Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹2.9 CrAdmitted-Finance | ₹2.9 Cr | L1 | Admitted-Finance |
| 2 | L2₹4.1 Cr+₹1.2 Cr (42.5%)Admitted-Finance BELLO II PO PS KIMIN PAPUMPARE ARUNACHAL PRADESH PIN 791121 | PAPUM PARE | ARUNACHAL PRADESH | 791121 | ₹4.1 Cr+₹1.2 Cr (42.5%) | L2 | Admitted-Finance |
| 3 | Rejected-Technical | - | - | Rejected-Technical Disqualified due to non submission of requisite documents as per NIT condition |
| Sl No | Description | Qty | Unit | AKIN ENTERPRISE L2 | JALAL UDDIN BARBHUIYHA L1 |
|---|---|---|---|---|---|
| 1.00 | Preparation and consolidation of sub grade with power road roller of 8 to 12 tonne capacity after excavating/cutting all kind of soil/existing road (including taking out soiling & metalling etc.) not exceeding 35 cm in depth dressing to camber and consilidating with road roller including making good the undulation etc. with available serviceable material/surplus earth etc. As direction of Engineer in charge (basic rate based on DSR-2016). | 1,162.34 | sqm | 490 ₹5,69,546.6 | 160 ₹1,85,974.4 Lowest |
| 2.00 | Laying, spreading and compacting stone aggregate of specified sizes to WBM specifications in uniform thickness, hand picking, rolling with 3 wheeled road / vibratory roller 8-10 tonne capacity in stages to proper grade and camber, applying and brooming requisite type of screening / binding material to fill up interstices of coarse aggregate, watering and compacting to the required density. | 116.13 | cum | 6,800.8 ₹7,89,776.9 | 770 ₹89,420.1 Lowest |
| 3.00 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:4:8 (1 Cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size | 816.36 | cum | 4,800 ₹39,18,528 Lowest | 5,800 ₹47,34,888 |
| 4.00 | Providing and laying design mix cement concrete of M-30 grade, in roads/ taxi tracks/ runways, using cement content as per design mix, using coarse sand and graded stone aggregate of 40 mm nominal size in appropriate proportions as per approved & specified design criteria, providing dowel bars with sleeve/ tie bars wherever required, laying at site, spreading and compacting mechanically by using needle and surface vibrators, levelling to required slope/ camber, finishing with required texture, including steel form work with sturdy M.S. channel sections, curing, making provision for contraction/ expansion, construction & longitudinal joints ( 10 mm wide x 50 mm deep) by groove cutting machine, providing and filling joints with approved joint filler and sealants, complete all as per direction of Engineer-in-charge (Item of joint fillers, sealants, dowel bars with sleeve/ tie bars to be paid separately).Note:- Cement content considered in M-30 is @ 340 kg/cum. Excess/ less cement used as per design mix is payable/ recoverable separately.Cement concrete manufactured in automatic batching plant (RMC plant) i/c transportation to site in transit mixer | 2,022 | cum | 15,800.8 ₹3,19,49,217.6 | 9,500 ₹1,92,09,000 Lowest |
| 5.00 | Providing and fixing in position pre-moulded joint filler in expansion joints | 97,571 | per cm depth per cm width per metre | 2 ₹1,95,142 Lowest | 3.2 ₹3,12,227.2 |
| 6.00 | Providing and laying in position bitumen hot sealing compound for expension joints etc. using grade 'A' sealing comound. | 24,393 | per cm depth per cm width per metre | 2.6 ₹63,421.8 Lowest | 3.4 ₹82,936.2 |
| 7.00 | Extra for providing and mixing hardening compound of approved quality as per manufacture's specification in cement concrete. | 2,022 | litre | 22 ₹44,484 Lowest | 52 ₹1,05,144 |
| 8.00 | Brick work with common burnt clay FPS bricks of class designation 7.5 in foundation and plinth in: Cement mortar 1:4 (1 cement : 4 coarse sand) | 80 | cum | 1,180 ₹94,400 Lowest | 6,400 ₹5,12,000 |
| 9.00 | Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level : 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) | 38 | cum | 1,080 ₹41,040 Lowest | 7,200 ₹2,73,600 |
| 10.00 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:2:4 (1 Cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) | 13 | cum | 2,800.6 ₹36,407.8 Lowest | 6,800 ₹88,400 |
Tender Value
Refer Docs
EMD Value
₹4.2 L
Closing Date
10 Dec 2020, 12:00 pmClosed
AGM(CE)
FCI RO ASSAM
CONSTRUCTION OF CEMENT CONCRETE ROAD AT fSD RAMNAGAR IN ASSAM REGION BALANCE WORK
2020_FCI_598325_1
13/2020-21
Open Tender
Civil Works - Roads
Works
90 days
RAMNAGAR
AS PER TENDER DOCUMENTS
2 documents required · 2 mandatory
₹1,770
FCI RO ASSAM GUWAHATI
₹4.2 L
GUWAHATI
17 Mar 2021
20 Nov 2020
11 Dec 2020
20 Nov 2020
10 Dec 2020
20 Nov 2020
25 Nov 2020
Amount
Preparation and consolidation of sub grade with power road roller of 8 to 12 tonne capacity after excavating/cutting all kind of soil/existing road (including taking out soiling & metalling etc.) not exceeding 35 cm in depth dressing to camber and consilidating with road roller including making good the undulation etc. with available serviceable material/surplus earth etc. As direction of Engineer in charge (basic rate based on DSR-2016).
Laying, spreading and compacting stone aggregate of specified sizes to WBM specifications in uniform thickness, hand picking, rolling with 3 wheeled road / vibratory roller 8-10 tonne capacity in stages to proper grade and camber, applying and brooming requisite type of screening / binding material to fill up interstices of coarse aggregate, watering and compacting to the required density.
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:4:8 (1 Cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size
Providing and laying design mix cement concrete of M-30 grade, in roads/ taxi tracks/ runways, using cement content as per design mix, using coarse sand and graded stone aggregate of 40 mm nominal size in appropriate proportions as per approved & specified design criteria, providing dowel bars with sleeve/ tie bars wherever required, laying at site, spreading and compacting mechanically by using needle and surface vibrators, levelling to required slope/ camber, finishing with required texture, including steel form work with sturdy M.S. channel sections, curing, making provision for contraction/ expansion, construction & longitudinal joints ( 10 mm wide x 50 mm deep) by groove cutting machine, providing and filling joints with approved joint filler and sealants, complete all as per direction of Engineer-in-charge (Item of joint fillers, sealants, dowel bars with sleeve/ tie bars to be paid separately).Note:- Cement content considered in M-30 is @ 340 kg/cum. Excess/ less cement used as per design mix is payable/ recoverable separately.Cement concrete manufactured in automatic batching plant (RMC plant) i/c transportation to site in transit mixer
Providing and fixing in position pre-moulded joint filler in expansion joints
Providing and laying in position bitumen hot sealing compound for expension joints etc. using grade 'A' sealing comound.
Extra for providing and mixing hardening compound of approved quality as per manufacture's specification in cement concrete.
Brick work with common burnt clay FPS bricks of class designation 7.5 in foundation and plinth in: Cement mortar 1:4 (1 cement : 4 coarse sand)
Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level : 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:2:4 (1 Cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)
Centering and shuttering including strutting, propping etc. and removal of form for : Foundations, footings, bases of columns, etc. for mass
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. Cold twisted bars
12 mm cement plaster finished with a floating coat of neat cement of mix : 1:4 (1 cement: 4 fine sand)
AKIN ENTERPRISE
stage.html
html • 0.03 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .