8329 DAY TO DAY MAINTENANCE OF PLUMBING ITEMS, INTERNAL WATER SUPPLY FOR TECHNICAL AND RESIDENTIAL AREA UNDER AGE (I) RnD NSTL, VISAKHAPATNAM.

Amount

M&L for attending to petty repair job to plumbing/ internal water supply works such as repair to leaking bib taps/ pillar taps/ mixers/ stop cocks/ angle valves/ float valves/ concealed stop cock etc. by tightening and providing washer, disc, spindle or any other minor accessories, repair to float valves, flushing cistern by minor adjustments, leaking water supply lines by tightening the GI fittings or refixing water supply or sanitary fixtures using thread/ Teflon tapes with and including small GI fittings such as GI elbow, socket, union as required at site to make the system functional complete as specified and directed by Engineer In Charge. [Note : (i) Each repair job shall be measured as one job. (ii) Job involving replacement of taps/ valves shall not be measured under this item].

S&F in repairs PVC valve less, syphonic action type, flushing cistern, 10 litres capacity, low level, white, with inlet, ball valve, float and handle, brackets complete including PVC connection and outlet pipe all as directed. [Make: 'Slim line' of M/s Parry ware/ 'Champion' of M/s Hindustan Sanitary ware/ 'Sleek+' of M/s Hindware]

S&F in repair vitreous china white flat back wash hand basin 550 x 440mm size including 15mm dia PVC connection 600mm long, brass CP waste coupling, 32mm dia PVC waste pipe, CI/MS brackets including cutting for and pinning in brackets or fixed with brass screws all as directed.

S&F in repairs vitreous china ware wash down water closet pan (pedestal pattern) white including PVC seat cover with mild steel chromium plated or aluminized hinging device, fixing bolts jointing to flushing cistern and flush pipe anti syphonage pipe etc complete all as specified and directed

S&F in repairs vitreous china urinals half stall type complete including providing and fixing plugs, bedding urinal against wall in CM 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in white cement all as specified.

Taking up or down galvanized steel tubing 15mm bore with fittings.

Taking up or down galvanized steel tubing 20mm bore with fittings.

Taking up or down galvanized steel tubing 25mm bore with fittings.

Taking up or down galvanized steel tubing 40 or 50 mm bore with fittings.

S&F GI tubes 15mm bore dia medium grade galvanized, with all fittings and fixed complete to walls and ceilings or laid in floors complete all as specified and as directed.

S&F GI tubes 20mm bore dia medium grade galvanized, with all fittings and fixed complete to walls and ceilings or laid in floors complete all as specified and as directed.

S&F GI tubes 25mm bore dia medium grade galvanized, with all fittings and fixed complete to walls and ceilings or laid in floors complete all as specified and as directed.

S&F GI tubes 50 mm bore dia medium grade galvanized, with all fittings and fixed complete to walls and ceilings or laid in floors complete all as specified and as directed.

S&F 20mm outer dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ ceiling or laid in floors complete all as specified..

Refixing of steel tubing 15mm and connecting in new or old position wall ceiling floors etc.

Refixing of steel tubing 20mm and connecting in new or old position wall ceiling floors etc.

Refixing of steel tubing 25 or 32 mm and connecting in new or old position wall ceiling floors etc.

Refixing of steel tubing 40 or 50 mm and connecting in new or old position wall ceiling floors etc.

S&F 15mm Bib tap standard of PTMT any colour high pressure screwed for iron pipe and fixed in repairs all as specified. (Minimum weight 90gms)

S&F 15mm Pillar taps of PTMT any colour high pressure screwed for iron pipe and fixed in repairs all as specified. (Minimum weight 110gms)

S&F 15mm angle Stop valve of PTMT any colour high pressure screwed for iron pipe and fixed in repairs all as specified. (Minimum weight 90gms)

S&F 15mm Stop valve of PTMT with long shank and cup (concealed type) any colour high pressure screwed for iron pipe and fixed in repairs all as specified. (Minimum weight 110gms)

S&F in repairs Solid Plastic water closet seat, black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminized hinging device complete all as specified.

S&F in repairs 15mm bore gun metal globe or gate valve with iron wheel heads Class-II, screwed both ends for iron pipe all as specified.

S&F in repairs 20mm bore gun metal globe or gate valve with iron wheel heads Class-II, screwed both ends for iron pipe all as specified.

S&F in repairs 25mm bore gun metal globe or gate valve with iron wheel heads Class-II, screwed both ends for iron pipe all as specified.

S&F in repairs 50mm bore gun metal globe or gate valve with iron wheel heads Class-II, screwed both ends for iron pipe all as specified.

S&F in repairs Waste coupling of PTMT (half or full threaded) 32mm bore dia [Minimum weight: 45gms] all as specified.

S&F in repairs PVC connection 15mm size 600mm long with PTMT nuts.

S&F in repairs brass chromium plated shower rose 125mm dia with swivel joint suitable for fixing to 15mm bore tube all as specified and as directed.

S&F in repairs brass chromium plated Towel rail 'D' type, 600mm long complete with wall brackets all as specified and directed.

S&F rotational moulded polyethylene water storage tanks, double layered of capacity 500 ltrs (cylindrical vertical with closed top) hoisted and fixed in position complete including necessary GI tank nipples, taking down existing unserviceable tank all as specified and as directed by Engineer-in-charge.

