REPAIR MAINT AND IMPROVEMENT OF LT DISTRIBUTION NETWORK LT PANEL FP BOX AND OTHER ALLIED WORKS IN SECTOR C OTM AND MD ACCN AREA IN ARMY AREA JODHPUR

Amount

Excavation in trenches not exceeding 1.5 m wide and not exceeding 1.5 mtr in depth for laying of cables, erection of poles, struts/stays, leveling of yard etc not exceeding 10 M² on plan and not exceeding 1.5 mtr in depth and getting out in soft/loose soil.

M&L for sand cushioning to underground cable with tibba sand and consolidation complete all as specified and as directed. Thickness of the sand shall be measured after punning.

Supplying and laying un-reinforced precast concrete cable cover, class LV, Type I, flat, size 250 mm x 150mm x 40mm complete laid over the cable perpendicular to the cable for protection complete all as specified and as directed.

Returning, filling in, including spreading, leveling watering and well ramming in layers n.exc 25 cm in soil.

Removing of excavated soil not exc. 50 mtr from starting points all as directed.

Excavation in trenches not exceeding 1.5 m wide and exceeding 1.5 m in depth upto 3.0 m for erection of poles, struts/stays, leveling of yard etc not exceeding 10 M² on plan and getting out in soft/loose soil.

M&L for PCC (1:3:6) type C -2 using 40 mm graded stone aggregate for foundation of pole /struts/stay assembly etc complete all as specified and directed.

M&L for PCC (1:3:6) type C -2 using 20 mm graded stone aggregate for pedestal of poles/copping including necessary form work, fair finishing to exposed surfaces without using extra cement complete form, all as specified and directed.

M&L as in replacement for XLPE insulated, amoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 25 sqmm 4 core complete all as specified and as directed.

All as Item No 9.00 but for 35 Sqmm, 3.5 Core.

All as Item No 9.00 but for 50 Sqmm, 3.5 Core.

All as Item No 9.00 but for 70 Sqmm, 3.5 Core.

All as Item No 6.00 but for 95 Sqmm, 3.5 Core.

M&L in replacement of danger notice plate of 1.6mm thick mild steel sheet, vitreous enameled white, with letters, figures and conventional skull and bones in signal red color and fixed with M.S. clamps, bolts and nuts of approved size, for LT, 20x15cm size complete all as specified and as directed..

Re-routing/relaying of existing LT cable XLPE insulated aluminium conductor armoured with galvanised steel wire complete of any size and core from any position i.e. ground/wall/poles/culverts etc complete with protection pipe all as directed by Engineer-in-charge. Note:- (i) Old cable as obtained shall be re-used. (ii) OLd serviceable protection cover, protection pipe and sand obtained under this item shall be reused if found serviceable. (iii) Earth work and any other new items shall be measured and paid separately under relevant items.

S&F as in replacement of GI tubing of size 80mm bore, light grade for protection of cable on pole/under road crossing complete al as specified and as directed.

All as Item No 12.00 but for 50 mm bore

All as Item No 12.00 but for 40 mm bore

M&L for Auguring/ Driling /Boring of holes under road, pavement, hard standing by trenchless technology by manual /machine, including fixing of HDPE pipe of 100 mm dia complete all as specified and directed.

Cleaning and re-filling of fire extinguisher of 01 Kg capacity, DCP (dry chemical powder) type including filling media/material and replacement of required accessories for ready to use complete all as specified & directed.

All as Item No 14.00 but for 6 Kg capacity.

All as Item No 14.00 but for 22.5 Kg capacity and but for CO2 type

M&L for disconnecting and re connecting of burnt LT XLPE cable to OH conductor on pole/ equipment including removing of faulty part of cable, preparation of cable for connection, suitable AL lugs, nut bolts etc and as directed on site. Note: The cost of earth work for taking out LT cable loop and refilling shall be included in quoted rate of this item.

M&L for replacement of prestressed cement concrete poles 9 M long of size 102 mm x 172 mm at top and 102 mm x 279 mm at bottom class-10, conforming to relevant latest IS including dismantling and refixing of cross arm, security light fittings, brackets or any other existing fittings etc connecting, testing including dismantling and removal of broken pole and coping complete all as specified and directed at site. Note : - (i) Earthwork, PCC shall be measured and paid separately under relevant item. (ii) The cost of removal of dismantled items from site shall be included in quoted rate of this item.

M&L for replacement of steel structure, cross arms, bracing supports, clamps, back plates of any type, section incl. nuts, bolts, washers, welding, fabrication/bending cold or hot in any size and shape required at site complete applying of two coats of aluminum paints over a coat of red oxide primer incl dismantling complete all as directed.

Dismantling of insulators any type any size from existing poles all as directed.

Fixing only insulators of any type and any size complete all as specified & directed. Note:- Serviceable insulators shall be used retrieved from item No 18.00

S&F pin type porcelain insulator, vitreous white, brown or green including one galvanised mild steel spindle and two GI washer and GI Nuts 100 mm height 65 mm dia for 1100 volts grade complete all as specified and directed.

S&F shackle type, porcelain, vitreous, white, brown or green insulator 1100 volt grade 75 mm in height and 90 mm dia including galvanised mild steel straps of size 30 x 3 mm, insulator bolt of 12 mm dia, washers and nut complete all as specified and directed.

Supply, fixing, stringing, testing and commissioning of ACSR insulated rabbit conductor of size 6+1/3.35 mm (as phase wire) binding with insulators including binding material and connection of all service connections/existing cables and taking out old conductor complete all as specified and as directed. Note :- The cost of dismantling of old conductor shall be included in quoted rate of this item.

All as above item No 22.00 but bare conductor (asneutral wire)

S&F as in replacement of FRP Junction box of size 250x200x100 mm, made out of polycarbonate with glass fiber reinforced, weather proof, environment friendly, recyclable, UV resistant, halogen & silicon free, anti acid & anti corrosive, IP-65 rated including M32 cable glands of suitable size, connector of suitable size for 3 phases supply and SP MCB upto 2 Amps rating complete all as specified and directed.

M&L in replacement for stay assembly complete with 230x230x 6 mm thick plate and 16 mm dia stay rod all as shown in elect plate No-1 of SSR-part -1 including stay wire of size 7/4mm dia and suitable loop insulator of appropriate size all as specified and directed by Engr in charge. Note : The cost of excavation in any type of soil, PCC for stay and dismantling of old stay assy shall be included in this quoted rate of this item..

M&L for Trimming and pruning of one tree complete cutting of all branches of any dia but not exceeding 75 mm up to a safe distance from the over head lines complete all as directed at site and disposal of branches/bushes to a distance and clearing the site all as directed by AGE EM-III. NOTE:- 1. The necessary man power, tool & plant, cutting tools and JCB required for cutting/pruning of branchesshall be included in the quoted rate of this item. 2. Proper shut down shall be taken by the authorised rep only before commencement of this Job.

M&L for ZEBRA painting of PCC poles 9/11 m long alongwith road upto 1.5 m height from pedestal, with two coats of synthetic enamel paint in 30 cm height including painting of pole and PCC coping with white paint complete all as specified and directed.

M&L for two coats of enamel synthetic silver paints over a one coat of red oxide to steel tubular pole/rail pole upto 9 mtr long and PCC coping with white paint complete all as specified and directed. Note : - The bottom of Pole upto height 1.50 mtr from pedastal shall be Zebra painting without any extra cost.

M&L for writing pole number of minimum 10 cm height with black paint over base of yellow paint on PCC/steel poles of LT supply complete all as specified and directed.

Supply and fix in replacement spreader terminals including required size nut, bolt etc suitable for MCCB, FP, 63 to 100 Amps complete all as specified and as directed

All as Items No 30.00 but suitable for MCCB, FP, 160 to 250 Amp

All as Items No 30.00 but suitable for MCCB, FP, 400 Amp

M&L for replacement of unserviceable voltmeter/ Ammeter, Panel mounted with three phase nultifunctional meter having accuracy class-1.0, input voltage measurement range 50-520 VAC (P-P), aux supply 80-300 VAC, flush mounting 96 x 96 m, in-built CT/PT programmable for measuring VLL, VLN, A,PF, On Hrs, RPM, A peak etc including all connections and fixing amangements complete all as specified and as directed.

M&L for replacement of old unserviceable indicators any type with LED based indicating lamps of RYB colour including disconnecting and connecting of the same complete all as specified and directed.

M&L for replacement of old unserviceable CT of LT Panel /Feeder pillar box with CT of ratio upto 400/5 Amps or as required at site according the load incl connecting, disconnecting and testing complete all as specified and directed at site.

Earthing complete with galvanized steel earth plate electrodes 600mmx600mmx6 mm thick buried directly in ground earth (earth pit not less 2.25 m deep below ground level) with top edge of the plate not less then 1.5 mtr below normal ground level connected to galvanised iron earthing strip 32mm x6mm thick by means of bolt nuts check nuts and washers of galvanized iron or steel all as specified & shown in electrical plate No.3 of MES SSR part-I 2009 connected to earth test point as specified and testing on completion including provision of 40 mm dia light grade pipe up to 7.5 mtr length as protection & watering pipe shall be 20 mm bore medium grade including all excavation & earth work in any type of strata incl PCC pit (1:3:6) type C-1 with RCC cover including charcoal , salt, funnel, all as directed at site. Note : The cost of dismantling of old earth pit and removal from site shall be included in the quoted rate of this item.

M&L for spray painting to outdoor type double door LT panels/feeder pillar box and replacement of door hinges, sliding bolts, cable entry MS sheets, cable glands, pedestal locks, bow handle and connected accessories where required by welding, cutting, drilling etc and incl fixing with MS nuts and bolts including two coats of spray painting by synthetic enamel paint complete all as specified and directed. Note:- Panel shall be vermin proof and close properly after repair.

S&F as in replacement of manual draw out, air circuit breaker, 4 pole, 3 phase, 415 volts, 50 Hz of rating 630 amps and breaking capacity 50KA, thermal magnetic protection all conform to IS/IEC 60947-2 & IEC 60947-2 including any fixing accessories and testing complete all as specified and as directed.

M&L for LT end termination, heat shrinkable, out door type, suitable for XLPE Cable of sizes 95 to 150 sqmm 3.5 core 1100 volts grade complete including disconnection and connection of LT cable to OH line complete all as specified and directed .

All as Item No 39.00 but of size 185 to 400 sqmm, 3.5 core

All as item No. 39.00 but for indoor type and of size 95 to 150 sqmm, 3.5 core.

All as item No. 39.00 but for indoor type and of size 185 to 400 sqmm, 3.5 core.

All as item No. 39.00 but for straight through of size 35 to 70 sqmm, 3.5 core.

All as item No. 39.00 but for straight through of size 95 to 240 sqmm, 3.5 core

Supply , installation and testing in replacement of GI earthing pit, chemical earthing, CPRI tested, maintennce free, compound based, pipe in pipe technology, 100-150, micron copper bonding earthing electrode not less than 40mm dia and 3.00 mtr long, filled with back fill compound (BFC) having high current conductivity and rust resistive property around the earth electrode, upto the ground level, connected with 25 x 3mm copper strip from electrode terminal upto 7.5 mtr long, including all excavation & earth work in any type of strata incl PCC pit (1:3:6) with RCC cover all as directed at site.

Supply, fixing, testing and commissioning as in replacement of LT Panel board, outdoor type, floor mounted, factory made CPRI approved suitable for 415 volt, 3 PH, 4 wire, 50 Hz, AC supply system having bus bar chamber with copper bus bars duly insulated by insulation of RYB colure 400 Amps rating mounted on porcelain insulators. The panel shall be powder coated, factory made double door made out of 3.15 mm thick MS sheet totally enclosed dust, vermin and rust proof front operated, front and rear opening with locking arrangement fixed with MS angle iron frame of size 40mm x40mm x6mm duly embedded in PCC (1:3:6) type C-1 platform and including wiring of multistranded copper cable of suitable size including lugs and cable gland to incoming and outgoing cables and re-routing of LT cables of change over within 10 mtr of distance etc all as directed at site and comprising of following:- (A) IN COMING:- (a) MCCB 4 Pole 415 volts 25 KA 250 Amps rating microprocessor release type (Icu=Ics=100%) - 01 Nos (b) Panel mounted multifunction energy meter of accuracy Cl-0.5 rating - 01 No (c) RYB LED indication lamp panel mounting type (Set of three) - 01 No (B) OUT GOING :- (a) MCCB 4 Pole 415 volts 25 KA 160 Amps rating TM adjustable type - 01 Nos (b) MCCB 4 Pole 415 volts 25 KA 100 Amps rating TM fixed type - 02 Nos (c) MCB TPN 415 volts 10 KA 63 Amps - 01 Nos

Supply, fixing, testing and commissioning as in replacement of LT Panel board, outdoor type, floor mounted, factory made CPRI approved suitable for 415 volt, 3 PH, 4 wire, 50 Hz, AC supply system having bus bar chamber with copper bus bars duly insulated by insulation of RYB colure 400 Amps rating mounted on porcelain insulators. The panel shall be powder coated, factory made double door made out of 3.15 mm thick MS sheet totally enclosed dust, vermin and rust proof front operated, front and rear opening with locking arrangement fixed with MS angle iron frame of size 40mm x40mm x6mm duly embedded in PCC (1:3:6) type C-1 platform and including wiring of multistranded copper cable of suitable size including lugs and cable gland to incoming and outgoing cables and re-routing of LT cables of change over within 10 mtr of distance etc all as directed at site and comprising of following:- (A) IN COMING:- (a) MCCB 4 Pole 415 volts 25 KA 100 Amps rating microprocessor release type (Icu=Ics=100%) - 01 Nos (b) Panel mounted multifunction energy meter of accuracy Cl-0.5 rating - 01 No. (c) RYB LED indication lamp panel mounting type (Set of three) - 01 No. (B) OUT GOING :- (a) MCB TPN 415 volts 10 KA 40 Amps - 01 Nos (b) MCB SPN 240 volts 10 KA 32 Amps - 05 Nos

M/S SUMAN ENTERPRISES

M/s Bhagwati Construction Company

Nvimal Engineers and Contractor

Shri Electrical Enterprises