Loading
Loading…
Loading…
| Sl No | Description | Qty | Unit | Ajith T M L2 | Rajan M L1 |
|---|---|---|---|---|---|
| 1.00maintenaince work | |||||
| 1.00 | 50.9.1.1:Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately), using good quality Anjili wood /jack wood | 0.07 | cum | 1,11,243.59 ₹7,898.29 Lowest | 1,11,243.59 ₹7,898.29 Lowest |
| 1.00 | 50.9.5.1:Providing and fixing glazed shutters for doors, windows and clerestory windows using 4 mm thick float glass panes including ISI marked M.S pressed butt hinges bright finished of required size with necessary screws. Using Anjili wood/ jack wood 35 mm thick shutters. | 2.41 | sqm | 4,067.45 ₹9,790.35 Lowest | 4,067.45 ₹9,790.35 Lowest |
| 1.00 | OD221809/2025-2026:Providing and fixing Alu Zinc profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.40 mm (+0.05%), total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x55mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. | 41.8 | sqm | 538.49 ₹22,508.88 Lowest | 538.49 ₹22,508.88 Lowest |
| 1.00 | 10.29.1:Providing & fixing fly proof wire gauze to windows, clerestory windows & doors with M.S. Flat 15x3 mm and nuts & bolts complete.Galvanised M.S. Wire gauze with 0.63 mm dia wire and 1.4 mm aperture on both sides | 8.64 | sqm | 857 ₹7,404.48 Lowest | 857 ₹7,404.48 Lowest |
| 1.00 | 50.9.15.5:Providing and fixing iron hooks and eyes: 100 mm | 8 | no | 14.64 ₹117.12 Lowest | 14.64 ₹117.12 Lowest |
| 1.01 | 50.14.1.1:Removing and refixing door shutters after necessary repairs for easy opening and closing etc complete as per the direction of site Engineer-in-charge. | 2 | each | 2,437.87 ₹4,875.74 | 437.87 ₹875.74 Lowest |
| 1.01 | 9.53:Providing 40x5 mm flat iron hold fast 40 cm long including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs and embeddings in cement concrete block 30x10x15 cm 1:3:6 mix ( 1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) | 4 | each | 227.5 ₹910 Lowest | 227.5 ₹910 Lowest |
| 1.01 | 13.62.1:Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade:Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture . | 7.55 | sqm | 224.02 ₹1,691.8 Lowest | 224.02 ₹1,691.8 Lowest |
Tender Value
₹51,197
EMD Value
₹1,280
Closing Date
9 Sept 2025, 2:00 pmClosed
ASSISTANT ENGINEER
ASSISTANT ENGINEER, LID AND EW SECTION, KUNNOTHPARAMBA G P
Kunnothparamba G.P - Parad veterinary dispensary maintenance - Proj. 294/2025-26
2025_LSGD_792286_5
AE/LSGD/KNP/ETEN-03/25-26
Open Tender
Civil Works - Buildings
Item Rate
180 days
KUNNOTHPARAMBA G P
Please refer Tender documents.
7 documents required · 7 mandatory
₹555
Yes
₹1,280
Yes
25 Sept 2025
29 Aug 2025
9 Sept 2025
29 Aug 2025
9 Sept 2025
29 Aug 2025
Amount
maintenaince work
50.9.1.1:Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately), using good quality Anjili wood /jack wood
50.9.5.1:Providing and fixing glazed shutters for doors, windows and clerestory windows using 4 mm thick float glass panes including ISI marked M.S pressed butt hinges bright finished of required size with necessary screws. Using Anjili wood/ jack wood 35 mm thick shutters.
OD221809/2025-2026:Providing and fixing Alu Zinc profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.40 mm (+0.05%), total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x55mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.
10.29.1:Providing & fixing fly proof wire gauze to windows, clerestory windows & doors with M.S. Flat 15x3 mm and nuts & bolts complete.Galvanised M.S. Wire gauze with 0.63 mm dia wire and 1.4 mm aperture on both sides
50.9.15.5:Providing and fixing iron hooks and eyes: 100 mm
50.14.1.1:Removing and refixing door shutters after necessary repairs for easy opening and closing etc complete as per the direction of site Engineer-in-charge.
9.53:Providing 40x5 mm flat iron hold fast 40 cm long including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs and embeddings in cement concrete block 30x10x15 cm 1:3:6 mix ( 1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size)
13.62.1:Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade:Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture .
Ajith T M (BID ID -2329726)
Bidder Name
Ajith T M
Rajan M
stage.html
html • 0.04 MB
tech_eval.pdf
fin_eval.pdf
aoc.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .