Renovation of canteen at MGVCL Coporate Office Campus, Race Course, Vadodara

Name of work :- Renovation of canteen at MGVCL Coporate Office Campus, Race Course, Vadodara.

Item Description Qty Rate 1 % L.C Rate with UNIT Amount

MGVCL reserves the right for hand over of any buy back items wiithout assigning any reason Not

1 therof. Acutal quanitity may very as per requirment and site conditions. The item inludes cost of removing, applicable

dismentalling, transporating etc. complete at all lead and lift.

1.1 Main counter table -1.00 4000.00 0.00 4000.00 Each -₹

1.2 Side counter table -1.00 3000.00 0.00 3000.00 Cu.m -₹

1.3 Dineing table -14.00 1000.00 0.00 1000.00 Each -₹

1.4 Dineing sitting -25.00 800.00 0.00 800.00 Each -₹

1.5 Dining chairs -6.00 250.00 0.00 250.00 Each -₹

1.6 Serving Table -2.00 500.00 0.00 500.00 Sqm -₹

Dismentaling tiled of stone floors laid in mortar including stacking of serviceable materilas 310.00 48.43 0.48 48.91 Sqm ₹

and disposal of unserviceable materials with all lead and lift.

3 Demolition and disposal of unserviceable materials with all lead and lift.(i) Lime concrete 20.00 537.59 5.38 542.97 Cu.m ₹

Dismantling aluminium/ Gypsum partitions, ACP clading, doors, windows, fixed glazing and false ceiling

including disposal of unserviceable material and stacking of serviceable material with in 50 meters lead as

directed by Engineer-in-charge. Work complete including all type of

tools, tackles, scaffolding etc complete as per instruction of EIC.

Filling, with good quality Cinder (steam coal), as and where directed by the EIC, in sunk and

other required area in layers of required thickness, including watering, ramming, consolidating well etc.

5 complete, as directed. work complete including all type of tools, tackles, scaffolding, safety measures, 20.00 1495.00 14.95 1509.95 Cu.m ₹

loading, unloading, transportation, at all floors, all heights, all levels etc complete as per instruction of

Providing and laying cement concrete work 1:2:4 (1- Cement : 2- Coarse sand : 4- graded stone

aggregates 20 mm nominal size) and curing complete excluding cost of formwork and reinforcement for

reinforced concrete work in (A) Foundations, footings, Base or columns and Mass concrete

Dismentling C.I. pipes G.S.W.pipes abd A.C. rain water pipes with fittings and clamps including 15.00 75.88 0.76 76.64 Rmt ₹

stacking the materials with all lead and lift ( for any dia, of pipe)

Dismantling santtary fittings like wash basin . W.C. pan Indian and European type, flushing 4.00 411.67 4.12 415.79 Each ₹

tank etc. including stacking the materials with all lead and lift

Dismentaling of sheet roofing including ridges, Hips, Valleys, Gutters etc. stacking of 75.00 48.43 0.48 48.91 Sqm ₹

serviceable materilas and disposal of unserviceable materials with all lead and lift.(i)

10 Dismentling steel work including distempering and stacking the materials with all lead and lift. 500.00 3.72 0.04 3.76 Kg ₹

Demolition of Brick work and stone masonry including stacking of serviceable materilas and 5.00 558.57 5.59 564.16 Cu.m ₹

disposal of unserviceable materials with all lead and lift.(ii) In Cement Mortar.

Brick work using common burnt clay building bricks having crushing strength not less than 35 5.00 4391.01 43.91 4434.92 Cu.m ₹

kg./Sq.Cm. in Superstructure in Cement Mortar 1:5. (1- Cement : 5 -fine sand)(B) Conventional

Providing 15mm thick cement plaster in single coat on Rough (Similar)side of single or half 15.00 190.50 1.91 192.41 Sqm ₹

13 brick walls for interior plastering upto floor two level and finished even and smooth in (i) Cement

mortar 1:3 (1-cement:3-sand)

20mm thick sand faced cement plaster on walls upto height 10 metres above ground level 15.00 334.18 3.34 337.52 Sqm ₹

14 consisting of 12mm thick backing coat of C.M. 1:3 (1-cement : 3-sand) and 8mm thick finishing coat of C.M. 1:1 (1-

cement : 1-sand) etc. complete.

Kota Flooring Providing and laying polished natural stone (Machine cut) of an approved and size for

paving /flooring in plain and/or diamond /approved pattern including cement mortar bedding of 25 mm thick in

15 1:4 proportion, cement float, machine 25 to 30 mm thk. Kota stone of size 0.60 m x 0.60 m cutting, 310.00 1198.81 11.99 1210.80 Sqm ₹

dressing, leveling, jointing, filling the joints, curing,

finishing, etc complete as directed by Engineer In Charge.

Providing and laying coloured glazed tiles of the size 300 mm x 200 mm x 8 mm / 300 mm x 100.00 1462.62 14.63 1477.25 Sqm ₹

16 450 mm x 8 mm in skirting, risers of steps and dedo on 10 mm. thick cement plaster 1:3 (1 cement : 3 coarse

sand) & jointed with white cement slurry.

Applying spacer of 6 mm and not less than 6 mm depth of epoxy grooving of lavicrete , Roff 950.00 66.37 0.66 67.03 Rmt ₹

17 equivalents directed by Engineer in charge. incl. cost of fixing materials, labour, tools, plants, equipotent incl. all

lead & lift comp.

Providing and fixing eco-friendly light weight calcium silicate false ceiling tiles having Tegular

edge & 15 mm Thick Densified edges on the Tile Periphery for Extra Strength The Light weight

calcium silicate ceiling tiles shall have , light reflection 85% non-combustible as per

B.S. 476 part IV, 100% humidity resistance and also having thermal conductivity0.043° w/m KC.for the best

thermal Insulation . The Light weight calcium Silicate tile shall be of approved texture Fine fissured/

Spintone/Cosmos having NRC value of 0.5 & Globe having NRC value of 0.75 NRC or equivalent of size

X 595 mm to be laid on true horizontal level suspended inter locking metal grid of hot dipped galvanized steel

sections (galvanizing @120 grams per sqm including both side) consisting of main ‘T’ runner suitably spaced at

joints to get required length and size of 24X38mm made from 0.30 mm thick (minimum) sheet, 1200mm centre

to centre, and cross ‘T’ of size 24X28mm made out of 0.33mm (Minimum) sheet spaced 1200mm along spaced

18 between main ‘T’ at 600mm centre to centre to form agrid of 1200X600mm and secondary cross ’T’ of 125.00 1657.57 16.58 1674.15 Sqm ₹

length 600mm and size 24x28mm made of 0.30 mm thick (Minimum) sheet to be interlocked at middle of the

1200X600mm panel to form grid of size 600X600mm resting on periphery walls/partitions on a perimeter

wall angle pre-coated steel of size (24X24X3000mm made of 0.40mm thick (minimum) sheet with the help of

rawl plugs at 450mm centre to centre with 25mm long dry wall screws @ 230mm interval and laying

15mm thick Densified edges light weight calcium silicate ceiling tiles of approved texture (Fine

Fissured/Cosmos/Spintone) in the grid including, cutting /making opening for services like diffusers,

grills, light fittings, fixtures, smoke detectors etc., wherever required, Main ‘T’ runners to be

suspended from ceiling using G.I. slotted cleats of size 25X35X1.6mm fixed to ceiling with 12.5mm dia

and 50mm long dash fasteners, 4mm G.I. adjustable rods with galvanized steel level clips of size

85X30X0.8mm, spaced at 1200mm centre to centre long main ‘T’ bottom exposed with 24mm of all T-

Providing and fixing table top washbasin suitable for pillar tap including fixing on granite with

adhesive chemical, waste coupling Half / Full threaded and waste coupling up to 130mm compatible with

table top basin including, o ring, rubber plug, nut, nipple, Angle valve 15 mm heavy duty with cap - flange,

including fitting & fixing in socket in position with required accessories, making the hole in granite,

including plubming, transportation, tools tackles, fitting work and fitxures for the same etc complete. Wash 9361.00 9454.61 Each ₹

Basin : Kerovit KADIN - KS277 or Kohler / Jaquar / reputed make having base price more than ₹5,900.00 and

Waste coupling code Kerovit KA870005/06 or Kohler / Jaquar / reputed make having base price more than

₹775.00, angle valve code kerovite KA 910001 or Kohler / Jaquar / reputed make having base

price more than ₹775.00

Providing and fixing Bottle trap including, o ring, rubber plug, fitting & fixing in position with required

accessories, , including plumbing, transportation, tools tackles, fitting work and fitxures for the same

etc complete. Bottle Trap : Kerovit KA870002 or Kohler / Jaquar /

reputed make having base price more than ₹1875.00

Providing and fixing Sensor tap including connection with batteries, AC/DC connection, making

the core in granite,Long braided Hose suitable for tall basin, o ring, rubber plug, fitting & fixing in position

21 with required accessories, , including plumbing, transportation, tools tackles, fitting work and fitxures for 4.00 21222.00 212.22 21434.22 Each ₹

the same etc complete. Sensor Tap : Kerovit KBST002 or Kohler / Jaquar / reputed make having base

price more than ₹17,950.00

Providing and fixing Soap Dispenser including fitting & fixing in position with required accessories, ,

including transportation, tools tackles, fitting work and fitxures for the same etc complete. Catagory :

Kerovit KA990015 or Kohler / Jaquar / reputed make having base

price more than ₹4,200.00

Providing and fixing Dolphy or its equivalent make Automatic Hand Dryer of 1800 watt, temperature

of Wind 60 ± 20 celsius including fitting & fixing in position with required accessories, , including

transportation, tools tackles, fitting work and fitxures for the same

Providing and laying gang saw cut 18mm thick, mirror polished pre moulded and pre polished

machine cut granite stone of required size and shape of approved shade, colour and texture in flooring, Door,

window sill jambs, Table top and side portion for washbasin and similar locations laid over 20mm thick

24 cement mortar / fixing the same in wall including fixing the same in wall / fixing on wall with base of 5.00 3890.00 38.90 3928.90 Sqm ₹

areldite or its equivalent bonding agent and groving from base and fixing with suitable fixture including

grouting the joints with matching pigment, epoxy touch ups etc complete as per direction of Engineer in

Providing and fixing Plantex or its equivalent make Mirror with Light (18 X 24 inch) , Made

From a 5mm HD environment-friendly copper-free silver mirror with a classic design, have three

different light (White Light, Natural Light, Warm Light) modes of 3000k/4500k/6000k,

P54 rated water-proof ensures safe when the LED bathroom mirror lighting is in wet bathroom

environments, including fitting & fixing in position with required accessories, , including transportation, tools

tackles, fitting work and fitxures for the same

Providing and fixing concealed center point to wall ceiling & floor CPVC (SDR 13.5) PIPE having 10.00 168.67 1.69 170.36 Rmt ₹

26 National Sanitation Foundation (NSF) seal for potable water of following dia. nominal bore tube fittings

and clamps including making good the wall, ceiling and floor etc. complete.[A]

Providing and fixing concealed center pont to wall ceiling & floor CPVC (SDR 13.5) PIPE having 10.00 251.31 2.51 253.82 Rmt ₹

27 National Sanitation Foundation (NSF) seal for potable water of following dia. nominal bore tube fittings

and clamps including making good the wall, ceiling and floor etc. complete.[A]

Providing and fixing concealed center pont to wall ceiling & floor CPVC (SDR 13.5) PIPE having National 10.00 443.29 4.43 447.72 Rmt ₹

28 Sanitation Foundation (NSF) seal for potable water of following dia. nominal bore

tube fittings and clamps including making good the wall, ceiling and floor etc. complete.[A]

Providing, laying and jointing in true line and level 110 diametre U.P.V.C (Type B) conforming to

IS 13592-1992 with one end plain and other end socketed with rubber ring, & fittings conforming to

ISI 14735-1999 of approved make for drainage system pipe line, pipe shall be jointed with each other with

29 rubber lubricant, pipe shall be fixed on wall using of PVC clamp of the size 110 mm diametre x 149 mm length x 10.00 847.55 8.48 856.03 Rmt ₹

145 mm heigh at every 2000 mm center to center or shall be concealed in walls as directed including necessary

fittings such as bends, shoes etc. including testing of pipes and joints and jointed with adhesive solvent cement

Providing, laying and jointing in true line and level 160 diametre U.P.V.C (Type B) conforming to

IS 13592-1992 with one end plain and other end socketed with rubber ring, & fittings conforming to

ISI 14735-1999 of approved make for drainage system pipe line, pipe shall be jointed with each other with

30 rubber lubricant, pipe shall be fixed on wall using of PVC clamp of the size 160 mm diametre x 210 mm length x 10.00 826.12 8.26 834.38 Rmt ₹

196 mm heigh at every 2000 mm center to center or shall be concealed in walls as directed including necessary

fittings such as bends, shoes etc. including testing of pipes and joints and jointed with adhesive solvent cement

Providing and fixing to wall ceiling and floor 10.0 Kg. F/Cm2 working pressure polythene pipes 10.00 277.46 2.77 280.23 Rmt ₹

31 of the following outside Dia. Low densidy, complete with special falnge compression type fittings, wall

clipsetc. including making good the wall ceiling and floor.(F) 75mm

Providing and fixing PVC SWR Nahni trap IS 14735 for drain - 75 mm diameter with jali of the following 4.00 566.65 5.67 572.32 Each ₹

32 nominal diameter of self cleansing design with C.I scread down or hinged grating

including the cost of cutting and making good the walls.

Applying two coats of putty & two coats of primer of approved brand and manufacture on new wall surface to 100.00 40.19 0.40 40.59 Sqm ₹

33 give an even shade including thoroughly brushing the surface free from

mortar dropping and other foreign matter and sand papered smooth.

Providing & laying of three coats with Royale luxury Emulsion paint (soft sheen, with teflon

paint) of Asian Paint or equivalent approved brand in shades and colour as directed on wall surfaces to

give an even shade incl. scaffolding to at any height with all labour and material after thoroughly brushing the

surface & making free from mortar dropings and other foreign matter including surface preparation

etc.complete. Including cost of all type of tools, tackles, all labour, materials, transportation, cleaning , at all

floor, all level, all depth, all Height, all lead and lift , performance waranty certificate etc. work complete

as per the detailed drawing, approved sample, specifications and instruction of EIC.

Providing and fixing Structural glass glazing system approved make having aluminium minimum

main frame size of vertical of 100mm X 55mm x 2mm thick and aluminium horizontal minimum size of 75mm x

65 x 2mm made out of specially designed extruded aluminium sections to withstand wind pressure as

per BIS code and fabricated, fixed at all levels, elevation and heights to the Masonry / RC walls / RC

supporting elements with necessary clamps, brackets and anchor fasteners. All clamps and brackets shall be

Mild Steel Hot dip galvanized minimum 80 microns thick and shall conform to IS: 4759-1996. The extruded

aluminium section shall be powder coated in approved colour with a anodic

35 coating of minimum 15 microns. Extruded section shall be of 6063 T5 or T6 alloy conforming to ASTM B 221. 225.00 3373.32 33.73 3407.05 Sqm ₹

Any other fastening straps, nuts, bolts, rivets, washers, etc. shall be in stainless steel SS 304 grade. All

tapes shall be of Norton make or equiv. The glass hsall be 6 mm thick toughened reflective soft coated

Advantage Blue / green coated glass having Light Transmission (VLT) Not more than 35 to 40 %, Reflectance

10 to 20% outside, Direct Solar Energy Transmittance - 35%, Solar Heat Gain Coefficient - 0.45 Shading

,U - Factor 3 W/m2 deg K, Sound Insulation - 31db outer lite)Contractor shall prepare detailed shop

drawings, fabrication drawings based on elevation / architectural drawings, with all details and submit for

obtaining necessary approval prior to commencement of work and

Providing and fixing rolling shutters of approved make made of 80 mm wide M.S. laths inter-

locked together through their entire length and jointed together at the ends by end locks mounted on

36 specially designed pipe shaft with bracket plates, guide channels and arrangements for inside and 10.00 2768.90 27.69 2796.59 Sqm ₹

outside locking with push-pull operation complete but excluding the cost of hood cover and spring. (A) Shutters

having width below 3.5.M.

38 Prepainted Galvalume sheet roofing shed: providing, welding, installation & fixing the PPGL 100.00 1657.00 16.57 1673.57 Sqm ₹

Supplying from vertical

fixing 3'' dia. Round

of redaymade pipe garden

vertical column single

3 nos.upoftopots

plantation, plantation material etc. as per requirment & selection by the authority. The cost includes necessary

cost of MS structure if required.

Providing & fixing 35mm thick factory made laminated veneer lumber door shutter confirming

to IS 14616 and TADS 15:2001 (Part B), fixing with butt hinges of required size with necessary

40 screws all complete as per directions of EIC & panelling with panels: 12mm thick plain grade-1 medium 2.00 9854.00 98.54 9952.54 Sqm ₹

density flat pressed three layer particle board FPT-1 or graded wood particle board FPT-1, IS:3087 marked,

bonded with BWP type synthetic resin adhesive as per IS 848 including 3 coat melamine polish, frame polish,

fixing decorative handles, profile door closer etc comple as directed by EIC.

Maintenance of existing aluminum windows (to be removed & refixed) with new ribbons, clear white gaskets,

rollers, handles etc complete with applying silicon from outside to restrict the seepage of rain water.

Aluminum sections shall be powder coating of approved shade and

colour after sanding surface as per instruction.

Designing, Supplying, Eracting, Testing and Commessoning of water fall fountain as per

referance photo. The cost inlcude purcahse and placing of black granite with necessary adhesive,

SR,etc. to the wall. The cost includes necessary mortar system and water manegment system of the

fountain including water nosal, drain, etc.The cost includes All type of civil work for below and above structure

( Excavation , foundation , RCC , TMT , etc with all finishig item) of required height , width & as per structural

stability requirement.

42 Work complete including all type of material, fittings , fixtures,Finish, loading , unloading , transporation, , 1.00 80000.00 800.00 80800.00 Each ₹

all leads ,accessories, all floor , all levels, all heights , etc complete as per drawings ,specifications &

instruction of EIC.

The Details of the Theme, Design, Drawing, Subject of Art , Sculpture , etc whatever in the scope of the

project has to be proposed by the Bidders in the form of Shop Drawing , Rendered Image etc in Soft

Copy as Well as Colour Printed Format , Prototype model for the

approval of EIC. And the same shall be executed strictly as per final selection and decision of

Dining table: 2100x750x750 mm

Providing & fixing table 25 mm thick top comprising from Pre-laminate / Post laminate finish with IS 710 ply

and vertical support comprising of MS section with powder coating. necessary side posts form and other PVC

Work complete including all necessary fittings, mock up sample, loading, unloading, transportation,

placing at all floors and for all leads, all accessories as described in item

description. Work complete as per the detailed drawing, specification and instruction of

Dining table: 750x750x750 mm

Providing & fixing table 25 mm thick top comprising from Pre-laminate / Post laminate finish with IS 710 ply

and vertical support comprising of MS section with powder coating. necessary side posts form and other PVC

Work complete including all necessary fittings, mock up sample, loading, unloading, transportation,

placing at all floors and for all leads, all accessories as described in item

description. Work complete as per the detailed drawing, specification and instruction of

Supplying and placing Chair of nilkamal model novella 07 or equivalent or any other brand or make chair as per

site situation and as per selection by Engineer in Charge.

45 Chair with PP(Polypropylene) moulded shell & Frame in 19mm dia, 16 Guage of Stainless Steel . Work complete 112.00 2121.75 21.22 2142.97 Each ₹

including all necessary hardware and fittings , mock up sample, loading, unloading, transportation, placing

at all floors and for all leads, all accessories as directed by

Engineer in Charge.

Cash Counter table: 1650 X 1500 X

Providing and fixing L shaped cash counter table with Pre-laminate/ post laminate finis with IS 710 Ply

inlcuding necessary front and side packing with drawers and top display panel for food items as per detailed

drawing and as directed by EIC.

Top: Top shall be made of 25 mm thk. ply with approved laminate on top and 1 mm thk. white laminate on bottom

46 with round edge wooden patti including malamine polish with wax buffing on the exposed parts. 1.00 17016.19 170.16 17186.35 Each ₹

Drawers: Drawers shall be made of 19 mm thk. ply with approved laminiate on exposed parts and 1 mm thk.

whitte laminiate on bottom including malamine polish with wax buffing on exposed parts,

Display Panel: Display Panel shall be made 5 mm thick float glass and shall be placed on top with necessary SS

304 supports as required.

Work complete including all necessary channels, hinges, stopper, locks or any other hardware

and fittings , loading, unloading, transportation, placing at all floors and for all leads, all

Supply, Installation, testing & commissioning of Kitchen equipment. work complete Including all type of materials, fittings, accessories ,tools, tackles, all labour,

transportation, loading, unloading, cleaning, surface preparation, placing at all floor, all level, all depth, all Height, all lead and lift etc. work complete as per the drawing, approved sample, specifications

and instruction of EIC. Sample mock shall be approved from EIC. The contractor shall obtain approval from the EIC for the manufacturer of Kitchen Equipment before placing the order. stainless steel is

specified it shall be what is known to the trade as Austenitic 18-B type 304, 2B finish, with content from 17% to 19% chrome, 7 % to 9% nickle and a maximum carbon content of 0.11. ( S.S.304 Matt Finish)

Work table with bottom shelfs : 1150 x 600 x

• WORK TOP: SS 304 16 SWG

• BOTTOM SHELF: SS 20 SWG

• UNDERFRAME FOR TOP: MS ANGLE 35 X 35 X 5MM THICK DULY PAINTED WITH SUPPORT

47 • UNDERFRAME FOR BOTTOM SHELF: 30 X 30 X 3MM THICK DULY PAINTED 4.00 17250.00 172.50 17422.50 Each ₹

• UPRIGHTS: 30 X 30 X 16 SWG PIPE WITH HEAVY DUTY ADJUSTABLE NYLON BULLETS FITTED

• ALL THE WELDED CORNERS AND JOINTS MUST BE SMOOTHED

2 burner cooking range : 1200 x 600 x

• UNDERFRAME: MS 35 X 35 X 5MM DULY PAINTED

• COVERING: SS AISI 304 GRADE 20 SWG

• UPRIGHTS: 30 X 30 X 16SWG SS AISI 304 GRADE

48 • TOP: 16SWG SS AISI 304 GRADE 1.00 30733.50 307.34 31040.84 Each ₹

• BURNER JALI: CASTING HEAVY DUTY AND FINISHED

• BURNER: G10 OR G11

• GAS FITTINGS: PILOT, COPPER PIGTAIL, NEEDLE VALVE HEAVY DUTY CROSS SUPPORT:

30 X 30 X 16SWG PIPE

Single burner cooking range : 600 x 600 x

• UNDERFRAME: MS 35 X 35 X 5MM DULY PAINTED

• COVERING: SS AISI 304 GRADE 20 SWG

• UPRIGHTS: 30 X 30 X 16SWG SS AISI 304 GRADE

49 • TOP: 16SWG SS AISI 304 GRADE 1.00 15525.00 155.25 15680.25 Each ₹

• BURNER JALI: CASTING HEAVY DUTY AND FINISHED

• BURNER: G10 OR G11

• GAS FITTINGS: PILOT, COPPER PIGTAIL, NEEDLE VALVE HEAVY DUTY CROSS SUPPORT: 30 X 30 X

Soiled dish disposal table : size: 1200 x 600 x

• TOP: SS AISI 304 GRADE SUNKIN TYPE BENDED.

• SUNKIN TYPE BENDING WITH 3 SIDED CROSS SUPPORTS.

50 • SUNKIN BENDED TOP WITH GARBAGE CHUTE. 1.00 23575.00 235.75 23810.75 Each ₹

• UPRIGHTS: 30 X 30 X 16SWG SS AISI 304 GRADE.

• CROSS SUPPORT: 30 X 30 X 16 SWG SS AISI 304 GRADE.

• ALL THE WELDED CORNERS AND JOINTS MUST BE SMOOTHED. MS FRAME STRUCTURE

3 sink unit : size: 1800 x 600 x

• TOP: SS AISI 304 GRADE OF 16SWG SUNKIN TYPE BENDING

• SINK SIZE: 450 X 350 X 250 OF 16SWG WITH CUPLING.

• UNDERFRAME: 35 X 35 X 5MM THICK MS ANGLE DULY PAINTED

• UPRIGHTS: 30 X 30 X 16 SWG WITH ADJUSTABLE NYLON BULLET HEAVY DUTY

• BOTTOM SHELF: SS AISI 304 GRADE 20SWG WITH MS ANGLE FRAME 30 X 30 X 3MM

• ALL THE WELDED CORNERS AND JOINTS MUST BE SMOOTHED

• SINK MUST BE WELDED AND SMOOTHEN PROPERLY AT WELDS CROSS SUPPORT: 35 X

X 5MM racks (M.S painted) : Size: 1150 x 550 x 1650 Uprights: 38 OD MS pipe 16swg powder coated.