S&F rotational moulded polyethylene water storage tanks, double layered of capacity 1000 ltrs (cylindrical vertical with closed top) hoisted and fixed in position complete including necessary GI tank nipples, taking down existing unserviceable tank all as specified and as directed by Engineer-in-charge.

S&F rotational moulded polyethylene water storage tanks, double layered of capacity 2000 ltrs (cylindrical vertical with closed top) hoisted and fixed in position complete including necessary GI tank nipples, taking down existing unserviceable tank all as specified and as directed by Engineer-in-charge.

S&F in repairs stainless steel cockroach trap grating 125 mm dia with /without hole for drain pipe complete all as directed.

S&F in repairs 20mm bore dia PTMT Nipple suitable for HDPE water tank (Minimum weight 45gms) all as directed.

S&F in repairs 25mm bore dia PTMT Nipple suitable for HDPE water tank (Minimum weight 65gms) all as directed.

S&F in repairs sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm all as specified. (Make: Nirali, Diamond, Usha, Neelkanth, Pheonix Amco).

Supply and replace siphon set suitable for existing PVC flush tank complete all as specified and as directed.

S&F PVC flexible waste pipe, 32mm bore, 900mm long suitable for wash hand basin/ sink complete with adapter.

S&F in repairs 15mm dia Pillar taps, cast copper alloy, with long neck, chromium plated fancy type with aerator, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and as directed.[Cat No. CON-021KN of make: Jaquar or equivalent in Marc/ Plumber]

S&F in repairs 15mm dia angle valve cast copper alloy fancy type chromium plated with crutch handle and wall flange complete all as specified and as directed. [Cat No. CON-059KN of make: Jaquar or equivalent in Marc/ Plumber]

S&F in repairs 15mm dia stop valve concealed type cast copper alloy fancy type chromium plated with crutch handle and adjustable wall flange including dismantling portion in the wall as required including making good to match with existing complete all as specified and as directed.[Cat No. CON-083KN of make: Jaquar or equivalent in Marc/ Plumber]

S&F in repairs Bib taps, 15mm bore, cast copper alloy, chromium plated with crutch handle, short body with wall flange, screwed down, screwed for iron pipe or for brass ferrule all as specified and as directed. [Cat No. CON-047KN of make: Jaquar or equivalent in Marc/ Plumber]

S&F in repairs Bib taps, 15mm bore, cast copper alloy, chromium plated with crutch handle, long body with wall flange, screwed down, screwed for iron pipe or for brass ferrule all as specified and as directed. [Cat No. CON-107KN of make: Jaquar or equivalent in Marc/ Plumber]

S&F in repairs cast copper alloy, chromium plated 2 way bib cock 15mm dia with crutch handle with wall flange complete all as directed. [Cat No. CON-041KN of make: Jaquar or equivalent in Marc/ Plumber]

S&F in repairs hand shower (Health Faucet) (ABS Body) with 1 meter long easy flex tube in chrome finish & wall hook complete all as directed. [Cat No. ALD-CHR-585 of make: Jaquar or equivalent in Marc/ Plumber]

S&F in repair brass chromium plated Soap dish complete all as directed. [Cat No. AQN-7731 of make: Jaquar or equivalent in Marc/ Plumber]

S&F closing lid for PVC water storage tank of capacity exc. 250 Ltr but n.exc. 500 Ltr complete with hinges for securing to tank including taking down old unserviceable lid all as directed.

S&F closing lid for PVC water storage tank of capacity exc. 500 Ltr but n.exc. 2000 Ltr complete with hinges for securing to tank including taking down old unserviceable lid all as directed.

S&F PVC mirror cabinet of size 350x450mm with hinged door covered with mirror, with brush holder, pouch holder, shelves etc. complete all as directed. [Cat No. 551 of make PRAYAG or equivalent in Commander]

S&F in repairs brass spindle for bib tap/ stop valve/ angle vale of any size complete all as directed.

S&F in repairs 15mm dia GI fittings (Nipples, elbows, reducers, Tee, sockets, and tank nipples etc) complete all as specified and as directed by Engineer-in-Charge.

S&F in repairs 20mm dia GI fittings (Nipples, elbows, reducers, Tee, sockets, and tank nipples etc) complete all as specified and as directed by Engineer-in-Charge.

S&F in repairs 20mm dia GI fittings (Nipples, elbows, reducers, Tee, sockets, and tank nipples etc) complete all as specified and as directed by Engineer-in-Charge.

S&F in repairs stainless steel kitchen plate rack of size 31"x36"x10", made of 1mm thick stainless steel sheet complete all as directed. [Make: Prayag/ Nirali/ Jayna/ Neelkant]

S&F in repairs Ball valves 15mm bore dia, high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed [Minimum weight: 142gms] all as specified.

S&F in repairs Ball valves 20mm bore dia, high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed [Minimum weight: 210gms] all as specified.

S&F in repairs Ball valves 25mm bore dia, high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed [Minimum weight: 455gms] all as specified.

S&F in repairs Ball valves 40mm bore dia, high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed [Minimum weight: 690gms] all as specified.

B SRINIVAS

Sai Srija Constructions

ANJALI CONSTRUCTIONS

LAKSHMI SAI CONSTRUCTIONS

ROHITH INFRA

M/S Jayalakshmi Constructions