ELECTRICAL WORKS FOR SITE PREPARATION FOR INSTALLATION OF MACHINES AT SLRDC WORKSHOP IN HAL FACTORY AREA

Name of the Individual / Firm / Company: * Mandatory

Type of ownership

Details of Constitution or Legal Status such as certificate of incorporation, shops and establishments, Contractor registration No etc.,

Address for correspondence:

GST NO.:

PAN No.:

Contact details

Please Enter Contact person Name

Pls Enter Mobile No

Average annual financial turn over during the last 3 years, ending financial year 2024 [ should not be less than 30% of Amount put to tender]. Turnover for 3 years are compulsory.

TURN OVER IN Rupees

Pls Enter Turn over in Rs. for all the 3 years

ESI & PF Nos with proof (If any)

Related Document to be Uploaded to e-Procurement Portal

Bank(s) details: [Copy of the cheque leaf to be uploaded]

Related Document to be Uploaded to eProcurement Portal (Note Canceled cheque leaf to be uploaded)

Latest Bankers Solvency Certificate from Nationalized/ scheduled Bank issued NOT before 12 months from the date of Tender submission.

Pls Enter Details to 'Name of the Bank' , 'Date of Issue','Value in Rs

Experience of having successfully completed similar works during last 7 years ending last day of month previous to the one in which applications are invited. [Latest work experience certificate may be uploaded] (i) THREE similar completed works each costing not less than the amount equal to 40% of the estimated cost. (ii) TWO similar completed works each costing not less than the amount equal to 50% of the estimated cost. (iii) ONE similar completed work each costing not less than the amount equal to 80% of Amount put to the tender.

80% (One Work)

Type of Work: [ Incase of private works the same shall be supported with TDS certificate]

Please enter Details for Work No 1

Type of Work: [ Incase of private works the same shall be supported with TDS certificate]

Pls Enter Details for Work No II

work done

Type of Work: [ Incase of private works the same shall be supported with TDS certificate]

Pls Enter Details for Work No III

Details of person holding the power of Attorney (If different from contact person)

Related Document to be Uploaded to eProcurement Portal

Pls Enter Details for Person holding Power of Attorney

DECLARATION I

Pls Accept The Delarication

DECLARATION II

Pls Accept the Delaration II

Description of Work

REMOVAL OF ITEMS: Removal, Dismantling, Shifting & Handing over of Cable terminations, PVC / MS conduit pipes with wiring, Cables, Switch Boards, Switch Socket Boards, Tube light fittings with down rods,fans etc. as per the direction of in charge engineer. The removal and shifting shall be done for above materials with all accessories complete at SLRDC CNC Cell

POINT WIRING: Supply & fixing of following light points etc with 2 runs of 1.5 sq. mm FRLS PVC insulated flexible copper conductor 1.1kV grade concealed suitable diameter PVC Conduit pipe of 2 mm thick/PVC concealed including supply & fixing of 10 Amp @ 250V AC SP Modular switches of approved quality, color & design with 2 mm thick G.I/PVC modular box including inner plates and outer plates, concealed in wall and inter connection complete. Make: Havells / fincab / Finolex 2 Light points controlled by one switch 5 / 10 A modular type SP switch Make: Legrand/Siemens/L&T/GE.

Supply and fixing of (10 -12 ) Watt Emergency LED cirular/Square recess / surface mounted fittings as per direction of EIC: Battery capacity should be minimum of 2200 mAH & Lighting back up time will be minimum 2 hours Makes: Havells/Crompton/Philips/ Orient/ Wipro/ Bajaj / FA / Ever ready

Providing of LED Light Fixtures: Supply, installation, testing & commissioning of Recessed Mounted 2 X 2 ft (36-40) watt LED Full out put Luminaries with CRCA power coated With high diffuser efficiency of 3600 lumens with necessary fixing accessories as per site & inter-connection complete Make: philips / CGL / Wipro / FA /Havells / Bajaj

BLDC ceiling fans: Supply and provisioning of BLDC ceiling fans, 1200mm sweep, 5 star rated on existing roof with electronic Regulator, downrod of required length as per site condition and all fixing accessories as directed by EIC. Make: Crompton / Havells / Orient / Usha / Atomberg

POWER WIRING: Providing and laying of 2 runs of 2.5 sq mm and 1 runs of 1.5 sq.mm 1100 volt grade FRLS PVC insulated flexible copper conductor with suitable dia PVC conduit conductor flexible wire for power / sub mains with suitable size 2 mm thick PVC conduit with bends, special junction boxes laid concealed / on existing cable trays / on the surface with suitable fixing clamps, nuts, bolts with crimping lugs at DB and Switch termination and inter connection complete etc as per site. The scope also includes wiring of the testing tables without conduit for different power supplies in the existing trunking. Make: Polycab/Havells/Finolex only)

POWER WIRING: Providing and laying of 4 runs of 4.0 sq mm and 2 runs of 2.5 sq.mm 1100 volt grade FRLS PVC insulated flexible copper conductor with suitable dia PVC conduit conductor flexible wire for power / sub mains with suitable size 2 mm thick PVC conduit with bends, special junction boxes laid concealed / on existing cable trays / on the surface with suitable fixing clamps, nuts, bolts with interconnections complete.. Make: Finolex / polycab/ Havells / FortuneArt / L&T

POWER WIRING: Providing and laying of 4 runs of 6.0 sq mm and 2 runs of 4 sq.mm 1100 volt grade FRLS PVC insulated flexible copper conductor with suitable dia PVC conduit conductor flexible wire for power / sub mains with suitable size 2 mm thick PVC conduit with bends, special junction boxes laid concealed / on existing cable trays / on the surface with suitable fixing clamps, nuts, bolts with interconnections complete.. Make: Finolex / polycab/ Havells / FortuneArt / L&T

POWER WIRING: Providing and laying of 4 runs of 10 sq mm and 2 runs of 6 sq.mm 1100 volt grade FRLS PVC insulated flexible copper conductor with suitable dia PVC conduit conductor flexible wire for power / sub mains with suitable size 2 mm thick PVC conduit with bends, special junction boxes laid concealed / on existing cable trays / on the surface with suitable fixing clamps, nuts, bolts with interconnections complete.. Make: Finolex / polycab/ Havells / FortuneArt / L&T

Providing of Independent Modular Sockets & Switches: Supply and fixing of following items with 2 mm thick GI modular box independent concealed in the wall with inter connection complete. 3 No, 6 Amp 3/2 pin multiple universal socket controlled by one no.16 Amp switch & 1 No, 16/6 Amp 5 pin multiple universal socket controlled one no.16 Amp switch and 1 No. Make: Legrand/Siemens for 230V Supply

PROVIDING OF MODULAR TYPE IN-DEPENDENT SWITCHES & SOCKETS: Supply and fixing of 2 Nos 6/16 amps 3 pin multiple socket controlled by 2 No. 6/16 amps SP MODULAR switch of approved quality, color & design shall be mounted on suitable cover plate with suitable MS box with inter connection complete as per site requrement.The box shall be mounted on concelled/ surface of wall / floor with all requred ccessories as per site condition. Make:Legrand / Crabtree

MCCB / MCB DISTRIBUTION BOARD Supply, Installation, testing and commissioning of the following factory made MCB / MCCB Distribution Boards (Double door type) IP-54 Cubicle / Enclosure made of 1.6 mm thick CRCA sheet steel, powder coated with approved shade and partitions to segregate phases with suitable 2 Nos of top & bottom cable entry end boxes. The DBs & Cable entry end boxes shall be mounted recessed / surface mounted on wall with suitable iron angle frame & all fixing accessories as per site and inter connection with number sleeves & crimping lugs complete. The rate shall include supply & fixing of 2 Nos (top & bottom) cable end boxes suitable for following DBs.make: Legrand POWER DB 8-Way TPN MCCB DB Incomer:. 1 No,160 A 4POLE (Icu=36 Ka) MCCB Out going: 04 Nos, 63 A ( Type 'C') TP MCB 04 Nos, 32 A ( Type 'C') TP MCB

COPPER PLATE EARTHING:Making Earth pit complete with copper plate 60 cm x 60 cm x 3.15 mm thick electrode and 25 mmx5 mm copper strip covered with suitable sleeve. Copper plate is to be buried directly in ground with top edge of the plate not less than 3.0 metres below normal ground level. Copper strip to be bolted with the earth plate at three points by means of copper bolts, nuts, check nuts and washers. Earth strip to be extended upto earth test point in earth chamber at ground level. Scope of work includes excavation of earth & refilling, drilling hole to electrodes, supply and covering the earth plate with alternate layer of salt and charcoal (not less than 15.0 cm on both side of plate), PCC pit and CI cover, Funnel with watering pipe, wire mesh and copper lugs etc as specified, GI protection pipe of size as specified for protection of earthing lead from top of earth plate upto earth chamber, laying copper strip of length of 5.0 mtrs connecting from test point to mainswitch or switch board or equipment and any other work necessary to complete making earth pit complete in all respect. Note: Earth resistance to be achived 0.5 ohms by connecting all eartpits as grid as directed by EIC

EARTH STRIP:Supply & laying of 25 mm x 5 mm Copper Strip on porciline insulators with suitable sleeve clamped to walls at distance of one meter or on cable trays, run in pipes, run underground etc., as required including interconnection between the earth stations etc., complete as required conforming to IS: 3043-1987. Scope of work includes supply of calmping materials necessary to complete work in all respect as per direction of EIC.

LT CABLING: Supply & laying of 3.5 core x 95 SQMM Aluminium conductor armoured cable of 1100 V grade existing trench under ground trenches available or on surface of the wall / cable tray by supplying all required fixing accessories as per site condition as directed by the EIC. scope includes cable end terminations with suitable glands. Make:Universal (Unistar) / CCI / Gloster/ Nicco / Finolex

SINGLE PHASE INDUSTRAIL SOCKET: Supply fixing, testing and proveing of 20A rated industrial socket distribution boards Universal mounting type with 2P+E 3 PIN controlled by suitable rating equvalent 2 pole MCB as per site requirement concealed/ mounting on surface of the wall/pillar by supplying all necessory fixing accessories. Make:Legrand / Havells / L&T.

MCB ENCLOUSER: Supply fixing, testing and proving of 4 pole 32A rated industrial MCB with suitable metal enclouser. The MCB box shall be concealed / mounted on surface of the wall/ pillar or on suitable iron angular frame as per site requirement, including grouting materials such as cement for patch works complete. Make:Legrand / L&T

MCB ENCLOUSER: Supply fixing, testing and proving of 4 pole 63A rated industrial MCB with suitable metal enclouser. The MCB box shall be concealed / mounted on surface of the wall/ pillar or on suitable iron angular frame as per site requirement, including grouting materials such as cement for patch works complete. Make:Legrand / L&T

REMOVAL OF ITEMS: Removal, Dismantling, Shifting & Handing over of Cable terminations, PVC / MS conduit pipes with wiring, Cables, Switch Boards, Switch Socket Boards, Tube light fittings with down rods etc. as per the direction of in charge engineer. The removal and shifting shall be done for above materials with all accessories complete at SLRDC Laser room 1 and 2

PROVIDING OF LED LIGHT LUMINAIRE: Supply & Fixing of 4 feet 2*20 Watt, Industrial batten with two numbers Industrial LED Tube lights on wall/roof/ existing fixture as per site condition with all necessary accessories. make : Philips/Wipro/CGL / / FA /Havells / Bajaj

5 PAIRTELEPHONE CABLING: Supply and Iaying of 5 Pair unarmoured 0.50 mm dia of each strand,telephone cable in a suitable rigid PVC conduit of 2mm thickness with allnecessary bend, junction boxes and other acceessories. Make: Amp /Finolex/Dlink / Mazda / polycab