Shelfs: 20swg MS bended shelf powder coated welded with uprights with stiffeners.

All uprights with adjustable nylon bullets.

5 +1 hot G.N Bain marie : 2300 X 730 + 300 X850

• THREE SIDE FULL COVERING 20SWG SS 304 GRADE 1MM THICKNESS AND TOP SS 16 SWG WITH

20SWG WATER TANK

• UNDERFRAME: 35 X 35 X 5MM MS ANGLE DULY PAINTED

• BOTTOM SHELF 1MM SS 304 GRADE THICKNESS WITH MS 35 X 35 X 3MM ANGLE SUPPORT

• FRONT SIDE COVERING UPTO PANNEL AND WATER TANK

• ELECTRICAL LOAD: 3KW/IPHASE

• GN PAN: 1/1 X 150 DEPTH WITH SS LIDS

• TRAY SLIDE BRACKETS: 3NOS SS 304 GRADE 16 SWG MATERIAL WITH SS 304 GRADE PIPE 25DIA X

16 SWG RAILING AND SPILLAGE TRAY SS 304 GRADE 1MM THICK

SS exhaust hood with filter and damper with installation at site. Size: 1200 x 750 x 600 1.00 40250.00 402.50 40652.50 Each ₹

54 For 2burner range and single burner range

SS 304 grade hood 20swg with filter and damper valve

55 G.I ducting with all fittings and installation 200.00 166.75 1.67 168.42 Sqf ₹

1100 RPM / 10000 CFM RATE | BLOWER WILL BE INSTALLED ON THE OUTSIDE SURFACE AREA

EXHAUST BLOWER 7.5 HP

BLOWER HEAVY DUTY FULLY MS DULY ANTI CORROSIVE PAINTED WITH MOTER FITTED.

Any item of SOR year 2024-25 of ROADS & BUILDINGS DEPARTMENT VADODARA CITY 500000.00 1.00 0.01 1.01 Rs. ₹

57 DIVISION (GOG)/Approved PO/Approved rate analysis as per description of items with approved rate.

Total Without GST ₹

Total with GST ₹

● GST at applicable rate will be reimbursed in actual to the contractor only after submission of sufficient proof

of such payment made to the Govt. For claiming refund of GST agency has to submit invoice in the format as

prescribed by the Act.

● GST at the applicable rate will be levied on the total Schedule – “B”. GST will be subject CGST, SGST, UTGST,

IGST act and rules, regulation and notifications issued by Government / MGVCL from time to time. Contractor

has to classify the supply / service according to the GSN / SAC of CGST Act, 2017. MGVCL also reserve the

right of classification in case of any misclassification of goods / services. Contractor has to provide invoice in

standard format as per CGST act and GST invoicing rules. GST will be reimbursed subject matching of

transaction in GST return. In case of mismatch, amount of GST will be retained from the subsequent invoice of

the contractor. For final bills, GST will be retained and reimbursed on matching the same in GST return and

after receipt of request from the contractor.

● Labour welfare cess will be deducted from RA & Final bills considering new construction work as per latest

prevailing law.

● The material shall be got tested from Government recognized laboratory i.e.(R & B) or field laboratory of

GERI (R&B) or any Government approved laboratory, for which 1% of the executed amount to tender shall be

recovered from the contractor from the RA Bill & Final Bill. Contractor should pay testing charges in advance as

instructed by EIC (Engineer in charge) and same shall be adjusted in the recovery amount on production of

proof of Original Bills paid to concerned laboratory. However, if the charges increase over 1% order amount,

no excess recovery shall be made from the contractor and such amount paid by the company directly to testing

● Security Deposit shall be released on successful completion of one year from actual date of completion or

finalization of final bill whichever is later. For special items like waterproofing, anti-termite treatment

separate amount shall be deposited as per item.

For & On Behalf of MGVCL

Chief Engineer ( Projects )

Corporate Office

● I/We am/are willing to carry out the work at rate quoted by me in website www.tender.nprocure.com

for the tender ID NO: 285748 related to the work of “ Renovation of canteen at MGVCL Coporate Office

Campus, Race Course, Vadodara..”

● I/We hereby accept all the conditions and specifications of this tender document, and accordingly,

● I/We have read & clearly understood the terms, conditions, and Schedule-B & Technical specifications

put by MGVCL on web-site.

Seal & Signature of Contractor.