Loading
Loading…
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | 1₹3.5 LAccepted-AOC KANARAN S O 40 YEARS CHENIKANDITHAZHA MEPPAYUR P O KOYILANDI TALUK KOZHIKODE DISTRICT KERALA | 1 | Accepted-AOC LOWEST | |
| 2 | Rejected-Technical | - | Rejected-Technical 369379.40 |
| Sl No | Description | Qty | Unit | RANJITH T M L2 | ANEESH K L1 |
|---|---|---|---|---|---|
| 1.00BUILDING COMPLETION | |||||
| 1.00 | 50.6.1.2:Solid block masonry using pre cast solid blocks (Factory made) of size 40x20x20cm or nearest available size confirming to IS 2185 part I of 1979 for super structure up to floor two level thickness 20cm and above in: CM 1:6 ( 1 cement: 6 coarse sand) etc complete. | 4.73 | cum | 7,251.83 ₹34,301.16 | 6,906.51 ₹32,667.79 Lowest |
| 1.00 | 13.1.1:12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand) | 110.42 | sqm | 356.61 ₹39,376.16 | 339.63 ₹37,501.27 Lowest |
| 1.00 | OD253487/2025-2026:Providing and fixing GI welded mesh size 25x25 mm having 3.2 mm wire dia, including
welding to existing frames complete as per the direction of Engineer-in- charge. | 40.63 | sqm | 1,019.41 ₹41,418.63 | 970.87 ₹39,446.45 Lowest |
| 1.00 | 13.61.1:Painting with synthetic enamel paint of approved brand and manufacture to give an even shade:Two or more coats on new work | 40.63 | sqm | 159 ₹6,460.17 | 151.43 ₹6,152.6 Lowest |
| 1.00 | OD253573/2025-2026:Providing and laying 60 mm thick factory made cement concrete interlocking paver block
made by block making machine with strong vibratory compaction, of approved size, design
& shape, laid in required colour and pattern over and including 50 mm thick compacted
bed of 6mm metal , filling the joints with fine sand etc. all complete as per the direction of
Engineer-in-charge | 150 | sqm | 1,142.1 ₹1,71,315 | 1,087.71 ₹1,63,156.5 Lowest |
| 1.01 | 21.1.1.1:Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS : 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminnium snap beading for glazing /paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge.(Glazing, paneling and dash fasteners to be paid for separately):
For fixed portionAnodised aluminium (anodised transparent or dyed to required shade according to IS : 1868, Minimum anodic coating of grade AC 15) | 21.87 | kg | 524.85 ₹11,478.47 | 499.86 ₹10,931.94 Lowest |
| 1.01 | 21.1.1.2:Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS : 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminnium snap beading for glazing /paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge.(Glazing, paneling and dash fasteners to be paid for separately):
For fixed portionPowder coated aluminium (minimum thickness of powder coating 50 micron) | 31.13 | kg | 563.93 ₹17,556.83 | 537.08 ₹16,720.91 Lowest |
| 1.01 | 21.3.1:Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of Engineer - in -Charge. ( Cost of aluminium snap beading shall be paid in basic item):With float glass panes of 4.0 mm thickness (weight not less than 10kg/sqm) | 6.26 | sqm | 1,233.35 ₹7,720.77 | 1,174.62 ₹7,353.12 Lowest |
| 1.01 | OD255375/2025-2026:
PROVIDING AND FIXING PRECOATED GALVANIZED IRON PROFILE SHEETS APPROVED BY ENGINEER INCHARGE 0.35mm (+0.05%) TOTAL COATED THICKNESS WITH ZINC COATING AS PER IS-277 IN 240Mpa STEEL GRADE AND SHOULD BE SUPPLIED IN SINGLE LENGTH OF 12 METERES OR AS DESIRED BY THE ENGINEER IN CHARGE.THE SHEET SHALL BE FIXED USING SELF DRILLING SCREWS WITH EPDM SEAT COMPLETE UP TO ANY PITCH ECLUDING THE COST OF PURLINS,RAFTERS AND TRUSSES AND INCLUDING CUTTING TO SIZE AND SHAPE WHEREVER REQUIRED.
DETAILS OF COST FOR 216.14SQM (EXTERNAL DIAMENSION OF PLINTH)
AREA OF ROOF = 20.20 X 10.70M = 216.14 SQM
SHEETS USED = 20 NO.S X 10.70 M X 1.06 M = 226.84SQM
ADD 3% WASTAGE = 6.81
TOTAL = 233.65 SQM | 35.35 | sqm | 493.35 ₹17,439.92 | 469.86 ₹16,609.55 Lowest |
Tender Value
₹3.5 L
EMD Value
₹8,795
Closing Date
23 Sept 2025, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
O/O AE LID AND EW SECTION
O/O AE LID AND EW SECTION
MAINTENANCE WORKS
2025_LSGD_797731_1
AE/KZR/25-26/24
Open Tender
Civil Works - Buildings
Item Rate
KEEZHARIYUR GP
Please refer Tender documents.
7 documents required · 7 mandatory
₹780
Yes
₹8,795
Yes
30 Oct 2025
16 Sept 2025
25 Sept 2025
16 Sept 2025
23 Sept 2025
16 Sept 2025
stage.html
html • 0.04 MB
tech_eval.pdf
fin_eval.pdf
aoc.pdf
finance_1321622.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .