Provn of certain Minor and Revenue works under GE Dehradun.

Amount

Excavation in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sqm on plan and n exc 1.5 m in depth and getting out in any type of soil out complete all as specified and directed.

Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15 cm deep and getting out complete all as specified and directed.

Material and labour for PCC 1:4:8 type D-2 (using 40 mm graded stone aggregate) cement concrete in foundations,filling and mass concrete complete all as specified and directed.

Material and labour for Reinforced cement concrete type B-1 1:2:4 (using 20 mm graded stone aggregate) as in foundations, including rafts, footings, foundation beams; plinth beam, etc. complete all as specifed and directed.

Returning, filling in soil, including spreading, levelling, watering and well ramming in layers not exc 25 cm etc complete all as specified and directed .

Removing excavated material (soil) n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting poin etc complete all as specified and directed .

Removing excavated surplus soil to a distance exc 250 m and n exc 500 m and depositing where directed at a level n.exc 1.5m above the starting point complete all as specified & directed.

Material and labour for 25 mm thick sand filling under floors or in foundations including watering and consolidation complete all as specified and directed.

Material and labour for Brickwork with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius built in cement mortor 1:6 complete all as specified and as directed .

Material and labour Brickwork with subclass ‘B’ bricks in cement mortar 1:4, straight or curved on plan to any radius in half brick thick walls built in complete all as specified and directed.

Material and labour for rendering 15 mm thick on brick work or concrete surfaces in cement mortar (1:4), finished surfaces even and smooth without using extra cement, complete all as specified and as directed.

Material and labour for rendering 15 mm thick on brick work or concrete surfaces in cement mortar (1:6), finished surfaces even and smooth without using extra cement, complete all as specified and as directed.

Material and labour for 10 mm thick rendering on ceiling concrete surface in cement mortar 1:3, surface finished even and smooth without using extra cement complete all as specified and directed.

Material and labour finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm)etc including preparation of surfaces, complete all as specified and directed.

Material and labour for preparation of newly plastered surface of wall and applying two coat of oil bound distemper over a coat of suitable primer complete all as specified and directed.

Material and labour for two coats of oil bound distemper on old plastered surfaces of ceiling including preparation of surfaces complete all as specified and directed.

Material and labour for TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed.

Description all as per item No 19 here in above but 5mm dia and over upto and including 10mm dia as in stirrups, spacers and binders complete all as specified and as directed.

Material and labour for reinforced cement concrete type B-1, 1:2:4 (using 20 mm graded stone aggregate) as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specifed and directed.

Material and labour for 18 to 20 mm thick Granite(of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills,cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed.

Material and labour for use and waste formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter etc complete all as specified and directed .

Material and labour for use and waste formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/ PCC bands in walls, horizontal or sloping and similar work exc 10cm but n exc 20cm wide complete all as specified and directed .

Material and labour cement concrete 1:2:4, type B-0 (using 12.5 mm graded stone aggregate) 40mm thick in Damp proof course to horizontal or vertical surfaces including necessary formwork complete all as specified and directed.

Material and labour for RCC Type B-1, 1:2:4 nominal mix (using 20 mm graded aggregate) in Beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and directed.

Material and labour for 25 mm thick PCC 1:2:4 type B-0, using 12.5 mm graded stone aggregate as in floors, to receive surface of tile complete all as specified and directed.

Material and labour 75 mm thick PCC (1:4:8) type D-2 using 40 mm graded stone agg as in sub base complete all as specified and as directed.

Material and labour Glazed ceramic tiles coloured 450 x 350mm, 300mmx 450mm, 600x300 mm 7 to 8 mm thick in vertical surfaces, set and jointed on vertical surface in neat cement slurry @ 3kg per sqm and pointed in white or colour cement to match over and including 10 mm thick plaster in cement mortar 1:4 etc complete all as specified and and as directed

Material and labour for non Skid ceramic coloured tiles 7-8 mm thick (Square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm in floors etc. set and jointed in neat cement slurry @ 3kg per sqm and pointed in coloured cement to match of coloured tiles over and including 15 mm thick screed bed in cement mortar 1:6 complete all as specified and directed.

Material and labour for glazed coloured ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, on floor etc. set and jointed in neat cement slurry @ 3kg per sqm and pointed in white or coloured cement to match this surfaces of tiles over and including 15 mm thick screed bed in cement mortar 1:6 complete all as specified and directed.

Material and labour non skid ceramic coloured tiles (300x 300mm) x 7 to 8mm thick as in floor set and jointed in neat cement slurry @ 3kg per sqm and pointed in white or coloured cement to match the surface of tile on and including screed bed or bedding layers of mortar 15 mm thick for laying floor finishes in CM 1:6 etc complete all as specified and directed

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) and removing debries out side defence area complete all as specified and directed.

Material and Labour for 75mm thick PCC 1:3:6 type C-1 using 20 mm graded stone aggregate as in plinth protection or similar work/places, laid in alternate bays and filling the joints with & including bitumen and sand 1:3 by weight, surface finished even and fair without using extra cement, complete all as specified and directed.

Supply and fix Anodised aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified and directed.

Supply and fix 03 mm thick plain sheet glass, ordinary quality and glazing with oil putty or wooden beads in square n exc 0.5 Sqm in each pane and complete all as specified and directed.

Supply and fix 04 mm thick plain sheet glass, ordinary quality and glazing with oil putty or wooden beads in square n exc 0.5 Sqm in each pane and complete all as specified and directed.

Material and labour for preparation of wall and applying wall care putty 1 to 1.5 mm thick to make the surface smooth complete all as specified and directed.

Supply and fix for mild steel framed work such as door frames, grills, gratings, etc, with ends of bars shouldered and / or riveted or forged into spikes; framed guard bars; frame work of water tanks and similar work confirming to Fe-290 Gde-E-165 including necessary welding, drilling hole complete all as specified and directed.

Material and labour for two coats of synthetic enamel paint over a coat of red oxide primer on new steel surfaces of any description over 10 cm width or girth including preparation of surfaces complete all as specified and directed.

Supply and fix 1000 ltr Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I, including supply & fix 20 mm dia GI light grade wash out pipe 450 mm long with plug and 20 mm dia GI light grade over flow pipe 600 mm long with fitting complete all as specified and directed.

Dismantling of water tanks of capacity exc 250 ltrs and n.exc 1500 ltrs and removing from site complete all as specified and directed.

Supply and fix 20mm ball brass valve, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed etc complete all as specified and as directed

Supplying, fixing, jointing and testing galvanised steel water tubing 15 mm dia bore medium grade with all fittings such as bends, tees, nipples, elbows, socket reducers, etc, fixed to walls and ceilings or laid in floors complete all as specified and directed.

Supplying, fixing, jointing and testing galvanised steel water tubing 20 mm dia bore medium grade with all fittings such as bends, tees, nipples, elbows, socket reducers, etc, fixed to walls and ceilings or laid in floors complete all as specified and directed.

Taking up or down 15 mm steel tubing and connections and removing form site , complete all as specified and directed.

Taking up or down 20 mm steel tubing and connections and removing form site , complete all as specified and directed.

Material and labour cutting chases for concealed water tubing or concealed conduit wiring, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges, etc., cutting not exc 10 cm width or girth complete all as specified & directed.

Supply and fix vitreous china wash down water closet pan (pedestal pattern) rimless wall hung WC with UF soft close slim seat cover, Hinges and acessories etc complete all as specified and directed.

Supply and fix vitreous chinaware wash down water closet pan fency type including fixing bolt, and flushing cistern, Dual flush single piece wall mounting EWC with soft close seat cover fittings 'P' or 'S' trap complete all as specified and directed.

Supply and fix 10 litres capacity PVC low level valve less symphonic action type flushing cistern white with inlet, float valve, float and handle including brackets with 32 mm dia PVC pipe 600 mm long complete all as specified and as directed.

Supply only PVC connection 15 mm dia 450 to 600 mm long with brass fly nut at both ends complete all as specified and as directed

Supply and fix PVC connection of 45 cm length including brass nuts complete all as specified and as directed

Supply and fix vitreous chinaware wash hand basin counter top of size 575 x 430 x 175 complete including waste coupling ,waste pipe including fixing arrangement and cutting for and pinning in walls & making good complete all as specifed and directed.

Supply and fix 15mm dia swan neck pillar tap (for oval type WHB) brass chromium plated with capstan heads, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, and fixed complete all as specified and as directed.

Supply and fix pillar taps, brass, with capston heads, fancy type chromium plated, screwed down high pressure with or without lettered 'Hot' or 'cold' with long screwed shanks and flynuts screwed for 15mm bore iron pipe and fixed complete all as specified and directed.

Supply and fix 15 mm dia bore chromium plated concealed stop cock, complete all as specified and as directed.

Supply and fix fancy type brass chromium plated shower rose with shower arms with swivel joints including fixing to steel pipe of 15 mm dia or union completeall as specified and as directed .

Supply and fix brass chromium plated angle cock/ stop cock 15 mm dia screwed for iron pipe or brass ferrule completeall as specified and as directed

Supply and fix 15 mm bore bib taps, chromium plated cast copper alloy, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and as directed.

Supply and fix bib tap long body fancy type cast copper alloy chromium plated with crutch or butterfly handle screwed down screwed for iron pipe or brass ferrule or fixed for 15 mm dia bore pipe complete all as specified and as directed

Supply and fix brass chromium plated towel rail, 20 mm dia 'D' type 60 cm long between flanges complete all as specified and directed.

Supply and fix fancy type glass corner 300mm radius of 10mm thick toughned glass with CP railing fixed with fancy type screws complete all as specified and directed.

Supply and fix soap dispenser with glass bottle in toilet block each one complete all as specified and directed.

Supply and fix fancy type brass chromium plated soap dish of 160x160x90 mm complete all as specified and directed.

Supply and fix toilet roll Holder complete all as specified and as directed.

Supply and fix health faucet brass chromium plated suitable for 15mm dia pipe with 1 or 1.25metre long flexible tube and ABS wall hook fixed to wall complete all as specified and directed.

Supply and fix CP Brass 3 in 1 hot & cold 15 mm dia wall mixer for mixing hot & cold water with telephonic shower provn with connecting legSupply and fix langes complete all as specified and directed.

Supply and fix CP grating 100mm to 125 dia round fix on floor/ nahani trap with hole/without fixed with cement mortar, complete all as specified and directed.

Material and labour PVC (SWR) floor trap plain with grating including jointing with solvent cement 75 mm bore outlet complete all as specified and as directed.

Supply and fix PVC (SWR) soil waste & vent pipe in any length without ears laid in floors, trenches or fixed to wall complete for 75 mm dia bore of pipe complete all as specified & directed.

Supply and fix PVC (SWR) soil waste & vent pipe in any length without ears laid in floors, trenches or fixed to wall complete for 110 mm dia bore of pipe complete all as specified & directed.

Supply and fix PVC (SWR) bends, T, reducer any radius with rubber ring joints, fixed to wall / floor / in trenches for 75 mm dia pipe complete all as specified and directed.

Supply and fix PVC (SWR) bends, T, reducer any radius with rubber ring joints, fixed to wall / floor / in trenches for 110 mm dia pipe complete all as specified and directed.

Supply and fix 75 mm dia PVC (SWR) vent cowl complete all as specified and directed.

Supply and Fix 110 mm bore UPVC (SWR) junction single, (Single T) equal or unequal complete all as specified and directed.

Supply and fix 15mm dia brass chromium plated centre hole wash basin mixer with accessories in wash basin for mixing hot and cold water, screwed down for 15 mm dia bore GI Pipe complete all as specified and directed.

Supply and fix 75mm bore PVC (SWR) couplers for PVC pipe to join two pipe in series complete all as specified and directed

Supply and fix 75 mm bore UPVC (SWR) pipe pressure 4kgf/cm2 single socketed in any length with rubber ring, fixed on wall / laid in trenches complete all as specified and directed.

Supply and fix 110 mm bore UPVC (SWR) pipe pressure 4kgf/cm2 single socketed in any length with rubber ring, fixed on wall/ laid in trenches complete all as specified and directed.

Supply and fix 75 mm bore UPVC (SWR) bend with oval acess door ,'T'socket reducer etc complete all specified and direceted.

Supply and fix 110 mm bore UPVC (SWR) bend with oval acess door ,'T'socket reducer etc complete all specified and directed.

Supply and fix pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and directed.

Supply and fix pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and directed.

Material and labour for PCC (1:4:8 ) type D-2 as in bed to drain pipes including packing under and haunching against the sides of pipes after they are laid and tested for 150 mm bore pipe complete including dismantling complete all as specified and directed.

Material and labour for reinforced concrete pipes,150mm dia class NP-2 laid and jointed complete with collars complete all as specified and directed.

Cutting into existing manholes for connecting new drains making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 or 3/4 section ) in cement concrete 1:2:4 type B1 using 20 mm graded stone aggregate finished smooth and reforming benching as required for 150mm dia pipes complete all as specified and directed.

Supply & fixing factory made single extruded WPC (Wood polymer composite) Solid door frame/ chowkat of size 125X65 comprising of virign PVC polymer of K value 58-60 (suspension grade ) calcium corbonate and natural fibers ( wood powder/rice husk /wheat husk) and non toxic additives (max toxicity index of 12 to 100 gms) fabricated with mitred joints and applying PVC solvent cement and screwed with full body threaded star headed SS screws having min frame density of750Kg/cum screw withdrawal strength of 2200 N (face) & 1100 N edge,minimum compressive strength of 58 N/mm2, moduus of elasticity 900N/mm2 and resistance to spread of flame of class 'A' category with property of being termite / borer proof, water / moisture proof & fire retardant & fixed in postion with SS dash fasterns / hold fast of required dia and length,colour of door frame to match that of shutter complete all as specified and directed.

Supply & fixing factory made single extruded WPC (Wood polymer composite) Solid door frame/ chowkat of size 100X50 comprising of virign PVC polymer of K value 58-60 (suspension grade ) calcium corbonate and natural fibers ( wood powder/rice husk /wheat husk) and non toxic additives (max toxicity index of 12 to 100 gms) fabricated with mitred joints and applying PVC solvent cement and screwed with full body threaded star headed SS screws having min frame density of750Kg/cum screw withdrawal strength of 2200 N (face) & 1100 N edge,minimum compressive strength of 58 N/mm2, moduus of elasticity 900N/mm2 and resistance to spread of flame of class 'A' category with property of being termite / borer proof, water / moisture proof & fire retardant & fixed in postion with SS dash fasterns / hold fast of required dia and length,colour of door frame to match that of shutter complete all as specified and directed.

Supply and fix factory made single extruded WPC (Wood polymer Composite) Solid moulded Flush Door Shutter of 30 mm size comprising of virgin PVC resin of K value 58-60 (Suspension Grade), Calcium Carbonate and natural Fibers (Wood Powders/ rice husk/ wheat husk) and Non toxic additives (max toxicity index of 12 for 100 gms) having min density of 650 Kg/Cum and screw withdrawal strength of 1800 N (Face) &900 N (Edge) Minimum Compressive Strength of 50 N/mm2, Modulus of elasticity 850N/mm2 and resistance of spread of flame of class A category with property of being Termite/ Borer proof. Water/ Moisture Proof, Fire retardant and fixing with stainless steel but hinges of required size with necessary full body threaded star headed counter sunk SS Screws. All as per direction of Engineer - in- Charge, Material test certificate and authentication should be compulsory provided by the manufacturing company.

Supply and fix Butt hinges 100 mm size medium weight cold rolled stainless steel and fixed complete all as specified and as directed.

Supply and fix stainless steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with stainless steel wire staples complete all as specified and directed.

Supply and fix 150 mm long steelness steel handle, cast type,complete all as specified and as directed

Supply and fix 150 mm long aluminium handle, cast type, anodised etc complete all as specified and as directed

Supply and fix stainless steel tower bolt 200 mm long of extruded section etc complete all as specified and as directed

Supply and fix stainless steel tower bolt 125 mm long of extruded section etc complete all as specified and as directed

Supply and fix Aluminium anodised tower bolt 200 mm long of extruded section etc complete all as specified and as directed

Supply and fix 150 mm long stainless steel barrel tower bolt of extruded section and fixed complete all as specified and as directed.

Supply and fix 100 mm size solid in one piece stainless steel handles, all in 304 grade and fixed in stainless steel screws all as directed complete all as specified and directed.

Supply and fix stainless steel sliding door bolt size 300 mm with hasp, staple (bolt ype) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-Complete all as specified and directed.

Supply and fix for 300 mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts & sliding bolts of extruded sections or cast aluminium alloy & fixed and compete all as specified and directed.

Supply and fix floor door stopper 150mm overall length of cover plate of aluminium alloy body and tongue anodised with hard drawn steel spring fixed to floor complete all as specified and directed.

Material and labour for providing precast cement concrete 1:2:4 nominal mix type B1 (using 20 mm graded aggregate) set in cement mortar 1:4 in landings, cover slabs (for man holes etc.) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces complete all as specified and directed.

Taking down of cement or cement lime plaster any description from brick or stone wall , ceiling etc. including raking out of joints, hacking for key, scrubbing down with water etc.complete all as specified and directed.

Material and labour for preparing of new surfaces of walls and applying two coats of cement base paint, complete all as specified and as directed.

Material and labour for moorum / red bajari filling in floors or pavings, laid in layers n exc 15 cm thick, spread, levelled and rammed including watering and duly consolidating complete all as specified and directed.

Material and labour for hardcore of gauge exc 63 mm but n.exc 100 mm deposited, spread and leveled in layers n.exc 15 cm thick, watered and rolled/rammed to a true surfaces in broken stone or boulder complete all as specified and as directed.

Supply and fix factory made steel window with side hung shutters including projecting/box/pin type hinges with steel handle, steel peg stay, complete without glazing bars, dovetailed or welded complete all as specified and directed.

Supply and fix factory made steel window with side hung shutters including projecting/box/pin type hinges with steel handle, steel peg stay, complete with glazing bars, dovetailed or welded complete all as specified and directed.

Supply and fix factory made steel ventilator fixed type half glazed and half gauged with and including hardware fittings, glazing, wire gauge including projecting/box/pin type hinges with steel handle, steel peg stay, complete with glazing bars, dovetailed or welded complete all as specified and directed.

Supply and fix factory made steel ventilator with top hung shutters including hinges with steel handle, steel peg stay, tower bolt etc.complete all as specified and directed.

Supply and fix Vitreous China Urinals, half stall type white (back or corner wall type), complete including providing and fixing plugs, bedding urinals against wall in CM 1:2, securing urinals to plugs with and including 60 mm long brass screws, pointing around urinal back in cement, CP waste coupling, waste pipe, automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe complete. complete all as specified and as directed.

Supply and fix vitreous chinaware wash down water closet pan (Padestal pattern) fency type (EWC) including fixing bolt, with soft close seat cover fittings 'P' or 'S' trap,including seat cover complete all as specified and directed.

Supply and fix vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm, white, with integral foot rests (excluding flushing cistern and flush pipe) water closet, including connection to trap and to flushing pipe, anti syphonage pipe etc, and making good to floor complete all as specified and as directed.

Supply & fixing ball valves, high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball, screwed for iron pipe and fixed for 25 mm bore size complete all as specified and directed.

Supply and fix 20 mm bore Gun-metal globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed.

Supply and fix Vitreous China wash hand basin, white, flat back type of size 550mm x 400 mm fixed on and including cast iron cantilever bracket, 32 mm dia brass waste coupling and 32 mm dia PVC waste pipe, grating dome, etc including fixing of tap, waste fitting etc complete all as specified and directed. Note: Pillar tap shall be measured as supply only under respective item.

Supply and fix steel work in tubular truss, poles, purlin, water stagging including special shaped washer etc complete using ERW or induction butt welded tubes conforming to IS 1161-1998 grade St-240 quality-A complete all as specified and directed.

Supply only liquid water proofing compound complete all as specified and directed.

Material and labour for providing and fixing Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge.

Material and labour for providing and fixing Powder coated aluminium (minimum thickness of powder coating 50 micron) for shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/ neoprene gasket required (Fittings shall be paid for separately) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws all complete as per architectural drawings and the directions of Engineer-in-Charge

Supply and fix 4 mm thick Figured glass, pin head type and glazing with oil putty in squares n.exc 0.5 sq. m in each pane complete all as specified and directed.

Supply and fix single piece slim concealed Cistern with wall mounting frame, installation kit and "s type" drain pipe connection set for wall hung WC (with flush control panel) complete all as specified and directed.

Supply and fix bathroom vanity size 1200 x 600 x 800 mm HDHMR plywood. It is made up with pre laminated board that make this cabinet rust free, water resistance, termite resistance, anti corrosive, and scratch resistance washbasin for bathroom cabinet, shelf and mirror is designed to enhance the utility and appeal of your bathroom fungal and bacteria resistant for are heavy duty stainless steel hinges for doors and telescopic channels drawers washbasin cabinet grade quality and the mirror size 600 x 900 mm modiguard and saint gobian mirror complete all as specified and directed.

Supply and fix exposed part kit of single lever basin mixer wall mounted consisted of operating lever, cartridge sleeve, wall flange, nipple & spout compaitble with ALD - 233N & 235N complete all as specified and directed.

Supply and fix for 75 mm bore out let cast floor trap spun pipe (conforming to IS 3989) incl cockroach trap with gratings including including jointing to waste pipe fixed in cement concrete tpe B-1 (1:2:4) etc complete all as specified and as directed

Material and labour for applying two coats of acrylic distemper over a coat of primer, white or tinted over 0.75 to 1 mm thick wall care putty in two coat complete all as specified & directed.

Material and labour for use and waste formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressum-mers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc. for rough flat finished surfaces of concrete complete all as specified and directed.

Material and labour for use and waste formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) complete all as specified and directed.

Material and labour for two coat weather coat exerior emulsion paint in any tint on already prepared surfaces of walls complete all as specified and directed

Material and labour for taking down chowkat with shutter any description n. exc 1.5 Sqm each complete all as specified and as directed.

Supply and fix factory made 100% solid wood plastic composite (WPC) door frame of size 75 mm x 50 mm x 50 mm made from wood plastic composite (single extruded process) material with density 780 Kg/Cum from ISO certified company door should be water proof termite proof fire retardant and having good screw holding capacity all as specification and drawing complete all as specified and directed.

Supply and fix 30 mm thick moulded WPC factory made 100% solid door (conforming as per IS-4020) made from 100% lead free single extruded with 2, 4 or 6 raised panel design on the front side with 10 mm deep mould on single side with wood grain texture and back side palin with density not less than 600 Kg/cum. Manufactured by an ISO : 9001-2015 certified company. The door should be water proof, termite proof, fire etardant and having screw holding capacity complete all as specified and directed.

Material and labour for prepolished coloured (Red/ Yellow) machine pressed precast concrete interlocking paver blocks of any shape and size confirming to IS 15658-2006 of 80 mm thickness M-40 grade with grey cement and pigment complete all as specified and directed.

Material and labour PCC 1:2:4 type B-1 using 20 mm graded stone aggregate as in benching to drain, holdfast, padding to roof/chhajja, coping, bed block etc. and the like edge slightly rounded or chamfered including necessary use and waste of form work complete all as specified and as directed.

Supply and fixing for hollow PVC wall lining consisting of 5 mm thick plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specification and drawing complete all as specified and directed.

Material and labour for Vitrified Ceramic tiles light shade 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. over and including screed bed15 mm thick in CM 1:6 set and jointed in neat cement slurry and pointed in white or coloured cement to match with tile complete all as specified and directed.

Description all as per item No137 above but as in skirting and including 10 mm thick rendering in cement mortar 1:4 complete all as directed and specified.

Supply and fixing for powder coated aluminium standard hollow section as mentioned below window frame (Bombay sliding) with two glazed shutter and one nos wire gauged shutter sliding type, with aluminum sections as per Series-A(15mm) 3 track of Jindal section numbers for sliding windows, and glazed with glass 5mm thick, fixed with glazing clips, aluminium grill with mesh size 75 mm and aluminium bar 6 mm XPM type, rubber beading / gasket anodised beading, screw and lock type handle of size 75mm, 2 Nos aluminum tower bolt 150mm long etc, complete all as specified and directed by Engr-in-charge. Shutter Top & bottom size:- 37.50 x 15.00 x 1.60 mm Shutter inner lock size:- 37.50 x 15.00 x 1.60 mm Shutter side (Handle) size:- 37.50 x 15.00 x 1.36 mm Chowkhat bottom size:- 50.30 x 26.00 x 1.20 mm Chowkhat top & sides size:- 50.30 x 26.00 x 1.00 mm Make: (i) Anodised aluminum section : Jindal / Hindalko / Indalco (ii) Particle board: Navipan / Puratuff / Kitlam (iii) Glass: Saint gobain / Modi guard / Tata

Supply and fixing for anodised aluminum powder coated door made out of hollow extruded aluminum section as mentioned below. Each door having two Disc or D type handle, two aluminum tower bolt 200 mm size, one brass mortice lock of 6 lever with key and one hydraulic door closure, shutter to be partly glaze with 5mm thick tinted coloured glass in upper panel and partly pannelled with 12mm thick both side pre-laminated particle board in lower panel fixed with glazing clip, rubber beading/gasket, anodised aluminum beading screw complete all as specified and directed. Chowkhat Frame:- 101.60 x 44.45 x 1.54 mm Shutter Vertical style:- 83.00 x 44.45 x 1.54 mm Shutter Middle Rail:- 83.00 x 44.45 x 1.54 mm Shutter Top Rail and bottom Rail:- 114.30 x 44.45 x 1.54 mm Make: (i) Anodised aluminum section: Jindal / Hindalko / Indalco (ii) Particle board: Navipan / Puratuff / Kitlam (iii) Glass: Saint gobain / Modi guard / Tata

Material and labour for providing & fixing false ceiling of Designer tile Ivory painted (High Pressure Steam cured) of 4mm thickness (as per IS : 14862) of size 595x595mm and any one of the design (Cascade or electra) in true horizontal level, suspended on inter locking metal grid of hot dipped galvanised steel section (Galvanised @120 grams, both side inclusive and black painted groove on all T webs) consisting of main T runner with suitably spaced joints to get required length and 15x32mm made from 0.30mm thick sheet spaced at 1200mm c/c and cross 'T' of size 15x32mm made of 0.30mm sheet 1200mm long spaced between main "T" at 600 mm c/c to form a grid of 1200x600mm and secondary cross "T" of length 600mm and size 15x32 mm made of 0.30mm thick sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 24x22x0.40mm and laying false ceiling tiles in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main "T" runners to be suspended from ceiling using GI soffit cleats fixed to existing RCC lintel with dash fasteners, GI adjustable wire of 4mm dia with galvanised butterfly level clips, spaced at 1200mm c/c along main 'T', bottom exposed width of 15mm of all 'T'' sections of 4mm dia GI wire shall be pre-painted with polyester paint and black painted groove at center of size 4mm depth and 4.5mm width complete all as specified and directed.

Taking down carefully copper/Aluminum point wiring (light, fan socket and power) complete including switches, ceiling rose lamp holder, light fitting any type and fan regulator etc and removing from site and making good disturbed surfaces of walls floors etc. complete all as specified and directed by Engr-in-charge.

Material and labour point wiring with 1. 5 Sqmm PVC insulated unsheathed multistranded single core copper conductor cable in PVC consealed conduit wiring and incl making good with factory made modular pressed terminal box (recessed) with 1.5 Sqmm PVC insulated copper conductor earth continuity wire for one light/fan point controlled by one switch.

Description all as per item No 143 above but for one pin 5 A socket outlet on same board complete all as specified and directed.

Description all as per item No 143 above but for one pin 5A socket outlet point on independent board complete all as specified and directed.

Description all as per item No 143 above but with 4 Sqmm cable for one 6 pin 15A socket outlet point on independent board complete all as specified and directed.

Disconnecting and taking down carefully old light fitting of any size, any capacity at any hight and removing from site for offering schedule of credit, complete all as specified and directed.

Supply and fix LED light fitting 1x10 w bulk head fitting complete with accessories and including connecting up with twin core twisted flexible copper conductor cable of suitable size complete all as specified and directed.

Supply and fix LED building security light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum housing and heat resistant complete with driver, lamp bracket with IP 65/66 protection complete including bracket made out of 32 mm bore medium grade GI pipe made to shape with bolts, buts & washers of min 1.2 Mtr incl grouting of nuts or fasteners clamps and conductor to fitting with 3 core 1.5 sqmm PVC insulated cable complete all as specified and directed. Note: The unit rate include for painting to bracket with one coat of red oxide paint and two coat of alluminium paint before fixing.

Supply and fix switch piano flush, button type 5 Amp SP 250V AC complete all as specified & directed.

Supply and fix switch piano flush button type 15 Amp SP 250V AC complete all as specified & directed.

Supply and fix socket outlet 2-in-1, 5 Pin 5 Amps 250V AC complete all as specified & directed.

Supply and fix socket outlet 2-in1,3 pin 5 and 15 Amp flush type 250V AC complete all as specified & directed.

Supply and fix ceiling rose surface bakelite 3 terminals of size 65x25mm complete all as specified & directed.

Supply and fix Sheet metal enclosures with socket plug top and MCB' SPN enclosure with a two pin and earth plug and socket complete with one single pole 20 A MCB complete all as specified & directed.

Supply and fix sheet metal enclosure SPN for DB's when MCB's to be used 4 way with 200 amps bus bar and double door complete all as specified and directed.

Supply and fix MCB SPN 240 Volt 10 KA 40 Amp conforming to IS complete all as specified & directed.

Supply and fix MCB SP 6 to 32Amp complete all as specified & directed.

Taking down old unserviceable sub main wiring of any description and making good the disturbed surface complete all as specified and directed.

Material and labour for submain wiring with 3 runs(1 run for Phase+1 run for Neutral &1 run for Earth) of 4 Sqmm single core,PVC insulated, unsheathed, multistranded copper conductor FRLS cable 1100 volts grade drawn through and including concealed wiring with PVC conduit pipe of medium duty not less than 20 mm dia including necessary steel conduit specials and connecting with suitable size thimble, and making good surface of disturbed wall/ceiling/floor as match with existing complete all as specified and directed. Note:-3 runs of 4 Sqmm size PVC copper cable, and one run of PVC conduit shall be measured as one unit length.

Material and labour for submain wiring with 3 runs(N+P+E) of 1.5 Sqmm single core,PVC insulated, unsheathed, multistranded copper conductor FRLS cable 1100 volts grade drawn through and including concealed/surface PVC conduit pipe of medium duty not less than 15 mm dia including necessary PVC conduit specials and connecting with suitable size thimble complete all as specified and directed. Note:-3 runs of 1.5 Sqmm size PVC copper cable, and one run of PVC conduit shall be measured as one unit length.

Description all as per item No 161 above, but 6 run of 6 Sq mm (3run -Phase, 1 for Neutral & 2 Runs for Earth with recommended colours) and drawn through not less tha 32 mm dia PVC conduit . Note:-6 runs of 6 Sqmm size PVC copper cable and one run of PVC conduit shall be measured as one unit length.

Supply and fix Modular switch single pole, one way, 6 Amps, 1 module, complete all as specified and as directed.

Supply and fix Modular switch single pole, one way, 16 Amps, 1 module, complete all as specified and as directed.

Supply and fix Socket 6 Amps AC 230 Volts 2/3 pin combined 2 modular type complete all as specified and directed.

Supply and fix Socket 6A/16 Amps-2/3 pin AC 230 Volts modular type complete all as specified and as directed.

Supply and fix Switch modular type AC 230 volts 16 Amps one way complete all as specified and as directed.

Supply and fix Modular white cover plate with frame and metal flush box 2 module complete all as specified and as directed.

Description all as per item No 168 above but 3 module complete all as specified and directed.

Description all as per item No 168 above but 4 module complete all as specified and directed.

Description all as per item No 168 above but 6 module complete all as specified and directed.

Description all as per item No 168 above but 8 module complete all as specified and directed.

Supply and fixing LED lights fitting 1x 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed.

Supply and fix LED Mirror light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.

Supply and fix Exhaust fans AC single phase 230/ 240 V, 50 Hz with louver of size 300 mm sweep, complete with louvers, shutters and connecting up ceiling rose to connector block of fan including making of holes and grouting of nuts and bolts PCC (1:2:4) B-1 block including complete all as specified and directed.

Supply and fix Water heater storage type, electric, capacity 25 litres AC single phase 230/ 240 V o and connecting up including making of holes and grouting of nuts and bolts PCC (1:2:4) B-1 block complete all as specified and directed.

Supply and fix RCCB for earth leakage, overload & short circuit protection four pole 30 mAof capacity 63 Amps complete all as specified and directed.

Supply and fix sheet metal enclosures SPN 240 volt 8 way with suitable rated bus bar for Single door IP-43DB's complete all as specified and directed .

