.pdf
NIT-02 of 2026-27.pdf
Download all tender documents and submit your bid