Supply and fix MCB TPN 240 Volt 10 KA 63 Amp conforming to IS complete all as specified & directed.

Material and labour for earthing complete with GI or steel earth plate electrode 60cm x 60cm x 6mm thick buried directly in ground (earth pit not less than 2.25 Mtrs below ground level) with top edge of earth plate not less than 1.5 Mtrs below ground level connected to GI earth strip 32mmx6mm by means of nuts, bolts, thimbles, chuck nuts, washers of GI or steel, including PCC (concrete chamber) shall be PCC 1:3:6 type C-1 using 20mm graded stone aggregate, with fair finish internal surface of concrete chamber shall be given 15mm thick plaster in CM 1:4, funnel with wire gauge of (0.68mm) 8 mesh per liner inch, 80 mm thick RCC pit cover 320 mm x 320 mm of RCC 1:2:4 type B-1 using 20 mm graded stone aggregate reinforced with XPM, JALLI and charcoal dust and common salt all as shown in electrical plate No 3 of MES SSR Part-I and specified including provision of earth wire protected by 40mm dia medium grade GI pipe and watering pipe shall be 20mm bore medium grade GI pipe, and including all excavation and earth work & connecting the earthing to an earthing test point /transformer nuetral/body/ Lt panel etc. and testing on completion, complete all as specified & directed. NOTE: (i) Earth lead strip and its protection pipe upto and including 7.5 mtr only from the top of earth electrode are included under this item. (ii) Any joints in earth lead from earth electrode to test point shall not be allowed/permitted. (iii) If the desired earth resistance is not found within permissible limit shall be re done by contractor at no extra cost.

Material and labour and installation bus bar, factory fabricated bus bar chamber out door pedestal type made out of 2.0 mm thick CRCA sheet siz 750x500x400mm duly painted with powder coating, simens grey /RAL fitted with four Nos aluminium bus bar of capacity 400 Amps duly mounted epoxy insulator , cable connections of incoming and outgoing cables duly insulated PVC heat shrinkable sleeve 1.1 KV grade including one No MCCB 200 Amps , 04 pole , 16 KA , with adjustable thermal stetting Ics=100% Icu, including glands c/p lugs etc including 50x50x6mm angle iron frame 450mm height above ground level and 450mm below ground level , angle iron frame shall be embeded in PCC (1:2:4) type B 1 block of size 200x200x200mm complete all as specified and directed

Supply and laying XLPE insulated galvanised steel strip or wire armoured electric power UG cable with stranded aluminium conductor 1100 V grade of size 25 sqmm 4 core complete all as specified and directed.

Matrial and labour for sand cushioning to under ground cable, 8 cms thick before laying the cable and 15 cms thick after laying & stretching the cable in trenches, including hand punning and consolidating, complete all as specified and directed. Note:- For payment purpose punned thickness shall be measured.

Matrial and labour bricks, old size sub class `B' laid in trenches with width wise along the alignment of the cable as protection complete all as specified and directed.

Supply and fix tube 'Light' grade galvanised with all fitting laid in trenches, fixed to wall and floor of 50 mm dia for cable protection complete all as specified and directed.

Material and labour point wiring with 1.5 Sqmm (Nominal area) FRLS PVC insulated and unsheathed single core cable 1100 Volts grade with stranded copper conductor in existing steel/PVC conduit with continuous earth wire 1.5 Sqmm FRLS PVC insulated, unsheathed stranded copper conductor cable and connected to common earth dolly, with and including 1.6mm thick cadmium plated sunk MS pressed steel terminal boxes with 3.0 mm thick hylum sheet cover fixed with brass screw complete with all accessories for one light point/Fan point controlled by one ,one way switch.

Description all as per item No 186 above but one three pin 5 Amps socket out let on the same board with other switches complete all as specified and directed.

Description all as per item No 186 above but one three pin 5 Amps switch socket out let on the independent board with other switches complete all as specified and directed.

Description all as per item No 186 above but one three pin 15 Amps switch socket out let on the independent board with 2.5 sq mm PVC insulated FRLS copper conductor and 1.5 Sqmm FRLS copper conductor for continuous earthing complete all as specified and directed.

Supply and fix round shaped LED downlights are made with injection moulded polycarbonate housing with snap fit/screw fit arrangement of polycarbonate/aluminium spun ring for surface mounting of capacity 12 Watt with all accessories and including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.

Supply and fixing LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and directed.

NOTE:- Amount of credit of Rs. 9884.00 for retrieved materials is mentioned in Schedule of Credit Page No 38 of tender documents in pdf form which will be deducted offline while acceptance of tender.

V S ENTERPRISES (BID ID -3307815)

Asian Builder (BID ID -3306683)

VERDHMAN ASSOCIATES (BID ID -3308072)

new hindustan construction company (BID ID -3308708)